Halo LED Projector Headlights Wiring Installation - Spec-D Tuning
HTML-код
- Опубликовано: 25 ноя 2014
- Spec-D Headlights at CARiD.com
www.carid.com/spec-d/
Lean how to install Halo LED Projector Headlights Wiring.
Custom Headlights at CARiD.com
www.carid.com/headlights.html
To any one doing these lights . If you want your halos to light up while driving during the day i suggest you hook them up to the day time driving lights (aka side markers). The instructions in this video say to hook them up to your hi/low beams. But if you do that they will only light up during night time driving. I learned this the hard way and had to do them over again.
If the parts and wires were properly labeled and described, it would have helped alot! 1 of the existing bulbs actually inserts into a hole on the new unit. The unit we have for a Honda Accord, came with a small attached unidentified part (glued on with sticky tape) that had a wrapped connector that needed to go "somewhere", with a red and black wire. After inserting the bulb harness into the correct hole, I took out the small bulb on the last remaining thing left, and voila, that little connector inserted into where the old bulb came out. This video left ALOT of important steps out which made installation very confusing for the novice. So now the 1st light towards the inside is extremely dim, then the high and low beams work correctly, the spot where we had to insert the old bulb harness is dim as heck because its a regular old bulb, and the halos work great as well as all the side lights. The wiring of the white and black wires was helpful tho, so your video wasn't' a complete waste, lol. Crimp connectors were not included in the kit, only 4 of the other connectors. Instructions in the box were pretty bad too.
After watching different install vids about 10 times,..it finally starts to make sense ,..kind of simple !!!
As for a 2014 Ram 3500, the lights fit perfect, the video was excellent and the lights work fine. Thanks Spec D. Used heat shrink tube for the helo/led wires.
I ordered some for a 08 silverado, can I hook up the halos and leds other than the headlights? Where they come on with the parklights
Quick question i got the projector headlight but where did you connect the wires in the low beam or the drl thats usually in th bottom with the small bulb accord 98
Bought some headlights for my G35 without knowing I would need to wire in the halos and now I'm scared I'm gonna mess them up. Also was it supposed to come with those loose wires like in the video or not? Bcus I didn't get any
at the very end of your video , you did not connect the factory harness to your headlight assembly ?...is it not needed ?...... does the extra wiring you did eliminate the need to connect it ?
Wow I loved the video brother keep uploading more videos greetings I love it 👍👍👍👍👍
I wanted to asked you does the halo supposed to turned on when you have the nite lights or the running day light?
08 dodge ram, do i plug the connector to something? Or just let it hang? Is the splice just for halos?
Oh man. I was looking at these and was excited...until I saw the wiring. I was hoping you just took out the old and plugged in the new lol.
do the quick connectors come with the set? if not what gauge quick connectors do I need?
Hi there I just want to know how to adjust the lights please can you tell me
I connected some halo on my car did all the wiring they all work turn on BUT they are not bright enough. When i got them i check if they work, they did and shine really bright. But when i connected all 3 together they dimmed. What can i do? Btw i connected direct to the oem wire harness. So the halos turn on with the regular projectors.
Instructions unclear. Blew my motor
I have three sets of wires ones got a white and black and a black the other two have a set of white and black what do I do ?
I received my dual halo LED projectors and installed them today as per this video, my halo rings only light with my headlights not with my running lights. I see in one of your responses that you state they must me connected to running light power. That would have been extremely helpful for the person in this video to state that. Also, my Low beams go out when I go click on my High beams, is that the proper function of these lights? I have already emailed customer support and have not received a response.
#CARiD
Have the same set up but my bulbs went out, i replaced now only my high beams work and not my lows, what can it be??? i checked all my fuses there all good