If you find this machine interesting, you can get it through this links: Official store: shrsl.com/45klk Or here: bit.ly/3JdGoEe (package with air assist pump!) or here: hobbylasercutters.com/go/sculpfun-s9/ Use my coupon "BGdedaba" and get it for only 189$! Or here: www.geekbuying.com/go/727rAkdN Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l (Affiliate link, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you can have even lower prices with my coupons!) If you want to upgrade your existing laser check the replacement laser head only: hobbylasercutters.com/go/sculpfun-s9-head/ Air assist also available!
Tip, if you poly, or poly stain your wood first, then laser etch and cut, you are able to remove the burn halos using alcohol and a cloth... It's also easier to brush poly the entire wood before it's cut or etched. Then you can still use the spray after the cleanup for a final coat...
That sounds like a good tip. Do you have a recomendation for the type of poly to use? I've just ordered the S9 and really looking forward to start using it.
I’d recommend water based Polyurethane (Ie: polycrilic) because it doesn’t yellow like oil based. Just make sure you stir and don’t shake because you will introduce a ton of micro bubbles in the finish. I also don’t like foam brushes for the same reason.
If you find this machine interesting, you can get it through this links: Official store: shrsl.com/40y0d Or here: bit.ly/3JdGoEe (package with air assist pump!) Or here: hobbylasercutters.com/go/sculpfun-s9/ Or here: www.geekbuying.com/go/727rAkdN Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l (Affiliate link, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you can have even lower prices with my coupons!) If you want to upgrade your existing laser check the replacement laser head only: hobbylasercutters.com/go/sculpfun-s9-head/ Air assist also available!
You don't need spraypaint to engrave into Stainless Steel, but it does help sometimes. I've found certain stainless engraves really well without paint, while others don't- I think thickness and exact composition of the metal is what makes the difference.
I watched multiple videos MULTIPLE saying in order to engrave metal I needed brake cleaner, a certain type of paint, etc. I spent over $100.00 on different substances and discovered all I had to do was use masking tape and turn the laser up as high as I dare. I etched multiple wedding cake knives with the date of the wedding, their names and a cutting board with "Welcome to our Kitchen Established" and the dtes.
@@JTMakesIt Ha Ha Ha I haven't heard of that, but imagine the trouble one went through to get to that level of research "C'mon man, I promised them I'd be done by noon. We can't go to lunch until we get this finished." they say you can indict a Ham Sandwich, well, maybe we can laser engrave with one, or parts of it." Ha!
@@diegoibanez7549 You can engrave transparent acrylic and glass, but you need to paint the surface black with a spray paint or water colors. After engraving you clean off the paint. Look at this video on how to engrave glass: ruclips.net/video/FLEVAfh_hDY/видео.html
@@theenduror can do glass if you paint it black for engraving purposes. Watch my video of 5 unusual materials that can be engraved with diode laser. But it can't engrave copper.
you can help me choose which one I have to buy laser engraver that engraves and is more precise, I don't care about the cut but the engraving between which to choose ATOMSTACK S10 PRO 50W or Atomstack X7 Pro 50W or laser SCULPFUN S10 thanks
Is this better than the s30 pro? Is this brand better than neje? I currently got my first laser and I got the neje 3plus but having trouble with it. Thinking of switching to another. Any recommendations?
This is the predecessor to the S30. It is half the power of the S30 pro. I like it way more than the Neje. If you want to compare different machines check my reviews: hobbylasercutters.com/laser-reviews/ or watch my other videos.
Hello. I was looking for information on the Internet on the Sculpfun S9 laser. You did very good materials that helped me choose to buy Sculpfun S9. Thank you very much. Greetings from Poland. Arthur
I didn't try stainless, but I tried wood and it works very well: ruclips.net/video/iUTRLMqlYX4/видео.html Stainless steel should also work, you will just need to set much lower speed
@@JTMakesIt cool as ...if you ever get any denim ..even if 2 nd hand .any chance. You could try..cuting out sume ..2 checker clothing. Patch works. For me ...in base ball style letter s ..or .old english .or .block letter s .how much $$....would it be .say 15 of each style. And. If it would be much $ to post to me.. if in Melbourne Australia ..
