Brand New Sculpfun S10 Laser Engraver Will Cut Anything You Throw at It! (Review and Test)
HTML-код
- Опубликовано: 2 июл 2024
- Sculpfun has produced another beast of an laser engraver! It is suitable for hobby and even for professional work as it is capable enough to run a small business with it! In this review I'll go over all those features in detail so you can decide whether or not to invest in one for yourself! I will also show you the difference a honeycomb board and air assist can make! In this video I will also announce winners for my two previous giveaways!
Get the Sculpfun S10 at the best price here:
Official store: shrsl.com/40y0h
or here: hobbylasercutters.com/go/scul...
Package with air assist: bit.ly/40er1Cx
Amazon: amzn.to/3aCieFK
Aliexpress: s.click.aliexpress.com/e/_AOIbCl
The technical review of this machine, where you can find test results of other laser engravers too:
hobbylasercutters.com/sculpfu...
Honeycomb Board: hobbylasercutters.com/go/scul...
Air assist pump: hobbylasercutters.com/go/scul...
Honeycomb holding pins used in this video: hobbylasercutters.com/wp-cont...
Air assist test on thick wood: • How Does Air Assist He...
I tested the machine with a standard wood engraving pattern (power scale, interval test and photo engraving), a focus distance test, and plywood and hardwood cutting test. I also measured the focus spot size by engraving a test pattern on anodized aluminium and used a microscope to measure the beam size.
On this website you can find comparisons with standardized tests made on 10+ laser engravers.
BUY THROUGH THESE LINKS
(Affiliate links, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you have even lower price!):
**************************************************************************
Sculpfun S10: hobbylasercutters.com/go/scul...
Use coupon code BG7cc6e3 to get it for 589$!) Valid only until end of June and for a limited number of orders!
Sculpfun S10 Upgrade Laser module: hobbylasercutters.com/go/scul...
Atomstack A10 Pro: hobbylasercutters.com/go/atom...
Use coupon code BG849641 (CN) BG7a07d3 (CZ) to get it for 569$!) Valid only until end of June and for a limited number of orders!
Sculpfun S9: hobbylasercutters.com/go/scul... (Get it for 269$ with this coupons: BGaa0121 (discount is valid for a limited number of orders!)
Amazon: amzn.to/3wajTsS
Aliexpress: s.click.aliexpress.com/e/_9z39Xg
Sculpfun rotary attachment: hobbylasercutters.com/go/scul...
Sculpfun Expansion kit: hobbylasercutters.com/go/scul...
I have tested both:
• Did I Make The Largest...
• Cylindrical Engraving ...
USE PROPER LASER SAFETY GLASSES (O.D 6+):
hobbylasercutters.com/go/best... (you only have two eyes!)
******************
The prices at Banggood INCLUDE CUSTOMS and IMPORT TAXES, so there are no additional costs when the machine arrives in your country! Choose Ocean Shipping, EU Priority Line, Priority Direct Mail or European Railway Direct Mail. These shipping methods have no import taxes and customs duties, because Banggood takes care of them in advance!
0:00 Intro
0:54 Giveaway winners
1:19 Sculpfun S10 features
1:45 Advantages of using Honeycomb and air assist
3:36 Optical power measuring
3:50 Plywood engraving test pattern
4:25 Anodized aluminium and measuring laser focus spot shape and size
5:33 Focus distance test
6:21 Plywood cutting test 3mm-10mm with and without air assist
7:16 Engraving and cutting hardwoods
7:29 Acrylic cutting test with and without air assist (3mm and 10mm thick)
8:34 Stainless steel engraving
8:57 Slate stone engraving
I hope you enjoyed this video.
And click that LIKE button! It helps a lot!
BUT DO NOT CLICK THIS - bit.ly/2BYOIoR
Subscribe for more and tell me in the comments what you like the most or what should I create next.
Follow me on Facebook and Instagram
/ jtmakesit
/ jt_makes_it
for spoilers on what I am currently working on, behind the scenes and other extras!
I get my music from here: bit.ly/2U8HISX
#sculpfun #laserengraver #sculpfuns10 
Хобби
Get the Sculpfun S10 at the best price here:
Official store: shrsl.com/40y0h
or here: hobbylasercutters.com/go/sculpfun-s10/
Use coupon code BG13f615 to get it for 379$!) Valid only until end of March and for a limited number of orders!
