I'd like to correct something. That frame is not a felt frame, just a nirve frame. I thought they were also called that, so, oops. Oh well. They do look like steel felt frames regardless, pretty similar style.
eh. I've been burning the rdm plate by clutch slipping hard for longer times, which is not ideal I know, but oh well. I'm sure it's warped now or something.
@@trentbikes i got worried the other day I went from 46t to 32t and increased my compression as well. The clutch started slipping bad but all it needed was the flower nut tightened a few turns lol.
15:45 they got pull start adapters for motorized bikes. Just pull the clutch in and pull then give some throttle while you get on. Release the clutch when ready to go while giving throttle.
well that's what signals are for, but even then some don't signal, so yeah you're right. but eh, if it happens it happens at least I'll be at peace lol
@TrentBikes heck yeah man that bike is sweet!! If I could, I would be hitting 75+ on my little bullshit bike berry /hyper bike all while I’m going on and off the sidewalk. Keep it up man great content 🤙👍
Bro I did 33 max on a 66cc bicycle and felt like i was ripping. This dudes nuts 🤣🤣 his build definitely supports what he was going for 10/10 just whatever you do dont pop the clutch without revving high enough to match and make sure your chain is always good and not too stretched out. Made those mistakes and the wheel back wheel locked while going 28 mph i skidded like a whole block.
a motorized bicycle is cheap. $100-150 bicycle engine kit on amazon/ebay (get the two piece cylinders, so you can replace/upgrade head, easier porting etc), and an used bicycle on facebook or craigslist.
@@mrbing70 all stock bicycle engines perform pretty much about the same (except the phantom 85, menace 85), heck maybe even the avenger 85. Don't waste $300 on a kit. Just get an avenger 85 kit for $200 if you want a more reliable but still kinda fast out of box engine (like 40mph+ depending on gearing). Either way one of those $100-150 kits on ebay/amazon will do.
It's not so much as how fast. As it's about the possibility of what one can do if they choose. It's interesting to see exactly what all can be done if you choose to do. And there's a certain group that races motorized bicycles on a track. So this is also interesting. Excellent work and explaining.
Congratulations on the New Bike and build! I really like the bike You picked up! I want to get a steel frame bike like that one myself. Your builds are always really awesome! You keep getting better and better with every build. You might want to try some Tank sealer for your tank. I have to coat 2 of mine last week with tank sealer. It takes a while to do but well worth it! 💯 Just make sure all your welding is done before you seal the tank. It fixed all the pin holes no problem. I am using a 1 gallon 4 oz.tanks and I made all new brackets for it that fit the frame perfect and bolt on very easy. End of tank issues. Is that Your Athena Motor You have in this bike? Keep up the great work my friend and stay safe out there.👍🏁
It’s all fun till someone goin the same way as you don’t see you doin 70 down the shoulder/bike lane in a 40ish mph zone and thinks “oh snap my turn” and makes a right and you smash into him. I’m glad you put a disclaimer in the beginning cause this is just reckless. I use to be all about speed till I got my bell rung and now I just enjoy getting there every time without all the pain of hitting and falling.
@@trentbikes I really can't imagine that kind of speed on something not really built for it. Mine will do 35. More of an Enduro bike setup. Fast Enough. Torque to go Anywhere ( almost) in any conditions. And didn't cost an arm and an ass to build. So far maybe 500 in it after 4 years.
👍 That's exactly what I did to my new tank before mounting....Sanded the paint around the 4 studs and reinforced them with JB weld...Used 2 coats & smeared it up on the threads a ways....The more the better as long as it doesn't interfere with mounting the tank.... No problems since 2020.... I also bought a plastic shut off valve from hardware store in lawn & garden section & I use it instead of wearing out the stock petcock tank valve.
You should look into 2 stroke motor scooters. The older 100cc and 250cc Vespas go 75mph. If you get ahold of one of the Dual-cylinder motor scooters, you can get CRAZY speeds.
@@trentbikes lol. For sure. BTW, have you considered a 212 bike? Even a basic one is capable of close to 70mph. Or are you a true die-hard 2stroke enthusiastic (respect either way).
