Water Pump Pliers Restoration [Laser Engraving And Red Rubber Handles]
HTML-код
- Опубликовано: 30 сен 2024
- In this restoration of the old rusty pipe wrench, I have inaugurated my new laser, in which I have applied a laser engraving on the pliers. The very old water pump pliers I had to hot bluing so that it is protected from rust in the future and the handles covered with liquid rubber. Furthermore, when restoring the old pliers, I had to drill, file, remove rust, sandblast, hot bronze and laser. I found this old hand tool in an old barn and had to have it for this restoration video.
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The old water pump pliers was heavily rusted, so I sprayed with rust remover the moving part of the pliers, that was enough already fortunately to be able to open them again. After disassembly I had to remake the pivot bolt, since it could not be knocked out I had to drill it out. Afterwards I sandblasted all parts in the sandblasting cabin. To protect the pliers from rust in the future, I heated the components in the hardening furnace and cooled them in oil, this process is called hot burnishing. I covered the handles with liquid rubber to make the pliers feel better in your hand and to protect you from possible electric shocks. Finally, I laser engraved a laser engraving on the old water pump pliers with a laser machine.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: Rust remover spray, pin punch, hammer, propane torch, starter, cordless screwdriver, drill, chisel, lathe, lathe chisel, pliers, milling cutter, sandpaper, sandblasting cabinet, corundum as abrasive, file, key file, hardening furnace, forging pliers, canola oil, rubber coating, screw, ratchet, laser machine.
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com...
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!
![Hammer Restoration [With Resin Eye]](http://i.ytimg.com/vi/Iw0ayAwGbAE/mqdefault.jpg)
![Hammer Restoration [With Resin Eye]](/img/tr.png)
The way that you put your heart & soul into every restoration is so appreciated by us viewers!!! This was an Excellently Done piece! Love the Laser Engraving!
Why you didn't treat the bolt same way with the pliers?
Because he made a huge hole in it??
Those look identical to a set I have that came from a 1985 Saab turbo tool kit. Same writing and everything
I had a 89 900 turbo with 4 doors that came with tools too. I wish I saved them.
That was brilliant 👍 love that laser etching. Great end result. Well done.
ㆍ22 ////////
@@MuhammadHabib mredtvtv
This video makes me think that everything has its own way in this life. Great restoration, awesome end result!!! Good luck!!!
Thank you! 🐢
Back when they were common and used for tools, I HATED the things. They ALWAYS would slip, pinching skin on the palm of the hand and leaving a huge blood-blister. You won't find many today because they were thrown so far away. Now that the old biter is restored nice and pretty (nice work BTW) cut the POS in 10 pieces, melt the chunks down and cast a lawn ornament from it. Perhaps a peaceful, harmless garden gnome.
This comment deserves more likes. I agree!
These are knipex brand and have built in handle stop to keep from hands from being pinched. In general I agree that the standard slipjoint pliers suck but not in this particular case.
@@garageliving3658Sorry to disparage the Knipex pliers. The other ones were especially fiendish in that they would always wait until the user was thinking "Hey they might work this time!" ...
Зачем восстанавливать хлам.Я такое выбросил и даже не помню куда.
i really enjoy these videos! the content as well as the editing style is really great. although you didn’t do any welding in this video, i’d like to suggest for any future videos that have welding to maybe put a dim box overlay on the clips with bright lights? this would make your videos a lot more accessible to people with epilepsy or light sensitivity. keep up the awesome vids :)
Thank you very much! 🐢
That's one unique and pretty awesome "pliers"
thank you for the awesome restoration video
Nice work, but the title of the video is misleading in Swedish. It says “Restaurering av rörtång” but “rörtång” is Swedish for pipe wrench (a Swedish invention by the way). But what you restored is a “polygrip”, a tongue-and-groove plier (or adjustable plier).
it is not pipe wrench. it is waterpump plier.
Ese es un pico de loro la llave estilzon es mas gruesa
8:33 deep fried water pump pliers
Тяжело находить новые темы для реставрации. Пичалька. Так Вы скоро и гвозди начнете реставрировать.😀
Weird, just used my set of those last night, and saw this video in my feed today. What the other guy said, think they were from a Saab
A VBW 966 is forever
يتعذر الاشتراك ولا يوجد جرس-يتعذر التعليق-لا أعلم .
a small angle grinder with a cup brush, and after 5 minutes, the pliers would be like new
Oooo ey ey ey!!!!
