no its actually not....its too much paint and his spray pattern is all over the board, just because it looks satisfying with coverage and the speed hes doing it at doesn't mean its right, I bet you any money after he applied the next coat he got a couple of runs with the gun adjusted like that, also he failed to do the edges and angular surfaces first, and yes i have painted and done bodywork before
@@cloakedgtyes but it's not gonna run that stuffs base it's gonna flash before the next coat no single stage here 😂 I own a bodyshop and I'm the painter 😅 iv been hearing great things about this line too very tempted to give it a try. I know axalta has some water born stuff that covered in one coat and you could really hammer it on and it just stuck like glue 😂 think 3xs the thickness on a coat compared to the old solvent from way back wild the first time I shot it. But it's also water so wet beds and long dry times or lots of bakes make it kinda suck. This is solvent from what I understand but very similar to water in how it shoots and it kinda lays itself down from what I understand
@@oliverscorsim oh ok i get it, if it were me id still spray it lightly make sure it gets coated nice and slowly I'm just very precautious because re sanding it just makes it a nightmare 😂 and it doesnt hurt to be, i did single stage metallic my first time the only run was on the rear bumper where there was an edge and a corner, so you can only see it like really up close, its more of a drip the size of a teardrop but, its just a delicate process, mistakes are annoying to deal with
Hell yeah I'm 71 and still painting but sometimes I'm doing it blind and it still comes out dammmm good. Light is 'brilliant' idea, will see if I can modify something similar.
Light on a spray gun? An extra article to clean after painting expressly after all the overspray that is on it bad enough cleaning the spray gun itself now you have a light to contend with.. I'd rather paint in a well lit shop or outside..
@@pieterbezuidenhout2741most paint supply stores, where you’re getting your materials. They should have them in stock. Two of my local stores have them in stock.
@@paulreiser9179Pas forcément. Si c'est une peinture acrylique ça brille direct et pas besoin de vernis. Cette peinture est très pratique pour les petites surfaces car elle sèche rapidement.
Nice choice for the sealer and the base coat covered beautifully on the first coat. A lot of people don’t use the right color sealer and it makes all the difference in the world when it comes to being good at color matching.
Wow. The coverage of this is impressive, especially at the speed your moving. It looks as if your guns on max and just flooding it on because it’s covering so well. 👌🏻👌🏻
High Volume/ Low Air Pressure System .......Needs more Lighting on the Walls of the Booth, Though then you can use Normal Spray Gun without a Torch....LoL
WOW! This is a painter and a master of his craft. I been around a lot of automotive painters in my time and he's the best I have seen. I would have hired this guy in a minute and tried really hard to keep him on the payroll! I had my motorcycle paint in a blue metallic very similar to this one. Yes my favorite color is blue and this is beautiful. Keep up the good work man. Have a nice day.
This does a good job of showing how important it is to have good lighting in a spray booth. An extra light is a cool idea, but it really shows how marginal this particular spray booth is lit.
Да, круто конечно. Но когда смотрю такие ролики, начинаю представлять сколько работы было проделано до покраски. Такие мастера на вес золота, которые идеально могут сделать.
Obviously not this guy's first rodeo! Probably more like his thousandth! Everything about this video, from the color, to the tools used, to the application technique, to the viewing satisfaction, is perfect!
When you first started i thought it looked like it was going on a bit heavy, but the speed you was moving was appropriate for the amount of paint coming out. Nice colour too.
Agree at first I was skeptical cause how close he was, but the speed he was going at was perfect leaving no time for over spray and the flicks were great.
If he was using anything else he would have runs everywhere on that car. That’s not how you paint a car. You don’t just start anywhere. The equipment and paint saved his ass.
Делитант видео сразу! Движение рук и понимание как ложиться краска ноль. Хорошие , современное оборудование дала возможность проходимцам снимать ролики!
Videos like these makes me wish i never left paint. Im in charge of calibrations and all mechanical related problems these days, and this really makes me miss the booth.