I have always wanted to find a frame similar to this, that is pretty solid steel, then cut it apart for the components I want, and making a small but beefy framed bike similarly shaped, adding front and rear downhill mountain bike suspension for big jumps, standard profile tires with a hybrid on/off road tread, and a 2 speed gear setup like the in hub style gears, and the chain jackshaft kit that transmits my engine power into the pedal system for gear reduction when I want take off and hill climb, then a high end gear for once I'm up to speed to get higher top end while remaining in the power band.
Brother that's screaming fast that's my dreamful limit actually 65 .actually I don't dream,all I have to say is your A1 golden .may peace and love always be with you bro
Those wheels are sic ! I am going to build me a bike after the holidays are over with and i am going to probably need your help and advice on things so you should be hearing from me in couple of months so be prepared for me to bug the shit out of you for help hahahaha !!!
@@trentbikes well it was when you when porting and matching the transfers and busted thru. Watching that save me a headache when I matched mine I did the case and minimal on the cylinder. Thank you for the response! I know it wasn't direct advice but your video was a great guidline on what to expect. I am at the point now tho where I realize the avenger is a very flawed amateur motor lol
@@mikecyanide7492 Oh, yeah. Did you read somewhere saying that 12k is too much? I think avenger crank bottom conrod bearings and piston can handle 12k rpm. maybe not.
@@trentbikes first hand I'd show ya pics if I could but it buried the ring retaining pin into the cylinder wall. With a 3mm deep trench lol it's their most major design flaws. The husqvarna piston,in a husqvarna saw the piston never goes low enough to reach the intake roof. It can be corrected somewhat with an ms460 phantom style piston but those put the the pins in the transfer roofs lol. I learn the hard way with an almost 70mph pull lol
This is very similar to what I want to build....A strong reinforced motorized bicycle that can SAFELY cruise at 45-55mph using moped or motorcycle tires...But that looks like a regular slow motorized bicycle....I'd also like to use a 750w front ebike hub motor for a hybrid. So I can switch to 100% legal fwd ebike in certain areas....That way I could cruise 45-55mph on the back roads 15 miles to my closet town of 30,000. Without it having to be an all day ride....I'm not sure how much chain drag or hub drag I'd have when using either gas or electric, is one issue to consider. A 2 stroke in N would have lots of chain drag. I'm pretty sure they have hub drive motors. That don't create drag when pedaling only.
Yeah I like steel felt/nirve frames like these. Very sturdy. I want a real steel felt fat tire (second generation) frame, those are the best from what I was told.
there is NO such thing as riding Safely at 45mph on a bicycle.You newbies need to keep your fantasies to yourself. What you said above makes zero sense. Your gonna get hurt real bad if you somehow manage to build what you say you fanaticize about.
@@refuge33 😂People ride electric bikes /electric cycles all the time at 45-65 mph....Go watch videos of motorized bicycles racing at the track. Some electric 🛴 scooters go 75mph ... I've rode motorcycles for 30 years before riding motorized bicycles ..When I say 45 55mph I'm not talking about a regular bicycle. It's basically a small motorcycle with pedals. Many scooters 🛵 go 45 mph...Look up old minareill & puch Magnum modified scooters.
@@refuge33 😂 I've been riding & working on motorcycles for 30+ years.... I'm not talking about a regular bicycle going 45- 55 mph. If you know how to weld & do metal fabrication & work on cars/motorcycles, you can build things 😂 Many electric high power cycles u can buy go 45-55 mph...A guy on RUclips built a diy 100 mph ebike. Which actually is unsafe because he was using a regular bicycle frame, wheels, tires,etc...
@@michaelbrinks8089 Alright Bro, I also raced motocross and had over 19 motorcycles and built and sold 46+ motorized bikes and got pictures to prove it, including my first motorized Schwinn custom chopper at age 14. It would seem that you'd get of cheaper and get more enjoyment from a 125-250cc enduro or even better, a Motard. My current one is a 2007 250r Ninja Cafe Racer and she can hit 105mph in 6th @ 14,500rpm. You gotta be there to understand~grin~
im going thru some of the same problems you are i just sealed my gas tank waiting for it to cure 4 days will be done monday wish i could post videos but phone is junk and have no camera good video though and nice ride!