Finaly i had waited it)
Good luck.
... and pass my hello for Yours 🐢
you must be dutch , as far as i know we are the only ones calling it a water pomp tang .
WTF. You used channel lock pliers to tighten the bolts on the lathe.
Excelente trabajo, y aun mejor si lleva tu grabado, mis respetos a tu empeño y prolijidad en el terminado de la pieza. Saludos desde Argentina
А что это за процесс на седьмой минуте, чем он дует, воздухом?
Thee heating will destroy the heat treatment of the pliers
I wouldve stopped at 0:38. Yep, thats working good enough for me 😂
I’m an subscriber and I’m like your videos and could post more videos please
🤩🤩🐢
Godzilla became so small and Strong...
where can i find the red rubber coating,what brand.?
Is this a second channel from my mechanics?
Where do you find all of this rusty stuff?
Another great restoration. Love the expressions on the turtle's face.
Why do you cover the plasti dip can
You should use this to break Walnuts
What is that oil you use at minute 8:27 for?
Those are called channel lock pliers.
タイトル「パイプレンチ」字幕「ソケットレンチ」ウォーターポンププライヤ「カラス」
даже если сильно постараться невозможно довести ключ до такого отвратительного состояния как в начале ролика
он сильно постарался, чтобы инструмент заржавел.
Переводило , это не трубный ключ !
Forgotten Shine you've turned out another amazing restoration👍
WITH A ! FAKE !! BOLT !!
I always called these channel lock pliers or tongue and groove pliers. I have never heard them called water pump pliers, but you Learn something new everyday.
looks like an older Knipex
ウォーターポンププライヤーじゃね
I think I just saw this plier on other one of your videos, pincers restoration. Looked better there
great job.
Love the video never miss one and I'm suscribed
Hope I get a shout out
Do you ever sell the tools you refurbished?
no...🐢
Another fascinating restoration, laser etching lovely personal touch,
You never cease to amaze with your works of art.
Thank You
Thanks very much! 🐢
@@ForgottenShineRestoration love the face on Mr. Turtle thanks again for your awesome videos
WITH !! A ! FAKE !! BOLT !!
The turtle has a face lol🤣🤣🤣😂😂😂
Хахахахаха! 😁
What is a Canola?
Good job but who actually pays for your time to do this? How is it worth it?
The Laser Engraving is truly amazing to watch. Like how you add small funny things to keep the videos entertaining.
Thanks very much! 🐢
LIKE ! THE ! FAKE !! BOLT !!.IS ! TOO !!
Show de bola, esse w diferenciado eu tenho um mais simples. Mais bom também
Hey! Love your content btw. I just wanted to ask when the next video will be coming? Id love to see more blade restorations like knives, cleavers, maybe axes(just a personal preference, ik that’s not what everyone wants to see and you obviously don’t have to do more of them)
Thank you very much! 🐢🤩
Your videos are one of the most amazing and calming videos I really like it (a fan from Egypt)
Thanks very much! 🐢
Bonjour, il s'agit plutôt d'une pince multiprise, pince que les plombiers affectionnent, beau travail de restauration...
당신의 재능에 경의를 표합니다. 당신의 건강과 행복을 기원 합니다. ㅡ대한민국 에서 당신을 응원 합니다. 건강하십시오 🙏🇰🇷🇰🇷🇰🇷😄😄😄💙💚💟👏👏👏👍👍👍🖐🖐🖐 굿 바이 !
매우 감사합니다! 🐢
7:29. Черепашка негодует.
Нее. Она в ахуе! Как типа я сюда попала! 😁
Esses vídeos me fazem pensar que tudo tem jeito nessa vida. 🤔
That was genius with the bolt. You just changed the lives of a lot of formally frustrated people
YOU !! WERE !! ENTIRELY !! FOOLED !! BY ! THE !! FAKENESS !! OF !! IT !!
한국인이신가요? 외국분이신가요?
영어를 너무 잘 하시는것 같아서..
Awesome vid man! Stunning as always you're a master at restoration, huge respect, thanks for adding more sandblasting since the last time I requested you to :), keep up the great work man, see you on the next video, huge fan!
