I'm used to larger, corded routers ruclips.net/user/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
Love this book! ruclips.net/user/postUgkxpCNxqmAkyjN6NPx1fyB7QiEFWyO5mUWL it is simply one-of-a-kind! I really love it, because karah explained all tools required to have the job done, not mentioning the fabulous diy pallets ideas. I'm pretty sure this will be a fresh start in my new endeavour. Amazon was great, they delivered on time. Thank you!
Mistake #8: Cutting your hair with a CNC router So, this is actually a great and very informative video! Everyone having fun with my comment should at least vote a thumb up for the video, pls.
I have been running a machine commercially for 2 years now and still feel like I have no idea what to charge, some jobs go so easy and others a very difficult! I have learned that even though the machine is "doing all the work", learning how to use it properly and efficiently is also a huge undertaking. Thanks for the tips, probably a little late for me but hopefully others are smart enough to start here!
Excellent work. I'm retired and ordered a 4x8 CNC kit. I know it's an ambitious decision to build since I have zero CNC experience but, I figured what better way to learn my machine. I'm hoping that it may help diagnose machine issues that may arise later. This video was very informative and well presented . Direct, to the point, and no annoying music. Keep 'em coming.
Im ordering my cnc in the next week. And im glad ive been a cnc machinist for almost 20 years and a lot of what you said translates from machining steel to working with wood. Good advice. Cant wait to start making stuff
After my first year with my CNC I found myself in every mistale you mentioned. And I just had to go through it, like you said. Very helpful Video, thank you!
Hello!! Great Video and you nailed it in regards to accepting mistakes, and learning, then moving forward. I have been in CNC for 25+ years, and as a machinist I understand speeds and feeds, the hardest part for me is getting used to working with wood, (0.005" tolerance doesn't exist in woodworking! and thank God for Wood Filler ) I have built a hobby machine and am making signs. and such for friends and family. My hardest thing is putting a price on the fun side of it, which is the creating. Cutting is fine, but taking an photo and carving it is the fun challenge for me, and also the fun. I look online to get comparisons from others so I have been using that as a price gauge. So far I know have been charging less as I am very gratified to see peoples reaction, but as retirement is getting closer, I would like to figure out what are realistic charges I should be making. Thanks again and I will be watching your channel.
Nice detailed video. I've watched a lot of CNC videos, as I hope to eventually add one to my shop. This is the first one that covered these types of issues. I'd be interested in seeing your CNC machines and talk about what you like and don't like about each.
I've been a contractor in the painting industry for 40 years still doing the work only because I can't teach anyone what I've learned and tweeked sometimes I don't know how I even do it if you love what you do it's not work I love to keep learning the mind is a beautiful thing
Extremely well done without too much unexplained jargon. The cost calculations alone are worth watching this vid. multiple times especially since machine use time vs machine investment, Include dedicated work space, bits, materials for learning, final product material storage for material and possibly sound reduction in the work room. Then how does a retired non machinist price his/her time?
Broke my bit today. What can be great video? About bits. Its life time, different materials? Low end, high end, sime special ones? Thank you for your effort
I must also agree very well done thank you…… I also have no experience, but I’ve always wanted to learn CAD and Cam So much that my kid got an opportunity for an apprenticeship where his license through the state now and has been machining for 15 years so I do have a great support system … but your video was awesome so thank you for the information
Excellent video for beginner in wood CNC milling. I make all 7 mistakes from video when beginning hobby CNC mill woodworking. I learn it personaly at hard way.
Considering this. I want to say thanks to people who design, test and list every bolts nuts so beginners can start it out. Learning curve is painful, time and money costly
That’s crazy, so they took away the IQ it seems and only have the Pro edition which has the Automatic tools changer, just the IQ should only be like $7,000, I personally would not start with a small desktop CNC like that with an ATC it would not save you enough time on your toolpaths. That IQ Pro is the upgraded version of mine. I don’t know why they took down the cheaper model, makes no sense. I would not of been able to afford that 15K CNC when I was starting out.
what are your thoughts on the avid cnc line? I'm currently debating between the laguna IQ 2x4 and the avid PRO6060 5' x 5? This is my first cnc and I'm looking to grow it into a full time business but would like to spend between 10-20k.
