Это видео недоступно.
Сожалеем об этом.

How to Replace Fuel Sending Unit 2005-2010 Chrysler 300

Поделиться
HTML-код
  • Опубликовано: 8 фев 2023
  • Buy Now!
    New Fuel Tank Sending Unit from 1AAuto.com 1aau.to/ib/1AFP...
    This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 2005-2010 Chrysler 300. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
    This process should be similar on the following vehicles:
    2005 Chrysler 300
    2006 Chrysler 300
    2007 Chrysler 300
    2008 Chrysler 300
    2009 Chrysler 300
    2010 Chrysler 300
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/oa8k/1A...
    • 10mm Wrench 1aau.to/oPd/1AX...
    • Air Blow Gun
    • Hose Clamp Pliers 1aau.to/oem/1AX...
    • Gloves 1aau.to/oGB/1AX...
    • Paper Towels 1aau.to/oyo/1AX...
    • Safety Glasses 1aau.to/oAh/1AX...
    • Brass Punch
    • Drain Pan 1aau.to/ouR/1AX...
    • Hammer 1aau.to/oNx/1AX...
    • Pick 1aau.to/oGI/1AX...
    • Razor Blade / Gasket Scraper 1aau.to/ohF/1AX...
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 26

  • @TRQ
    @TRQ  Год назад

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @keesgroup8977
    @keesgroup8977 5 дней назад

    This is great information. I used it to change the sending unit and fuel pump on a 2007 Charger. Thank you.

  • @bobbycortinas874
    @bobbycortinas874 8 месяцев назад +12

    How do you know if it’s the fuel sending unit or the fuel pump?

  • @jermaincrumb7218
    @jermaincrumb7218 5 месяцев назад

    Wow! I wish all mechanic videos were like this straight to the point with good details and no unnecessary jokes and comments. You do seem like a very interesting guy, Knowledge is power
    I appreciate people like you in this world.

    • @TRQ
      @TRQ  5 месяцев назад

      +@jermaincrumb7218 Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @teeziebaby11
    @teeziebaby11 3 месяца назад +1

    Think i might try this myself. This video is straight to the point! Thank you for this!

  • @candacebenford1734
    @candacebenford1734 Год назад +3

    This was the best tutorial on how to replace this part. Thank u so much for your time and patience 🙏🏾

  • @gilbertsepeda257
    @gilbertsepeda257 23 дня назад

    Many blessings, good job

  • @POMONAPIMPIN
    @POMONAPIMPIN Год назад +6

    Do you know if the passenger side fuel pump sender supposed to make a noise when the switch is on?

  • @tomh3652
    @tomh3652 4 дня назад +1

    Thats not the sending unit it's the fuel pump. The sending unit with the gas filter is on the right side under the rear seat.

  • @candacebenford1734
    @candacebenford1734 Год назад +3

    Thanks!

  • @soufianDEMOS
    @soufianDEMOS 5 месяцев назад +2

    It is a real pain to remove that damn retaining ring !!!

  • @blairfright9622
    @blairfright9622 8 месяцев назад

    I would like to correct you if I may,I would not use a vacuum to clean around the lock ring as the fumes entering the vacuum could cause a fire or explosion as the fumes will ignite from the armature spinning and causing sparks where gas could ignite

  • @LuisGarciaLENt
    @LuisGarciaLENt 3 месяца назад

    Is this process for the same for a 2012 Challenger?

  • @Spooky275_
    @Spooky275_ Год назад

    Solid ass tutorial

  • @bobbyagee3796
    @bobbyagee3796 4 месяца назад

    How do you feed the hose through without turning back on you

  • @user-uv6oq8mz5c
    @user-uv6oq8mz5c 7 месяцев назад

    when the ground wire to the battery id fisvonnector is didconnected, why is thr positive disconnected? Snf why id thar relay taken out too??

  • @jayyayy3203
    @jayyayy3203 Год назад +1

    Is this side b? I have a code it says fuel sending unit side b. Thx

  • @leroyking3058
    @leroyking3058 Год назад +2

    My right side didn't have no gas in it...but the left did..Is this an issue with the sending unit?

    • @TRQ
      @TRQ  Год назад

      +Leroy King We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @jeffm8895
    @jeffm8895 9 месяцев назад

    How do you know when the retaining ring is seated

  • @user-me3ni4ep9z
    @user-me3ni4ep9z 4 месяца назад

    On point

  • @jeffm8895
    @jeffm8895 9 месяцев назад

    Why not say drain tank or see a fuel Sumani when you pop the ring

  • @StealthyReplayz
    @StealthyReplayz 2 месяца назад

    Mine has 2 relays ?????

  • @superbowl32
    @superbowl32 Месяц назад

    I popped that drivers side and gas went all over the place -DO NOT HAVE A FULL TANK!

  • @user-uv6oq8mz5c
    @user-uv6oq8mz5c 7 месяцев назад

    Ve the desiginers have abandonded the simple way if filtering fuel that has been used of over 80 years, of a simplr filter after the fuel leaves the pump and before it hoes to thr engine🤬😡😡😡🤬😡