@@Robbyrevz I was replacing my wheel bearing assembly in the passenger rear on my b8 Avant and I had to unbolt and disconnect the control arm and everything around it. Once I got the new wheel bearing in, the spring jumped out lol and I’ve been having hella problems trying to get it all together lol
hey man, is there any CEL or suspension notif in the dash? did your stock shock absorber came with a sensor (adaptive dampening suspension).. thanks man
Looking to buy a set today but not sure what spring rates to go with. I'm going with the extreme lows and swift springs. Was thinking 14k front and 6k rear. Any advice? Would greatly appreciate it man! I'm on 18x10.5+22 on my b8.5
If anyone is in LA and has a b9 a4, I have some brand new coilovers from BCracing that have never been used. $750 obo. Never had a chance to throw them on the car before it was totaled:/
thank you! I have coiler overs, not lowering springs. And I suggest you got with BC Racing coilovers. But specifically go with the extreme low kit and you'll be good.
Hey what’s up bro. Yes I can fit a soda can underneath haha. My tears can still go lower but the front is maxed out. What Coilovers are you thinking of getting?
i set it to the softest setting which is turned all the way to the left from what i remember. Also yes you can adjust it by turning the little pin in the middle of the assembly. Kind of looks like the top of a screw
About 3 inches lower. Ride is good. Definitely have to compromise comfort being this low when you go over bumpy roads and dips. But feels smooth on good roads
Hey what’s up! I believe you’ll be ok. I’m running 19 x 10 and it tucks my wheels in comfortably when slammed. The gti seems like the same width as my car so I think so
Dj Phat Tony no I didn’t have too. Doesn’t rub with it on. For some reason only when I make a full u turn it rubs in the inner side of the well. Other than that nothing. Had to pull me rear fenders tho
$995 plus tax. www.ecstuning.com/b-bc-racing-parts/bc-br-rn-b8-a4-s4-a5-s5-fwd-awd-09-16/s-07-br~bcr/?gclid=CjwKCAjwqdn1BRBREiwAEbZcRzelWVOH9y2Hpl7zMOgJXpY2oef_cxYpp7lh6VCyiS4NnfWMsbXyJxoCc6kQAvD_BwE
I have the reg ones and throw 19s on it , u said they reg one don’t go that low on our b8s? How sure or u bro cuz then I’ll just return em and get the extreme lows if that’s the case
So I have a 2015 Audi A4 I put in a ECS coilover kit I just want to ask of anyone here has used this coilover kit for an Audi A4 and if you have run into noise problems once the coilovers have been installed I'm currently dealing with this problem on top of ecs giving me defective front sway bar links and are being difficult about it especially after talking to multiple customer service reps and just dealing with crappy service
@@Robbyrevz this comment is old af but what tire size are you running? That's my ideal spec and I already have like new pilot sports in 255/35 on my stock wheels that I might transfer over if there's enough clearance
Yes, here. Make sure it’s the extreme lows www.ecstuning.com/b-bc-racing-parts/br-series-coilover-suspension-kit-extreme-low/s-07e-br~bcr/?gclid=Cj0KCQjwm9yJBhDTARIsABKIcGYN7TQ65bdqdApKiGu8H2tJZl6l9sop1HTgRUoDg7sp6JUoXPyHYBUaAhuwEALw_wcB
Hopefully this helps! www.ecstuning.com/b-genuine-volkswagen-audi-parts/upper-control-arm-bolt-priced-each/n10491802/?gclid=Cj0KCQjwk4yGBhDQARIsACGfAevua9wjD_3Dfw_cIqcI4kEjUfy--8gco9KXZQFMGuT4MrOn_3l5z2kaAqsBEALw_wcB
Glad be apart of this bro . Anytime you need a hand I’m just a phone call away . Your welcome brother 🙏🏼
likewise man. It was a great experience. 🙏🏼
this man has camera skills like he been vloggin for 5 years
Colby Cason hahah I’ll take that! Lol thanks
LEO is the teacher. Price is a little bit high but looks like its worth it!
Haha sure was!
hello sir,does the car crash that low? you are happy with the post?
Glad I found your channel bro I need to fix what I screwed up🤣🤦♂️
What happened??
@@Robbyrevz I was replacing my wheel bearing assembly in the passenger rear on my b8 Avant and I had to unbolt and disconnect the control arm and everything around it. Once I got the new wheel bearing in, the spring jumped out lol and I’ve been having hella problems trying to get it all together lol
Nice vid ! Dope edits
Thank you!