Thanks for this video. I have been machining some UHMW and the bit was screaming...I thought I was pushing it too fast! Quite the opposite. Good to know!
I was a CNC tech at a university for a while and getting back into it now with a beefy 4x8 machine from Industrial CNC. If you get the chance to cover general feeds and speed with specific materials breakdown, that would be amazing! Also, Love these videos! Is there a way to help support?
How do up-cut bits tear at the material, if you use a chamfer bit for the paths first? Like leaving a 1mm chamfer after all paths are complete... Is tear out at the top a problem in plywood?
Good advise here thanks. I am not new to CNC machining but I am new to the small machines. I recently purchased a Sainsmart 4040 pro and I am having trouble with chatter. I am cutting 1/4" Hickory and Walnut with bits from 1/8" up yo 1/4". So far I have had the best luck with a 3/16" single flute up cut tool. I am starting to think that the supplied spindle needs to be replaced with a heavier duty model. Any advise you can provide will be greatly appreciated.
Problem of Running to slow. If you have a hobby machine it is not good to slow down the rpm cause the spindle is probably to weak, Same if you increase the feed rate. For beginners with hobby machines i would recommend to buy single flutes endmills, which allows to run them with high rpm and slow speeds with the right feed rates. This helped me the most
NEVER use MDF EVER! Look at the materials it’s made from. It’s Carcinogenic and it’s made from wood dust, formaldehyde and urea resins. You are breathing the fine dust in when machining, even with a mask. I won’t allow this stuff in my home unless it’s sealed with an oil base finish.
@@darrellsaturnbigfoot Problem is that spoilboards are usually made of just this type of material. There are also other materials that are made in equally toxic ways. OBF, Particle Board, LDF, HDF, Plywood, Melamine boards, etc. You have to stick to solid wood only, to avoid the toxicity and even then the dust remains and will still pose a problem in the long run, by increasing your chances of developing COPD (Chronic Obstructive Pulmonary Disease). You can't avoid carcinogens when you're a maker. You can just look up the most harmful carcinogens and try to avoid those, but at the end of the day, even your own body is a carcinogen, as it only takes a single cell that doesn't split correctly, in order for it to mutate into a cancer cell. Cancer isn't just caused by exterior reasons. It can easily be caused by your own body fucking up.
Thank you for the video. Super helpful! Question - Can cnc machines use a 1/8” Bullnose router bit to de-edge and de-corner rectangle 1/8” polycarbonate? Would this bit run into the cnc table? Would the material need to be raised up off the table? Thank you for your time!
I’m looking to get into CNC and I’m not certain which machine I should get. I sell (mainly) American Flags, cutting boards, and Adirondack chairs I make. I was thinking I could use the CNC to engrave/personalize the cutting boards and use it to cut out parts for the chairs as well as personalize the chairs, and use it to make higher end American flags out of walnut, maple, and Paduak . Which CNC would you recommend I get to accomplish those goals ? Thank you
Thanks for sharing your knowledge im just getting into the cnc world and found this helpful, only complaint is would be nice to of seen a visual example when explaining what all the different drill bits do
Hello, I'm a newbie and at the end of your video strangely I've though exactly the opposite of what you were saying. "Speed up your RPM or slow down your feed rate..." to avoid friction as you said in the case of running the bit too slow
If your bit is spining too fast the cutting edge gets round for the next cut before the machine moved enough to present new material so it rubs on the already cut surface creating friction and heat, when cutting speed is correct the heat is carried away by the swarf and away from the bit, you can see this better when cutting metal. Check out the temperature of your swarf you will find its a lot warmer than the piece your cutting. I think he meant moving too slow for the rpm on the machine.
