I appreciate showing the fail and what contributing factors there may have been. Too many people don't appreciate that failure is part of success. Particularly during the learning process. Good job.
Just a bit of advise, a tack clothe works better when it’s fully opened and then lightly balled up, helps activate the adhesive in it. Also when sanding with high grit paper you should use wet, avoids the paper clogging up and causing pig tail scratches in your finish which can show up after polishing since it’s basically gouging into your topcoat.
As a fan of simple tools that make life easier, I think you would benefit from a few different sizes of 'notched' adhesive spreaders, for your gel coat. The notches are small and when the correct size is selected, it'll let you spread the gelcoat around a large area while leaving the right amount behind. This'll let you get the coating over the whole area quicker and prevent extra work needed to fix thin/thick pots.
Honestly what I'm impressed with the most is your ability to not have a gigantic mess, the few times I've delved into composites yielded good results but awful messes hahaha
I think you could make this a lot easier if you wetted the carbon fiber all the way through at first and then used a perforated film with a breather layer under vacuum to get all the excess resin out. Then just quick sanding and you got a nice even surface without these darker spots
Too many people try the AvE editing method these days and just don't accomplish the humor he has with out being funny. That said, thanks for taking the time to film edit and upload this.
You should never have used gelcoat, instead a thin layer of epoxy to establish the wood surface. Once cured you then place the carbon cloth wet and align the weave.
I really like your simple videos, no narration or music. Next time you want a mirror finish on a flat surface just use glass and then bond your laminate to the MDF board.
Or do as you say and lay up on the glass, then add the baseboard and wrap the carbon around it... It's how I would do it, and would use a clear gelcoat or initial layer of epoxy with lightweight glassfibre before laying in the carbon.
it was amazing. i worked with epoxy resin for about 2 years and i always wanted to use carbon fiber in my projects. with watching this video, i am going to do it. thanks for sharing the video. just need to know about the epoxy you used on the pallet, can i use ordinary resin instead or it is special?
Hi There Thank you for the video techniques with carbon fibre I have a questuon Hiw would you approach a conical shape 40cm diameter 30cm height Maybe one sheet to cover it all ar once or in pieces or any other way Much apprieciate your help Best
드디어한국에도 이렇게 영상올리시는분이 나오네요 저는 대농인프라 김준석 상임연구원이고 탄소섬유대량생산 신기술 및 특수용액으로 코팅제 개발하여 우레탄 및 어떤 도색을해도 핀홀이 하나도없게 제작이 가능합니다 ㅎㅎ 저도 처음에 클리어코트 열나게 3번씩 갈아내고 핀홀잡았던 기억이나네요 ㅎㅎ
@@ECOLAPStudio 저희는 대기업 및 한국탄소융합기술원 같이 대량생산이 필요한 곳에 맞춰 연구하다보니 개발이 완료되었습니다 ㅎㅎ 또한 아시다시피 클리어 코팅 수지로 코팅하시면 광택도 광택이지만 작업이 한번에 끝나는 것이 아닌 황변이 너무 심하며 충격에 왔을때 크랙이 온다는 점이 문제점입니다. 우레탄 클리어는 uv차단효과와 황변억제가 되어있으며 깨지지않는다는 장점이 있죠 ㅎㅎ 아시다시피 우레탄 도색을 올리고 싶어도 올리기 어려운게 현상황입니다. 그러다보니 3년동안 연구해서 도막을 형성해주는 특수 물질을 개발하였고 아마 우레탄 도색과 같은 클리어 페인트로 마감 되신다면 굉장히 편한 작업성을 느끼실 겁니다 ㅎㅎ 아직판매는 안하고있구요 저도 유튜버님처럼 열정을 가지고 탄소섬유 제작하시는 분들을 응원해드리고 싶습니다 ㅎㅎ xlfkshek1004@naver.com으로 연락주시면 재밌는 이야기 많이 나눠볼 수 있을 것 같습니다
I would make it other way. Take a glass as a base. Lay epoxy, then carbon. Use roller to remove bubbles. Then put board on top and vacuum it. You should get nice clean surface.
