Xbox 360 DVD Drive Repair (Not opening or reading disks)
HTML-код
- Опубликовано: 27 фев 2022
- In this video, we look at what it takes to swap the drive in an original Xbox 360. It's not a hard procedure, but there are some "Gotcha's" involved.
Thank you for watching our videos! Please like and subscribe!
Some of the parts used in our videos come from Hand Held Legends. please visit link provided as it helps support the channel and you will get a 10% off coupon on your next purchase as a new customer! ruclips.net/user/redirect?even...
If you already buy from Handheld Legends, use this link provided below to help support the channel. (the link provides credit to the channel's future parts purchase)
ruclips.net/user/redirect?even...
STEM Projects for your kids are a great way to learn: www.kiwico.com/Refer?i=TonyF49
We are now an Amazon Affiliate. Please use the links below to help support the channel. (Thanks)
Hakko FX-951 soldering station: amzn.to/2RSYkgZ
Some inexpensive hot air stations work great. I use something similar to this: amzn.to/3fCLoVp
or this: amzn.to/2TxnTEG
Bench powersupply: amzn.to/34DUNpe
Kessler Solder: amzn.to/3fFopcf
Low Temp Solder: amzn.to/3grhB2x
Desoldering braid: amzn.to/3gj8hgZ
A smaller spool of braid: amzn.to/2Sp0UeS
Soldering Flux: amzn.to/34PYQ29
Microphone stand used on the Microscope: amzn.to/2RZhi5i
Microscope: amzn.to/2RaHd9N
Jewelers Loupe: amzn.to/3uEnM71
USB-C Power Meter: amzn.to/3g2Po0s
Alcohol Pump bottle: amzn.to/3etZoQj
For your morning Caffeine Jolt: amzn.to/3rbbLWp
Here are links to some of the equipment used in making our videos.
Main Camera, Cannon M50: amzn.to/3uIuRn7
Overhead GoPro Camera: amzn.to/34C0Pa1
Davinci software (Dongle) and Speed Editor: amzn.to/3fDEpeI
Davinci software (key) and Speed Editor: amzn.to/3vOSI5N
The best cheap microphone you can get !! amzn.to/34yCjXo
Light Ring: amzn.to/3fHdDCw
HDMI Capture Card: amzn.to/354VSa3
Some of our camera and video editing gear came from Adorama. You can get a free 1000 points in their reward system by using the link below, and it helps support this channel.
bit.ly/2NiE9qc
Please check us out on social media!
Twitter: / pghgamefix
Instagram: /
Facebook: Pgh Game Fix
The music used in the intro:
Music: Eric Skiff - Chibi Ninja - Resistor Anthems - Available at EricSkiff.com/music 
Хобби
Thanks for making this video . I recently acquired 2 faulty 360’s . One that was working well but had a broken disc drive and another that had red rings but a good disc drive . Bingo bango , I swapped the good disc drive to the non red ring unit and now i have a complete 360 again 👍🏼, thank you sir , you are a retro gamers savior
I'm glad the vid helped. Thanks for watching.
Hi,
Will it work between a Philips Lite-on and BenQ drives please?
Or both drives should be exactly the same?
I want to be sure before doing that manipulation.
Thank you very much 🙏
Very straightforward tutorial, clean and informative. Spoofing DVD drives - so 2007 😂
Perfect! This was exactly what I was looking for, just purchased 2 new drives, completely forgetting about the firmware side of things, thought FFS! You've turned a 'FFS' into a 'BooTeaFull', a really simple solution now, really appreciate this, great work!! Liked n subbed
Great vid. I followed these steps and it worked like a charm! Thanks!
Glad the vid helped.
I did the same repair in my personal 360. Nice video. Great job as usual.
Thanks for the complement... and thanks for watching !!
Hi,
Will it work between a Philips Lite-on and BenQ drives please?
Or both drives should be exactly the same?
I want to be sure before doing that manipulation.
Thank you very much 🙏
Enjoyed your vid! I love working on xbox 360!
Thanks. I appreciate the views.
the silver screws are a T10 torque bit, and the black ones are a T9 torque bit (for anyone who was wondering)
Hey is the disc drive you got the same for other ones like benz drive? Or no?
I learned a lot from the video but I still didn't see how to get the tray to open I'm sitting here in my tray still not opening and I'm not sure why also I'd like to know where you said you can order the boards I'd like to order a new board since I got it tore down
if I changed the drive to another one, which I took from a donor, it did not work for me. I reinstalled the old drive that was there before, but it also does not read discs, is this Microsoft protection? How to return the old drive?
Quite tough at beginning 😫😞😂
But in the end quite sample 🎉
Will this fix work for non American Xbox 360s? Mine is Japanese, I want to know if I swap the drive with another one will it still work for my NTSCJ games?
Is it the same process for the Xbox 360 slim?
Hello. Thanks so much for the vid. I just need to know, where do you get your spare parts. My Xbox doesn't read my discs anymore. I tried replacing the laser, but it still didn't work. So I'll replace the board.
Ifixit is a really good resource for parts and guides as far as I can tell
Hi great video. Can you please let me know what the fluid is that you put on the solder ??
Before..... it's flux. After... it's alcohol to clean the flux
I watched your video and one by Capr1corn and the boards on the DVD drive are very different. How do I know which replacement drive I need so that I have compatible boards to swap. I am pretty sure that I have the Jasper version of the console.
The regular/fat, and the slim should have the same style drive. The "E" had a different version. BUT, to be safe, open your dive, and see what version you have.
