BMW R1200GS [2010] GEARBOX OIL CHANGE. The Old Mechanic his own R1200GS 👨‍🔧---🏍

Поделиться
HTML-код
  • Опубликовано: 11 окт 2024
  • In this video I am going to show you how very easy it is to do YOUR OWN MOTORCYCLE MAINTENANCE.
    This video is how to change your GEARBOX OIL on a BMW R1200GS (2010-).
    HAVE A LOOK IN The Old Mechanic his tool store: www.amazon.com...
    For MORE maintenance video's in this series have a look at my playlist:
    • BMW R1200GS [2010] OIL...
    Motorcycle maintenance made easy by: The Old Mechanic
    #TheOldMechanic #motorcyclemaintenance #spiritofgs

Комментарии • 79

  • @bryancoombesart
    @bryancoombesart Месяц назад +3

    The Old Mechanic taught me how to work on my bike, amazing work mindset, doesn't get upset when oil dumps- laughs, uses flashlight to visually verify level, marks with crayon for torque, so many great lessons. Thanks Old Mechanic!

    • @TheOldMechanic
      @TheOldMechanic  Месяц назад

      Thank you very much 🙏🏻👍🏻👊🏻😉

  • @jimmann5364
    @jimmann5364 Год назад +6

    I feel SO MUCH BETTER knowing I'm not the only person this kind of thing happens to! 😁😁 Love your videos!

  • @jonnygrey340
    @jonnygrey340 5 месяцев назад +2

    I changed my gearbox oil last weekend - my centre stand is now also fully lubricated ! 👍

  • @johnsullivan7262
    @johnsullivan7262 Год назад +3

    I love your shop rag on a roll !!

  • @lostinaz7220
    @lostinaz7220 2 года назад +5

    Hello from Arizona! Thank you for these great videos!

  • @p_vervoort
    @p_vervoort Год назад +3

    Hallo, geweldige video, ...., wederom :-) Wel een kleine tip, in plaats van "te klooien" met een stukje karton, kan je ook een trechter gebruiken met een stukje binnenband van een fiets (bevestigd met een tie wrap) tot in de olielekbak. Je kan de trechter gewoon laten hangen (mits de juiste grootte) en de bout erin laten vallen. Dat scheelt een heleboel gedoe ;-) Wel opletten dat de bout dan het gat van de trechter niet blokkeert ;-). Oh ja, nog vergeten, wel de vulplug laten zitten zodat de olie er "gecontroleerd" uitloopt :)

  • @mohammedsharaff2249
    @mohammedsharaff2249 2 года назад +3

    Very informational and entertaining video TOM, I really enjoy your videos and kudos on mentioning the storage setting tip for the mechanical torque wrench that's a very important tip also. Cheers!

  • @parkerlathrop7284
    @parkerlathrop7284 6 месяцев назад

    Thank you from Kansas City, Missouri!

  • @Rumata_111
    @Rumata_111 4 месяца назад +1

    Какой приятный дяденька.
    подпишусь , пожалуй.

  • @robertjohansson3661
    @robertjohansson3661 3 месяца назад

    Why is the magnetic plug to the gearbox not in the bottom of the gearbox ?
    Thanks for another great video. Robert in sweden

  • @allanhughes7859
    @allanhughes7859 Год назад +2

    I love bloopers because that's how I work one blooper after another but I do get there in the end and still do a better job than most mechanics "because I care" Sorry to those mechanics that do care because you are out there I know ?? I have simply not met you yet !!

    • @TheOldMechanic
      @TheOldMechanic  Год назад

      Bloopers shows that we are all human 😉👍🏻👊🏻

  • @kbikerider8474
    @kbikerider8474 Год назад

    We all have a spill of oil once in a while. Nice job overall.

  • @SteveColen
    @SteveColen Год назад +1

    “Smackidy Smack” the like button now!

  • @eliterry3785
    @eliterry3785 2 года назад +2

    English is my one and only language and you speak it better than I do! BTW when I die, I want to leave my bike to you because I think so highly of it. 🤣

  • @ВладимирМакаренко-к8ь

    Спасибо! Теперь буду знать🙂

  • @misterbaleize
    @misterbaleize 4 месяца назад +1

    Very helpful; Thank you.

  • @motorjock5119
    @motorjock5119 Год назад +1

    Great video my friend.

  • @musgrave3232
    @musgrave3232 2 года назад +1

    Funny old man! Good information.

  • @wandilsontelesgomes5842
    @wandilsontelesgomes5842 Год назад +1

    You’re great! Thanks

    • @TheOldMechanic
      @TheOldMechanic  Год назад +1

      You're welcome! 👍🏻👊🏻

    • @wandilsontelesgomes5842
      @wandilsontelesgomes5842 Год назад

      @@TheOldMechanic . As I said you’re great! Brilliant and lovely personality. I am new here, but I intend to stay for a very long time. Obviously invite lots of friends. Just sent one of your videos to Brazil. Thanks again

  • @mojah1
    @mojah1 2 года назад +1

    Thanks for sharing

  • @MsAryan29
    @MsAryan29 6 месяцев назад +1

    Good job

  • @richardho5955
    @richardho5955 22 дня назад

    How do you keep your exhaust pipes so clean?!! 😳🤷‍♂️

  • @hstapes
    @hstapes Год назад +1

    Manual on my '06 calls for 75w140. Did this change for later bikes, my manual is wrong, or The Old Mechanic has his own way? Anyone know?

