Working in an electronics factory in the late 80's the latest equipment they had was an automatic insertion machine (through hole standard components). Was in an acoustic enclosure and you needed to wear hearing protection it was so loud!
In the factory's heart, where circuits align, SatisFactory Process unfolds a design. An inside look at precision's dance, In SIM-ready routers, where manufacturing enchants. Circuit boards emerge, in the solder's embrace, A poetic journey in the manufacturing race. Precision's ballet, where components align, In the SatisFactory Process, where excellence shines. From microprocessors' whispers to connections tight, An inside look at the manufacturing flight. SIM-ready routers, in the technological sea, A poetic exploration, where precision is key. Soldering iron's touch in the factory's ballet, SatisFactory Process unveils the way. Circuitry's dance in the manufacturing hymn, A poetic revelation, where technologies swim. Components placed with meticulous care, In the SIM-ready routers, where signals share. An inside look at precision's song, In the manufacturing process, where excellence throngs. So let the circuits hum, in the manufacturing rhyme, In the SatisFactory Process, where precision climbs. An inside look at the technological dream, In SIM-ready routers, where precision gleams.
He forgot the leds at 6:05. also Your pcbs have uneven copper coating because of possibly rushed electroplating shown at 8:09.(Although it's apparently a ground plane and should be fine.)
Quite an interesting video. These are the good paying tech jobs the country should invest in and teach for the upcoming tech workers and visionaries. And maybe bring this back here in the USA? Maybe...stay tuned.
Lulz, these are not good paying jobs in the least. This is just typical factory line operator work, you can take anyone off the streets who wants to do that work and teach the job in a day or so. Thing is, it's bloody mind numbing to insert the same damn connector in the same damn PCB over and over again ad nauseum. Nobody really wants to do that work in developed countries, never mind for the peanuts it pays. Now developing and building the machinery to do the work instead of the operators, that's more developed nation work. But for that you have to know a thing or two and have some actual skills.
Было бы интересно посмотреть как они делают антенны, проверяют параметры SMA to I-PEX MHF и согласованность канала. А вообще кайф, хорошее производство, у всех браслетики антистатики, есть спец одежда, на заводе не грязно, загледенье.
Actually, they probably have extraction in the building in general not just there quite often when the extraction is just by soldering the workers push it away and don’t use it unfortunately
This video is to show the people who know what’s going on who want to buy these? Unfortunately they don’t really care about people who don’t know what’s happening because they are not spending billions on their product.
Not always you probably wouldn’t be able to hear someone super easily and also it makes it quite annoying for people watching the video who do not understand the language
@ by fail to see how you have my technology but then believe in a God because we’re going to thank God for this technology while ignoring the fact that this technology has been around since the 60s and 70s but became more mainstream in the 80s it is nothing new or special. In fact I made one of these machines at home for about £400 very cost-effective and adult that advanced
Это не термопаста а силиконовый теплопроводящий клей, и наносится он именно таким слоем. По цвету и размеру тюбика я определяю его, как Kingboxer DX-458-W.
The wire roll holders are not safe being that are pointed to you, rod ends are not bent sufficiently and some dont even have a rubber boot at the edge (still no use), use holders on side ways
@@SABBIRIMON it would be also very cost saving to not use people to assemble leds rather make them solder on the machines, i mean last time when i bought 100 pieces of 3mm leds it costed me like a dollar and something but when i bought smd leds it was 50 cents
@@lavacat720 you’re forgetting the cost of an injection moulded piece to make the light pipe that would be required that cost about $100,000 for the mould in China. Labour is a lot less than that.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Amazing! I wish there was a show that would follow process of setting up of these factories, so interesting to know how they do it all.
Very nice 👍
Thank you 🙏 please upload more technological video
Amazing process!
Très intéressant 👍👍
Remarkable how quiet those machines are.
Working in an electronics factory in the late 80's the latest equipment they had was an automatic insertion machine (through hole standard components). Was in an acoustic enclosure and you needed to wear hearing protection it was so loud!
And rusty machine parts too! Anyone who has watched well knows what I mean.
Perfect
7:59 finally a program that they are using is made in India .. 🎉
5:18 easy and clear to show the difference
From Brasil 🇧🇷🌎
Ok
wow 😍✔
Great... I impressed after Watching this.