@trentbikes Hey what are you running for oil and your engines 40:1 synthetic? I had a guy last week.Tell me it needs to be 25:1 What's the truth. I've looked all over the internet and nobody says 25:1
What's your thought the mineralli from gorilla gas bike? I need a strong enough engine to take me to school and back it's about 60 miles altogether speed limit out here traveling to another town is 50
You can get the same cylinder kit but without gaskets (make your own with $7 gasket paper on amazon) for $50 on californiamotorbikes. However, a complete engine kit, for $190 on gorillagasbikes, that doesn't seem like a bad deal. Comes with a carb. But not pipe as far as I can see. They are plenty powerful and can easily turn like 10k or so rpm. So I don't see why not. Never heard of the site tho
You should def stick to those back roads bud where it’s open and no cars and no bike lane where you are just in the lane of traffic but no cars. It hurts like hell falling at 50, I can only imagine how much it hurts at 70. Stay safe bud but I don’t think that’s your motive lol.
Man. Thats crazy. Going 70mph on a diy bike. I didnt know this hobby would be pricey, even for diy. Can u give me top 3 basic mods to increase speed? Im new to this.
@Flexpecs all engines have a powerband. 2 strokes have a peaky powerband where when you hit it at a certain rpm it takes off fast and make peak power, because of resonance in the pipe (look it up). 4 strokes just have a pretty flat powerband
It to much centrifugal force to move the jackshaft and all with one of these motors . It’s easier to do what he’s doin with a small gear. You get more speed with this setup then a shack shaft cause so much power get eaten up by the gears.
Have ou tried putting in race gas? Like q16, x85, ignite 90, methanol, 110, or t2. They make more power than pump gas, t2 is a 2 stroke blend from vp and banshees that drag race use it
What tires do you use for these setups? The Speeds you can reach sounds like they exceed anything you can find in bicycle sizes. Also, just an idea, but some footpegs on the rear axle would be a nice perch for your feed on speed runs.
Awsome video. Question about your stihl pumper carb. I put my pulse port in the middle of crankcase below carb according to a Guage it's pulsing 25lb push and pull but I can't get carb to work. I tried a vacuum fuel pump and it will pump gas. I've adjusted popoff pressure in carb to 12lb but still won't run. Junk carb it's a real tillitson hl324. Any guess?
Can we get a video of all your upgrades on the motor? Im not trying to hit 70mph by any means,im shooting to be able to cruise at 45mph and maybe 55mph top speed,i can get to 40 mph now but powerband stops around 30mph,or could u make a video or comment back what to do or upgrade to be able to easily cruise 45mph without stressing the motor out, PLEASE REPy
This is madness!!! But i love it. I want to motorize my mountain bike turn it into some sort of dirt bike but i want to put a rack as well so i can transport my stuff for my business. The only question i have is if its possible to have one that has good power but reliable? Something that i dont have to worry about falling apart every time i ride.
I'd like to correct something. That frame is not a felt frame, just a nirve frame. I thought they were also called that, so, oops. Oh well. They do look like steel felt frames regardless, pretty similar style.
@@trentbikes Hi, I got the same bike but all red with matching fenders. Pretty sure it's completely original even with the nerve BadA$& tires.
How about fitting NOS bottle? A little extra burst of speed for y'all. Stay safe my man....
@BenDover-tn6vx nah
good work at the gym my motorized bike daddy lookin good
@trentbikes What CDI Box and what carburetor do you use?
Those clutch pads are holding on for dear life 😂
eh. I've been burning the rdm plate by clutch slipping hard for longer times, which is not ideal I know, but oh well. I'm sure it's warped now or something.
@@trentbikes i got worried the other day I went from 46t to 32t and increased my compression as well. The clutch started slipping bad but all it needed was the flower nut tightened a few turns lol.
@@matthewpeter4034lol I feel ya bur your clutch and his clutch have absolutely nothing in common
Be careful we are watching you and need your blogs homie!!!!!