At about 4:00 you mention use of the half inch bit. I use a half inch bit in my cnc and its a hobby machine made out of HDPE and metal rails. Not sure if my experience is the same as yours because I run a half inch bit with ease. Perhaps its the type of cuts as well
Could use your help making a purchase on a cnc machine have a small little space in Massachusetts 12 x 25 I want to make furniture out of wood and plywood my furniture is no bigger than 24 x 36 I will also need to use joint cam
Hello, I’m a bit confused about the last part where you spoke about the machine running too fast, or too slow. Please correct me if I am wrong, but it seems like you said if my machine begins to scream, my bit is moving too fast but my machine is moving too slow. Is that correct? I was told to test my machines for its maximum speed and stuff. But I have no idea how to do that. Please clarify, thanks!
@@cutting-it-close oh okay, so it's either. That's what had me confused. Thanks for the clarification. There a FB group I'm in, I was told I'm supposed to find out the maximum speed of my CNC machine. You briefly covered that in the video. Do you have a video where you explain how that's done? Cause idk how to test my machine's maximum speed and stuff. Thanks!
Hello, wanted to ask about lead screw. Why do we need bearings while the lead screw is attached to the coupler and stepper motor, isn't the stepper motor and the coupler plus the housing, enough for the stability of the lead screw or in other words, what is the purpose of the lead screw bearing ? to cnc router ?
I ran a shift at a cabinet shop that laid off their $10/hr panel saw operator and leased a $250,000 CNC router to cut rectangles out of sheet goods. They took their best cabinet maker off the floor to convert CAD to CAM, one line of code at a time, because they didn't want to pay for the good software. When they went out of business I took a job at a high-end shop on Maui. They cut everything on a panel saw.
great video. I have a Laguna IQ and it's worked pretty much trouble free for 7 yrs now. Unfortunately, I accidentally "Wiped the Cache" on the hand-held controller and lost my Pulse Equivalent settings. Apparently Laguna customer service isn't open on weekends :( Any chance you could tell me what the Pulse Eqiv. settings are in the controller of your IQ?? They should be what mine are supposed to be. Thank you!
Hello sir I am using offline cnc controller and vector aspire. My machine starting z height is correct, but when program ends it will not maintain safe z height with material and many time it will clash to material and come back to home position.If you have any idea, how to resolve this issue, please reply to me
Great video and directions, I plan on getting a router over the next month. I am currently working with a co2 laser with LIGHT Burn. Do you work with lasers? I would like to see that video. SUBSCRIBED
I want to get into using a CNC machine as a hobby to be able to cut wood signs letters metal wood metal signs and so forth. What would you recommend as an affordable machine and do you know if there is anywhere to get Training? I live in South Carolina.
Nice video. Thanks for the info. I am never sure of my speed and feed. I carve MDF which just makes dust. I carved some Maple with half inch end mill shaping cut. Chips flew and it was obvious that the feed was matching the spindle speed, but I don't see this with smaller bits.
Ready to unlock CNC success? Join our Free Community - bit.ly/CNCStartup
I'm used to larger, corded routers ruclips.net/user/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
Love this book! ruclips.net/user/postUgkxpCNxqmAkyjN6NPx1fyB7QiEFWyO5mUWL it is simply one-of-a-kind! I really love it, because karah explained all tools required to have the job done, not mentioning the fabulous diy pallets ideas. I'm pretty sure this will be a fresh start in my new endeavour. Amazon was great, they delivered on time. Thank you!
Mistake #8: Cutting your hair with a CNC router
So, this is actually a great and very informative video! Everyone having fun with my comment should at least vote a thumb up for the video, pls.
great video, sorry just had to laugh about this comment. Thanks
🤣
You made me laugh. 👍
quite possibly the funniest comment ever...!!