Package with air assist: bit.ly/40er1Cx (Coupon BG5f9081 for $459 until the end of March)
Amazon: amzn.to/3aCieFK
Aliexpress: s.click.aliexpress.com/e/_AOIbCl
(affiliate links, I earn a small commission at no extra cost to you)
Thanks for the detailed review, I would love to use it in near future.
Thanks for the video, JT!
thank you for review!, that is what I'm looking! Saludos desde México :)
Thank you. Very informative
Great work! Keep doing this kind of stuffs 🤝👏
Thanks!
Thank you for all of your very informative videos!
Please review the LUNYEE 80W laser module. It's very cheap and thus very interesting.
I bought it today! Can't wait to have it!
I got just the laser module cause I already have the old frame with its expansion.
Finally, a good video review!
Thanks! Have a lot of fun with it!
@@JTMakesIt have you tried with MDF? I'm interested about 6mm thick.
@@Matthewsnake Haven't tried it yet, but I think it could be doable using air assist.
Thanks you very much from France for your video and link for pins
Thanks for watching!
saludos desde Uruguay... compre una y todavía no la he armado siempre trabaje con las co2 esta es un desafió estaré en contacto si podemos entendernos gracias...
Thanks for all the super helpful info. I'm currently researching laser engravers to figure out which one would be best for my needs. Right now, Sculpfun S10 is at the top of my list but I was wondering if you would be interested in or could review the Longer Ray5 10w?
Hi, thanks for watching! But I am currently too busy to review all of the machines. Maybe in a few months
Are you planning to do a review of safety glasses? Would be good to how the different ones that have come with the machines also compare, or even against more expensive ones
I use these ones (OD6+)
s.click.aliexpress.com/e/_Ag04bO
They are better quality, have better protection class and I like orange color better, it is easier to see more details.
I don't have the equipment to test the performance. I can only say about the build quality and visibility.
Puedes traducir mi respuesta :)
Tienes que ver las propiedades del laser.
El del Sculpfun es de 445 nm (laser azul). Si buscas la gráfica de los colores cromáticos (círculo con colores) verás que el opuesto al color azul es el naranjo y no verde como el que viene con la Sculpfun.
Los 445 nm tienes que ver que las gafas cubran este rango. En las especificaciones o descripción de las gafas que venden lo indican. Ideal buscar unas que sean OD6+ porque el color es mas denso y protegen más.
@@namunos Correct! This is why I always recommend(and use) these glasses: s.click.aliexpress.com/e/_Ag04bO
First, thanks for the excellent review.
What comparison do you make between the two machines: Sculpfun S10 and Neje 3 Max A40640?
For the laser performance you can check my other video where I tested the Neje Master 2S Plus with the A40640 laser module. The Neje Max has just a biger frame.
nice video.. the air assist makes a great difference.. but there's still no end stops and thus ability to home the lazer..
The limit switches can be added manually with some tweaking. I might do a video on that topic.
Really nice review.
Are you going to make a review of the atomstack x20? Looks promising.
Thanks! If I get my hands on it I will.
@@JTMakesIt And the new Ortur LU2-10A 10W module plz :)
I went with the Atomstack A10 instead of this one cause of the offline capabilities and the safety features.... Is there anyway to control this machines with something other than a pc? A raspberry pi for example?
You should check if Raspberry Pi can run Lightburn. The offline mode on the A10 is great for making a series production, but when making one-off project I always find myself fiddling a lot with settings, making small tests and doing this offline is very difficult. It is also much easier to precisely position the engraving while being on PC. Maybe it could run on a small Windows tablet or a mini PC. I wanted to by one from Banggood for a long time. They are pretty cheap.
Has anyone been able to test the new Sculpfun S30 pro max, does it compare well with the Xtool D1 as it also has a 4x6W Diode Laser ? The price is really interesting (the compressor is included) and it also has accessories like rotary and extension kit up to 905*935. Do you think the extended axis will not vibrate too much?
If anyone can help, I would be forever grateful.
Please , do continue these amazing videos. Thanks.
Your timing is spot on :) subscribe and wait a few days for the S30 Pro Max video 🤫 maybe I even manage to release it tomorrow
Hello I had a question. Where can I order or obtain that little cylindrical shaft for focus height of the laser head before engraving projects are started. Thank you made in advance.
You get it with the machine
budget doesnt really matter( I just cant afford a glowforge), I want to make door signs, and mostly acrylic earrings, I am torn between the x tool D1 and this one. Tell me what to buy
If you want more speed and precision then xTool(if you plan to engrave a lot of very small text), but for half the price the S10 is also very good. Check the video description for discount coupons.