Sei un genio !!!! Volevo un consiglio devo fare delle parti di carbonio alla mia Maserati ma vorrei mettere sotto la pellicola carbonio e sopra la resina che ne dici ? Potrebbe resistere?
Hi, buddy! ruclips.net/video/OrcN5b62mF4/видео.html Please watch this video. This url is working on carbon fiber interior. In carbon skinning, it is very important to apply epoxy resin and leveling the surface. You have to apply epoxy resin many times. When leveling the surface, be careful not to damage the carbon fiber cloth. I hope you can make a good carbon fiber parts. If you have question, please reply. Thank you for watching. ^^
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/
Nice work I love the videos keep up the good work. If I was to make the same thing I would do one the methods some the companies use to make flat sheats and use a sheet of glass or 2 to keep it truly flat and no MDF so it's just carbon. And use carbon tubes for the legs and or aluminum.
Hello, Buddy! If you have epoxy resin and gel coat, it doesn't cost much. Carbon fiber and MDF plates cost approximately $ 100 or less. I hope you helpful.
Hello, Buddy! I do not reuse brushes. I buy and use several cheap brushes (approximately 5 cents). If you want to reuse the brush, you can wash it with acetone. However, it cannot be reused much.
can 2k clearcoat in a can spray be used instead of a polish compound and buffing after the surface has been sanded down? Or will it still show the sanded parts? Thanks
Yer use UV clear coat spray Do wet sand first and acetone to clean spray coat 50mm over spray wait few minutes to go over again don’t let it dry or the edges after 3/4 coats let dry 12 hours then do your polish
Great channel, just subscribed. I understand that you had too much gelcoat the first time. But why did you even bother putting on gelcoat? Couldn't you just have put epoxy resin on top?
Hello, Buddy! It could also work with epoxy resin. However, it is recommended to use a gelcoat. There are several reasons to use a gelcoat. First, the gel coat is very viscous and does not flow down. And, the base color of the parts can be covered with black epoxy gelcoat. I hope you helpful. Thank you for watching.
Knudsen Allan yes your right, it’s cheaper just to make your own “Gel Coat” or thicker resin. He could’ve added black pigment to the resin. And to thicken it a bit also he could’ve added glass microspheres to it. It’s pretty much the same instead of spending extra money surface coat
I have a couple questions you gave me the idea to a flat door panel and I am thinking of using you method since is practically all I need to do is use this same format. What kind of gel coat is that.
Sure that theirs things for everybody’s tastes, but I find the look of natural carbon fibres with gloss absolutely WOW, but the cost is so high, you really have to be a maniacs of it, my sportbike is full of it, I even got some parts in my s.u.v., might say I’m an addict 😂😂😂😍👍
Hello, Buddy! I purchased materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html
Regarding those 152mm abrasive discs you used with the deWalt sander, which brand do you use? I recently switched over to Kovax which have better value for money than Norton.
Hello, Buddy! The sandpaper (for dewalt) I use is from Korea. It's a brand called HANKO, but I don't have any exact information about it. Hand sanding uses SIA. SIA sandpaper is very good.
@@ECOLAPStudio Hey tjanks for the speedy reply! Yea well if HANKO is Korean I'm pretty sure its quality stuff! I'm a big fan of Korean manufacturing quality standards 😊🖒
Best Kiteboarding Official why in the world would you need any of that stuff just to do an overlay? He started out ok until he put that bag over it to try and compress it, definitely didn’t need the bag.
Hello, Buddy! I am using several epoxy resins. Epoxy gel coat, laminating epoxy resin, and top coat epoxy resin were used. The epoxy resin used varies depending on the composition.
Hello, Buddy! I am making carbon fiber at home. However, it is very difficult to make carbon fiber at home. If you try, pay attention to ventilation. Also, be sure to wear a mask.