Hahaha😂
I have been running a machine commercially for 2 years now and still feel like I have no idea what to charge, some jobs go so easy and others a very difficult! I have learned that even though the machine is "doing all the work", learning how to use it properly and efficiently is also a huge undertaking. Thanks for the tips, probably a little late for me but hopefully others are smart enough to start here!
Excellent work. I'm retired and ordered a 4x8 CNC kit. I know it's an ambitious decision to build since I have zero CNC experience but, I figured what better way to learn my machine. I'm hoping that it may help diagnose machine issues that may arise later. This video was very informative and well presented . Direct, to the point, and no annoying music. Keep 'em coming.
How’d it turn out for you?
Unfortunately I've been tied up with car projects and my art business that I haven't started yet.
its a year on, did you go with the CNC in the end? how did you get on? Im considering getting an 8x4 machine myself @@ravenartsandgraphics4456
Im ordering my cnc in the next week. And im glad ive been a cnc machinist for almost 20 years and a lot of what you said translates from machining steel to working with wood. Good advice. Cant wait to start making stuff
After my first year with my CNC I found myself in every mistale you mentioned. And I just had to go through it, like you said. Very helpful Video, thank you!
Hello!!
Great Video and you nailed it in regards to accepting mistakes, and learning, then moving forward. I have been in CNC for 25+ years, and as a machinist I understand speeds and feeds, the hardest part for me is getting used to working with wood, (0.005" tolerance doesn't exist in woodworking! and thank God for Wood Filler ) I have built a hobby machine and am making signs. and such for friends and family. My hardest thing is putting a price on the fun side of it, which is the creating. Cutting is fine, but taking an photo and carving it is the fun challenge for me, and also the fun. I look online to get comparisons from others so I have been using that as a price gauge. So far I know have been charging less as I am very gratified to see peoples reaction, but as retirement is getting closer, I would like to figure out what are realistic charges I should be making.
Thanks again and I will be watching your channel.
CNCing for over a year. Wish I'd seen your video when I started. Thank You.
just started looking into it. hows it going?
Thanks for that. I'm new to hobby level CNC machining with wood so I had no idea about those types of bits. Much appreciated.
Dude you are legit, I just found your video
I’ll learn more from you
Saludos desde West Coast
Nice detailed video. I've watched a lot of CNC videos, as I hope to eventually add one to my shop. This is the first one that covered these types of issues. I'd be interested in seeing your CNC machines and talk about what you like and don't like about each.
Just making a research on CNC machines and saw this very informative video. It's must watch before running CNC. Thanks a lot.
I've been a contractor in the painting industry for 40 years still doing the work only because I can't teach anyone what I've learned and tweeked sometimes I don't know how I even do it if you love what you do it's not work I love to keep learning the mind is a beautiful thing
I loved the endmill example with Fred. Great visual!
Thank you so much. I learned so much from this video.
Perfect video for me to watch before getting my CNC next week. Thanks and GIG EM, brother
Have you got a video showing the computer design process, & then taking that file to the cnc via usb?
How not to videos are just as valuable as how to vids. Good work.
Extremely well done without too much unexplained jargon. The cost calculations alone are worth watching this vid. multiple times especially since machine use time vs machine investment, Include dedicated work space, bits, materials for learning, final product material storage for material and possibly sound reduction in the work room. Then how does a retired non machinist price his/her time?
Thank you so much. Needed one place to understand all the things you mentioned. On top, nicely done. Two thumbs up!!!
Broke my bit today. What can be great video? About bits. Its life time, different materials? Low end, high end, sime special ones? Thank you for your effort
Excellent video! I have just got myself a hobby cnc 3018 machine and will keep in mind of how to not to make the mistakes you pointed out.