@@ryanbeharry5636 it has more concentrated light spot. I am currently testing OLM2 Pro(more powerful than OLM 20w) and Ortur cannot engrave stainless steel, but S9 can. S9 also performs better at cutting thicker materials
Very informative and helpful video. The following questions from a technical point of view: 1) is the Laser Module 90w replaceable if it is defective? if so, where do you get these laser modules? 2) can you also operate a 60w laser module with an S9? or is the electronics (CNC control board) designed accordingly? maybe this question has already been asked in this chat ... 3) same question as 1) for the CNC control board? Thank you for your effort and a lot of work
Hi, the module is easily replacable and upgradable. It takes a less than a minute to remove the head. The s6 and s9 heads are interchangable and so are the driver boards. Mechanically the are also the same. The replacement/upgrade heads will probably be listed on banggood. But the life span of the head should be very long.
@@JTMakesIt Super cool and thanks for the quick reply! i will order this device with your proposed coupon and i will be very happy to use your advice! I discovered that one side can be extended. do you maybe also know how big this is offered? I am happy to watch your well-structured and well-thought-out lectures again and again. Likewise, I plan the housing like you did in the other video's. Do you have may be plans or a list of components for this? It's just a lot of fun to be here !!
@@gdinternationalpmjr3338 Thank you for watching! It is a pleasure working long hours and producing videos that people like you excited and happy :) I do not know about the extension, but on their site they say that that aluminum profile is standard and I guess you can extend it as long as you like. You would just need to purchase longer belts and cabling would also need to be extended. Maybe they will sell extension kit in the future. But this laser as it is is still very big. As for the ventilation box, I do not have plans and component lists because I built it from the parts I had at hand. I think it is not the best design, but its the best for the materials I had available :) In some of the first videos with laser box I have a link in the description where you can find some more photos with some basic dimensions. Thanks for being awesome and enjoying my videos :)
Hi, Some update! Now you can get replacement laser head for S9 here: hobbylasercutters.com/go/sculpfun-s9-head/ They also have replacement head for S6 and S6 Pro. The heads fit on most laser machines - Atomstack, Ortur, Eleksmaker...
@@JTMakesIt Thank you for your great info and for thinking of me! I will definitely buy this set including the whole machine. I started planning the electronic controls for the fans and sensor detectors for the housing. It will probably be a few more days until the real thing from Sculpfun S9 is there!
I wanted to know the lasers watts on it? please cause cause I've seen all the links and comparing prices then I see a link that its about upgrading the laser ?..is it 90w or not ...?
I followed the link to the plans for the Flex Box with living hinge & round corners. I don't think the plan at that link is the one you made in the video. I would really like to make your #2 project.
I've got an S6 and while I absolutely love it, I find the horizontal cut to be significantly wider than the vertical. Im considering buying the S9 module. Looks significantly better
Thanks for watching! I have never tried cutting MDF, so I can't say it, but the 10mm is about the practical maximum for softer woods. For 10mm Poplar plywood it takes around 20-25 passes at 600mm/min. I think it would need quite a lot of passes. You can go slower and use much less passes, but there would be more charring. For fast cutting of thick boards, you would need much more expensive machine.
Am a beginner. I love your project but am yet to start learning the lighburn software. I want to buy one of the laser machine. Can you please help me to with the softwares
Lightburn software is very easy to get started because it is very intuitive to use. There are a lot of beginner tutorial videos about Lightburn on youtube. And a lot of useful topics on their forum. And the Sculpfun S9 is a great machine to get started. If you want to save some money, you will find a discount coupon in the video description valid until the end of this month.
Hi everyone, I have an Anycubic mega S, I'd like to buy, install and use the laser engraving. Is it that possible? Is it enough and possible to replace the firmware with the mega pro and is it available to download? Thanks.
Hello, thank you for your video. Could you tell me how long it took to cut the bottom of the clock (3) and in how many passes. Thank you for your answer
Thanks for watching! I don't remember exactly, but 600mm/min and 6 passes took 45min approximately. It would cut it in way less passes but I always set more passes just to be sure. There is always a stubborn patch of glue somewhere in this wood.
What is the acrylic ran that can be cut in the machine knowing that I have 2 mm white acrylic but it has not been cut. I don't know why I hope you help me. Thank you
Two questions. First, can you or do you post your test file. Yours is the best I have seen. Second, I see that the laser is expandable if you buy extended aluminum rails. But, what belts does it take and where could you get them? I would assume you would need new belts to make it bigger. Thanks!