Exactly what I just commented! 👍
In the factory's heart, where circuits align,
SatisFactory Process unfolds a design.
An inside look at precision's dance,
In SIM-ready routers, where manufacturing enchants.
Circuit boards emerge, in the solder's embrace,
A poetic journey in the manufacturing race.
Precision's ballet, where components align,
In the SatisFactory Process, where excellence shines.
From microprocessors' whispers to connections tight,
An inside look at the manufacturing flight.
SIM-ready routers, in the technological sea,
A poetic exploration, where precision is key.
Soldering iron's touch in the factory's ballet,
SatisFactory Process unveils the way.
Circuitry's dance in the manufacturing hymn,
A poetic revelation, where technologies swim.
Components placed with meticulous care,
In the SIM-ready routers, where signals share.
An inside look at precision's song,
In the manufacturing process, where excellence throngs.
So let the circuits hum, in the manufacturing rhyme,
In the SatisFactory Process, where precision climbs.
An inside look at the technological dream,
In SIM-ready routers, where precision gleams.
Feeling creative - arent we ? 👍
nice chatgpt going on there!
So you telling me people are that lazy and let ChatGPT do the creative job for them ?🤦♂
We doomed ... @@jerimy604
He forgot the leds at 6:05. also Your pcbs have uneven copper coating because of possibly rushed electroplating shown at 8:09.(Although it's apparently a ground plane and should be fine.)
I think a second worker places the buttom LEDS.
8:09 That was cleaning mark of flux for few of those big solder point.
confidently wrong. imagine putting all this work into shit pcbs.
Quite an interesting video.
These are the good paying tech jobs the country should invest in and teach for the upcoming tech workers and visionaries.
And maybe bring this back here in the USA?
Maybe...stay tuned.
Lulz, these are not good paying jobs in the least. This is just typical factory line operator work, you can take anyone off the streets who wants to do that work and teach the job in a day or so. Thing is, it's bloody mind numbing to insert the same damn connector in the same damn PCB over and over again ad nauseum. Nobody really wants to do that work in developed countries, never mind for the peanuts it pays.
Now developing and building the machinery to do the work instead of the operators, that's more developed nation work. But for that you have to know a thing or two and have some actual skills.
Very Nice Programming 👌
Congratulation's 💚👌
Goodness i a lot of job..😊
Было бы интересно посмотреть как они делают антенны, проверяют параметры SMA to I-PEX MHF и согласованность канала. А вообще кайф, хорошее производство, у всех браслетики антистатики, есть спец одежда, на заводе не грязно, загледенье.
وفوق كل ذي علم عليم لو اسلمتم لكان خيركم وصلاحكم اكثر للبشرية
Shut up
You're a cult
Best djob
5:32 果然到了插件还是得上人工 😊
Good
This is my dream
I love it good 👍
Super
Top
very powerful router!!
Very well filmed. The soldering iron job could use some extractor/ppe. Worker safety matters.
No they dont in that country
Actually, they probably have extraction in the building in general not just there quite often when the extraction is just by soldering the workers push it away and don’t use it unfortunately
so cool.
It will be more attractive if you explain the processes.
This video is to show the people who know what’s going on who want to buy these? Unfortunately they don’t really care about people who don’t know what’s happening because they are not spending billions on their product.
@UKsystemsWe know nothing when we are born. Thanks.
the work is done in quiet silence ..this is our life. to succeed, do your work quietly
Not always you probably wouldn’t be able to hear someone super easily and also it makes it quite annoying for people watching the video who do not understand the language
Rất tuyệt vời dây chuyền sản xuất thiết bị phát sóng 5g xin cảm ơn đã chia sẻ với khán giả
All the beauty, but how is it that working in a factory, showing up with shorts and flip-flops, really an introduction to disaster like injuries
Unfortunately in China most workers don’t care about their safety to the point that is a factory enforces it they will not have any workers
❤❤❤❤❤
Quá giỏi
Steam engine style oilers still in use at 11:05, nice.
Technology producing technology!
You've got to admit, it's all very impressive?
There is a God ......this knowledge machinery & technology is impossible to man
It’s impossible to man yet here you see people making it and using it
@UKsystems yes........and truly amazing that God has given man this knowledge
@ by fail to see how you have my technology but then believe in a God because we’re going to thank God for this technology while ignoring the fact that this technology has been around since the 60s and 70s but became more mainstream in the 80s it is nothing new or special. In fact I made one of these machines at home for about £400 very cost-effective and adult that advanced
@UKsystems maybe you do not understand my compliment of how great this technology is........
