So I wonder, what's the operational cost of this CNC Machine per hour (operator salary, electricity, bits, wear and tear, initial cnc cost, maintenance etc) VS the quantity of products it can make? This demo shows a simple door that can be made with a stationary router and 3 cutters/bits. What's the market for this cnc and why a door as an example project? You'd better shown something, that can't be made with simple tools...
They just pumped out an eight piece door in minutes. I'm just assuming you don't do this for a living. That shit is very difficult with "simple tools". Try doing that clean of a climb cut by hand, with a router. Then you need to dado and rabbit the stiles/rails. I'm assuming they also use haunch and tenons for joinery. Fuck that's extremely challenging to do with a table saw. I love building this shit by hand. But no company will pay my wage for that. CNC/3D printers are the future. If you want to be in trades, learn g-code.
You can charge a flat rate of $150 - $180 an hour for CNC work... so I’m pretty sure you can cover the bits, labor, power, loan etc. I recently cut out all the panels for a $113,000 job in 5 days. We had it wrapped up in a month including install with a a 3 man shop.
For sure, customers get charged 100 an hour for me to program, and then run the shit. Then I think 50 for assembly/sanding/finishing. I don't get paid even close to that, but it's not my company. But chill work, for good pay. More stressful than sanding. But not so boring.
What edge hole cutter did you use? I have a CNC AES Vega Ultra with 3X and I would like to know what kind of drill bit is used for drilling in door corners and window frames.
5:05 next year 4 tool head ..same price...year after 6 tool head ...same price.. why there is no 4 tool head it would work same LOL is there or is it....like i said..next year same price.full machine LOL need update LOL
It's still made out of solid wood, glued up panels. Both interior and exterior doors are made from a variety of materials, the most common being wood that sometimes is in combination with glass. All-wood doors are made from either affordable softwoods or, at the higher-end, more durable and elegant hardwoods. The look of wood doors has always been a favorite-although doors can have a variety of appearances, most are designed to look as though they’re made from wood even if they’re not. But this is how you cut one with a cnc machining center.
@@TheCort1971 by at leats 10 years. just cause it is a cnc machine doesnt make it valueable in production. Look at the set up speed, the workflow. cmon i rather invest in homag an be happy with its automation.
@@antonstafeyev3606 so you got nothing? how bout some examples of how the cnc process is outdated? can you provide that? you said that it takes a lot of human effort to get it started? show me the AI that eliminates that? can you do that?
@@hameddesign70 You are correct, however we ran this demo with the dust hood in the up position so you could see more of the cutting application... This is a 3 axis machine and yes typically it will pick up much more of the dust if this were a production application.
@@Scarlettinc I've been worked with Holzher CNC machine , the software was NC-Hops 7 and the software it self was ridiculous enough to send the device back , i know at least in my country normal cnc routers which working with usual cam softwares are 100 percent better than these useless fabricated machines
That is an impressive machine!
So I wonder, what's the operational cost of this CNC Machine per hour (operator salary, electricity, bits, wear and tear, initial cnc cost, maintenance etc) VS the quantity of products it can make?
This demo shows a simple door that can be made with a stationary router and 3 cutters/bits.
What's the market for this cnc and why a door as an example project? You'd better shown something, that can't be made with simple tools...
They just pumped out an eight piece door in minutes. I'm just assuming you don't do this for a living. That shit is very difficult with "simple tools". Try doing that clean of a climb cut by hand, with a router. Then you need to dado and rabbit the stiles/rails. I'm assuming they also use haunch and tenons for joinery. Fuck that's extremely challenging to do with a table saw. I love building this shit by hand. But no company will pay my wage for that. CNC/3D printers are the future. If you want to be in trades, learn g-code.
You can charge a flat rate of $150 - $180 an hour for CNC work... so I’m pretty sure you can cover the bits, labor, power, loan etc. I recently cut out all the panels for a $113,000 job in 5 days. We had it wrapped up in a month including install with a a 3 man shop.
For sure, customers get charged 100 an hour for me to program, and then run the shit. Then I think 50 for assembly/sanding/finishing. I don't get paid even close to that, but it's not my company. But chill work, for good pay. More stressful than sanding. But not so boring.
@@robmckay875 Learn G code? Lol. Thats not very forward thinking. Knowing G Code will not be necessary
What edge hole cutter did you use? I have a CNC AES Vega Ultra with 3X and I would like to know what kind of drill bit is used for drilling in door corners and window frames.
What sorcery is that vacuum table? incredible
yeah, it really "sucks"...
Здравствуйте, скажите пожалуйста сколько киловат шпиндель на стоянке для производства дверей
That softwood finger jointed radon timber door must have cost about £1k you could buy the same in howdens for about £100
Unfortunately we don't have Howdens, we are located in the US.