Hello, Buddy! Thank you for watching. And.. I'm buying carbon fiber and epoxy resin from online shop in Korea. However, Korean online shops do not ship overseas. So I introduce you UK online shop. Maybe you can find what you want. I hope you helpful. www.easycomposites.co.uk/#!/
Hello, Buddy! I'm buying carbon fiber and epoxy resin from online shop in South Korea. However, Korean online shops do not ship overseas. So I introduce you UK online shop. Maybe you can find what you want. I hope you helpful. www.easycomposites.co.uk
If you were to make a 3/4" thick table of carbon fiber it would cost about 2000 usd... the skin is very thin, and decorative, not able to hold any additional weight... probably 250gm/m2 carbon and likely cost him about a hundred dollars us to make a a skin...
@@drumbum7999 I'm with embino, and I do have an idea of how composite objects are made. At first I thought he was running a very thin piece as a core, but this is more of a laminate that is true carbon fiber. Or that he was using that piece to create a mold. I'm not disappointed, it is a nice looking table, but you get all of the cool looks of carbon fiber but without the lightweight benefits of carbon fiber. Granted he didn't have to lay multiple layers, add in core material, create support structures and bracing, so from a time and cost perspective, it was the best route.
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/
![How to Make a Forged Carbon Fiber Table Top [DIY] (Forged Carbon Fiber Skinning)](http://i.ytimg.com/vi/D8ywlhSQ2cM/mqdefault.jpg)
![How to Make a Forged Carbon Fiber Table Top [DIY] (Forged Carbon Fiber Skinning)](/img/tr.png)
![Carbon Fiber Plate with Epoxy Resin [DIY]](http://i.ytimg.com/vi/ri1JnCoswOE/mqdefault.jpg)
![Carbon Fiber Engine Cover with Epoxy Resin [DIY]](/img/1.gif)
I appreciate showing the fail and what contributing factors there may have been. Too many people don't appreciate that failure is part of success. Particularly during the learning process. Good job.
Just a bit of advise, a tack clothe works better when it’s fully opened and then lightly balled up, helps activate the adhesive in it. Also when sanding with high grit paper you should use wet, avoids the paper clogging up and causing pig tail scratches in your finish which can show up after polishing since it’s basically gouging into your topcoat.
As a fan of simple tools that make life easier, I think you would benefit from a few different sizes of 'notched' adhesive spreaders, for your gel coat. The notches are small and when the correct size is selected, it'll let you spread the gelcoat around a large area while leaving the right amount behind. This'll let you get the coating over the whole area quicker and prevent extra work needed to fix thin/thick pots.
Wow, just wow. This will be my next table project. Thx for sharing how to do! Amazing 😍
Honestly what I'm impressed with the most is your ability to not have a gigantic mess, the few times I've delved into composites yielded good results but awful messes hahaha
I think you could make this a lot easier if you wetted the carbon fiber all the way through at first and then used a perforated film with a breather layer under vacuum to get all the excess resin out. Then just quick sanding and you got a nice even surface without these darker spots
Too many people try the AvE editing method these days and just don't accomplish the humor he has with out being funny. That said, thanks for taking the time to film edit and upload this.
This shit is relaxing..with me being quarantined inside the house i might start carbon fiber everything now
Feel very satisfied watching the end of video 😆😆😆
this feels like it's trying to give off the vibes of that one knife making channel, and i have to admit it does it quite well
You should never have used gelcoat, instead a thin layer of epoxy to establish the wood surface. Once cured you then place the carbon cloth wet and align the weave.
Paint the board black then let set. Then use clear epoxy to adhere and cover the CF cloth. Then you have no black bleed through visible
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
I really like your simple videos, no narration or music. Next time you want a mirror finish on a flat surface just use glass and then bond your laminate to the MDF board.
Or do as you say and lay up on the glass, then add the baseboard and wrap the carbon around it... It's how I would do it, and would use a clear gelcoat or initial layer of epoxy with lightweight glassfibre before laying in the carbon.
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
指先が…
いろいろと物語るところが、
すばらしい！
Please, we need a video tutorial on how to make a carbon fiber car steering wheel. There is none on the internet
If I get a chance, I'll make it.
Thank you for the good idea.
and Thank you for watching. ^^
this guy has no clue how to make carbon fiber parts and you want a steering wheel..
Good luck..
