I love finding a car sitting in the yard for years, put in some love, time and resources, and getting it back on the road. It's what being a car guy is all about
Growing up(back in the 80's), my buddy had a 76 Dart (standard version) that we kinda fixed up with a bit of bondo and spray paint. No it wasn't anything of quality but it made the rounds cruising the town. And for a couple of teens it got us in a lot of parties 🎉
I remember my brothers 72 dart, avocado green and the leaning tower of power. I was so impressed. Love these types of videos where you start with an easily affordable car and get it back on the road with tools most people have.
In 1972 my parents purchased a new Dodge Darts Swinger Special. It had a 225 CID slant six, a three on the tree, manual brakes, manual steering, and no A/C. The only thing it did have was an AM radio with a single dash speaker. It was the car I took my driving test in and that three point turn was a beast with manual steering. I had to use five points to turn, but I still passed!
My first Dodge was a 72 Demon 340. A lot of people complain about the grille, but I loved it. Rusted out but ran like a scalded dog. Right rear axle seal leaked and made the brakes skid when applied. I blocked off the right wheel cylinder, you want to talk about a tire roaster!
We had a '72 Dart Swinger when I was a kid. I learned to drive in that car. It had a 318 V-8 so it was peppier than a slant 6. It was gold with a dark green vinyl top and had magnum 500 wheels...it was a pretty sharp looking car. I wish I still had it.
Minor point, but brake shoes are not about momentum, but leverage. Assumimg a top anchor pin, the front shoe drives the rear into position during forward braking - rear shoe does most the braking, so it must have more surface. If the pin was on bottom [I think some pre war cars tried that], its the exact opposite: rear shoe drives the front, which would put the bigger shoe there.
I've had several Darts and B & E body Mopars, my first car being a 66' Dart. I wanted a 67 - 69 but couldn't afford one but found the 66'. It was wrecked but only cost me $75 back in 77'. fast forward and 5 Mopars later I just picked up a 69' with a running 440 with a lot of good upgrades. Can't wait to put it back on the road and cruise my local car scene.
@@Pracaupodstaw Yep, that's why you gotta look outside the box for projects now, The HOT new build out here in Arizona are the Smog/Malaise Era cars from 73-85 because there plentiful and cheap often still running and driving for under a 3 grand. I daily drive a 73 Buick Regal that I bought for $1200 right after I got here and drove it home and then put another 5 k ish into, I just bought a 76 Cutlass for $2200 That I'm going to build into a weekend car.
@@TheREALOC1972 Interesting. It is an option. I would obviously prefer a car from the 60s (possibly 50s or even 40s), but you know, the budget does not always allow you to fully realize your dreams. u, in Central Europe, an American muscle or pony is always a pearl or even a diamond - regardless of the decade of production.
@@Pracaupodstaw it's just in Central Europe where's that's a problem, I have 8k ish in my Regal you can't even look at a roller of most older muscle cars for that and that's just the start, 8k and mine is done.....
About 2 weeks ago, I was given an '89 Gran Fury AHB. It was bought at auction,the guy drove it a little and parked it next to his '74 Gran Fury state car he also got at auction years before. The man retired, gave them to my buddy, who kept the '74. Both are all there & complete...
That is one badass Dart, great transformation. I’d love to have that car, I’d leave the paint just the way it is. Never have to stress or worries about it; love it when they look like that.
I truly dreamed of finding this EXACT car for my dad. Same color and everything. He had one in high school. Sadly he passed last year. Now it would be in his memory.
9:03 For those watching-reuse the original locking ring whenever possible. They're a _much_ better fit than any aftermarket rings. That right lower control arm is a replacement.
I've got a 72 plymouth scamp that I had to drive around on a big gatorade bottle for a few weeks till I got the new gas tank. Luckily I lived close enough to base I could make a one way trip on one bottle.
My dad has a 1964 Dart GT that was his aunts car from new , 2 door 225 slant 6 Anniversary Edition . With a funky push button shifter and 3 speed auto .
I like Tommy too but I've been a customer of Rock Auto for several years. My neighbor turned me onto them when I first moved to Florida in 2010. he was building a 96 S-10 and just about every part on that truck he got from Rock Auto, he was a parts guy at a GM Dealership for years though so he certainly knew what he was doing when it came to parts.
1974 was the first year they had the 360 in a Dart, Demon or Duster. I am pretty sure they never offered the 360 in the Swinger either , only in the Dart Sport which was the renamed Demon.