What i want to know is what that gadget that routered the edges was.
Would of loved to see it do the tool changes and very cool vacuum table
Someone kindly help me with the machine model. I need to purchase it. Thanks in advance
Now thats a cnc one I work on is old school 🤣
How much is cost of this machine?
They vary in price based on add-ons, but some where between 100K and 200K
How the glass panel would be fitted on that door?
Dear sir machine set price in india 🇮🇳🙏
do you sell machines internationally?
We currently do not.
Why would you make one door at a time? Must be very expensive.
This was just a demo of what is possible doing it this way.
that machine has so many amazing features. i have never seen that 90 degree adapter
Pretty Cool Huh!
I’d like one please
That's awesome. Puts my cnc to shame 😆
5:05 next year 4 tool head ..same price...year after 6 tool head ...same price.. why there is no 4 tool head it would work same LOL is there or is it....like i said..next year same price.full machine LOL need update LOL
not sure I understand, can you explain it a different way? LOL
@@Scarlettinc it has horizontal tool holder with 2 tool.arent there 4tool holders or they are next year updated specs.same price.like iPhone xD
@@jarisipilainen3875 The current machines have a 12 circular tool holder.
@@Scarlettinc omg
There are no thru-tennons so it's not much of a door. It's CERTAINLY NOT MEANT for external use. Nice machine though...
This was just a demo, not manufacturing. Just showing capabilities.
ًhow much the price
Price of what? The machine, the door, tooling? This is a pretty custom setup, so could you please be more specific. Thank you. :)
@@Scarlettinc the maschine,, and the price of final product,,
There are projects on how to do this on the Stodoys website.
can you send the link? We would like to see it!
Thats alot of doors to cover the cost of that tool.
That's the idea, A lot of doors!
@@Scarlettinc you mean he’s not covering the cost of the CNC with one door... outrageous lol.
This time I will use Woodglut plans for this.
not an option
@@Scarlettinc Woodglut plans are awesome!
Ok. I need laser beams too.
Sharks with laser beams!
The edgebanders now use laser beams. Boom!
What happened no reply
I'd rather have a real person make one.
you always have that option!
IMHO: Why you call it solid wood? Looks like it is glued together boards..
It's still made out of solid wood, glued up panels. Both interior and exterior doors are made from a variety of materials, the most common being wood that sometimes is in combination with glass. All-wood doors are made from either affordable softwoods or, at the higher-end, more durable and elegant hardwoods. The look of wood doors has always been a favorite-although doors can have a variety of appearances, most are designed to look as though they’re made from wood even if they’re not. But this is how you cut one with a cnc machining center.
@@Scarlettinc what company do you recommend to buy stock from like this?
@@bryandmckinnon Depends on where you located?
It is so outdated to be honest. takes a lot of human power to start the proccess
lmao.... outdated by what? go on... i wanna hear this.
@@TheCort1971 by at leats 10 years. just cause it is a cnc machine doesnt make it valueable in production. Look at the set up speed, the workflow. cmon i rather invest in homag an be happy with its automation.
@@antonstafeyev3606 so you got nothing? how bout some examples of how the cnc process is outdated? can you provide that? you said that it takes a lot of human effort to get it started? show me the AI that eliminates that? can you do that?
@@TheCort1971 AI ? man u are no where near production then... first consider autoloading... then we will get back to ai.
@@TheCort1971 then u would consider labling your work and automatic offload and storage.
The dust collection is horrible bad. Saw dust everywhere. At least the finished product is okay.
The dust hood was raised in order to show tooling, normally it would be much better.
Woodglut has very good designs and plans.
Reply me??
What was your question?
@@Scarlettinc 4 axis cnc machine for solid woods give me best price in hyderabad India 🇮🇳
@@Scarlettinc ??
@@Dheerseng Sorry we don't ship to India
@@Scarlettinc give me machine manufacturers contact n more information??
science mofos. lol
My adventure with woodworking began with projects from Woodglut.
These cnc router's ideas are not good , because dust is everywhere normal 3axis cnc router is better :)
We also sell Dust Collectors!
@@Scarlettinc You don't get it , in a normal CNC router Hood will collect all the dust , in these CNC routers , dust will flying everywhere
@@hameddesign70 You are correct, however we ran this demo with the dust hood in the up position so you could see more of the cutting application... This is a 3 axis machine and yes typically it will pick up much more of the dust if this were a production application.
@@Scarlettinc I've been worked with Holzher CNC machine , the software was NC-Hops 7 and the software it self was ridiculous enough to send the device back , i know at least in my country normal cnc routers which working with usual cam softwares are 100 percent better than these useless fabricated machines
@@Scarlettinc Even this machine is better ruclips.net/video/jjdXpp77MdU/видео.html