Because I’m who I am, I have to experiment with everything. I found you can totally seal print then cuts with boot waterproofing spray too 🤨 it kind of absorbs into it and worked great. Why? I don’t know it was under my sink 🤷🏼♀️ 😂
Great video! Thank you for the "waterproofing" tip! I saw a RUclips video last week where they used printable vinyl and it ran everywhere. This would've been helpful to that artist!
I LOVE your hair!!! You are absolutely beautiful, inside and out!!! ❣❣❣ Great video tutorial!! I'm going to get some print then cut paper today to try this. Thank you very much for the great video!! ❣💐❣💐❣💐❣💐
Becca, you be a beautiful person & thank you for this wonderful video. O, I forgot to ask, could you have cut off & saved the unprinted portion of the vinyl? I like to save reusable material scraps for future projects.
Can I use printable sticker paper for car decals with uv laminate. I bought a lot thinking it was for car decals for my sons not for sale. So is it possible at all to use for car decals instead of printable vinyl.
Hi! Can I use adhesive transparent foil over the stickers instead of any spray? I’ve seen it somewhere people doing it so, I’m not sure what’s better, a total beginner here😅 Thanks a lot!
I have heard from several people including this nice lady, that the gloss tends to not allow the Circuit machine to read the lines very well and you might run into problems with it not cutting. Definitely go with the satin
Hello, I have some questions not really related to the video. I have a circut explore air that does not have a "Felt" option. It only has " wool/blend felt" and " wool bonded felt". Which one do I use with the circut felt? what pressure do I use ? What mat and blade should I use? Plz & TY :)
I literally have to let my ink dry for 24 hours before I am able to water proof my labels. I use Printable Glossy Vinyl, do you wait for your ink to dry? Thanks
I am a brand new Cricut owner and have a couple of questions if anyone more experienced can help. 1.) Can the registration marks be changed to work for the 8.5x11 size sticker paper/printable vinyl? I feel like it's a huge waste to be restricted to a 6.75x9.75 space. 2.) Is there a fix for getting the thicker sticker paper offered by Cricut, through an inkjet printer? I even chose thick matte on my printer but it kept jamming on me. 3.) Does Cricut make a glossy sticker paper? I am an artist and the primary reason I wanted a Cricut machine is to be able to print my stickers. (I'd prefer a thicker gloss vinyl but all I have currently is printable vinyl sheets, and printable sticker paper.)
I stopped watching Makers Gonna Learn because I couldn't stand the hosts or the format. If this video is indicative of a new direction e.g. more professional and concise, and way less unnecessary talking, then I may start watching again. Great job!
Sorry you feel that way, but there's no need to be rude :) We are always growing and changing as we gain new team members, better video equipment, and more knowledge. The great majority of our viewers have loved watching us grow and change over the years, but we know we can't please everyone. Feel free to "bare with us" through our growth, or not :)
@@MakersGonnaLearn I love your usual laid-back format! It didn't feel rehearsed and still like other channels. Becca's was beautiful and I loved today's as well. I did miss the back and forth talking that usually happens today. Maybe both formats work. I would watch yall either way. I am also glad to be a member of your fun, learning group. :c)
There is no need for you to be so rude nobody forces you to watch any videos . Don’t knock people’s confidence keep your negative opinions to yourself in fire
@DI Carter Wow! You know so much you should start your own channel... you can even pick the perfect host, perfect format and everything. You're definitely going places!
How would you like us to teach properly with a mask on? :) Please take all of the precautions you'd like!! We always recommend spraying in a well-ventilated area.
Love the video!! So different from the craft rooms.
So glad you loved it! Thank you for watching and commenting!
Regarding the cricut not reading when paper is glossy: add some matte tape on top of the black marks
Yes this is a tip, as well as using satin and not glossy finish spray :)
Because I’m who I am, I have to experiment with everything. I found you can totally seal print then cuts with boot waterproofing spray too 🤨 it kind of absorbs into it and worked great. Why? I don’t know it was under my sink 🤷🏼♀️ 😂
LOL Elya you are crazy!! We'r so glad this worked for you, though!!
Looking very pretty today Miss Becca!!! Thanks for the video.
Thank you so much!😊💕
Great video Becca! It is great to see you and ofcourse today's project!...
So glad you enjoyed it!
Great video! Thank you for the "waterproofing" tip! I saw a RUclips video last week where they used printable vinyl and it ran everywhere. This would've been helpful to that artist!
You're so welcome!! Thank you for watching and commenting!
I LOVE your hair!!! You are absolutely beautiful, inside and out!!! ❣❣❣
Great video tutorial!! I'm going to get some print then cut paper today to try this. Thank you very much for the great video!!
❣💐❣💐❣💐❣💐
Aww!!!! You are TOO sweet!!! Thank you so very much!!
Great video thanks so much!
So glad you liked it! Thank you for watching!
Great tip! Thank you so much for sharing! Stay safe, healthy and positive! GOD bless you and your family! 🙏❤🇺🇸😊
You're so welcome! You're so sweet, Deane. God bless you also!
Thank you! ❤
OMG, I love love your hair
Thank you!
Becca, you be a beautiful person & thank you for this wonderful video. O, I forgot to ask, could you have cut off & saved the unprinted portion of the vinyl? I like to save reusable material scraps for future projects.