I have made a form so everyone could download the test file here: hobbylasercutters.com/download-test-files/ As for the extension I have just asked the manufacturer how this works and where to get parts and I will let you know soon.
Hello, I don't understand one thing, with the Laser GBRL program I must first make an incision and then the perimeter cut ...... how can I do it? It practically cuts me even what it just has to engrave......help me plese
No. Head has long life. But if you cut certain plastics like vinyl, a corosive and toxic gas is produced which can make your machine rust after some time.
Bonjour, super travail. Quels paramètres avez vous mis pour la découpe du Nombre 2 et quel type et épaisseur de bois avez-vous utilisé. Merci de votre réponse
Hi I have picked up a lot of interest in this as a hobby but mostly as a business opportunity. And I would love some guidance. I have followed a lot of tutorials but I would love to know those lazer machines capable of cutting metals
i have a sculpfun s9 machine why in white acrylic I have difficulty cutting it speed 50 pass 8x power 100, the result is cut but the edges are messy and slightly blackened, I use air conditioning, please help?thanks
White and transparent acrylic is basically impossible to cut with diode lasers of any power. The light reflects off and it does not absorb into the material.
@@ismailkhayla1549 black, green, red and yellow work well. Blue(because it is the same color as laser beam) and white(because it reflects everything off) and transparent (because the beam goes through) don't work. But the lighter the color the worse it cuts. The yellow one needs twice as many passes as black.
In the video description is alink to my website hobbylaseecutters.com where these 10 projects are described in detail one by one. Next to a box peoject there is a link to the generator.
You adjust the height of the laser by moving the module physically up or down. By adjusting the height you set the height at which the laser will be in focus.
essa madeira que mostra a cortar é com a máquina s9? como é que eu com uma maquina s10 10W não consigo cortar madeira de 8 mm?, a fonte de alimentação deve ser igual á minha "12V 3Amperes, e eu já tive que substituir a fonte por ele não aguentar, a maquina a cortar ela debita 8Amp, como é possivel mostrar essa maquina a cortar madeira que eu acho que tem mais de 6 mm, por favor diga-me
It depends on the type of wood. Here I was cutting a very soft and light wood. Harder and denser woods are much harder to cut and take much more power.
@@karimmradradwan4449 No, I haven't. There are too many new lasers, I can't keep up with all of them and test them all :) maybe I will soon be able to test it
Will the S9 module work as a replacement for the Atomstack A5 20w which only has 4.5 optical power? Even though the 4.5 optical power is great for detail it takes several passes to cut leaving my edges way too charred.
I would love to purchase this but have some questions: Where would I find patterns? Also how do you transfer patterns to the machine? Would I need a metal surface to make patterns?
Hi JT, I am considering buying this. Can I also make rubber templates with this sculpfun S9 that I can use to apply structures, mandalas, etc. in clay?
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
If you find this machine interesting, you can get it through this links:
Official store: shrsl.com/45klk
Or here: bit.ly/3JdGoEe (package with air assist pump!)
or here: hobbylasercutters.com/go/sculpfun-s9/
Use my coupon "BGdedaba" and get it for only 189$!
Or here: www.geekbuying.com/go/727rAkdN
Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l
(Affiliate link, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you can have even lower prices with my coupons!)
If you want to upgrade your existing laser check the replacement laser head only:
hobbylasercutters.com/go/sculpfun-s9-head/
Air assist also available!
It can be make watches main plate
Please reply
@@ARSHADPATHAN-ym4je what kind of material?
Aluminium or stainless steel
Tip, if you poly, or poly stain your wood first, then laser etch and cut, you are able to remove the burn halos using alcohol and a cloth... It's also easier to brush poly the entire wood before it's cut or etched. Then you can still use the spray after the cleanup for a final coat...
That sounds like a good tip. Do you have a recomendation for the type of poly to use? I've just ordered the S9 and really looking forward to start using it.
@@Trollgaard1st any poly will do...
Sorry guys, but what is "poly"?
@@bundeslachamt polyurethane coating, like a finisher
I’d recommend water based Polyurethane (Ie: polycrilic) because it doesn’t yellow like oil based. Just make sure you stir and don’t shake because you will introduce a ton of micro bubbles in the finish. I also don’t like foam brushes for the same reason.