I must also agree very well done thank you…… I also have no experience, but I’ve always wanted to learn CAD and Cam
So much that my kid got an opportunity for an apprenticeship where his license through the state now and has been machining for 15 years so I do have a great support system … but your video was awesome so thank you for the information
Hilarious scream you built into your presentation - it made me laugh and I‘ll never forget it once it happens to me again!! 😅😅😅
Great instructional video on mistakes..im getting ready to purchase my first cnc and your video just cleared alot of spider webs in my head thank you
Thank you very much for sharing this. Super helpful.
Glad it was helpful!
I'm somewhere in the middle of learning basics of cnc and some of this stuff was very useful thanks!
Excellent video for beginner in wood CNC milling. I make all 7 mistakes from video when beginning hobby CNC mill woodworking. I learn it personaly at hard way.
greetings from me, cnc youtuber from Indonesia
Considering this. I want to say thanks to people who design, test and list every bolts nuts so beginners can start it out. Learning curve is painful, time and money costly
that CNC you're standing next to "starts" at $15,500 here in 2023. Would you film the exact same content today?
That’s crazy, so they took away the IQ it seems and only have the Pro edition which has the Automatic tools changer, just the IQ should only be like $7,000, I personally would not start with a small desktop CNC like that with an ATC it would not save you enough time on your toolpaths. That IQ Pro is the upgraded version of mine. I don’t know why they took down the cheaper model, makes no sense. I would not of been able to afford that 15K CNC when I was starting out.
what are your thoughts on the avid cnc line? I'm currently debating between the laguna IQ 2x4 and the avid PRO6060 5' x 5? This is my first cnc and I'm looking to grow it into a full time business but would like to spend between 10-20k.
Thanks for this video. I have been machining some UHMW and the bit was screaming...I thought I was pushing it too fast! Quite the opposite. Good to know!
Very HELPFULL video...
Thanks!
Useful information, thanks.
Glad it helped!
Nicely presented! Thanks!
Thank you , I get my first machine in September so this was great, it’s the cad/cam side I’m really nervous about.
Haw can I do to bye it
Can u tell us what are u making? Like everyday jobs..
Thanks for this video.. It's helpful 👌
I was a CNC tech at a university for a while and getting back into it now with a beefy 4x8 machine from Industrial CNC. If you get the chance to cover general feeds and speed with specific materials breakdown, that would be amazing! Also, Love these videos! Is there a way to help support?
How do up-cut bits tear at the material, if you use a chamfer bit for the paths first? Like leaving a 1mm chamfer after all paths are complete... Is tear out at the top a problem in plywood?
Be careful using silicone lubricant in a shop where you will do any painting, especially spray painting. Silicone is the enemy of paint.
Thank goodness. First person on my wavelength I’ve seen on RUclips.
From the land down under 🇦🇺
White lithium is a better choice without buying specialist stuff.
@@AG-cg7lk yep, I use it on my CNC and drum sander.
You talked about running the bit too slow, what kind of chip load per tooth do you recommend? Are the tools high speed steel or carbide?
Can you cut metal with that particular cnc machine ?
Hi, what are the brand CNC machines that you use?
Awesome video. Is there a way the jig can be made without a drill press?
Good advise here thanks. I am not new to CNC machining but I am new to the small machines. I recently purchased a Sainsmart 4040 pro and I am having trouble with chatter. I am cutting 1/4" Hickory and Walnut with bits from 1/8" up yo 1/4". So far I have had the best luck with a 3/16" single flute up cut tool. I am starting to think that the supplied spindle needs to be replaced with a heavier duty model. Any advise you can provide will be greatly appreciated.
Problem of Running to slow. If you have a hobby machine it is not good to slow down the rpm cause the spindle is probably to weak, Same if you increase the feed rate. For beginners with hobby machines i would recommend to buy single flutes endmills, which allows to run them with high rpm and slow speeds with the right feed rates. This helped me the most
Thanks for the great tips
Great video. I'm looking into buying my first CNC and cutting some graphite
Watch out with the silicone lube. It can contaminate your finish and give you fish eyes.
Very good video. All wheat and no chaff.