Omg that was so funny with the forks upside down, nice...
Dude... If I was lightweight like you... Drop out needs to be modified; proceeds to modify it over the carpet. Priceless. Thanks for sharing.
lol
The Smoking Loon with Geminis and ThickSlicks goes amazing Trent! Finally a safe great looking bike. Thanks for uploading❤
Now I need to make it look cleaner!
With u for the whole journey 💯
It's a bicycle you can take on the interstate. You know, if you're a little deranged.
Definitely keeping up with some 125 CC bikes.
Yeah, somethings always breaking down and I have to go back home and fix it. Pipe cracking/loosening, engine issues, and more.
@@JLock_17 your not keeping up with 12s your completely outrunning them
15:45 they got pull start adapters for motorized bikes. Just pull the clutch in and pull then give some throttle while you get on. Release the clutch when ready to go while giving throttle.
Safety glasses with grinder is a must.
safety squints are better
@@qs8787 agreed
Yo you crazy riding in that bike lane up on them cars like that one of those car decided to make a right turn you a goner 😮
well that's what signals are for, but even then some don't signal, so yeah you're right. but eh, if it happens it happens at least I'll be at peace lol
What kind of engine is that. where did you get it?
@TrentBikes heck yeah man that bike is sweet!! If I could, I would be hitting 75+ on my little bullshit bike berry /hyper bike all while I’m going on and off the sidewalk. Keep it up man great content 🤙👍
bro you are so underated
It’s so fast!😮 watching from Philippines 🇵🇭
Bro I did 33 max on a 66cc bicycle and felt like i was ripping. This dudes nuts 🤣🤣 his build definitely supports what he was going for 10/10 just whatever you do dont pop the clutch without revving high enough to match and make sure your chain is always good and not too stretched out. Made those mistakes and the wheel back wheel locked while going 28 mph i skidded like a whole block.
wow this thing is nuts bro! nice work G
I don't have a motorized bicycle but was running around the yard with the lawnmower screaming Trent Bikes. Wish I had one of these or a Grom
lol
a motorized bicycle is cheap. $100-150 bicycle engine kit on amazon/ebay (get the two piece cylinders, so you can replace/upgrade head, easier porting etc), and an used bicycle on facebook or craigslist.
Thinking about getting BT100 version 2 and Walmart Cranbrook or old school 80s/90s mountain bike
@@mrbing70 all stock bicycle engines perform pretty much about the same (except the phantom 85, menace 85), heck maybe even the avenger 85. Don't waste $300 on a kit. Just get an avenger 85 kit for $200 if you want a more reliable but still kinda fast out of box engine (like 40mph+ depending on gearing). Either way one of those $100-150 kits on ebay/amazon will do.
Thanks trent. You're the best! Love this channel
Damn thats one hot bike! Stay safe out there dude ❤️
It's not so much as how fast. As it's about the possibility of what one can do if they choose. It's interesting to see exactly what all can be done if you choose to do. And there's a certain group that races motorized bicycles on a track. So this is also interesting. Excellent work and explaining.
6:38 Hit me like a brick that did
Congratulations on the New Bike and build! I really like the bike You picked up! I want to get a steel frame bike like that one myself. Your builds are always really awesome! You keep getting better and better with every build. You might want to try some Tank sealer for your tank. I have to coat 2 of mine last week with tank sealer. It takes a while to do but well worth it! 💯 Just make sure all your welding is done before you seal the tank. It fixed all the pin holes no problem. I am using a 1 gallon 4 oz.tanks and I made all new brackets for it that fit the frame perfect and bolt on very easy. End of tank issues. Is that Your Athena Motor You have in this bike? Keep up the great work my friend and stay safe out there.👍🏁
Congratulations on 73 if you could lay down like these people I see on RUclips I think you'd hit your 75 if not faster ride safe brother
@@mikemiller3303 I hit 76 on my old bike
just saw this, I hit 76mph before this video on another video
It’s all fun till someone goin the same way as you don’t see you doin 70 down the shoulder/bike lane in a 40ish mph zone and thinks “oh snap my turn” and makes a right and you smash into him. I’m glad you put a disclaimer in the beginning cause this is just reckless. I use to be all about speed till I got my bell rung and now I just enjoy getting there every time without all the pain of hitting and falling.