If you find this machine interesting, you can get it through this links:
Official store: shrsl.com/40y0d
Or here: bit.ly/3JdGoEe (package with air assist pump!)
Or here: hobbylasercutters.com/go/sculpfun-s9/
Or here: www.geekbuying.com/go/727rAkdN
Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l
(Affiliate link, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you can have even lower prices with my coupons!)
If you want to upgrade your existing laser check the replacement laser head only:
hobbylasercutters.com/go/sculpfun-s9-head/
Air assist also available!
I love the steel "waste" plate! The idea of holding the materials like paper and leather down with just a few high-power magnets, very cool!
Thanks! Its cheap and it works!
Thank you so much for choosing Sculpfun!!!🥰
Does this cut thru plexiglass?
You don't need spraypaint to engrave into Stainless Steel, but it does help sometimes. I've found certain stainless engraves really well without paint, while others don't- I think thickness and exact composition of the metal is what makes the difference.
I watched multiple videos MULTIPLE saying in order to engrave metal I needed brake cleaner, a certain type of paint, etc. I spent over $100.00 on different substances and discovered all I had to do was use masking tape and turn the laser up as high as I dare. I etched multiple wedding cake knives with the date of the wedding, their names and a cutting board with "Welcome to our Kitchen Established" and the dtes.
@@CoastalBachelor2009 cool to hear that! I was using black paint but it was difficult to remove. Heard some people used mustard with great results :D
@@JTMakesIt Ha Ha Ha I haven't heard of that, but imagine the trouble one went through to get to that level of research "C'mon man, I promised them I'd be done by noon. We can't go to lunch until we get this finished." they say you can indict a Ham Sandwich, well, maybe we can laser engrave with one, or parts of it." Ha!
@@CoastalBachelor2009 😂
The little box case very nice.
Best Ideas for Use of Laser Cutting Machines !!
So dope I dident know it can cut. To. Not just wood burn or engrave
Hello, how many power and speed and interval should I put to engrave on the glass
100% power and slow speed around 300mm/min. It helps to first paint the glass black.
Ok thank you
Hello! Does anyone know how to cut transparent acrylic with Sculpfun S9? Tips and parameters?
I don't think you can effectively cut transparent stuff with any diode laser engraver.
oh! Wow. I thought that if it was possible... and make engravings either? Thank you very much for your answer!
@@diegoibanez7549 You can engrave transparent acrylic and glass, but you need to paint the surface black with a spray paint or water colors. After engraving you clean off the paint. Look at this video on how to engrave glass: ruclips.net/video/FLEVAfh_hDY/видео.html
@@JTMakesIt Many thanks! the video has been a great help! I am looking forward to trying it!
Hello, how many power, speed and pass should I put to cut PVC?
Full power and speed from 300-600mm/min
Can it do glass and cupper as wel ?
@@theenduror can do glass if you paint it black for engraving purposes. Watch my video of 5 unusual materials that can be engraved with diode laser. But it can't engrave copper.
Hello, can this machine cut on clear acrylic? and if it can, how many should I put speed, power and pass ?
Hello, can the machine cut golden PVC?
None of the diode lasers can cut clear acrylic. I don't have golden one at hand to try but it might work.
Are you sure I can cut golden PVC?
@@souqalmjd5284 no, because I can't test it
I read that I should not cut PVC because it could cause the metal of the machine to rust and ruin the motion control system. Correct or no ?
Will it be good mainly for imprinting stainless steel/metal bracelets? Do you recommend something else? Can you do on a round surface like cups?
Check out my last video. The machine I reviewed is just what you need
Hi! Can you recommend a machine for engraving on jewelry? 😀 I think it's mostly stainless steel or other popular alloys
This: ruclips.net/video/OpRa6S7aEo4/видео.html
Or this: ruclips.net/video/LvUuUONVthE/видео.html
you can help me choose which one I have to buy laser engraver that engraves and is more precise, I don't care about the cut but the engraving between which to choose ATOMSTACK S10 PRO 50W or Atomstack X7 Pro 50W or laser SCULPFUN S10 thanks
The SculpfunS10 has more stable and precise X-axis mechanics. You can also find a discount coupon for it here: hobbylasercutters.com/coupons/
Is this better than the s30 pro?