@@ECOLAPStudio dove posso trovare quei sacchetti per mettere sotto vuoto? Grazie
Nabi, what do you mean?
There is one on RUclips if you look
it was amazing.
i worked with epoxy resin for about 2 years and i always wanted to use carbon fiber in my projects. with watching this video, i am going to do it. thanks for sharing the video.
just need to know about the epoxy you used on the pallet, can i use ordinary resin instead or it is special?
Hi There Thank you for the video techniques with carbon fibre I have a questuon Hiw would you approach a conical shape 40cm diameter 30cm height Maybe one sheet to cover it all ar once or in pieces or any other way Much apprieciate your help Best
드디어한국에도 이렇게 영상올리시는분이 나오네요
저는 대농인프라 김준석 상임연구원이고
탄소섬유대량생산 신기술 및 특수용액으로 코팅제 개발하여 우레탄 및 어떤 도색을해도 핀홀이 하나도없게 제작이 가능합니다 ㅎㅎ 저도 처음에 클리어코트 열나게 3번씩 갈아내고 핀홀잡았던 기억이나네요 ㅎㅎ
안녕하세요!
마무리를 할 때 최대한 깨끗한 면을 만들기 위해서 노력하지만 완벽한 마무리를 위해서는 어쩔 수 없이 샌딩과 폴리싱을 할 수밖에는 없었는데 핀홀이 없이 가능하다니 매우 흥미롭고 놀랍네요.
피니시용 코팅제를 별도로 판매도 하시는 건가요?
@@ECOLAPStudio 저희는 대기업 및 한국탄소융합기술원 같이 대량생산이 필요한 곳에 맞춰 연구하다보니 개발이 완료되었습니다 ㅎㅎ 또한 아시다시피 클리어 코팅 수지로 코팅하시면 광택도 광택이지만 작업이 한번에 끝나는 것이 아닌 황변이 너무 심하며 충격에 왔을때 크랙이 온다는 점이 문제점입니다. 우레탄 클리어는 uv차단효과와 황변억제가 되어있으며 깨지지않는다는 장점이 있죠 ㅎㅎ 아시다시피 우레탄 도색을 올리고 싶어도 올리기 어려운게 현상황입니다.
그러다보니 3년동안 연구해서 도막을 형성해주는 특수 물질을 개발하였고 아마 우레탄 도색과 같은 클리어 페인트로 마감 되신다면 굉장히 편한 작업성을 느끼실 겁니다 ㅎㅎ 아직판매는 안하고있구요 저도 유튜버님처럼 열정을 가지고 탄소섬유 제작하시는 분들을 응원해드리고 싶습니다 ㅎㅎ xlfkshek1004@naver.com으로 연락주시면 재밌는 이야기 많이 나눠볼 수 있을 것 같습니다
Good God that first sanding bit gave me the goosebumps lol
You need to apply ppf on it to protect against scratches ;D
What's ppf? Thanks inadvance👍
Boy, IKEA is really making their table’s assembly complicated now.
At least you'll have the trusty IKEA man to pictographically guide you through the process.
And a Legend was born.
Love all the videos man 🤙
Hello, Buddy!
Thank you for your comment.
I will make more interesting and informative videos, so stay tuned to my channel.
Thank you for watching.
Shows in detail how to fail, speeds up 1000x how not to fail
You learn more from mistakes. My problem was the slow motion baby wipe dispensing.
I would make it other way. Take a glass as a base. Lay epoxy, then carbon. Use roller to remove bubbles. Then put board on top and vacuum it. You should get nice clean surface.
Sei un genio !!!! Volevo un consiglio devo fare delle parti di carbonio alla mia Maserati ma vorrei mettere sotto la pellicola carbonio e sopra la resina che ne dici ? Potrebbe resistere?
Hi, buddy!
ruclips.net/video/OrcN5b62mF4/видео.html
Please watch this video. This url is working on carbon fiber interior.
In carbon skinning, it is very important to apply epoxy resin and leveling the surface.
You have to apply epoxy resin many times.
When leveling the surface, be careful not to damage the carbon fiber cloth.
I hope you can make a good carbon fiber parts.