I seem to have a different result than you for air assist. It seems the higher air assist, the less deep it can cut. (Atomstack A5 Pro+) any reason for this?
I think it heavily depends on the type of wood. Hardwood did better without air assist for me, but Poplar plywood did much better with air assist. I think it has something to do with charring of the wood.
Hi,
Thanks for the review. I have purchased Sculpfun S10 after your detailed review and I am very new to laser engraving machine. I have tried to cut the given plywood thickness of 5mm along with the machine but in vain, I cant able to make it. Speed 5mm/s, Max Power 100% and no air assist. Could you suggest me what is wrong and how can I sort it out. Thanks.
With your settings it should cut it in a few passes. Did you focus the laser properly?
@@JTMakesIt , Thanks for the reply. Yes I have set the focus according to your video by using the given 50mm cylinder rod. After almost 8 passes, it cuts. Is that right or anything you feel fishy in it.
@@karthikprabu5632 it can be normal. The number of passes heavily depends on how dense the wood is. I test on Poplar plywood which is very soft and the easiest to cut. Dense and strong plywoods would take more than twice the passes for cutting. Try lowering the laser head 2.5mm so the focus will be in the middle of the material. It should cut a bit better.
Many thanks for the support. Keep posting more videos and it is always delightful to watch your videos with excellent editing and to be precise to the point. Thanks again.
Hi JT, would you recommend the Sculpfun S10 over the Atomstack A10?
Yes. More easy to use. But it does not have limit switches. It depends on your needs
Can you please explain what are these limit switches? How do they help? I’m really new on the topic and I wish to buy my first laser engraving tool. Sculpfun s10 looks good, but how can these “limit switches” impact me?
@@aj2188 check my review of the Ortur Laser Master 2 Pro where I explained the function of limit switches:
ruclips.net/video/PYeYLyFWAdg/видео.html
Hi @JT Makes I really need your help. I Went to your Webpage but still can´t figure out Which one is the Best (Precision/Cutting) between this Pool of options due my Geo and budget:
Any Atomstack, Sculpfun10 and with really effort and afraid to not have access to parts the xTool D1. Thank and i hope you see that message
XTool is the most precise with best mechanics, the Sculpfun S9 is great for very detailed engravings because if small laser beam, S10 is great for cuttingand engraving, also the Atomstack A10, but I find it more tricky to use due to the laser head being so close to the material.
@@JTMakesIt Thank you very much my friend, your channel is the best so far,
Which one would you recommend over the other xtool d1 (10 watt) or Sculpfun s10?
It depends on what you want to do and what is your budget.
Man I've been stuck between xtool d1 10 watt and the S10. Seems like xtool d1 has a southerly better consistency of lines. But s10 is set up for limit switch upgrades.
Which one would you recommend?
Then check my newest video for the xTool D1 Pro 20W (it can also be 10W) it also has limit switches. But it is more expensive than Sculpfun. Both are great machines in their price range. It depends on your budget and what you want to do with it.
@@JTMakesIt It's a bit out of my budget, it's my first engraver. Just bought d1 10 watt a few minutes ago. Hopefully I'll be able to soldier limit switches on it and later upgrade the diode laser to 20watt.
I'll definitely check the video out! Btw thank you so much for making these vids, it's thanks to you that I picked d1. (The zoom on the refined detailed lines).
@@Ekztabar great, I am sure it will serve you well. You can still home the D1 even without limit switches because it has smart motor drivers
Hi I can’t get mine to cut 6mm never mind 9. What are the settings
What material? Some materials cut better and some don't cut at all
Please make video about Laserpecker LX1 😂
The S9 seems to create a more gentle burn on the edges when cutting solid wood. Do you agree?
I agree.
Hello, I am looking for a laser machine capable of engraving on stainless steel jewelry. Would you recommend this model for that job?
This is good, or maybe consider this one: ruclips.net/video/clK4vajlSAc/видео.html
My S9 is wavy AF for lines.
Would S10 really improved this issue ?
Yes. Bad rollers can cause wavy lines. But you can also replace the rollers
SIR,HELP ME..
I want buy,but which one is better?
sculpfun s10 or ortur master 2 pro?
Sculpfun s10
Can the machine do granite tombstone portrait engraving?
Yes. I made a tombstone in this video
ruclips.net/video/FLEVAfh_hDY/видео.html
S10 bring everything? or i need to buy air assist apart?
Air assist pump and honeycomb are sold separately. Check the video description
Hi
How many db does the air pump emit?
Thanks
I don't know the number, but it is quieter then the fan on the laser head.