Is this brand better than neje?
I currently got my first laser and I got the neje 3plus but having trouble with it. Thinking of switching to another. Any recommendations?
This is the predecessor to the S30. It is half the power of the S30 pro. I like it way more than the Neje. If you want to compare different machines check my reviews:
hobbylasercutters.com/laser-reviews/
or watch my other videos.
Hello. I was looking for information on the Internet on the Sculpfun S9 laser. You did very good materials that helped me choose to buy Sculpfun S9. Thank you very much. Greetings from Poland. Arthur
What's the best balsa wood size ( thickness ) for making small n scale buildings with?
Super useful info! Appreciate the share!
Hello, can this machine engrave a photograph with a decent finish on a stainless steel keychain? Thanks.
I didn't try stainless, but I tried wood and it works very well: ruclips.net/video/iUTRLMqlYX4/видео.html
Stainless steel should also work, you will just need to set much lower speed
Can it cut thru denim jeans. Or patch work fabrics .
It can cut through denim and other fabrics with ease
@@JTMakesIt cool as ...if you ever get any denim ..even if 2 nd hand .any chance. You could try..cuting out sume ..2 checker clothing. Patch works. For me ...in base ball style letter s ..or .old english .or .block letter s .how much $$....would it be .say 15 of each style. And. If it would be much $ to post to me.. if in Melbourne Australia ..
Which would you say is better, this machine or the OLM2 20w?
This one has much more powerful laser head.
@@JTMakesIt so even though both are 5.5watts, this one is more powerful?
@@ryanbeharry5636 it has more concentrated light spot. I am currently testing OLM2 Pro(more powerful than OLM 20w) and Ortur cannot engrave stainless steel, but S9 can. S9 also performs better at cutting thicker materials
@@JTMakesIt thank you
Is the air assist necessary for everything you did?
I did everything here without air assist
@@JTMakesIt do you think the longer ray5 is better than aculpfun S9? Have you tried it?
What's the mark or the machine and what model is it, And thx in advance.
Check the video description
can it cut styrofoam
Styrofoam shoudn't be cut with lasers because it catches fire very easily
Very informative and helpful video.
The following questions from a technical point of view:
1) is the Laser Module 90w replaceable if it is defective? if so, where do you get these laser modules?
2) can you also operate a 60w laser module with an S9? or is the electronics (CNC control board) designed accordingly? maybe this question has already been asked in this chat ...
3) same question as 1) for the CNC control board?
Thank you for your effort and a lot of work
Hi, the module is easily replacable and upgradable. It takes a less than a minute to remove the head. The s6 and s9 heads are interchangable and so are the driver boards. Mechanically the are also the same.
The replacement/upgrade heads will probably be listed on banggood. But the life span of the head should be very long.
@@JTMakesIt Super cool and thanks for the quick reply! i will order this device with your proposed coupon and i will be very happy to use your advice!
I discovered that one side can be extended. do you maybe also know how big this is offered?
I am happy to watch your well-structured and well-thought-out lectures again and again.
Likewise, I plan the housing like you did in the other video's. Do you have may be plans or a list of components for this?
It's just a lot of fun to be here !!
@@gdinternationalpmjr3338 Thank you for watching! It is a pleasure working long hours and producing videos that people like you excited and happy :)
I do not know about the extension, but on their site they say that that aluminum profile is standard and I guess you can extend it as long as you like. You would just need to purchase longer belts and cabling would also need to be extended. Maybe they will sell extension kit in the future. But this laser as it is is still very big.
As for the ventilation box, I do not have plans and component lists because I built it from the parts I had at hand. I think it is not the best design, but its the best for the materials I had available :) In some of the first videos with laser box I have a link in the description where you can find some more photos with some basic dimensions.
Thanks for being awesome and enjoying my videos :)
Hi, Some update! Now you can get replacement laser head for S9 here:
hobbylasercutters.com/go/sculpfun-s9-head/
They also have replacement head for S6 and S6 Pro. The heads fit on most laser machines - Atomstack, Ortur, Eleksmaker...
@@JTMakesIt Thank you for your great info and for thinking of me!
I will definitely buy this set including the whole machine. I started planning the electronic controls for the fans and sensor detectors for the housing. It will probably be a few more days until the real thing from Sculpfun S9 is there!