Краскопульт прикольно хороший, орошим пуликом и дурак сможет покрасить. Но автор респект он не дурак, знает какие движения и когда делать. Красиво респект 👍👍
@@Nico76555 il parle en terme de technique. Je pense effectivement comme lui. Il y a plusieurs couches à mettre dont le vernis. Tout doit être fait rapidement pour que les différentes couches se superposent mais s’unissent aussi. Ne pas faire de coulures, de sur / sous épaisseurs, de traces etc. C’est un métier. Et je ne parle même pas de toutes les étapes d’avant qui sont encore plus techniques ( carrosserie en général ) car ce n’est pas le sujet. C’est pas le le truc le plus technique du monde c’est sur mais c’est pas à la portée du premier venu que de faire une peinture parfaite comme un pro.
I think it’s called a Luma LUMA3 look it up and see if it looks the same buddy. Good luck to you man. I’m trying to find out everything I can about it too because he spread the hell out of this car and it looks like he has three coats on the first coat so he’s definitely a pro
I never see people who spay properly and wonder why they’re paint has to be sanded so much. Why are you spraying 2” from the work space? Just because you spray fast doesn’t mean you did a quality job.
I have sprayed both. i will take the debeers over ppg all day long. But if you like the wet on wet application I HIGHLY recommend Spies Hecker. I get coverage in a 1 1/2 coats no need to go back in for a metallic orientation coat. 1 1/2 coat of base dry it with air and boom your clearing
Go to Inlinepaintandbody.com to a buy new paint gun!
How much that gun go for?
That is a dope gun
@DentSideDee71 got the best spray pattern I've ever seen and I've been painting for over 40 years.
Qual o nome.da pistola
Окей
Watching a painter who knows how to lay down paint the right way is super satisfying. 😃👍
... I mean He's not telling himself that he's a robot out loud...I dunno how right he can be.
Yo Pause 😂😂😂😂😂
Tak się nie robi przecież... lakiernicy tak nie malują.Pierwsza warstwa ma być na 20%.
Como se llama la pistola
Maybe you should show that video to this guy. Must be a first timer
The atomization and coverage is incredible. It’s perfect
no its actually not....its too much paint and his spray pattern is all over the board, just because it looks satisfying with coverage and the speed hes doing it at doesn't mean its right, I bet you any money after he applied the next coat he got a couple of runs with the gun adjusted like that, also he failed to do the edges and angular surfaces first, and yes i have painted and done bodywork before
@@cloakedgthis distances definitely werent even, but I'm just a RUclips couch painter 😊
Pretty sure he’s using debeer 500. That stuff covers in one coat in most cases
@@cloakedgtyes but it's not gonna run that stuffs base it's gonna flash before the next coat no single stage here 😂 I own a bodyshop and I'm the painter 😅 iv been hearing great things about this line too very tempted to give it a try. I know axalta has some water born stuff that covered in one coat and you could really hammer it on and it just stuck like glue 😂 think 3xs the thickness on a coat compared to the old solvent from way back wild the first time I shot it. But it's also water so wet beds and long dry times or lots of bakes make it kinda suck. This is solvent from what I understand but very similar to water in how it shoots and it kinda lays itself down from what I understand
@@oliverscorsim oh ok i get it, if it were me id still spray it lightly make sure it gets coated nice and slowly I'm just very precautious because re sanding it just makes it a nightmare 😂 and it doesnt hurt to be, i did single stage metallic my first time the only run was on the rear bumper where there was an edge and a corner, so you can only see it like really up close, its more of a drip the size of a teardrop but, its just a delicate process, mistakes are annoying to deal with
I've never seen a light on a paintgun; it is a great idea. You can never have enough light when painting a car.
Hell yeah I'm 71 and still painting but sometimes I'm doing it blind and it still comes out dammmm good.
Light is 'brilliant' idea, will see if I can modify something similar.
Light on a spray gun? An extra article to clean after painting expressly after all the overspray that is on it bad enough cleaning the spray gun itself now you have a light to contend with.. I'd rather paint in a well lit shop or outside..