@JMB676 it's not like I'm not slowing down when there's cars from the streets about to pull out into the roads im on. Im smarter than that.
This happened to me at 20mph think about 60 😂😂😂
If you're hitting 70 why be in the bikelane
Mt bike does 45+ I mix it up cause cars can be assholes also trying to race lol
Get his D out your mouth
It's nice having that speed. As long as you have decent torque to get out of the way. Good Brakes help,too. 2:35
haha yea
@@trentbikes I really can't imagine that kind of speed on something not really built for it. Mine will do 35. More of an Enduro bike setup. Fast Enough. Torque to go Anywhere ( almost) in any conditions. And didn't cost an arm and an ass to build. So far maybe 500 in it after 4 years.
Key to any bike build, coffee. Nice build.
Thanks!
@@phatmotocat it’s gotta be weed for me or I get too frustrated while working on bike/car
Always put fiberglass or epoxy weld on tank around the studs to prevent leaking.
👍 That's exactly what I did to my new tank before mounting....Sanded the paint around the 4 studs and reinforced them with JB weld...Used 2 coats & smeared it up on the threads a ways....The more the better as long as it doesn't interfere with mounting the tank.... No problems since 2020.... I also bought a plastic shut off valve from hardware store in lawn & garden section & I use it instead of wearing out the stock petcock tank valve.
You should look into 2 stroke motor scooters. The older 100cc and 250cc Vespas go 75mph. If you get ahold of one of the Dual-cylinder motor scooters, you can get CRAZY speeds.
Eh, this is a motorized bike channel, so I'd like to keep it to mbs only. Thanks for the suggestion
@@trentbikes lol. For sure. BTW, have you considered a 212 bike? Even a basic one is capable of close to 70mph. Or are you a true die-hard 2stroke enthusiastic (respect either way).
@a.m.bgarage.everydayprojec9665 I have a tilly 212 that I have yet to build. So yeah eventually. Just money money money.
When Trent uploads you know it’s a good day🫡
💯
I have always wanted to find a frame similar to this, that is pretty solid steel, then cut it apart for the components I want, and making a small but beefy framed bike similarly shaped, adding front and rear downhill mountain bike suspension for big jumps, standard profile tires with a hybrid on/off road tread, and a 2 speed gear setup like the in hub style gears, and the chain jackshaft kit that transmits my engine power into the pedal system for gear reduction when I want take off and hill climb, then a high end gear for once I'm up to speed to get higher top end while remaining in the power band.
You got balls of steel my man I'm afraid to take my Avenger over 40, maybe its my age Lol!
Dude is cooking!!!!! I just build a phantom. Only issue is brakes are crappy. Would love to have disc brakes .
upgrade to thsoe then
@@trentbikes old frame doesn’t have the mounting brackets. I’m looking into getting one with built
In tank
@@skate_health7319 you can upgrade the forks that uses brackets
@@trentbikes will look into that thx !
Brother that's screaming fast that's my dreamful limit actually 65 .actually I don't dream,all I have to say is your A1 golden .may peace and love always be with you bro
You're one crazy dude!
I'm gonna build mine like this. In fact in the state of Kansas i don't have to be licensed 100 percent legal in kansas
nice
Actually you do need a license for a motorized bicycle in all 50 states
@@catsbyondrepair I don't have one. Cops don't care.
Right on man you nailed all the motorized bicycle hacks awesome machine!!
haha thanks
great help. I've been watching all your videos! i just finished building my first 80cc bike today!!!!
welcome!
Try make a vid of pushing her to 14k 15k rpm. Idk how you would do it but it would make it a screamer and hell of power
Yeah I was working on that video. Deleted the whole folder by accident. Will try again with a new athena eventually
Man your bike is soo sick, I’d love to know your engine set up, I gotta make one like it!
it's just a 70cc athena sport hybrid engine
@ awesome,thank you for the reply!!
