In general, the side with the label on vents is where the air will come out, don´t you have fronts and rear on oppossite way? fronts might be pulling air inside and rear pushing out...
@@gaminggeektech07 did you put 2 up top? If you put 2, chances are the one closer to the front panel would be sucking air before the air reaches the CPU cooler. Just put one fan on top of the CPU cooler.
i think going with gskill ram might be the route as they don't have much height, thus allowing some space for D15, but quite confident with an air cooler for 13900K..., Lancool 216 is such a good case, how's the airflow with the 2 bottom fans and with d15? Is it positive pressure or negative?
you will not have any problems with D15, with few modifications in bio's like small undervolt plus intels power limit's,it's better to not use the 2 bottom fan's, without them I have -2 degrees better temps.
@@gaminggeektech07 I see, so they are restricting air flow and also affecting Gpu as it's basically sort of pushing the hot air coming out of gpu right back in...
@@gaminggeektech07I want to buy the Same case for Gigabyte 4080Super Gaming Oc with ryzen 7800x3d and Noctua NH-D15. How Are the temps and Noise Level while Gaming ?
how you will remove the GPU now, is the latch accessible, or is this an Asus motherboard where you have a separate button levered to release the latch.
is that arctic p12 above psu? so that space only fit max 2 x 120mm fans, not 2 x 140mm? and how about the space above, after you put noctua can you add 2 x arctic p14? anyway.. awesome setup, sir
yes my friend, you can use 2 P120 Artic or 2 P14, the same results you will have,I don't see any difference or benefits cause I used at beginning 2 P140 PST just for testing and there no benefits with bigger fan's .
@@gaminggeektech07 A few more questions please, is the CPU using a Contact Frame? Did you undervolt the CPU? What is the ambient temperature where you live? I'm thinking about doing a similar setup, but I'm worried about the temperature, it's currently 30C here at home, for example.
@@ViniCLplay same ambient temperatures i have my friend,you can put a negative offset -0,040 but you will not see any difference, probably to play with power limits values of your mobo or use a liquid cooler like Artic my friend
@@gaminggeektech07 Got it, thank you very much for your help! 🙏 I suggest taking a look at a CPU Contact Frame, it might help lower temperatures further.
@@ViniCLplay it's not the contact frame the problem my friend, the cooler can't handle it,the Noctua mounting kit 1700 don't work proper with this cooler,the same thing is happening with the new slim mounting 1700 lga kit of Artic Liquid Freezer ii,the older fat mounting kit has 5 degrees better temps, probably better mounting pressure,I tested it multiple times.
In general, the side with the label on vents is where the air will come out, don´t you have fronts and rear on oppossite way? fronts might be pulling air inside and rear pushing out...
@@eduki like that are the fans my friend, the 2 front push air inside and the rear pulls out.
Nice! Did you try out any exhaust fans on top to see if it made any difference?
I tried and the temp's of CPU was up by 2 degrees.
@@gaminggeektech07 did you put 2 up top? If you put 2, chances are the one closer to the front panel would be sucking air before the air reaches the CPU cooler. Just put one fan on top of the CPU cooler.
i think going with gskill ram might be the route as they don't have much height, thus allowing some space for D15, but quite confident with an air cooler for 13900K..., Lancool 216 is such a good case, how's the airflow with the 2 bottom fans and with d15? Is it positive pressure or negative?
you will not have any problems with D15, with few modifications in bio's like small undervolt plus intels power limit's,it's better to not use the 2 bottom fan's, without them I have -2 degrees better temps.
@@gaminggeektech07 I see, so they are restricting air flow and also affecting Gpu as it's basically sort of pushing the hot air coming out of gpu right back in...
Yeap the best orientation is with the 2 front fan's and one in the back
that is a lot of fans to keep the GPU cool
how did u add the second nh d15 fan. My build the one fan sticks out bc of the ram. how do you adjust your ram
you can adjust the height front fan near the ram .
@@gaminggeektech07I want to buy the Same case for Gigabyte 4080Super Gaming Oc with ryzen 7800x3d and Noctua NH-D15. How Are the temps and Noise Level while Gaming ?
is the glass door colse?
without
how you will remove the GPU now, is the latch accessible, or is this an Asus motherboard where you have a separate button levered to release the latch.
It's seems difficult but it isn't, you can use a pen or screw driver to press the release button mechanism my friend.
How did you install the Arctic P14 at the bottom? I have troubles installing mine as the long screws were not long enough.
I used different screws from spare parts, unfortunately i don't remember which type of screws caused I'm not using this case for about 6 months
is that arctic p12 above psu? so that space only fit max 2 x 120mm fans, not 2 x 140mm? and how about the space above, after you put noctua can you add 2 x arctic p14? anyway.. awesome setup, sir
yes my friend, you can use 2 P120 Artic or 2 P14, the same results you will have,I don't see any difference or benefits cause I used at beginning 2 P140 PST just for testing and there no benefits with bigger fan's .
What is the CPU? And is the temperatures of the CPU with D15? Please
13900K and the temp's was 93c on core and 96c on packet with cinebench R23 3 runs.
@@gaminggeektech07 A few more questions please, is the CPU using a Contact Frame? Did you undervolt the CPU? What is the ambient temperature where you live? I'm thinking about doing a similar setup, but I'm worried about the temperature, it's currently 30C here at home, for example.
@@ViniCLplay same ambient temperatures i have my friend,you can put a negative offset -0,040 but you will not see any difference, probably to play with power limits values of your mobo or use a liquid cooler like Artic my friend
@@gaminggeektech07 Got it, thank you very much for your help! 🙏
I suggest taking a look at a CPU Contact Frame, it might help lower temperatures further.
@@ViniCLplay it's not the contact frame the problem my friend, the cooler can't handle it,the Noctua mounting kit 1700 don't work proper with this cooler,the same thing is happening with the new slim mounting 1700 lga kit of Artic Liquid Freezer ii,the older fat mounting kit has 5 degrees better temps, probably better mounting pressure,I tested it multiple times.