@@peterrivney552 I would just use a plastic cover like a screen protector for a phone cheap and no clean up necessary
@@splender88 Exactly, we can still use common sense😂
@@pieterbezuidenhout2741most paint supply stores, where you’re getting your materials. They should have them in stock. Two of my local stores have them in stock.
I love watching a seasoned painter! They can make it look so effortless!
It looks really hard😂
That looked crazy good. I haven't done body work in years but the gun, light and spray finish are amazing.
Love the blue paint and the light on the paintgun
You don't know if he laid it on right for a few minutes, it'll run later if he laid down too much overlap.
It’s basecoat
Been trying to find that blue paint to fix my pickup and yah...its now discontinued. Thanks dealership!!! F_cked again by the dealer.
@@paulreiser9179Pas forcément. Si c'est une peinture acrylique ça brille direct et pas besoin de vernis. Cette peinture est très pratique pour les petites surfaces car elle sèche rapidement.
Love that color!!
Being a painter theirs nothing more satisfying then getting it right
Man that exquisite!!! Beautiful color and awesome technique 💪🏻💪🏻🤘🏻🤘🏻🫡
Assassin with a spray gun. Phenomenal! Love it!
Yay.. finally someone that knows how to paint
Finally someone else that is the GOAT at there job too!! Nice !!
LIKE A BOSS!! With Absolutely no overspray on the light! 😅
Es ist eine Nebelarme Spritzpistole.
I love that color of blue!
Nice choice for the sealer and the base coat covered beautifully on the first coat. A lot of people don’t use the right color sealer and it makes all the difference in the world when it comes to being good at color matching.
Always tint your sealer!
Value shade
White is superior.
Makes every color pop.
@@hotrodray6802some people don’t want too much of a pop, so the next color that isn’t black would be a grey tint
If its a colour match repair you need to go by manufacturer specs or it will be a different shade
Wow 👀 that feels so satisfying. Imagine doing it yourself the satisfying feeling of a great job well done final product Exelente 💪💯🏁
Wow. The coverage of this is impressive, especially at the speed your moving.
It looks as if your guns on max and just flooding it on because it’s covering so well. 👌🏻👌🏻
That's how I've done it
Drives watchers crazy.
High Volume/ Low Air Pressure System .......Needs more Lighting on the Walls of the Booth, Though then you can use Normal Spray Gun without a Torch....LoL
WOW! This is a painter and a master of his craft. I been around a lot of automotive painters in my time and he's the best I have seen. I would have hired this guy in a minute and tried really hard to keep him on the payroll! I had my motorcycle paint in a blue metallic very similar to this one. Yes my favorite color is blue and this is beautiful. Keep up the good work man. Have a nice day.
That's impressive level of skill and coverage. Nice work 👏
Wow
Beautiful work!
Minimum paint
Very nice gun and experience
This does a good job of showing how important it is to have good lighting in a spray booth. An extra light is a cool idea, but it really shows how marginal this particular spray booth is lit.
❤❤❤❤ I really like that paint gun that has a light on it back in the day I remember I used to paint outside just so I could get good sunlight
One of the absolute best automotive painters I've ever witnessed online, and probably in person too.
Awesome work! Best gun and Painter
This was the best thing I watched all day.
I love the blue. Having a light on the guy really helps
Now this is professional work ❤
Приятно смотреть на работу профессионала !
Сперва прокрашиваются мёртвые зоны а после лицо
Да, круто конечно. Но когда смотрю такие ролики, начинаю представлять сколько работы было проделано до покраски. Такие мастера на вес золота, которые идеально могут сделать.
Boy that prep work is impeccable
Obviously not this guy's first rodeo! Probably more like his thousandth! Everything about this video, from the color, to the tools used, to the application technique, to the viewing satisfaction, is perfect!
Rumor says he started by applying spray tan to bikini models at age 13. Apparently he was *very* motivated.
Skill and experience right there folks.. excellent work brother
Needless to say the conditions are perfect downdraft booth good air pressure and nice paint gun
That rich after just one coat is amazing!!! Love that color and love that gun!!!!!!