If you have question, please reply.
Thank you for watching. ^^
What you put in the table in first place, the black thing
Love it, it must be super light also.
Not really because it's just made of wood. The carbon is just for looks
From France..Respect !!!
5:17 so satisfying 😅
This dude is carbon God😆🔥
I would like this man do my car all carbon fibre 👍👍
ASMR for carbon fiber lovers 😆
🤚🏽here
Ciao, sei un artista 😍dove posso comprare tutto l occorrente per realizzare questi lavori, c’è un sito italiano specializzato ? Grazie in anticipo
Strongem è coreano, quindi non penso possa risponderti. Guarda sui siti inglesi, di solito loro hanno siti più completi e spesso con prezzi migliori.
Klent Wanties ah grazie mille, i titoli li visualizzavo in italiano 😢🤣, comunque grazie spresti elencarmi qualche sito per favore ? Grazie mille 😊
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
www.easycomposites.co.uk/
Love your videos bro. You have a funny sense of humor as well lol. We want to see more projects lol😂
That thing is gonna show every finger print ever
Nice work I love the videos keep up the good work.
If I was to make the same thing I would do one the methods some the companies use to make flat sheats and use a sheet of glass or 2 to keep it truly flat and no MDF so it's just carbon.
And use carbon tubes for the legs and or aluminum.
Do you discard the brush or any other materials that you used after the project?
브러쉬는 보통 한번 사용하고 버립니다.
그렇지 때문에 비싼 브러쉬를 사용하지 않고 저렴한 브러쉬를 50~100개씩 구입해서 사용하고 있습니다.
에폭시 레진을 바를 때 사용하는 브러쉬는 솔이 너무 강하지 않은 것을 사용하는 것이 작업성이 좋습니다.
これは満足感高いですね。カーボン好きにはたまらないアイテムですね。
Change the color of your car with carbon without dyeing.
ruclips.net/video/aL5hFhQ6Dqk/видео.html
I miss Korea, thanks for the vids!!
Have you ever reshaped a steering wheel, making it flat bottom?
Hello, Buddy!
I'm sorry I don't speak English well so I don't know if I understood it well.
The floor surface is not flat.
It has a finger grip.
ECO-LAP Studio he means making steering wheel shaped just like D
Very nice, what is the approximate material cost?
Hello, Buddy!
If you have epoxy resin and gel coat, it doesn't cost much.
Carbon fiber and MDF plates cost approximately $ 100 or less.
I hope you helpful.
@@ECOLAPStudio Awesome, really enjoy your videos, keep up the good work!
@@TheFlyingPLiner Thank you.
I will make fun and informative videos.
Please, look forward to next video.
Thank you for watching.
I would like to know.. how we want to take care the brush after use the epoxy... Because if just wash.. it will be harden
Hello, Buddy!
I do not reuse brushes.
I buy and use several cheap brushes (approximately 5 cents).
If you want to reuse the brush, you can wash it with acetone.
However, it cannot be reused much.
Maybe paint the board black then let set. Then use clear epoxy to adhere and cover the CF cloth. Then you have no black bleed through visible.
I'm going to try some this week. So this is called skinning? How much is the cut of carbon fiber? I'm in the USA
can 2k clearcoat in a can spray be used instead of a polish compound and buffing after the surface has been sanded down? Or will it still show the sanded parts? Thanks
Yer use UV clear coat spray Do wet sand first and acetone to clean spray coat 50mm over spray wait few minutes to go over again don’t let it dry or the edges after 3/4 coats let dry 12 hours then do your polish
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
Hi, what brand
of bag kit use for the vacuum ?
새로운 취미를 찾던 도중에 카본diy를 보고 있었는데 넘나 잘봤습니다~~~~~
Great channel, just subscribed. I understand that you had too much gelcoat the first time. But why did you even bother putting on gelcoat? Couldn't you just have put epoxy resin on top?
Hello, Buddy!
It could also work with epoxy resin.
However, it is recommended to use a gelcoat.
There are several reasons to use a gelcoat.
First, the gel coat is very viscous and does not flow down.