Really ? It is indeed commendable
رائع رائع رائع... كم سعر هذا المصنع
Around 60 Million usd 😢
how do they make the software inside this hardware ?
ICs with memory were preprogramed before solder on.
nice
10:37 The wi-fi tester has the most fun job testing with RUclips videos playback. :)
Щедро термопасты намазал.
Это не термопаста а силиконовый теплопроводящий клей, и наносится он именно таким слоем.
По цвету и размеру тюбика я определяю его, как Kingboxer DX-458-W.
@@aqfj5zy Оганесяна ?
Sou fascinado em eletrônica
hep böyle bir fabrikada çalışmak istemişimdir
Cel two panel box two cpu moniter hd two and two and two conection pkg working soft disc scan card ( total 10 wire punchings)
buatan wifinya bagus
the workers dont know which cable belong to which frequency, but the cover have print 2.4/5G
this technology is the best if I can bring to my country.
👍👍👍👍
بين الدقة وعلوم الروبوتيك ترتقي صناعة الإكتونيك
А ничё так складненько, усердно нарот йабашит.👍⚒️⚙️🛠️
Great job 👏
5:30 Az a rozsdás adapter csodálatos! :D
I think it's because of the heat...
👍🏻👍🏻👍🏻👍🏻
is it 5g ready and openline?
What company are these p&p machines ?
The wire roll holders are not safe being that are pointed to you, rod ends are not bent sufficiently and some dont even have a rubber boot at the edge (still no use), use holders on side ways
Espectacular !!
❤❤
Make a video About Hand free Making
Good video. What kind of epoxy UV resine have the PCB board?
Rarienny Ferreira de Silva Av Goiás n 306 centro cachoeira Dourada Goias
Máy gắn linh kiện Hàn Quốc thua xa máy của Nhật Bản 😮
lik this md habib bai
كم سعر هذه الالات او المصنع
Edson dos Reis Vasco Silva cachoeira Dourada Goias
super automatic process
Where is the address of this factory?
❤❤❤❤❤😊
❤️❤️❤️
How many antennas you want
Yes
Carlos Júnior Silva Av Goiás n 306 centro cachoeira Dourada Goias
Awesome !
love it!
I want job in this factory
Ezeni dos Reis Vasco Silva Av Goiás n 306 centro cachoeira Dourada Goias
Please how may I join you.
Why not switch to SMD leds instead of DIP leds on those other motherboards?
Cost savings
@@SABBIRIMON it would be also very cost saving to not use people to assemble leds rather make them solder on the machines, i mean last time when i bought 100 pieces of 3mm leds it costed me like a dollar and something but when i bought smd leds it was 50 cents
It is far off to the top over, if use SMD LED the light will mix or cross over to each other.
@@jxmai7687 Then modify the design i have a router that uses smd leds and has no crossover issues with its leds
@@lavacat720 you’re forgetting the cost of an injection moulded piece to make the light pipe that would be required that cost about $100,000 for the mould in China. Labour is a lot less than that.
我想参观您的办公室
❤❤❤❤😎😎😎😎
Oh God how many antennas do we deed? 😂
А у девчонки-то браслет, чтобы не убежала
5:04
amazing tech savvy
貼片的關鍵永遠都是零件的品質，大廠和二線廠牌，品質天差地別
Taiwan is a country I love Taiwan ❤
What is that the technicians are wearing in there hand like a wired bracelet
It's antistatic wrist strap.
мне интеретно а бывают ошибки ? Оператор напутал и все платы в брак. это очень дорого
where are they glovers?
❤
Balto Silva Balto armando Silva Cachoeira Dourada Goiás
Je suis intéressé pour le travail
Hi
Wander Sameul Silva Ana Keila Silva Lídia Reis Silva cachoeira Dourada Goias
👍✌️👏🙏👏👏👍👍👍
The mac barcode comes out as a set of chromeshelves and the s/n comes out as a makeup bag. Weird.
?? please tell me more
slippers worker 0:51
Thaisa Reis Thalita Reis Uberlândia MG
Quisiera trabajar ay ensamblando cosas
আমার একটা দরকার