  • @wollywolly2734
    @wollywolly2734 2 месяца назад

    .7 liter would be 700 milliliter. Filling to bottom of drain hole is a over fill of about 8 ounces or 242 ML
    Does it state in maintenance manuals to fill to overflow?
    8 ounces is a serious overfill of the transmission case

  • @motorcyclistfromholland8856
    @motorcyclistfromholland8856 2 года назад +1

    vraagje. BMW schrijft in de handleiding 75W90 voor maar heel veel BMW motor garages gebruiken ook 75W140? Waarom en kan dat zomaar.

  • @Mv-mp3gy
    @Mv-mp3gy 10 месяцев назад +1

    Awesome

  • @harrykramer7479
    @harrykramer7479 Год назад

    Mijn vulplug van de versnellingsbak zit erg vast. Heb je nog tips en ideeën om deze los te krijgen?
    Groet! BoxerHarry

  • @jerrykan546
    @jerrykan546 2 месяца назад +1

    Hello, "Old Mechanic" I get a big problem... Impossible to release the filling cap of the gearbox. It is very damaged and no traditional tool has a grip... It must have been too tight in the past... What methods can I use to be able to loosen it without damaging the aluminum housing... I bought a cold spray... Can you hit with a hammer and chisel. As a last resort, can you drill through the nut (cap)
    Thank you for your help, I’m really in trouble ... :-(

    • @TheOldMechanic
      @TheOldMechanic  2 месяца назад +1

      That can be a real pain in the... Maybe use a small blowtorch and heat just the plug, and see if you can carefully hammer an oversized allen or torx bit in and give that a try. Let me know how that went 👍🏻👊🏻

    • @TheOldMechanic
      @TheOldMechanic  2 месяца назад +1

      maybe this one can help: amzn.to/3M3L3KY

    • @jerrykan546
      @jerrykan546 Месяц назад

      @@TheOldMechanic
      Thank you for your reply:-)
      Initially, I thought rather heat the housing of the gearbox and cool only the cap so that it retracts alone... ?????
      I will do this intervention in September because I go on a road trip next week... :-)

  • @jerrykan546
    @jerrykan546 2 года назад +2

    Hi, from France !!! Supers vidéos !!! Do you really have to wait 2 days to put in new oil ? 🙂 Is it possible to have more subtittle on your videos ? thank you 🙂

    • @TheOldMechanic
      @TheOldMechanic  2 года назад +2

      Hi Jerry, its the way I do an oil change, I got all the time in the world. 😂😂👍🏻

    • @jerrykan546
      @jerrykan546 2 года назад +1

      @@TheOldMechanic OK, I will be retired next year, I think I will choose this philosophy Thank you!

    • @TheOldMechanic
      @TheOldMechanic  2 года назад

      👍🏻👍🏻👊🏻🏍

  • @fredlgs1601
    @fredlgs1601 2 года назад

    Sehr Genau erklärt, wie immer...Danke

  • @frankpfeiffer7645
    @frankpfeiffer7645 2 года назад +1

    Hi, first "i really enjoy your videos !!!" I have a question regarding the gearbox. today, with my R1200GS 2008er i recognize a little "riddle riddle riddle" when waiting in neutral without pulling the clutch. if i pull the clutch, the noise is gone......can you give me some advice :-)

    • @nikolagranzov7562
      @nikolagranzov7562 9 месяцев назад

      I have the same noise change when i do the same

  • @ivanfkcz
    @ivanfkcz 6 месяцев назад

    How much KM does it take to change the oil in the gearbox? thank you

  • @Steve-bl8rx
    @Steve-bl8rx Год назад +1

    Does the R1200GS have the same engine as the 2011 R1200RT

  • @a.k1311
    @a.k1311 3 года назад +1

    Waar bent u gevestigd, u mag mijn R1150r onder handen nemen..!

  • @mahsikb
    @mahsikb 2 года назад +1

    What's the recommended time to change this oil? Every 60000km?

  • @a.k1311
    @a.k1311 3 года назад

    Shims in het Engels meneer….👍🏽

  • @JohnWilliams-ge7eh
    @JohnWilliams-ge7eh Год назад +1

    Hi do I put the same oil in the gearbox has the rear drive thanks.

  • @ВладимирМакаренко-к8ь

    Opa😁😁😁 👍international.! По-русски, по-украински,.... ОПА!

  • @reggiecastelijns2631
    @reggiecastelijns2631 2 года назад

    Waar zit U ?
    Mag U mijn R1200gs lc beurt geven 2013

  • @daveo9844
    @daveo9844 3 года назад

    Don’t worry, I’ve had my fair share of bloopers 😅

  • @talltimbot
    @talltimbot Год назад

    Fill it up,,, with what?

  • @johnschotz1614
    @johnschotz1614 2 года назад +1

    60.000km for a boxer is nothing. If well maintained these engines are rock solid.

  • @georgenauss2670
    @georgenauss2670 2 года назад +1

    Your crayon is a witness mark?

    • @TheOldMechanic
      @TheOldMechanic  2 года назад

      Hi George, for myself. Afterwards I can see with a quick view if all bolts are fastend up to spec.

  • @azr2d1
    @azr2d1 2 года назад

    why would you have a magnet on a filler plug. makes no sense.

  • @jgruen9854
    @jgruen9854 Год назад

    Is there anyway to do this without making a mess?

  • @Cinepobrefilmfestival
    @Cinepobrefilmfestival 2 года назад

    ve ar gonna screw it in

  • @BrandViolation
    @BrandViolation 2 года назад

    What can you do but laugh?