Hi do you have an exemple on real leather ? The "leather" your are showing at 5:51 is not real leather, but plastic leather (skai).
I have it. It is the next video: ruclips.net/video/FLEVAfh_hDY/видео.html
i have this machine and just realized was not fully utilizing it ...thanks to JT
You're welcome:)
I wanted to know the lasers watts on it? please cause cause I've seen all the links and comparing prices then I see a link that its about upgrading the laser ?..is it 90w or not ...?
Check my latest video, I was measuring optical power of all my laser engravers
I followed the link to the plans for the Flex Box with living hinge & round corners. I don't think the plan at that link is the one you made in the video. I would really like to make your #2 project.
I have a question, do you have to have a computer? To use these lasers printers. Or could you use a smart phone also?
For this laser you need computer. Some others can be used with an app on a phone.
Does it cuts original leather approx 5mm ?
Yes, but very slowly. Check my reviews of more powerful machines
I've got an S6 and while I absolutely love it, I find the horizontal cut to be significantly wider than the vertical. Im considering buying the S9 module. Looks significantly better
You show this cutting plywood in the beginning does it cut plywood, if so, how thick will it cut?
Useful range is up to 10mm thick for poplar plywood.
Love the vid how can it cut 10mm mdf? If so how many passes you think I'll neeed?
Thanks for watching! I have never tried cutting MDF, so I can't say it, but the 10mm is about the practical maximum for softer woods. For 10mm Poplar plywood it takes around 20-25 passes at 600mm/min. I think it would need quite a lot of passes. You can go slower and use much less passes, but there would be more charring. For fast cutting of thick boards, you would need much more expensive machine.
i bought s9 laser six months ago
I have some problem in laser head..
I like to ask u something about usage...
Pls let me know how to contact to u
Go to my profile/about and you will find my email there
Do you suggest me to buy an algolaser one ?
Didn't test it so I don't know. But I have tested many laser engravers on my channel.
Am a beginner. I love your project but am yet to start learning the lighburn software. I want to buy one of the laser machine. Can you please help me to with the softwares
Lightburn software is very easy to get started because it is very intuitive to use. There are a lot of beginner tutorial videos about Lightburn on youtube. And a lot of useful topics on their forum. And the Sculpfun S9 is a great machine to get started. If you want to save some money, you will find a discount coupon in the video description valid until the end of this month.
Hi everyone,
I have an Anycubic mega S,
I'd like to buy, install and use the laser engraving. Is it that possible? Is it enough and possible to replace the firmware with the mega pro and is it available to download?
Thanks.
Watched this video 3 times. Still love some of the 'Things'. Thanks
Thank you!
Hello, thank you for your video. Could you tell me how long it took to cut the bottom of the clock (3) and in how many passes. Thank you for your answer
Thanks for watching! I don't remember exactly, but 600mm/min and 6 passes took 45min approximately. It would cut it in way less passes but I always set more passes just to be sure. There is always a stubborn patch of glue somewhere in this wood.
where is the link to the free online box generator you told us about??
Link to my website in video description. In the chapter describing the box you will find link to the generator
What is the acrylic ran that can be cut in the machine knowing that I have 2 mm white acrylic but it has not been cut. I don't know why I hope you help me. Thank you
White and transparent acrylic can't be cut with diode lasers
Where I can grab this tests for myself?
Check the video description
interesting what is the price
Check video description
Two questions. First, can you or do you post your test file. Yours is the best I have seen. Second, I see that the laser is expandable if you buy extended aluminum rails. But, what belts does it take and where could you get them? I would assume you would need new belts to make it bigger. Thanks!
I have made a form so everyone could download the test file here: hobbylasercutters.com/download-test-files/
As for the extension I have just asked the manufacturer how this works and where to get parts and I will let you know soon.
I have asked the manufacturer and they said they will soon be selling the extension components for this machine
Hello, I don't understand one thing, with the Laser GBRL program I must first make an incision and then the perimeter cut ...... how can I do it? It practically cuts me even what it just has to engrave......help me plese
If yo uwant to enrave, you should do the same as cutting, just less power
Could you show us how good the sculpfun s9 is at cutting gaskets in different thickness gasket material?
I could try, but gasket material is very different for each application.
can it cut metal? if not where can i buy those things that was shown in number 1?