Is there any formula related to bit size vs motor rpm vs cutting depth?
What's the best CNC you can recommend for a total beginner for under 500?
Same question but with a $1000+/- budget... I’ve heard that not all CNC a can cut radius’s well.
MDF stands for Medium-density fibreboard, not "micro", right?
Right
NEVER use MDF EVER! Look at the materials it’s made from. It’s Carcinogenic and it’s made from wood dust, formaldehyde and urea resins. You are breathing the fine dust in when machining, even with a mask. I won’t allow this stuff in my home unless it’s sealed with an oil base finish.
@@darrellsaturnbigfoot so basically its like a cigarette.
Harder to light...
@@darrellsaturnbigfoot Problem is that spoilboards are usually made of just this type of material. There are also other materials that are made in equally toxic ways. OBF, Particle Board, LDF, HDF, Plywood, Melamine boards, etc. You have to stick to solid wood only, to avoid the toxicity and even then the dust remains and will still pose a problem in the long run, by increasing your chances of developing COPD (Chronic Obstructive Pulmonary Disease).
You can't avoid carcinogens when you're a maker. You can just look up the most harmful carcinogens and try to avoid those, but at the end of the day, even your own body is a carcinogen, as it only takes a single cell that doesn't split correctly, in order for it to mutate into a cancer cell. Cancer isn't just caused by exterior reasons. It can easily be caused by your own body fucking up.
Noticed your Aggie Ring. Howdy from Kansas. Whoop! Class of '86.
I’d like to introduce you to Glenn from the comment below!!
Whoop
Thank you for the video. Super helpful!
Question - Can cnc machines use a 1/8” Bullnose router bit to de-edge and de-corner rectangle 1/8” polycarbonate?
Would this bit run into the cnc table? Would the material need to be raised up off the table?
Thank you for your time!
I’m looking to get into CNC and I’m not certain which machine I should get.
I sell (mainly) American Flags, cutting boards, and Adirondack chairs I make.
I was thinking I could use the CNC to engrave/personalize the cutting boards and use it to cut out parts for the chairs as well as personalize the chairs, and use it to make higher end American flags out of walnut, maple, and Paduak . Which CNC would you recommend I get to accomplish those goals ? Thank you
Very informative video. Nice way of explanations makes some things very clear. I would like to see some tips of yours regarding feeds and speeds.
@@cutting-it-close Cheers buddy thanks a ton!!!
very very helpful
Thanks for sharing your knowledge im just getting into the cnc world and found this helpful, only complaint is would be nice to of seen a visual example when explaining what all the different drill bits do
Very well explained! Thank you!
Hello,
I'm a newbie and at the end of your video strangely I've though exactly the opposite of what you were saying. "Speed up your RPM or slow down your feed rate..." to avoid friction as you said in the case of running the bit too slow
If your bit is spining too fast the cutting edge gets round for the next cut before the machine moved enough to present new material so it rubs on the already cut surface creating friction and heat, when cutting speed is correct the heat is carried away by the swarf and away from the bit, you can see this better when cutting metal. Check out the temperature of your swarf you will find its a lot warmer than the piece your cutting. I think he meant moving too slow for the rpm on the machine.
@@incubatork Ok, got it thanks Derek.
Great video.. 👍
Just starting out. Great video. Many Thanks.
Thank you very much
keep your videos coming!
Thanks....for giving valuable information
You've shared the video at the right time. I will need more information since am working on a DIY CNC router.
@@cutting-it-close am waiting to watch it
At about 4:00 you mention use of the half inch bit. I use a half inch bit in my cnc and its a hobby machine made out of HDPE and metal rails. Not sure if my experience is the same as yours because I run a half inch bit with ease. Perhaps its the type of cuts as well
How fast are you running it?