😂 this video is great, ridiculous quote “Like your asscheeks in jail” what the hell bro
lol
43 mph on my 4 stroke is insane can’t imagine going over 70 lol 😂
He's going hard!
Try using some type of rubber or something under your fuel tank to insulate the vibrations from cracking it
eh not rlly gonna work
@@trentbikes you tried it ?
Those wheels are sic ! I am going to build me a bike after the holidays are over with and i am going to probably need your help and advice on things so you should be hearing from me in couple of months so be prepared for me to bug the shit out of you for help hahahaha !!!
Your a nutcase. I dig your channel. Took your avenger advice... apparently 12k is too much for an avenger lol
@mikecyanide7492 what was the advice?
@@trentbikes well it was when you when porting and matching the transfers and busted thru. Watching that save me a headache when I matched mine I did the case and minimal on the cylinder. Thank you for the response! I know it wasn't direct advice but your video was a great guidline on what to expect. I am at the point now tho where I realize the avenger is a very flawed amateur motor lol
@@mikecyanide7492 Oh, yeah. Did you read somewhere saying that 12k is too much? I think avenger crank bottom conrod bearings and piston can handle 12k rpm. maybe not.
@@trentbikes first hand I'd show ya pics if I could but it buried the ring retaining pin into the cylinder wall. With a 3mm deep trench lol it's their most major design flaws. The husqvarna piston,in a husqvarna saw the piston never goes low enough to reach the intake roof. It can be corrected somewhat with an ms460 phantom style piston but those put the the pins in the transfer roofs lol. I learn the hard way with an almost 70mph pull lol
Nice looking bike
Thumbs up 👍on video nice build on bike coming from James , Michael Daniels
ty
after all that stuff breaking off u got a set of nuts hitting 70 again lol
lol
Tengo que decirte que te mereces mucho..son pocos los que arriesgan su vida así.. como haces para que no se sacuda ..
wdym shaking?
Fucking wild man, be safe and have fun
Whats the little 2 smokers cc? Thing shifts. Absolutely love 2 strokes!
It's a 80cc or 66cc in real terms. Good thing about 2 strokes it a small piston can make a he'll of power of you mod it
@@vladimirvladimirovichputin1352 No, it's a 70cc. Hybrid engine. Stock ports.
Straight up genius
Link or name for the engine? Also sick build really do love the frame.
This is very similar to what I want to build....A strong reinforced motorized bicycle that can SAFELY cruise at 45-55mph using moped or motorcycle tires...But that looks like a regular slow motorized bicycle....I'd also like to use a 750w front ebike hub motor for a hybrid. So I can switch to 100% legal fwd ebike in certain areas....That way I could cruise 45-55mph on the back roads 15 miles to my closet town of 30,000. Without it having to be an all day ride....I'm not sure how much chain drag or hub drag I'd have when using either gas or electric, is one issue to consider. A 2 stroke in N would have lots of chain drag. I'm pretty sure they have hub drive motors. That don't create drag when pedaling only.
Yeah I like steel felt/nirve frames like these. Very sturdy. I want a real steel felt fat tire (second generation) frame, those are the best from what I was told.
there is NO such thing as riding Safely at 45mph on a bicycle.You newbies need to keep your fantasies to yourself. What you said above makes zero sense. Your gonna get hurt real bad if you somehow manage to build what you say you fanaticize about.
@@refuge33 😂People ride electric bikes /electric cycles all the time at 45-65 mph....Go watch videos of motorized bicycles racing at the track. Some electric 🛴 scooters go 75mph ... I've rode motorcycles for 30 years before riding motorized bicycles ..When I say 45 55mph I'm not talking about a regular bicycle. It's basically a small motorcycle with pedals. Many scooters 🛵 go 45 mph...Look up old minareill & puch Magnum modified scooters.
@@refuge33 😂 I've been riding & working on motorcycles for 30+ years.... I'm not talking about a regular bicycle going 45- 55 mph. If you know how to weld & do metal fabrication & work on cars/motorcycles, you can build things 😂 Many electric high power cycles u can buy go 45-55 mph...A guy on RUclips built a diy 100 mph ebike. Which actually is unsafe because he was using a regular bicycle frame, wheels, tires,etc...