Absolutely not. You would require a very powerful and expensive laser to cut even thin metal.
@@beer1for2break3fast4 Good to know
We're can I find files to purchase and if I want to engrave
@@lukedavis229 there is a link in description. They are free.
If I try to cut anything or carve anything, is the head harm or not?
No. Head has long life. But if you cut certain plastics like vinyl, a corosive and toxic gas is produced which can make your machine rust after some time.
Bonjour, super travail. Quels paramètres avez vous mis pour la découpe du Nombre 2 et quel type et épaisseur de bois avez-vous utilisé. Merci de votre réponse
Thanks! Check the video description to my website article. You will find all the information there.
@@JTMakesIt merci.
این دستگاه داخل ترکیه هم هست و اینکه این دستگاه ساخت کجاست...
Bonjojur, quels sont les paramètres pour graver une plaque en plastique allant sur les cercueils?
Start at 600mm/min with 40% power and adjust according to the results. You need some testing to make it right for each materials.
Hi I have picked up a lot of interest in this as a hobby but mostly as a business opportunity. And I would love some guidance. I have followed a lot of tutorials but I would love to know those lazer machines capable of cutting metals
@@mcphilipesla2346 lasers for cutting metal are much more expensive
Where is the link to the box generator software?
Check the link to the website article which describes these projects.
Hello, can I spray it with other colors other than black when I engrave on the glass?
You can, but darker the color, better the result will be.
Thank you very much and sorry for my many questions
Hello nice video
do you cut mdf? how much deep you can cut? In this S9
Haven't tried mdf yet but I think 5mm should be no problem.
Can this machine cut white acrylic?
None of the diode lasers can cut white acrylic.
Thanks
can u show me the tutorial to setting for cutting the board using laserrgbl
Cutting parameters are the same.
i have a sculpfun s9 machine why in white acrylic I have difficulty cutting it speed 50 pass 8x power 100, the result is cut but the edges are messy and slightly blackened, I use air conditioning, please help?thanks
White and transparent acrylic is basically impossible to cut with diode lasers of any power. The light reflects off and it does not absorb into the material.
@@JTMakesIt thank you for your answer, but your video shows yellow acrylic, is there any special acrylic for this machine??
@@ismailkhayla1549 black, green, red and yellow work well. Blue(because it is the same color as laser beam) and white(because it reflects everything off) and transparent (because the beam goes through) don't work. But the lighter the color the worse it cuts. The yellow one needs twice as many passes as black.
@@JTMakesIt thank you very much, the answer really satisfied me, good luck always
Hi i need your help i have this sculfun laser s9 & s10 kits yet cant cut i have tried all settings please
What do you want to cut?
Hello, can I engrave on clear acrylic or not?
You can. You just need to paint the surface black first (spray paint or water colors)
Thank you
Hey JT, I might be blind but I don't see the link to the free online generator for boxes. Can you post the link please? Thanks so much.
In the video description is alink to my website hobbylaseecutters.com where these 10 projects are described in detail one by one. Next to a box peoject there is a link to the generator.
What kind of wood do you use for project number 10, and what is the best thickness for this project
3mm thick poplar plywood. Poplar is soft and cheap wood which cuts very well. You can use 4mm or 6mm for a more durable toy.
Which is better? Ortur Aufero LU2-10A or this?
Ortus is 10W, S9 is 5W
Which type of wood do u use?
Poplar plywood from hardware store
Another question, in LaserGbrl software where set the deep of laser to cut, bend and engrave?
You adjust the height of the laser by moving the module physically up or down. By adjusting the height you set the height at which the laser will be in focus.
Halo... can i ask, what software u using? Thank u :)
Lightburn
@@JTMakesIt thank you🤝
essa madeira que mostra a cortar é com a máquina s9? como é que eu com uma maquina s10 10W não consigo cortar madeira de 8 mm?, a fonte de alimentação deve ser igual á minha "12V 3Amperes, e eu já tive que substituir a fonte por ele não aguentar, a maquina a cortar ela debita 8Amp, como é possivel mostrar essa maquina a cortar madeira que eu acho que tem mais de 6 mm, por favor diga-me
It depends on the type of wood. Here I was cutting a very soft and light wood. Harder and denser woods are much harder to cut and take much more power.