I have a xbox 360. It was basically new. I was using it one morning and suddenly the power button started flashing. I can't open the drive tray. I can only turn it off and turn on by unplugging and plugging it back in. When I push power button, it goes to flashing green light. Nothing works. What could be the problem? No flashing red of death yet. Thanks
I did my first red ring fix last week!
I generally don't mess with the RROD because it is normally short lived.
@@PghGameFix yeah i’m guessing it will revert to it’s RROD state! But still just happy was able to bring it back from the dead! Also problem with it is that the dvd drive is missing a gear. And it’s a Toshiba/Samsung TS-H943 drive and the other drives’ gear don’t fit!
@@onasazistill alive?
@@hypercalmeqc7863 still!
@@onasaziis it still working?
problem is to get a good quality laser. cause i bought several ones from aliexpress, but they are cheap quality and doens´t work. had only 2 out of 5 which were working.
Where do you get your xbox 360 dvd drives? I plan on doing this repair on my grandmas xbox which has a pretty broken dvd drive. Awesome video btw, it'll definitley help in my repair.
You can normally get a drive from Amazon. There are a few types.... open your 360 before ordering a new drive
How do I know which type to get? If it helps I know this Xbox is a Fat with a Falcon motherboard.
Sorry just for clarification, when I said this xbox I meant the xbox Im working on.
i want to say nice video and thanks for posting. i'm new on your channel so i have a question i have a 360 like that but the drive doesn't read the disk i fixed the door so opens nice but the disk spins up then stops. won't read is it possible the control board be bad? and if so how do you just swap out the dvd drive?
most likely the lase went bad. swap the laser out and it should be fine. the drive control board is locked to the system.
@@PghGameFix i saw that somewhere and was hoping it's not that board but i will see as i ordered a used drive on amazon same drive model.
How do you open the black one
Can I send mine to you to get fixed?
Safety glasses +1. Ridgid cordless drill +2. Subscribed. Edit: Safety glasses = Reading glasses? Keep up the good work!
What was the reason/advantage you replaced the entire drive instead of just the laser?
Because the complete drives are available for about the same price.
@@PghGameFix ahh… I wonder if that used to be the case but not anymore because the drives were over double when I was looking yesterday. $8 for the laser and $25 for the cheapest drive I could find… :/
Hi,
Will it work between a Philips Lite-on and BenQ drives please?
Or both drives should be exactly the same?
I want to be sure before doing that manipulation.
Thank you very much 🙏
Wondering this too, did you find out?
@@BreakfastSnack finally i gave up and bought a modded xbox 360 slim instead 😅
@@NoyzP360 I was looking to buy one too where I live for $300 but I waited right now tomorrow Tuesday I’ll know for sure if the BenQ VAD063 works for sure
I would recommend before replacing it opening it up and cleaning the laser and belt. I did this on mine and it’s opening and reading discs now
absolutely. but most of these just need a new laser.
This is exactly what mine is doing but don’t know anywhere they would fix it for me
Do you do commission repairs? if so how much for this same problem? my optical drive failed
With a 360, it may not be worth it if you aren't local. The parts prices have gone up, and adding shipping will be more than the value.
@@PghGameFix Alr thank you
👍🏻💯
If you do a Lazer swap.
Do you half to adjust anything?
generally, no.
@@PghGameFix Very good.
Thank you. I've had my XBox for over 10 years. Blew the dust off of it put in Forza 4 and it appears I have the same conditions as your video.
@@NBC_NCO Glad the vid helped.
Pot tweaking is fiddly also! But i did also fix one of my friends Xbox 360 with the pot tweat
Sure... you can add a little gain to a laser that is starting to go bad. I often do that with systems that are harder to get parts for. One thing to keep in mind... in a shop... labor can be more than the part... so to adjust the gain... if that adds 30 min... then the part is cheaper, and a better long term fix.
@@PghGameFix yeah i agree on that perspective! I l’ve been trying to fix things and sometimes time is much more but the satisfaction when it is fixed!
@@onasazi That's how I got into it. It's rewarding to bring them back to life.
@@PghGameFix well you definitely show it in every video you produce and i enjoy watching them. You got good insight into every fix you show us. Keep it up!
I did swap the drive but now it won’t even respond to me when I press the eject button
Sounds like you didn't solder the wires back in the proper spots.
My friend my device Xbo360 When I insert some of the discs to play, it writes unknown to me knowing that I am that disc when I bought it and it was working. After a while I went back and played it. It did not work. It has no scratch or dust. We are completely clean. The door does not open sometimes. How is the solution? Thank you
THe door not opening is a belt replacement. I have a video on that. But it sounds like your laser is going bad, and it's time for a replacement drive.
@@PghGameFix My friend, currently some of the old disks are working and some are not. Do the lens not work?
What do you do if the board is the problem?
THere are ways to flash the bios on the board... but it's not an easy job.
I want cd drive bcz my first one was broken where can I get it
Check Amazon or eBay.
Someone asked already but in all seriousness - how much would you charge to repair one? And would you be willing to?
Contact me on Facebook for shipping details.
So you can't just unplug the entire disk reader and just plug the new one in ?? Serious question...
No. Xbox and MS didn't want to make it easy on us
That would be nice, but no. It won’t read discs if the system detects that the drive is mismatched.
Disc* A disk is a hard drive.
so.... you are saying that a flat round thing is not a "Disk"?? Or that the last word in the abbreviation of "DVD" isn't "Disk"? Yes... the hard "Disk" drive is a disk... but so is the optical "Disk" Drive. But regardless... thanks for watching.