I was wondering about that also. My roommate bought the first 360 Duster straight off of the showroom floor. We would go street racing against the locals on the weekends. 😉
@@Darknamja yeah, I had a full load 1974 Dart Sport with the 360 as well. For 1973 Chrysler muscle cars had the 340. The 360 had an externally balanced crank and the 340 had an internally balanced crank.
@@Darknamja lol, I bought mine new as well. The parts manager had it for a day as a full load demo car and I had a friend who was a tech there and he told me about the car so I walked into the dealership and said “I want the parts managers demo car”. My friend said that he was pissed!
I agree with the "boring 350 Chevy" build but there's a reason people do them by the dozens, they made the 350 for 50 years and never really changed much, there's millions upon millions of them which means they are dirt cheap, the 350 gives you the best bang for your buck.
I had the same car when I was 20yrs old. Would love to have another. Let me know if it's for sale. Great simple work to revive it and put it back k on the road. It's a keeper.
I've seen a Dart STINGER but I'm not sure its for sale... [stinger was the next level down from the Demon] And I have a 413 sitting in my driveway just BEGGING for some rework and something smaller than an 11,000 pound motor home to live inside.
That's the car my grandmother bought in 1972. I wanted her so much to give/sell it to me for when I would turn 16 but instead she exchanged it at the dealer for a Reliant K...
I owned a 71 225 slant six. If you put it on jack stands you had better not open the doors. Unless you wanted to drive around a few miles until the frame settled.
Hey guys cool video; quick question-where do you connect the other side of that makeshift ignition wire? You put one end on the positive side of the coil and is the other end wrapped around the red wire on the positive battery terminal? or on the relay?
Im going to fix a 72 javelin like this, it's been sitting for over 20 years...Im going to put a 460 in it only because i have one laying around an it will be cheap..
That;s still cheap as hell they, I mean a Basic bitch Kia Rio cost you 17k and a basic bitch Hyundai Elantra is 20k..... a basic bitch 2023 V6 Mustang is 32k.... a basic bitch 2023 Malibu is 25k.... 22k is a STEAL for an actual muscle car with a 340 V8 in it.....
Y'all need to come.fix up My 76 Maverick 4 door. It needs an engine. I was planning to put a 302 in it but then My health got to bad for Me to be able to do the work it needs.
That's something that only takes a couple minutes plus doesn't need to be done until you get inspected. In alot of states it will pass inspection as long as the crack doesn't obscure the drivers vision and this one doesn't.
all mopars leaked inside from the front Cowl ,within less then 10 years most rotted away if they were not garaged or the owners did not remove the Floor Body plugs to drain out the soaked floors
I bought one in 2004 when I came back from Iraq for $1200, mine had a 318 also but it was a 4 door though but I didn't mind. I just wanted something to ticker on and take the wife and kids to cruises and car shows on the weekend. it was green on green on green. It was in phenomial shape when I bought it I didn't have to much to it. cleaned and rebuilt the carb and basically cleaned it up, painted everything that was supposed to be black black again repainted the block corporate blue, and the intake and valve covers silver and of course new gaskets all around. It was a great little car, I even took it to San Antonio from Central Missouri for a Army leadership course, AM radio only on the way down but I fixed that quickly while I was in San Antonio, went bought a cheap little AM/FM Radio and cd player while I was there because just having an Am radio I didn't get a damn thing on the radio for most of the drive and 14 hours in almost complete silence sucked. Got divorced in 2007 but I kept that car until 2014 because I loved it so much.
First off it's Disc Brakes... and 2nd, not right off the flip when your doing a budget daily driver, Disc Brakes is literally very very very low on the "must do" list because the drum brakes still work. You gotta get the car running and driving long before you do a disc brake conversion. It needed alot of engine work, new fluids, new gaskets, a completely new fuel system and brakes that work, it also needed cleaned up and will need a paint job LONG before it needs disc brakes. Disc brakes is an "upgrade" and not something that is needed right off the bat when you can use that 2-3 grand on other things.
hi i just watch this ep again and the owner should finished restoreing the car. needs head liner plus a new black paint job plus a vinly roof top and it will look great again k
Watch more Detroit Muscle: ruclips.net/video/iMCKJCRxu1c/видео.html
Who wants to buy a 440
I love finding a car sitting in the yard for years, put in some love, time and resources, and getting it back on the road. It's what being a car guy is all about
Growing up(back in the 80's), my buddy had a 76 Dart (standard version) that we kinda fixed up with a bit of bondo and spray paint. No it wasn't anything of quality but it made the rounds cruising the town. And for a couple of teens it got us in a lot of parties 🎉
I remember my brothers 72 dart, avocado green and the leaning tower of power. I was so impressed. Love these types of videos where you start with an easily affordable car and get it back on the road with tools most people have.