Great review, and one of the few I can find. Do you recommend this laser over the Ortur Master 2 Pro?
If you want more cutting power then choose S9. Ortur has better mechanics, but weaker laser.
What do you recommend the sculpfun s9 or the ortur pro LF laser or the atomstack A5 pro plus the new one
Thank you
For me personally the S9, because it is the best at cutting
Did you test the atomstack A5 pro plus the new one ?
@@karimmradradwan4449 No, I haven't. There are too many new lasers, I can't keep up with all of them and test them all :) maybe I will soon be able to test it
is this laser machine good for cutting on vinyl record? want make some design on vinyl record.
You can cut vinyl, but cutting vinyl produces toxic gasses which can harm your health and make the machine rust if you do it a lot.
👏🏾👏🏾Congratulations, perfect job, I'm setting up a craft shop, this machine will help us a lot.
Gained one more subscriber.🤝🏾🇧🇷
Awesome thanks!
Have you tried cutting clear acrylics? Or the colored transparent ones?
How can i cut gold mirror acrylic 1mm ? What is the power and the speed and nombre of cycle?
I never tried it. Try full power and 300mm/min. Test how many passes you will need
hello
What are the settings for cutting MDF wood 3 mm on the Lightburn program
Haven't tried it yet, but you should start with 600mm/min and full power set enough passes until it cuts through.
I need it to cut out foam boards for my craftsman tools, will it do yhis
It can cut black EVA foam. You can check my other videos, I have tested a lot of lasers
Would this engrave on brass or other metals other than steel? I'm looking to engrave a brass padlock
I still need to try brass
hi... what is the parameters that you used to cut the paper with lightburn? thanks
Check the video description for a link to my website. You should find all the information there
Qual aplicativo Você usou para testar a Sculpfun S9 ? Obrigado e excelente vídeo.
I used Lightburn software
How cut it veneer about 0,5 mm tick. Most the problem that happend the edge are black and buring by light color wood?
It can cut 5mm veneer. But every laser will leave black edges.
Is it possible to make stamps from a sponge? For water-based paints.
I think it could work with dense sponge
@@JTMakesIt Can you do such a test?
@@Przylga I would need to know the type of your sponge
Will the S9 module work as a replacement for the Atomstack A5 20w which only has 4.5 optical power? Even though the 4.5 optical power is great for detail it takes several passes to cut leaving my edges way too charred.
S9 module is an amazing upgrade to the A5 20w. The difference is like night and day!
Hi I like this product and I want to buy one
You can find the link in the video description
Yes, I know, but you cannot ship to the United Arab Emirates
And can you guys ship to United Arab Emirates ?
@@quwafelalarab834 Banggood ships worldwide
No, when I check in to Banggood, it tells me we can't ship to the United Arab Emirates
Hello I wanted to ask what software program you use and with what settings you cut acrylic because it doesn't work for me. Thank you!
What about air assist? Can you have that??
Did you try the Masking tape on the top and then cut?
Hello. Have you done a review on the xTOOL D1?
Yes, check my other videos
How to remove burn mark in MDF board?
Sanding
I would love to purchase this but have some questions: Where would I find patterns? Also how do you transfer patterns to the machine? Would I need a metal surface to make patterns?
check the video description. There is a lot more information on my website hobbylasercutters.com
What’s the better machine ? The S6 Pro or the new S9 ? Thanks
The S9 is more capable for cutting, although they are both very good machines.
Hi Is It compatible to a PC Win* and CAD Dxf dwg softwares? Thanks
Yes. It supports all these formats.
Can you send me power speed for cut and engraving for all materials
Check the link in the description. I have all settings on my website
Hi JT,
I am considering buying this. Can I also make rubber templates with this sculpfun S9 that I can use to apply structures, mandalas, etc. in clay?
Yes you can
what settings do you use for the wooden puzzle?
Check the video description
Nice video. I just bought last week the neje Master 2S Plus with N40630 Laser. Did you compare this laser with s9? Neje claims 7.5W optical power :-D
No I haven't gotten my hands on Neje yet., Maybe sometime I will
it kinda of looks like the master 2s uses a very similar style laser, just ordered a s9 we will see :p
Will this cut 1/2” birch plywood?
It should be on a thick side. Max I tried 10mm poplar. It probably can cut it but quite slowly with some charring.