@@michaelbrinks8089 Alright Bro, I also raced motocross and had over 19 motorcycles and built and sold 46+ motorized bikes and got pictures to prove it, including my first motorized Schwinn custom chopper at age 14. It would seem that you'd get of cheaper and get more enjoyment from a 125-250cc enduro or even better, a Motard. My current one is a 2007 250r Ninja Cafe Racer and she can hit 105mph in 6th @ 14,500rpm. You gotta be there to understand~grin~
How did u make it that fast
A powerful engine..
Hell ya great speed, nice build you’re stepping up your game…
ty
What kind of engine and exhaust set up do you have again?
70cc athena sport hybrid and RMH minarelli pipe
We’re do you get that seat from?
Time for some lights on that thing..
I don't ride at night sooo
Im impressed man!!! What kind of engine is this and what other mods did you do to get such a wicked top speed
@@hollywoodaaron9766 70cc athena sport hybrid engine with rmh minarelli pipe and 20mm pumper carb
Insane U the motorized bicycle 👑
Lol ty
im going thru some of the same problems you are i just sealed my gas tank waiting for it to cure 4 days will be done monday wish i could post videos but phone is junk and have no camera good video though and nice ride!
upgrade to those 1 gallon gas tanks, they're only $30-40. totally worth it
Do you have any extra parts
you are crazy man lo cheers from brazil!
Man, you're amazing bro.How did you learn all that stuff and how long did it take you to get all those tools.. ❤
Research, help from others, asking questions, experiments, and more. As for tools, online or hardware stores. You'll buy what you need over time.
@trentbikes Hey what are you running for oil and your engines 40:1 synthetic?
I had a guy last week.Tell me it needs to be 25:1 What's the truth.
I've looked all over the internet and nobody says 25:1
Does it have good brakes ?
What's your thought the mineralli from gorilla gas bike? I need a strong enough engine to take me to school and back it's about 60 miles altogether speed limit out here traveling to another town is 50
You can get the same cylinder kit but without gaskets (make your own with $7 gasket paper on amazon) for $50 on californiamotorbikes.
However, a complete engine kit, for $190 on gorillagasbikes, that doesn't seem like a bad deal. Comes with a carb. But not pipe as far as I can see. They are plenty powerful and can easily turn like 10k or so rpm. So I don't see why not. Never heard of the site tho
bruh I recognized Spokane valley police car. i had to pause and rewind for a second! I live in cda.
haha
Can you tell me where you have purchased your brakes from? At what kind are they?
description, i explained it in the video
Sweet video! Hope you enjoy the wheels! 👍🔥
Yeah i like them, thanks
⭐⭐
I need help on throwing a 80cc motor bike motor on a pocket bike
You should def stick to those back roads bud where it’s open and no cars and no bike lane where you are just in the lane of traffic but no cars. It hurts like hell falling at 50, I can only imagine how much it hurts at 70. Stay safe bud but I don’t think that’s your motive lol.
Bro, you are a wild man!
thanks
Man. Thats crazy. Going 70mph on a diy bike.
I didnt know this hobby would be pricey, even for diy.
Can u give me top 3 basic mods to increase speed? Im new to this.
@@unmeaninglessly143 ruclips.net/video/SkX3zE5lqJg/видео.htmlsi=PM0KLA8735y0T2LB
What gearing are you using? Also any carb/jetting, exhaust, internal upgrades?
Edit: also which motor?
How are you needing it to jerk like that?Is that just from giving it more gas?Or does that thing gears?
What motor is that
I'm slipping the clutch to get into the powerband at 50mph+
@trentbikes
I didn't know they had power bands .
In bicycle motors holy crap!
I want one!!!!!!!!
@trentbikes I'm a newby.
Obviously. Lol
@Flexpecs all engines have a powerband. 2 strokes have a peaky powerband where when you hit it at a certain rpm it takes off fast and make peak power, because of resonance in the pipe (look it up). 4 strokes just have a pretty flat powerband
What crank are you rockin in that build?
Stock
what size is the rear sprocket?