I see that you bottomed out on the lowering adjustment. I did the same thing but not getting low like yours, did you adjust the loading?
Yes I adjusted the preload beforehand. Maybe you didn't get the extreme low version of the coils?
hey man, is there any CEL or suspension notif in the dash? did your stock shock absorber came with a sensor (adaptive dampening suspension).. thanks man
Is this an install video or a Reality TV show?
Haha both! Reality install show. 😂
Looking to buy a set today but not sure what spring rates to go with. I'm going with the extreme lows and swift springs. Was thinking 14k front and 6k rear. Any advice? Would greatly appreciate it man! I'm on 18x10.5+22 on my b8.5
If anyone is in LA and has a b9 a4, I have some brand new coilovers from BCracing that have never been used. $750 obo. Never had a chance to throw them on the car before it was totaled:/
wouldnt fit a b8 would it ? i have a 2013 a4 if u can message me on instagram my @@ is zavi._
Clean 🧼 would you give a some advice looking to lower same as yours did you have to do any adjustments besides just putting on the lowering springs
thank you! I have coiler overs, not lowering springs. And I suggest you got with BC Racing coilovers. But specifically go with the extreme low kit and you'll be good.
How much space do you have underside skirt? Can you fit a can under it does it scrape on speed bumps? I want to lower mines too
Hey what’s up bro. Yes I can fit a soda can underneath haha. My tears can still go lower but the front is maxed out. What Coilovers are you thinking of getting?
@@Robbyrevz the same ones you got BC race coil overs extreme lows
@@Robbyrevz so your front is all the way down and the rear is on what setting?
What size were the wheels?
These would work on a 2015 Audi A5 right?
Anthony yes it will!
@@Robbyrevz thank you bro appreciate it, love your build btw keep at it 💪🏼💯
Your preload is correct? Asking because I need to set mine properly
Yeah it was already set from last time I had the Coilovers on.
@@Robbyrevz those 4mm like bc recommended?
What dampening setting did you set it to? Is there anyway to adjust it without taking out the whole coilover?
i set it to the softest setting which is turned all the way to the left from what i remember. Also yes you can adjust it by turning the little pin in the middle of the assembly. Kind of looks like the top of a screw
@@Robbyrevz so you can adjust the dampening another way besides the top knob? Is it easy to get to?
Bro you got a toe out on both rears. Best get that checked. ✅
yeah i got an alignment after i did the install. had too, haha
Part number of that important bolt?
I have a a4 b8.5, should be the same?
Sorry I don’t have the part #. But it’s the bolt that screws threw the upper camber arms.
How low did you get it and how's the ride
About 3 inches lower. Ride is good. Definitely have to compromise comfort being this low when you go over bumpy roads and dips. But feels smooth on good roads
Robbyrevz I guess I'ma keep mine 1inch lower I need my ride smooth
Yeah that’ll be good. Low profile tires will also play some discomfort
This shit funny😂 keep it up, you got my sub
thank you!!
@robbyrevz How many upper control arm bolts do I need to order? Is it just two for the front? Or do I need 2 for the rear as well? Thanks man.
I might be late but its just for the fronts im pretty sure.
But im not a 100% sure so try to check elsewhere for clarification but im pretty sure thats how it is
Yo I am running 18x9.5 5x112 I drive GTI 2015 u think I’ll be fine if I get extreme low coils
Hey what’s up! I believe you’ll be ok. I’m running 19 x 10 and it tucks my wheels in comfortably when slammed. The gti seems like the same width as my car so I think so
11:29 dab cough confirmed
You don’t take out the round metal piece it keeps it’s centered
Rad bro . 🤘🏼🤘🏼🤘🏼 is it white claw time lol
Haha after May 15th!! White claw party ASAP
How did you get yours this low. I got the same car and coilovers but mine didn’t go as low
Edwin Zaragoza do you have the “extreme low” kit?
Robbyrevz yea I got the extreme low. Did you remove any collars
Edwin Zaragoza no I didn’t. Just that silver round piece that was attached to the front top hat. Hmm I wonder why yours don’t go as low
Did you have to remove the wheel well , like the plastic so it doesn’t rub ?