Какой пистолет использует маляр?
+- charged body, paint
Nothing more satisfying than a fresh paint job
Gorgeous Blue... Love This Color And the Result... Beautiful Job... 😅😅😅
Man this guy is a artist i love how confident and steady he spray paint.. very rare guy to find
Man I love the idea of a light on the spray gun.. totally stealing this idea. Genius move there.
When you first started i thought it looked like it was going on a bit heavy, but the speed you was moving was appropriate for the amount of paint coming out.
Nice colour too.
yeah this guy seems like he really knows what he's doing, it's refreshing for once lol
Agree at first I was skeptical cause how close he was, but the speed he was going at was perfect leaving no time for over spray and the flicks were great.
Tacticalizing spray paint gun, that spray is on point, nice technique 👌
Would love to know which paint gun is being utilized
I think it's an exodus spray gun
Looks like an iwata
Luma 3... it says it right on the gun do you not see it in the video
That's the light, dude @@avenger2.099
The pressure is perfect Mike to come out the gun with great coverage
People think its just the gun but its psi & how its mixed & what is mixed that makes a painter!
If he was using anything else he would have runs everywhere on that car. That’s not how you paint a car. You don’t just start anywhere. The equipment and paint saved his ass.
Now that's a real professional paint sprayer there I would love to have him paint a few of my cars.
Nice & Blue! I like it! 😉
Damn that must be so satisfying when you finish and look at your good work
Like watching someone pressure washing. Hypnotic!😊
Truly blows my mind how many people can't and care less to even try.
I have painted plenty in my life, and must say, this is really a great gun.
I dig the flashlight 🔦 on the paint gun. Very nice 😊
Хороший факел,плотно ложит,а что за фирма???
EXODUS 397 баксов ,фонарь это доп
@@dupontrostov☝️ а фонарь?
@@dupontrostov- Exodus pro, с фоарем, со скидкой $690
@@scotchdog sunpro насадка светодиодная 244 бакса,в общем американская компания lumattt
@@scotchdog фонарь 244 бакса ,фирма luma3 штат канзас
Bro got top notch equipment and mixture setup to perfection making his work 1 2 3
Pintor bom com bom equipamento é outra história.
Что это за краскапульт? Факел как надо бьёт
What is the color??? I love it!
Делитант видео сразу!
Движение рук и понимание как ложиться краска ноль.
Хорошие , современное оборудование дала возможность проходимцам снимать ролики!
You are correct sir I was thinking the exact same thing.
😅да точно..., нужно было по-феншую - оклеть газетой, дунуть в гараже с песочком...
Снежку ему в пулик зарядить нужно, чтоб класс показал... Ничего с этими фонарями не видно
That coverage in a pearl with one coat is insane. Surely checking this stuff out.
What color blue is it beautiful work 👏🏻
Ford jean blue
Yessir! 👏 hitting them corners first thats whats up
Exodus spray gun looks like it does very well with atomization. What is the line pressure at the gun with your basecoat?
Just for the sound alone he is at 40 PSI+
That was oddly soothing and satisfying
What type of paint gun (with flashlight) are you using? Can I get a link?
Luma III EXODUS
What PSI anybody got an idea
@@chrishill8527You can bet it's lower than 40psi
That looks so satisfying
Gorgeous gun and paint!!!
Videos like these makes me wish i never left paint. Im in charge of calibrations and all mechanical related problems these days, and this really makes me miss the booth.
What color is that. I really like it
Man that's covering like a million bucks, what a time saver. Dam I'm glad I watched this. learning don't got no end, learn till the day I'm gone lol 🤓
Laying it down like a machine. Ain't no robot gettin this human's job.
Its a blue galaxy ❤❤❤
What a nice color!!!
На работу профессионалов можно смотреть вечно.
Какие точные движения, быстрота, качество.... Много чего можно перечислять.
What kind of gun you using? Works well.
