Excellent video, just got a 2008 with the drivers door material just hanging. Followed your video step by step and it looked factory when done. The only thing I would add is pay extra attention to the corners,they're tricky, especially the bottom strip,it's so narrow.
Thanks. Going to give this a try. I tried once w/ Gorilla glue and it worked for only a few months. I’ll try ordering the 3m headliner glue and applying as you did.
Yeah the plasti dip looks like black carpet but cheaper than this if the vinyl is gone when you buy the car buddy also if he sanded more it would be the better option for most
The reason the vinyl fell off of the door is because the foam is going bad. spraying glue on this foam is Not the right repair. Also the vinyl is shrinking from age. If you first remove all of the old foam and use a high quality, high heat glue the vinyl should stay up for a year or two, but it will fall off again as the vinyl will continue to shrink with age.
this "fix" may last APROXMENTLY 5 years. the foam backing is sprayed on a very thin plastic bladder. it should be completely removed to assure a permanent fix. And yes, it's very difficult to remove.
Excellent video, just got a 2008 with the drivers door material just hanging. Followed your video step by step and it looked factory when done. The only thing I would add is pay extra attention to the corners,they're tricky, especially the bottom strip,it's so narrow.
good idea pal, how many times need to dry that spray??
Looks great. Many thanks, I'll be doing this repair tomorrow.
I hope yours comes out great also. Just take your time. Thanks for watching.
Thanks. Going to give this a try. I tried once w/ Gorilla glue and it worked for only a few months. I’ll try ordering the 3m headliner glue and applying as you did.
Nice tips on how to apply the spray.
Glad it was helpful!
Thank you very much! I'm going to give it a try.
Nice work dude...
Curious as to how long this repair has held up??
Did it hold?
Yeah the plasti dip looks like black carpet but cheaper than this if the vinyl is gone when you buy the car buddy also if he sanded more it would be the better option for most
I am not a fan of the plasti dip....i guess it depends how well it is applied.
💡 thanks
The reason the vinyl fell off of the door is because the foam is going bad. spraying glue on this foam is Not the right repair. Also the vinyl is shrinking from age. If you first remove all of the old foam and use a high quality, high heat glue the vinyl should stay up for a year or two, but it will fall off again as the vinyl will continue to shrink with age.
How long did it hold?
Sorry for the late reply. Its been a year and its still holding up...intact. Just take your time when you do it.
Its been over a year I should say. My passenger side I did 2 years ago and still good.
3 years
this "fix" may last APROXMENTLY 5 years.
the foam backing is sprayed on a very thin plastic bladder. it should be completely removed to assure a permanent fix. And yes, it's very difficult to remove.
Its a fucking spider-web in a can lol
Haha pretty much it is