Dj Phat Tony no I didn’t have too. Doesn’t rub with it on. For some reason only when I make a full u turn it rubs in the inner side of the well. Other than that nothing. Had to pull me rear fenders tho
Hey bro thanks for the prayers
of course!
how much were the coilers? and possibly a link?
$995 plus tax.
www.ecstuning.com/b-bc-racing-parts/bc-br-rn-b8-a4-s4-a5-s5-fwd-awd-09-16/s-07-br~bcr/?gclid=CjwKCAjwqdn1BRBREiwAEbZcRzelWVOH9y2Hpl7zMOgJXpY2oef_cxYpp7lh6VCyiS4NnfWMsbXyJxoCc6kQAvD_BwE
Don’t BCs come put together?
They do but this video is when I re installed it so some parts where separated
@@Robbyrevz did you need camber arms?
Bro got the same car. Mine smokes a bit in the engine sometimes is that normal
What do you mean in the engine?
Or do you mean smokes out the tail pipes?
Like where the vents are on top of the engine, smoke was coming out after I turned my car off. Wasn’t even pulling that hard only going like 60
Are these Coilovers extreme lows or just the regular ones
Extreme lows!
I have the reg ones and throw 19s on it , u said they reg one don’t go that low on our b8s? How sure or u bro cuz then I’ll just return em and get the extreme lows if that’s the case
@@mandoelorryann4171 yeah, you need the extreme lows to go as low as mine. return em while you can!
@@Robbyrevz you tried the the regular one before or how do you know ?
@@mandoelorryann4171 I specificall ordered the Extreme lows. It gives you the option if you want regular or extreme low before you check out
What size wheels
19x10 +35 all around
Did you need to do spacers or anything extra i want to lower my stock A4
miles gaither no spacers for this set up. Just make sure you get the “extreme low” kit from BC if you wanna ride this height
How are these coilovers so far?
good! no complaints! of course sacrificed ride comfortability with how low i dropped it but its still good. have dampening adjustment too
@@Robbyrevz I just ordered mine yesterday!
What wheels are on your a4?
Rotiform SPF
Can u please help me & tell me what that rubber piece is called @11:18
Phil N not sure what it’s exactly called but it’s the rubber boot that goes on top of the top hat
Sorry I mean on top of the spring and under the top hat
now i wanna do it😭
do it!!
Run me those wheels and specs homie 👀🤣 plz 🙏😩
What size rims?
Nate Spears 19x10
How many inches are you rims
They’re 19 in
So I have a 2015 Audi A4 I put in a ECS coilover kit I just want to ask of anyone here has used this coilover kit for an Audi A4 and if you have run into noise problems once the coilovers have been installed I'm currently dealing with this problem on top of ecs giving me defective front sway bar links and are being difficult about it especially after talking to multiple customer service reps and just dealing with crappy service
ive never used ECS coilovers. how did this situation end up going?
What’re the specs on the wheels?
they're 19x10 +35 squared
@@Robbyrevz this comment is old af but what tire size are you running? That's my ideal spec and I already have like new pilot sports in 255/35 on my stock wheels that I might transfer over if there's enough clearance
18:30 lmaooo!!!!
Vitak777 7 🤭😂
Can u send me online site that I can order same coilovers thanks in advance.
Yes, here. Make sure it’s the extreme lows www.ecstuning.com/b-bc-racing-parts/br-series-coilover-suspension-kit-extreme-low/s-07e-br~bcr/?gclid=Cj0KCQjwm9yJBhDTARIsABKIcGYN7TQ65bdqdApKiGu8H2tJZl6l9sop1HTgRUoDg7sp6JUoXPyHYBUaAhuwEALw_wcB
🔥
thanks for the love bro!
Wheels size?
Gera Mane 19x10 +35
@@Robbyrevz nice! Are you from Nor Cal
Gera Mane naw from Socal! Haha been up there many times though
Pass link to the bolt 😔May be way too late
Hopefully this helps!
www.ecstuning.com/b-genuine-volkswagen-audi-parts/upper-control-arm-bolt-priced-each/n10491802/?gclid=Cj0KCQjwk4yGBhDQARIsACGfAevua9wjD_3Dfw_cIqcI4kEjUfy--8gco9KXZQFMGuT4MrOn_3l5z2kaAqsBEALw_wcB
Hey can u come CT and install mine? Lol I don't know how u got ur so low I must have did something wrong
blankit06 hey what’s up! Are you from LA? What Coilovers do you have?
Those are for the rear lmfao 🤣
fmlllll lol