It looks more easy as it is...😊
But this amount of paint... not possible with a normal spray gun... colour will run down imediantly... nice work!
Exactly
Краскопульт прикольно хороший, орошим пуликом и дурак сможет покрасить. Но автор респект он не дурак, знает какие движения и когда делать. Красиво респект 👍👍
Угу
Так там уже все на автомате.я уверен он и без света ее покрасит так же
That looks real good, bro👍
Peaks and valleys like a pro! Nice work
wow interesting colors and the paint gun is ready with the lights.....solid
Nice colour..
Цвет фигня, намного красивее его робота и этот девайс. А подготовка под покраску? У этого парня золотые руки.
BEAST!!!!!!! THIS GUY IS A MASTER
皆さん、塗装は簡単で私にも出来そうって思われてる方もいるでしょうが、ここまでが大変だし重要なんです！
Raccontaci allora la difficoltà…
Ça va ... ce n'est pas non plus si difficile de bien peindre.
C'est même plutôt facile comparé à d'autres travails.
@@Nico76555 il parle en terme de technique.
Je pense effectivement comme lui.
Il y a plusieurs couches à mettre dont le vernis.
Tout doit être fait rapidement pour que les différentes couches se superposent mais s’unissent aussi.
Ne pas faire de coulures, de sur / sous épaisseurs, de traces etc.
C’est un métier.
Et je ne parle même pas de toutes les étapes d’avant qui sont encore plus techniques ( carrosserie en général ) car ce n’est pas le sujet.
C’est pas le le truc le plus technique du monde c’est sur mais c’est pas à la portée du premier venu que de faire une peinture parfaite comme un pro.
Al contrario, tirar la pintura es la parte fácil, lo difícil es toda la preparación previa...
Yap bener sekali, ini sangat sempurna
Nice job! I repainted my 56VW bug, orange peel comes to mind lol
What brand ia the spray gun
Luma III Exodus.
I think it’s called a Luma LUMA3 look it up and see if it looks the same buddy. Good luck to you man. I’m trying to find out everything I can about it too because he spread the hell out of this car and it looks like he has three coats on the first coat so he’s definitely a pro
Luma III Exodus, which is also sold as the Meiji Finer Core.
@batman9512 thanks for replying .god bless
Luma 3 EXODUS
Looks super satisfying....great job!😂😂😂😂😂😂😂😂
I never see people who spay properly and wonder why they’re paint has to be sanded so much. Why are you spraying 2” from the work space? Just because you spray fast doesn’t mean you did a quality job.
He’s actually 4-6in away
That's only the first coat
The light is only giving him daylight look
I love that blue Jean blue that Ford came out with❤😂😂😂
Great workmanship beautiful color
Bro i love you, this was insane
Wow I love that colour bro what a job well good 👍
Love this color. Reminds me of my 2005 Trailblazer LS. lol 😆
I like the magnetized paint and paint booths much easier to get a good result, every time
As many stated, seeing it done right is a beautiful thing.
Nice color and prep!
I know nothing about painting but this looks super impressive and well done 😬
No hay desperdicio de pintura...
Hoo eso es fantástico
Who taught you to spray porcelain?
Beautiful, man.
That’s actually really genius….all those years I was spraying blind at some angles 🤦🏼♂️
That blue looks good with a black base curious as to what it would do with grey or even white behind it
wow that first spray made my jaw drop, if it looks that good fresh it must look so nice once its all dried
Absolutely beautiful😮
I have sprayed both. i will take the debeers over ppg all day long. But if you like the wet on wet application I HIGHLY recommend Spies Hecker. I get coverage in a 1 1/2 coats no need to go back in for a metallic orientation coat. 1 1/2 coat of base dry it with air and boom your clearing
from the first pull on the trigger I was like YO WTF is that!! beast coverage!
Looks great have a great AutoBodyExperience
Nice like Just a perfect amount of frosting on that cake.
Real talk, what happens if you mess up? Do you let it dry up and then sand it and re do the part or wash it off since its still fresh?
Primeira alternativa
Absolute quality 👌🏻