Thanks very much! 🐢
The turtle-
🐢🐢🐢 Huhu...
The Laser Engraving is truly amazing to see and also first time see how rubble handle being made 🤩🤩
I just learned why those rubber handles have that nipple on the end - that was the drip at the bottom!
Thanks very much! 🐢
Along with a FAKE !! BOLT !! NOW !!
i love the overall look! loons great! my favorite part is when you laser it!
WITH ! A ! FAKE !! BOLT !! TOO !!
Turtle looks amazing lol
This is a great and satisfying restoration and all but why is nobody talking about the
👁👄👁 turtle 🐢
Please 😭😭😭 the highlight of my day 💀
🐢🐢🐢🤩
I only discovered this channel a couple days ago, and can I just say how freaked out I was for a few moments the 1st time I saw a little face on the red brush thing? It wasn't even in a close up; It was just there in the background.
🤣🤣🐢
Very nice work FSR....if you're not opposed to giving out trade secrets, how do you do the different expressions on your little mascot?
Das ist kein Geheimnis, aber schwer zu erklären, denn jeder benutzt andere Programme...🐢
I would like to thank you for your translation to arabic and other languages
Love the tirtles face
I have a piece of it that is replica and orange, it is more than 30 or 40 years old
O nome desse ferramenta é
"alicate bomba d'água"
That bolt really didn't want to leave🤣 love the laser etching too. Great work 👌
Thanks very much! 🐢
THE ! BOLT !! IS ! FAKE !! NOW !!
Чем делали лазерную гравировку? Как называется аппарат?
Wow what is that rubber coating? Will the stuff left in the can harden now that it's been exposed to air or is there a way to reseal it without some sort of industrial vacuum?
No, only one layer had become hard, but underneath it was still liquid 🐢
Nice video mate and very good work. Keep it up. 👍😁
Thanks very much! 🐢
FOR MAKING ! A !! FAKE ! BOLT !! TOO !!
Me encantó cuando aparecieron los subtítulos porque no entiendo casi nada de inglés además me encantó el vídeo♥️
Nicely done. What’s your turtles name. He adds a touch to your videos. 🐢🔨🛠️
its just "turtle" 😅🐢
I have 2 pairs of these VBW "Gland Nut Pliers" (That's what said on the manufacturer's box) that I was given with my issue toolkit as a Gas Fitting Apprentice in 1969. They were commonly called Gordons because up to changing to VBW brand the previous issue version was made by Gordon Tools in the UK. Apart from the red paint mostly wearing off they are still in perfect working condition after daily use and abuse for 40 years when I retired and still get used pretty regularly now.
It's my first time watching your content but i'm liking it. Although I think the turtle was saying some things to me.
Thank you! 🐢
亀の目って動くんですね… びっくりしました。
cool these videos restore objects, rust is not for you to give utilities
Excelente trabajo!!!
I love the comedy in this video. From the funny turtle faces to the sandpaper flower
Thank you very much! 🐢
Genial ... Parecen Nuevas. Saludos desde Barcelona Catalonia
¡Muchas gracias! 🐢
Please what product name is the liquid rubber? Thanks
plasti dip 🐢
Nice restoration. I like how you left some parts with an old finish, and the other parts updated and functional.
Thank you very much! 🐢
UPDATED !! FAKE !! BOLT !!
Finally a masterpiece ❤🔥
🤩👍🐢
That red turtle xDDDD
Are you the tortoise in the oven?^^ 🤣🤣 Goood job 👍👍🏻👍🏼👍🏽👍🏾👍🏿
🤣🤣🐢
00:27AM e eu vendo isso, um beijo de São Paulo - Brasil
Divirta-se 😅 Saudações da Alemanha 🐢
Idk why but 1:26 is satysfying
Was this wrench excavated from the titanic under the ocean?? Why is it so rusty haha
🤣🤣🐢
فيديو جميل كتابع جديد
My daughter (7) and I love your videos! She said this is the funniest one we've watched so far and she loves the turtle!
They’re called channel locks
Water pump plier/rörnyckel/rörtång? That's a polygrip.
Отличная работа, ещё лучше была бы гравировка, а так мои почтения из России.😊
Большое спасибо! 🐢
The turtle looks like he’s scared of everything, even when he likes something, for example 10:36
Très bon travail 👍🏻