Hi, It's great, I'm a biggener what cnc machine you recommend for me
Could use your help making a purchase on a cnc machine have a small little space in Massachusetts 12 x 25 I want to make furniture out of wood and plywood my furniture is no bigger than 24 x 36 I will also need to use joint cam
20:31 nice lol
Superb video, very informative - well done! Keep them coming!
Thank you I have learned so many things from your video
Hello, I’m a bit confused about the last part where you spoke about the machine running too fast, or too slow. Please correct me if I am wrong, but it seems like you said if my machine begins to scream, my bit is moving too fast but my machine is moving too slow. Is that correct? I was told to test my machines for its maximum speed and stuff. But I have no idea how to do that. Please clarify, thanks!
So the screaming is vibration from running it too fast or too slow. Too fast is vibration from deflection, too slow and it’s vibration from rubbing
@@cutting-it-close oh okay, so it's either. That's what had me confused. Thanks for the clarification. There a FB group I'm in, I was told I'm supposed to find out the maximum speed of my CNC machine. You briefly covered that in the video. Do you have a video where you explain how that's done? Cause idk how to test my machine's maximum speed and stuff. Thanks!
Hello, wanted to ask about lead screw. Why do we need bearings while the lead screw is attached to the coupler and stepper motor, isn't the stepper motor and the coupler plus the housing, enough for the stability of the lead screw or in other words, what is the purpose of the lead screw bearing ? to cnc router ?
Love your videos! Keep it up👍
Thanks for advice
I ran a shift at a cabinet shop that laid off their $10/hr panel saw operator and leased a $250,000 CNC router to cut rectangles out of sheet goods. They took their best cabinet maker off the floor to convert CAD to CAM, one line of code at a time, because they didn't want to pay for the good software. When they went out of business I took a job at a high-end shop on Maui. They cut everything on a panel saw.
Fuckin Howlies
Sir how to calculate Y axis linear motion helical gear pulse
Use the kinibeling pin module!
Duhhhh!
MDF mean medium densty fiberboard. its ok mistake never stop in our life. thans for the information brother .
Thank you
I have a problem with z axis it's dropping down while the machine is moving ,what should I do?
great video. I have a Laguna IQ and it's worked pretty much trouble free for 7 yrs now. Unfortunately, I accidentally "Wiped the Cache" on the hand-held controller and lost my Pulse Equivalent settings. Apparently Laguna customer service isn't open on weekends :( Any chance you could tell me what the Pulse Eqiv. settings are in the controller of your IQ?? They should be what mine are supposed to be. Thank you!
Hello sir
I am using offline cnc controller and vector aspire. My machine starting z height is correct, but when program ends it will not maintain safe z height with material and many time it will clash to material and come back to home position.If you have any idea, how to resolve this issue, please reply to me
What software you are using usually?
Great video and directions, I plan on getting a router over the next month. I am currently working with a co2 laser with LIGHT Burn. Do you work with lasers? I would like to see that video. SUBSCRIBED
Very Nice
Awesome video!
I want to get into using a CNC machine as a hobby to be able to cut wood signs letters metal wood metal signs and so forth. What would you recommend as an affordable machine and do you know if there is anywhere to get Training? I live in South Carolina.
Very interesting and clearly explained basics for CNC learners...like myself !!!
Excellent video. Where were you 5 years ago? 😂. Great job!
Nice video. Thanks for the info. I am never sure of my speed and feed. I carve MDF which just makes dust. I carved some Maple with half inch end mill shaping cut. Chips flew and it was obvious that the feed was matching the spindle speed, but I don't see this with smaller bits.
Which machine should I buy I want to do wood letter cutting up to 1/2 inch?
check out BobsCNC. very good price range and unmatchable customer service.
A nice video, but are you using for lubricating garage door lubricant only? Don't you need to use grease for ball screws and oil for linear guides?
Sir can you explain tool setting for iron carving
Thanks Buddy You Explained it very well
Howdy from Indiana! BQ ‘85. Whoop!
Hey Glenn can I introduce you to Tom from the comment above.
Whoop!