And, the base color of the parts can be covered with black epoxy gelcoat.
I hope you helpful.
Thank you for watching.
Knudsen Allan yes your right, it’s cheaper just to make your own “Gel Coat” or thicker resin. He could’ve added black pigment to the resin. And to thicken it a bit also he could’ve added glass microspheres to it. It’s pretty much the same instead of spending extra money surface coat
Great video
The sound gesek gesek is very ngeress. Hatiku merinding gaes..
I have a couple questions you gave me the idea to a flat door panel and I am thinking of using you method since is practically all I need to do is use this same format. What kind of gel coat is that.
Good job man. Thanks
Hello, Buddy!
Thanks for the compliment ~
I will make more interesting and informative videos, so stay tuned to my channel.
Thank you for watching.
Nice job
Sure that theirs things for everybody’s tastes, but I find the look of natural carbon fibres with gloss absolutely WOW, but the cost is so high, you really have to be a maniacs of it, my sportbike is full of it, I even got some parts in my s.u.v., might say I’m an addict 😂😂😂😍👍
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
nice table
Good job !
I always wondered, how do you learn to manipulate carbon fiber and where do you buy your stuff lol
Wow, beautiful work!
What a cool channel, keep it up👍🏼
Hello, Buddy!
Thank you for watching.
I will make fun and informative videos.
Please lookfoward to next video.
Thank you.
Great job!!! 🙌🏽
You are the best ♠️
Hello, Buddy!
Thank you so much.
Please look forward to next video.
I will make fun and informative video.
Thanks for watching.
Very nice
이정도면 변기 카바도 카본으로 만드실분이라는걸 잘 알갰습니다
ㅎㅎㅎ
Geile Arbeit👍👍👍👍👌👌👌👌👌👌
Fantastic Channel!
Sir can u list these items
Also plz can u share the epoxy mixing
Hello, Buddy!
I purchased materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Epoxy gelcoat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-gelcoat/epoxy-tooling-gel-coat.html
Lamating epoxy resin www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/EL2-epoxy-laminating-resin.html
top coat www.easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/epoxy-coating-resin.html
carbon fiber cloth www.easycomposites.co.uk/#!/fabric-and-reinforcement/carbon-fibre-reinforcement/woven-carbon-cloth-under-400gsm/22-twill-240gsm-3k-1-25m.html
Regarding those 152mm abrasive discs you used with the deWalt sander, which brand do you use? I recently switched over to Kovax which have better value for money than Norton.
Hello, Buddy!
The sandpaper (for dewalt) I use is from Korea.
It's a brand called HANKO, but I don't have any exact information about it.
Hand sanding uses SIA.
SIA sandpaper is very good.
@@ECOLAPStudio Hey tjanks for the speedy reply! Yea well if HANKO is Korean I'm pretty sure its quality stuff! I'm a big fan of Korean manufacturing quality standards 😊🖒
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
what kind of resin do you use?
Hello, Buddy!
I am using epoxy resin.
In this video, laminating epoxy resin and topcoat epoxy resin are used.
I hope you helpful.
U been very useful amazing video you got my respect 🙌🙌🙌
Reason for failure, no peel ply or breather absorber and not enough squeeze to even out the resin.
Best Kiteboarding Official why in the world would you need any of that stuff just to do an overlay? He started out ok until he put that bag over it to try and compress it, definitely didn’t need the bag.
What kind of pump are you using? I want one!!
Hello, Buddy!
I used vacuum bags and pump for clothing and food.
It will be available to you too.
@@ECOLAPStudio oh.. I thought your vacuum pump is for carbon specific only. Haha. Nice hack. Thank you for sharing!!
Dick pump
미국에서 잘보고 있어요. 배우고 싶네요... 코로나때문에 집에만 있으니 죽겠습니다
Are you guys using different resins fir every steps
Hello, Buddy!
I am using several epoxy resins.
Epoxy gel coat, laminating epoxy resin, and top coat epoxy resin were used.
The epoxy resin used varies depending on the composition.
Was it different type of epoxy when apply for top coat? Or same thing as normal one?