In 1972 my parents purchased a new Dodge Darts Swinger Special. It had a 225 CID slant six, a three on the tree, manual brakes, manual steering, and no A/C. The only thing it did have was an AM radio with a single dash speaker. It was the car I took my driving test in and that three point turn was a beast with manual steering. I had to use five points to turn, but I still passed!
I loved this episode, hope the guy enjoys having his old dart back on the road! 😎👍🏻
My first Dodge was a 72 Demon 340. A lot of people complain about the grille, but I loved it. Rusted out but ran like a scalded dog. Right rear axle seal leaked and made the brakes skid when applied. I blocked off the right wheel cylinder, you want to talk about a tire roaster!
We had a '72 Dart Swinger when I was a kid. I learned to drive in that car. It had a 318 V-8 so it was peppier than a slant 6. It was gold with a dark green vinyl top and had magnum 500 wheels...it was a pretty sharp looking car. I wish I still had it.
Minor point, but brake shoes are not about momentum, but leverage. Assumimg a top anchor pin, the front shoe drives the rear into position during forward braking - rear shoe does most the braking, so it must have more surface. If the pin was on bottom [I think some pre war cars tried that], its the exact opposite: rear shoe drives the front, which would put the bigger shoe there.
You guys are killin' me. I had a 72 Dart Swinger...I miss that car sometimes. I can still "smell" it lol.
What a phenomenal acquisition!! Very little rust & with a few bucks & some TLC, that turned out to be a really nice vehicle!! Great job!!👍
I've had several Darts and B & E body Mopars, my first car being a 66' Dart. I wanted a 67 - 69 but couldn't afford one but found the 66'. It was wrecked but only cost me $75 back in 77'. fast forward and 5 Mopars later I just picked up a 69' with a running 440 with a lot of good upgrades. Can't wait to put it back on the road and cruise my local car scene.
We could only dream of finding a classic with solid bones like this
They are out there, you just gotta look.
They are out there somewhere. Only fewer and fewer ordinary people can afford them.
@@Pracaupodstaw Yep, that's why you gotta look outside the box for projects now, The HOT new build out here in Arizona are the Smog/Malaise Era cars from 73-85 because there plentiful and cheap often still running and driving for under a 3 grand. I daily drive a 73 Buick Regal that I bought for $1200 right after I got here and drove it home and then put another 5 k ish into, I just bought a 76 Cutlass for $2200 That I'm going to build into a weekend car.
@@TheREALOC1972 Interesting. It is an option. I would obviously prefer a car from the 60s (possibly 50s or even 40s), but you know, the budget does not always allow you to fully realize your dreams. u, in Central Europe, an American muscle or pony is always a pearl or even a diamond - regardless of the decade of production.
@@Pracaupodstaw it's just in Central Europe where's that's a problem, I have 8k ish in my Regal you can't even look at a roller of most older muscle cars for that and that's just the start, 8k and mine is done.....
Love the A-body, had three of them, my first one would be lucky to run 18 seconds in the 1/4, but my last one ran 10s 🤟
Absolutely awesome. I dream of finding one like this👍
Goat, if you are watching this then you know. Miss the car days with Swinger bro!
Great episode & nice of RockAuto to provide all the parts & to be recognized for it.
About 2 weeks ago, I was given an '89 Gran Fury AHB. It was bought at auction,the guy drove it a little and parked it next to his '74 Gran Fury state car he also got at auction years before. The man retired, gave them to my buddy, who kept the '74. Both are all there & complete...
Wow, that takes me back! Been DECADES since I replaced drum shoes!
Best part is when they put the guy from Rock auto in to test drive it.... Hahahaha! Literally I hope they tested it before hand bahahah
That is one badass Dart, great transformation. I’d love to have that car, I’d leave the paint just the way it is. Never have to stress or worries about it; love it when they look like that.
I truly dreamed of finding this EXACT car for my dad. Same color and everything. He had one in high school. Sadly he passed last year. Now it would be in his memory.
nice to see you guys putting out a new video... when I grew up the people across the road owned 2 darts .. they lasted forever.
Wish I had kept my 69 GTS 340 of all the muscle cars I ever owned it’s the one I miss the most
9:03 For those watching-reuse the original locking ring whenever possible. They're a _much_ better fit than any aftermarket rings.
That right lower control arm is a replacement.
Finally a 72 dart. Ive been building mine, but ive never seen a show like these work on one.