@@JTMakesIt Ok thanks.
Btw with your phone you can download one app (tool) which measures decibels.
Maybe when you use your machine you can give us that information thanks again
Im looking to buy this Sculpfun S30 Pro 10W Laser module to upgrade my Neje N40630 module, does anyone know if its possible to mount in on the Neje Master 2S frame? Since you have tested both machines and modules do you know if the mounting is possible?
You would need to do some tinkering to mount it on Neje. It does not fit directly. It is completely different style of mounting system.
@@JTMakesIt maybe I'm better off getting the Neje A40640 10W? In term of compatibility is straight on but performance I'm convinced that Sculpfun is better
@@TheRealRoGueMS yes, Sculpfun is better. Check the store from my link in description for sculpfun S10 upgrade kit. It comes with an adapter, but I am not sure it works with Neje
@@JTMakesIt yeah I saw it already the plate has 2 holes further apart and 2 holes.close together maybe it does work.. if not I'll 3D print one xD
@@JTMakesIt as far as weight goes is something that you can check for me? I can't find anywhere the actual laser module weight
what about jeans engraving with air assist?
Haven't tried with air assist but in this video I engraved jeans without it: ruclips.net/video/ntNtiiy6L3I/видео.html
@@JTMakesIt will try with s10 hopefully without burnouts 😎
@@Fex8880040 you can always reduce power so it doesn't burn through
Can this cut .5mm silver
None of the diode lasers can effectively cut metal
What laptop do you need to run this lazer engraver
If it can run windows, then it can run Lightburn or LaserGRBL. Lightburn also works on different OS versions.
Thank-you for your reply
Which one is value for money? S9 vs S10
S9 is great value, but the S10 in much better for cutting. It depends on what you need. If you need a lot of cutting, the S10 is better.
Thanks a lot!
Hi, let me tell you that I am no computerexpert, I can reed my emails, download files from the internet and scan things and file them . My question is, will my knowledge be enough to work with this laser
You should be able to learn to use it with some usual trial and error of course
vs NEJE 80W (12W optical output) ?
You can check my review of the Neje master 2S plus. It has the A40640 laser module.
Hello, I'm new, this or ortur lm3?
This is better bang for the buck
@@JTMakesIt I think so. I think the max Pro comes with a pump too. Cheaper, and that's 20w
I need a laser to cut a 20mm white glass acrylic, this one can cut up to 15mm, but can you cut 1 side 15mm and turn the piece to cut the other side for a 30mm in total thickness?
Thank you.
None of the diode based lasers can cut transparent or white materials, unless very thin (under 1mm) due to the physics, because they work with visible light that goes through transparent materials. You would need a CO2 laser which works with infrared light.
@@JTMakesIt could you please recommend me one for beginners, I just need to cut 20mm thick glass acrylic
Thank you for your response.
@@bablutu For cutting 20mm thick acrylic you need at least 80W CO2 laser:
s.click.aliexpress.com/e/_A1ntVP
I don't know how easy are they to control, since I have no experience with CO2 lasers yet. I think they are a bit more complicated to use than diode lasers I use.
@@JTMakesIt thank you man you saved me a lot.
Hallo hiii',plss try to cut clear arcylic plss
You can not cut clear acrylic with any diode laser
@@JTMakesIt hmmm alright tq so much,,or got any trick to cut?
@@limitkazuyaofficial you can cut very thin acrylic (0.5mm) if you paint it black with a temporary paint. But more or less you can only engrave it this way.
Diode lasers struggle with everything transparent or white.
the file on your site is for s9, not s 10
I have updated the download page. If you visit the downlaod page link you got in your email again, and click the green download button, you will download the updated version which I use for 10W machines.
@@JTMakesIt thank you very much. Greetings from Poland
sorry forgot my name , it is Teuntje from the Netherlands ( age 70)
Hi, do you have an answer on my question, I iid send a question about a hour ago
I do not use these machines ,i do not have the skills to work with software ,i am getting on in age BUT i do build laser cut kits AND this machine cuts great edges ,normally i see them them NOT vertical,even on very expensive kits.
👉👉👉👉I've actually been following your channel for some time, you have very good content, please continue with your good videos.
A great weekend!
👆👆👆👆👆👆👆💯
Thanks! You are awesome!
Please don't use robo-voice... ugh! No matter how bad you think your voice is... it's better than robo...
Want to take a bet? 😁
@@JTMakesIt Don't be afraid to be yourself! You'll get more comfortable as you do it more.
Gift me one sculpfun 10