Yes you can cut the rest off and save it, not sure how it would work printing small piece in a printer but you can cut the extra off and save it.
You're SO SWEET! Yes ma'am you can!
Thank you for replying!
What I do is tape my leftovers to a piece of printer paper but make sure you know where to place it to catch the image.
Would the spray you used be recommended for magnets to be placed on my classroom door outside?
The poly is good on canvases to i made a canvase with my circut an sprayed that on as a sealant an it worked great
Oh that's great! We love using this sealer for all kinds of things!
Can I use printable sticker paper for car decals with uv laminate. I bought a lot thinking it was for car decals for my sons not for sale. So is it possible at all to use for car decals instead of printable vinyl.
What cricut cut setting did you use?
cut your vinyl first then spray, the polyurethane residue will gum up your blade and dull it.
What is a good glue to use to glue wax paper to card stock?
Here you go: amzn.to/3sgg9CX
I am excited to try this! How would you package these if you want to sell them? Thanks for the awesome video and clear directions!
Do you have to use a laser printer? As opposed to a photo printer?
Hi! Can I use adhesive transparent foil over the stickers instead of any spray? I’ve seen it somewhere people doing it so, I’m not sure what’s better, a total beginner here😅 Thanks a lot!
Would this work for sticker sheets?
Approximately how many sheets can one can do
Does it make a differernce if you use Clear Satin or Clear Gloss? I bought the silver can.
I have heard from several people including this nice lady, that the gloss tends to not allow the Circuit machine to read the lines very well and you might run into problems with it not cutting. Definitely go with the satin
I used laminate on my tumbler stickers, I hope that's ok
What printer do you recommend? I really want to try stickers. I have a Canon TS3122. It won't load the vinyl.
Any Inkjet printer works great with Cricut Print Then Cut! Try using the top tray :) Here's the one we have. CanonTS8320 Printer: amzn.to/3tougrq
Hello, I have some questions not really related to the video. I have a circut explore air that does not have a "Felt" option. It only has " wool/blend felt" and " wool bonded felt". Which one do I use with the circut felt? what pressure do I use ? What mat and blade should I use? Plz & TY :)
You would use the "paper thin felt" setting, and feel free to place it on "more pressure" :) Regular Fine Point blade and the pink mat if you have it!
Thank you so much cause I was struggling. Almost was ready to throw in the towel🙃
would this work with any sticker or is it only ones that are like that????
I literally have to let my ink dry for 24 hours before I am able to water proof my labels. I use Printable Glossy Vinyl, do you wait for your ink to dry? Thanks
Cricut vinyl will not go through my printer. Printer just eats it up. Is the other opposition more printer friendly?
Some printers have trouble with products like that! We've found that a printer with a rear tray works best! :)
I am a brand new Cricut owner and have a couple of questions if anyone more experienced can help. 1.) Can the registration marks be changed to work for the 8.5x11 size sticker paper/printable vinyl? I feel like it's a huge waste to be restricted to a 6.75x9.75 space. 2.) Is there a fix for getting the thicker sticker paper offered by Cricut, through an inkjet printer? I even chose thick matte on my printer but it kept jamming on me. 3.) Does Cricut make a glossy sticker paper? I am an artist and the primary reason I wanted a Cricut machine is to be able to print my stickers. (I'd prefer a thicker gloss vinyl but all I have currently is printable vinyl sheets, and printable sticker paper.)
Use some oracle printable waterproof vinyl with uv laminate, the spray will gunk up the machine, great way to ruin your machine.
Can I use that spray for printable vinyl car decals? I have a can but it says that is for indoor use only.
I would use pastidip as it also has a uv inhibitor
I get it right, it still smears. Wasting my product.
Sorry you're having some issues!
for the love of all that is holy do that outside, dont spray polyurethane in your kitchen jfc
Spray is getting all over Cricut machine and printer. Never mind the aforementioned "disclaimer".
I stopped watching Makers Gonna Learn because I couldn't stand the hosts or the format. If this video is indicative of a new direction e.g. more professional and concise, and way less unnecessary talking, then I may start watching again. Great job!
Sorry you feel that way, but there's no need to be rude :) We are always growing and changing as we gain new team members, better video equipment, and more knowledge. The great majority of our viewers have loved watching us grow and change over the years, but we know we can't please everyone. Feel free to "bare with us" through our growth, or not :)
@@MakersGonnaLearn I love your usual laid-back format! It didn't feel rehearsed and still like other channels. Becca's was beautiful and I loved today's as well. I did miss the back and forth talking that usually happens today. Maybe both formats work. I would watch yall either way. I am also glad to be a member of your fun, learning group. :c)
There is no need for you to be so rude nobody forces you to watch any videos . Don’t knock people’s confidence keep your negative opinions to yourself in fire
This was for you Di carter
I’m with you. I always skipped right over because of some of the hosts. This is a really good one and very informative and to the point.
I cannot believe you're not wearing a mask when spraying. Big no-no
@DI Carter Wow! You know so much you should start your own channel... you can even pick the perfect host, perfect format and everything. You're definitely going places!
How would you like us to teach properly with a mask on? :) Please take all of the precautions you'd like!! We always recommend spraying in a well-ventilated area.
They stated all of the precautions to take so they were very responsible.