Just bought one today cash solid car and has the original 318 and is in great shape for pretty cheap..looking forward to my rebuilding of it coming up
I've got a 72 plymouth scamp that I had to drive around on a big gatorade bottle for a few weeks till I got the new gas tank. Luckily I lived close enough to base I could make a one way trip on one bottle.
My dad has a 1964 Dart GT that was his aunts car from new , 2 door 225 slant 6 Anniversary Edition . With a funky push button shifter and 3 speed auto .
I used to have a 69 Swinger 340, I have a few videos on my channel. I sold it but kind of wish I hadn't, it was patina style.
What a nice transformation that anyone can do thx for sharing guys
I had 72 Dart back in the day it was the slant 6 but looking back I wish I had that car back many times over ❤
keeping it running and out of the crusher
great show.. I watch because of Tommy and his personality. And I'm now a fan and customer of RockAuto.
I like Tommy too but I've been a customer of Rock Auto for several years. My neighbor turned me onto them when I first moved to Florida in 2010. he was building a 96 S-10 and just about every part on that truck he got from Rock Auto, he was a parts guy at a GM Dealership for years though so he certainly knew what he was doing when it came to parts.
Nicely done guys......................
I brought a 71 swinger almost a year ago and it's almost ready to get stretched out on the road can't wait and it's hemi orange
That is absolutely awesome! Love the car.
1974 was the first year they had the 360 in a Dart, Demon or Duster. I am pretty sure they never offered the 360 in the Swinger either , only in the Dart Sport which was the renamed Demon.
I was wondering about that also. My roommate bought the first 360 Duster straight off of the showroom floor. We would go street racing against the locals on the weekends. 😉
@@Darknamja yeah, I had a full load 1974 Dart Sport with the 360 as well. For 1973 Chrysler muscle cars had the 340. The 360 had an externally balanced crank and the 340 had an internally balanced crank.
That's right. Options were 225 -6 or 273, 318 v-8. People just stick on whatever badges or stickers like here.
@@Darknamja lol, I bought mine new as well. The parts manager had it for a day as a full load demo car and I had a friend who was a tech there and he told me about the car so I walked into the dealership and said “I want the parts managers demo car”. My friend said that he was pissed!
Dodge Dart Swinger
Damm, Tommy, Missed seeing you !! 2 other guys seem to take over your show ... They are Not my Style BUT I am Very glad your BACK !!!
My Grandma had a Dart with a big block. I threw up in that car a lot... Haha
Had a blue one back in the day with a 318 it was wicked
Amazing mopar
I have a 70 dart 340 plum crazy so I'm going to enjoy this
Oh jeez not another boring 350 Chevy build it's actually a Mopar build!💞
I agree with the "boring 350 Chevy" build but there's a reason people do them by the dozens, they made the 350 for 50 years and never really changed much, there's millions upon millions of them which means they are dirt cheap, the 350 gives you the best bang for your buck.
Or worse.... Another LS swap..
Can you look at the old tank and see if there was a sock filter on the line. Dodge said it didn't but mine was about 3" long.
I had the same car when I was 20yrs old. Would love to have another. Let me know if it's for sale. Great simple work to revive it and put it back k on the road. It's a keeper.
I'm watching this while in the middle of restoring a 69 Chrysler Valiant based on the Dodge Dart. Inspirational.
Nice 👍
I've seen a Dart STINGER but I'm not sure its for sale... [stinger was the next level down from the Demon]
And I have a 413 sitting in my driveway just BEGGING for some rework and something smaller than an 11,000 pound motor home to live inside.
Nice! Now Rockauto needs to donate some Sassy Grass Green Paint🏁🤟
Always wanted a 1970 Dart, but a ‘72 would be ok 😉
A guy I worked with back in the 80s had a 73 swinger,had less issues than this one but it was a runner and no 6 under the hood either
Good luck. I hope you make it through the whole 24 👍👍
Had a 70 swinger with a slant 6 could not kill that car we had some much fun beating on that carcwish i still had it to clean up and make a daily
That's the car my grandmother bought in 1972. I wanted her so much to give/sell it to me for when I would turn 16 but instead she exchanged it at the dealer for a Reliant K...
wish they showed more stuff on how it was done. I guess it's mostly "check it out, dudes doing stuff with a cool car. it's magic"
I found a 72 in a barn problem was it was my barn!
I owned a 71 225 slant six. If you put it on jack stands you had better not open the doors. Unless you wanted to drive around a few miles until the frame settled.
Mopar Baby! Hey Tommy!
My big brother Chris Stephens got his ol dart on TV way to cool
Hey guys cool video; quick question-where do you connect the other side of that makeshift ignition wire? You put one end on the positive side of the coil and is the other end wrapped around the red wire on the positive battery terminal? or on the relay?