36T for 60mph, 28T for 70mph+
I have a question ⁉️.. what motor did you use to achieve that speed ⁉️⁉️
Can you give me the Engine kit link?
It's a built hybrid engine. They don't sell 70cc athena sport hybrid engines as a kit.
Do you recommend Barry bike stage 4 engine?
@@jonny69420 I don't use the site. You can get a cheap one for $100-150 with about the same performance as the overpriced $300 ones.
@@trentbikes what website should I use to get a good performance engine?
@@trentbikes and what kind of sprocket should I use for the engine chain? For higher speeds
2:45 i never know bro thanks for sharing
Awesome!!!
Awesome....love it
Love you Trent
Gay
Holy hell that's fast!!! What did you do to the motor!?
just a 70cc athena sport hybrid engine with RMH minarelli pipe :) (and pumper carb). stock ports of course
What kind of motor do you have
70cc athena sport
He shows the speed test at @9:26 👍
im wondering if u could do 1 of those fast bikes with jack shaft kit it would been cool to see 6 gear bike like that
@@thewaffle3945 yea one day
It to much centrifugal force to move the jackshaft and all with one of these motors . It’s easier to do what he’s doin with a small gear. You get more speed with this setup then a shack shaft cause so much power get eaten up by the gears.
where to buy a 70cc Athena Sport hybrid bycicle engine? Please provide links.
build your own
Give the link for the Genius wheel set...
look up gemini bicycle products on google
UR ripping bro 👍👍 what engine is that?
70cc athena sport
Can I have details on the handle bars?
@@Lilprankstas theyre clip on handles.
Have ou tried putting in race gas? Like q16, x85, ignite 90, methanol, 110, or t2. They make more power than pump gas, t2 is a 2 stroke blend from vp and banshees that drag race use it
no
@@trentbikes would you consider trying it?
@@gabrielbanta5098 if i had money yes
What tires do you use for these setups? The Speeds you can reach sounds like they exceed anything you can find in bicycle sizes.
Also, just an idea, but some footpegs on the rear axle would be a nice perch for your feed on speed runs.
Yeah, got some pegs coming today. also thickslicks i think
I'm hoping bike tire companies will start making tires for ebikes that are tougher & made for higher speeds.
Awsome video. Question about your stihl pumper carb. I put my pulse port in the middle of crankcase below carb according to a Guage it's pulsing 25lb push and pull but I can't get carb to work. I tried a vacuum fuel pump and it will pump gas. I've adjusted popoff pressure in carb to 12lb but still won't run. Junk carb it's a real tillitson hl324. Any guess?
try choking the carb. it may not be feeding enough fuel, so adjust the screws to feed more fuel
@@trentbikes Tried choking. Tried mixture screws at 1 turn idle and 1 1/2 turns for high at 1/2 turn increments all the way 4 turns out.
@jimwoodrow1964 take apart of your carburetor and make sure nothing is ruptured or clogged.
what is that jolt when you are trying to go fast? you pulling in the clutch lever or the clutch slipping
@@brwed clutch slipping to go faster into the powerband at 50mph+
Can we get a video of all your upgrades on the motor? Im not trying to hit 70mph by any means,im shooting to be able to cruise at 45mph and maybe 55mph top speed,i can get to 40 mph now but powerband stops around 30mph,or could u make a video or comment back what to do or upgrade to be able to easily cruise 45mph without stressing the motor out, PLEASE REPy
its just a hybrid 70cc athena sport with RMH pipe given to me for free. and pumper carb.
"when i was driving to work a bicycle passed me in the bike lane. it must have been going about 65"
hahahaha
I always wonder about what drivers would say. And how it would look from the drivers FOV
This is madness!!! But i love it. I want to motorize my mountain bike turn it into some sort of dirt bike but i want to put a rack as well so i can transport my stuff for my business. The only question i have is if its possible to have one that has good power but reliable? Something that i dont have to worry about falling apart every time i ride.
I ride mine almost daily 20 miles with a yd100 motor it's really about how u build them tho build it right and I won't have problems
@@theLyzhendricks 20 miles is not bad at all!