탑코트에 사용된 에폭시 레진은 마무리용 탑코트 에폭시 레진으로 고광택 클리어 에폭시 레진입니다. ^^
wow nice.
is it not possible to make a table solid carbon no wood at all??
Why do you always apply epoxy gel coat under the first layer of carbon fiber? As you are not doing a mold, why not just using epoxy resin?
Thank you
The black hides the mdf underneath. It also just the process for skinning
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
what was the second polishing attachment he put after the first one? The red color one.
Can i do this at home? Or do i need workshop?
Hello, Buddy!
I am making carbon fiber at home.
However, it is very difficult to make carbon fiber at home.
If you try, pay attention to ventilation.
Also, be sure to wear a mask.
ECO-LAP Studio thank you mate! I will definetly try this. Good luck with your channel i subscribed!! :)
amazing carbon fiber 😍
Thank you so much~
That looks great, thanks for sharing
Hallo, schaut echt top aus! 👍🏻 Wäre super wenn Du die verwendeten Materialen beschreiben und oder verlinken könntest 😉
Hello, Buddy!
Thank you for watching.
And..
I'm buying carbon fiber and epoxy resin from online shop in Korea.
However, Korean online shops do not ship overseas.
So I introduce you UK online shop.
Maybe you can find what you want.
I hope you helpful.
www.easycomposites.co.uk/#!/
Well, technically it's carbon skinning but still super cool.
I dunno what im doing here
Why did you add heat to the top coat on this one but not the steering wheel or shifter?
Superrr !!!
Hello, Buddy!
Thank you!!!! so!! much!!
You can use paint rollers for epoxy
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
0:20 so you usually sit on the roof of your car to eat some snacks?
Hello, Buddy!
Sometimes the wing can be used as a coffee table. ^^
@@ECOLAPStudio S2000?
@@kmffvii looks like an M3
Hello, what brand are the materials used?
Hello, Buddy!
I'm buying carbon fiber and epoxy resin from online shop in South Korea.
However, Korean online shops do not ship overseas.
So I introduce you UK online shop.
Maybe you can find what you want.
I hope you helpful.
www.easycomposites.co.uk
Why didn't he removed the plywood?
MDF
If you were to make a 3/4" thick table of carbon fiber it would cost about 2000 usd... the skin is very thin, and decorative, not able to hold any additional weight... probably 250gm/m2 carbon and likely cost him about a hundred dollars us to make a a skin...
but what are You doing this? only for visual aspect?
What Carbon fibre wrap did you use? Got a link
what did you use as a table? Acrylic? or wood?
Change the color of your car with carbon without dyeing
ruclips.net/video/aL5hFhQ6Dqk/видео.html
진짜 금손이 여기있으셨네요!
감사합니다!
아직 혼자 이것저것 시도해보고 공부하고 있습니다.
아직 많이 부족하지만 지켜봐주세요!
시청해주셔서 감사합니다.
Best if you explain the procedure on screen as display what you doing with material details please
Well I was expecting a carbon fiber table, not fibreboard wrapped with carbon fibre sheet....
that's because you don't understand how composite objects are made or at least you didn't
@@drumbum7999 I'm with embino, and I do have an idea of how composite objects are made. At first I thought he was running a very thin piece as a core, but this is more of a laminate that is true carbon fiber. Or that he was using that piece to create a mold. I'm not disappointed, it is a nice looking table, but you get all of the cool looks of carbon fiber but without the lightweight benefits of carbon fiber. Granted he didn't have to lay multiple layers, add in core material, create support structures and bracing, so from a time and cost perspective, it was the best route.
Do you know if I can do this over laminate table top ??
Can we do this without the vacuum seal bag?
ウチのボロテーブルにもカーボン貼ってみようかな〜
うまくできるかは分かりませんけど
amazing table !!!
Where do you buy the carbon fiber paper ?
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
www.easycomposites.co.uk/
This was a carbon-fiber wrapped table; not really a carbon fiber table.
Didn't know I was watching a asmr video lol
I actually fall asleep while watching it
😂😂📺😴
😂🤣😂🤣