I have a 72 dart Swinger that is in a body shop for a repaint
Awww MAN!!!! make's tha berries tingle!
It's the underrated Dodge Ruster
Frikkin sweet 👍🏼👍🏼
@2:23 is like my Dart
Gotta love it when people come in with new trailer and winch. Kinda scares me.
Show how to replace the dash pad
Swinging was popular in the 70s
Would look great in the crusher as recycled beer cans
Im going to fix a 72 javelin like this, it's been sitting for over 20 years...Im going to put a 460 in it only because i have one laying around an it will be cheap..
"for just $3000.00 (1972)" = $22,000 (2023) in todays dollars.... inflation adjusted....
That;s still cheap as hell they, I mean a Basic bitch Kia Rio cost you 17k and a basic bitch Hyundai Elantra is 20k..... a basic bitch 2023 V6 Mustang is 32k.... a basic bitch 2023 Malibu is 25k.... 22k is a STEAL for an actual muscle car with a 340 V8 in it.....
Save the classics!
Y'all need to come.fix up My 76 Maverick 4 door. It needs an engine. I was planning to put a 302 in it but then My health got to bad for Me to be able to do the work it needs.
Rock Auto, come save me. I've spent plenty of money with you.
What about the duster 340. 1970
i would have come back to the garage with a mild spray of steam coming out from under the hood lol
My second car was a 1972 dodge demon with the 360
Swap in front disc brakes from another dart?
Awesome video🤘🤘 I would install a windshield and wipers before you get her back driving daily. 😂
That's something that only takes a couple minutes plus doesn't need to be done until you get inspected. In alot of states it will pass inspection as long as the crack doesn't obscure the drivers vision and this one doesn't.
all mopars leaked inside from the front Cowl ,within less then 10 years most rotted away if they were not garaged or the owners did not remove the Floor Body plugs to drain out the soaked floors
Call it the Lawn Dart.
I can't believe you didn't at least convert the fronts to disc brakes.
It has a nicely sized engine in it.
They could've squeezed in a few more shout outs to rock auto easily. Jeez
Yeah the 383 didn't come in a swinger it only came in a dart GTS but in 1969 you could get a 440 also
Damn, I would never waste any time on those front drum brakes. IMO, no performance car should go without discs.
Does it have a 340 or 360 which is on the hood scoop?
Ironically, I own a 69 Dart 340, 4 speed and a 72 Dart 360 with a 727 auto.
Finding something like that where I live would cost you thousands
I bought a 72 Dart in the 80s for $400. Not anymore at that price. 2d. 318 engine of course green on green
I bought one in 2004 when I came back from Iraq for $1200, mine had a 318 also but it was a 4 door though but I didn't mind. I just wanted something to ticker on and take the wife and kids to cruises and car shows on the weekend. it was green on green on green. It was in phenomial shape when I bought it I didn't have to much to it. cleaned and rebuilt the carb and basically cleaned it up, painted everything that was supposed to be black black again repainted the block corporate blue, and the intake and valve covers silver and of course new gaskets all around. It was a great little car, I even took it to San Antonio from Central Missouri for a Army leadership course, AM radio only on the way down but I fixed that quickly while I was in San Antonio, went bought a cheap little AM/FM Radio and cd player while I was there because just having an Am radio I didn't get a damn thing on the radio for most of the drive and 14 hours in almost complete silence sucked. Got divorced in 2007 but I kept that car until 2014 because I loved it so much.
Disk break conversion needed.
First off it's Disc Brakes... and 2nd, not right off the flip when your doing a budget daily driver, Disc Brakes is literally very very very low on the "must do" list because the drum brakes still work. You gotta get the car running and driving long before you do a disc brake conversion. It needed alot of engine work, new fluids, new gaskets, a completely new fuel system and brakes that work, it also needed cleaned up and will need a paint job LONG before it needs disc brakes. Disc brakes is an "upgrade" and not something that is needed right off the bat when you can use that 2-3 grand on other things.
Don't completely trust pictures of the way it was. Adjusters on my Silverado were swapped left to right.
That guy seems like he got his whole personality from modern country music.
hi i just watch this ep again and the owner should finished restoreing the car. needs head liner plus a new black paint job plus a vinly roof top and it will look great again k
Of all the tools all you guys should have and I never see is a battery post brush tool. Basic tool everyone should have! 😬😬🙄
a beveled file does the same thing.....
Not a fan of that particular fuel filter, but I like marshmallow roasts
16:57 ....come on guys...
What?
Dylan missed one!
Why the Hell would you paint the rims black instead of the original silver?