Bike came out very well, I don't even mind the square headlight. I found that using an angle grinder with a flap wheel works to smooth out the seat foam edges to make it nice and smooth. No irregularities once the seat cover is stretched over.
Good day. Very nice job. I am doing the same job at this moment and watched your video several times. Convinced that the tank you’ve used, would be easy to fit. So I’ve ordered it. Unfortunately, it seems that there is a lot of work to do at the tank, to make it fit. Unfortunately, you didn’t show that. Pity, you haven’t shared this important information. Sincerely Ardash
Salut. Je te suis depuis le début de t'es vidéo et c'est impressionnant le matériel que tu as réussi à acquérir. Je suis moi même en train d'acheter un petit atelier et je sais le coût que peut avoir un tel investissement et de surtout sans cesse le remplacer par le meilleur... Encore du très bon boulot pour ce XT. Bravo et bonne continuation. 👏😉
Elle est superbe! Et je pense que ton ami a bon goût, pour moi la plaque phare d’est la plus belle pièce de la moto, j’adore ce look carré des années fin 80/début 90. Avec les soufflets de fourche, et bien sur elle est rouge, donc encore mieux.
Hello @Tahitian Rider super boulot, comme d'habitude !!! Merci pour tes vidéos. Au fait c'est difficile de créer le support de selle avec la plaque PVC? Et tu peux me dire quelle housse tu as utilisé pour la selle stp? Meci :)
Amazing work brother i ve been following u for a long time and i have a question. İ ve heard these led stoplights and signals etc. are using lower electricity so the entire trash electricity goes back to conjector. Do you think it may cause problem or can we use the old XT with new generation led lights ?
Great build. Definitely subscribed. I learned to ride on an xte600, back in 95. PS. Ma première chaîne YT française. Comme quoi quand le contenu est bon, tout arrive. Je vais suivre tout ça de très près.
@@redbaron8154 i built a lot of bikes. I own a lot of bikes and i have my own motorcycle workshop. Yeah, i did it better. Do you own bikes? Do you build or restore bikes? No, so take care what you wright, kid.
Awesome bike!! I'm also building a XT600 (2002) scrambler myself, very inspiring video!!
Young man, I congratulate you. You have done a fantastic job on that motorcycle. It’s so good to see a young man so highly skilled ,well done
Bike came out very well, I don't even mind the square headlight. I found that using an angle grinder with a flap wheel works to smooth out the seat foam edges to make it nice and smooth. No irregularities once the seat cover is stretched over.
Thanks for the tips, will try that next time ;)
Bravo !!! Encore une belle réalisation que voila !!! Continue, c'est très sympa à regarder tes vidéos. Le bonjour de France.
Thank you for that. I always wanted to see that Triumph looking gas tank on a build, and now I know what it looks like. Great job!
Thanks!
Happy to see you in your own shop now. Keep up the great work!
Nice an Xt600 scrambler!!! Gonna be dope!
Love the headlight assembly 😍
Hes back!! 🥳
I am Indeed!! 😜
Very glad to see you got your own shop now!
Thanks :)
Aaaaaah content que tu sois de retour !
✌️
Hell yeah!!! I needed some inspiration to continue my project bike! so nice!
great work, very clean and modern looking!
Bravo Tom, c'est SPLENDIDE!!!
So awesome build!
A nice 600 thumper, good job TR!!
Thanks 👍
Love the color! Love the bike! :D ur inspiring me to try and do this myself one day!
Very good looking bike, great job.
Only thing is that I would put a round headlight
Une petite pause au Gabin après les prises de vue dans l'usine ^^?
Encore une belle transformation bravo !
AMAZING JOB!!!
great work, great bike! thanks for the input and sharing! u deserve the best
An amazing work, it looks great, congrats 👏
I love this video. Get yourself an Air Staple Gun, and you will never use that hand held one again.
red makes its head pretty huge, but tail are all black, which makes little unbalance
however it is definitely beautiful.
Wow this is cool
I too prefer a round headlight..plus with chrome spokes to that black rim
Yeaaaaah just one thing Watching your new transformation video : « Whaouuuuu Whaouuu 🤩 »
😂 whaouuuwww thanks 🤩😂
Very cool build… may have to do something similar some day. Great work, great channel!
Thanks, go for it ;)
Great work. I'm about to do a xt600 project too. Lets se what happens..
What size are the front wheel. Is it 21
Beau boulot elle est vraiment magnifique 😍 🤩
Effectivement, un phare rond lui serait mieux allé, à ce scrambler. Mais, les goûts et les couleurs...
Beau boulot, en tous cas, bravo.
crazy nice build
good job . I would like to know where the rear footrest are coming from? Thanks
Outstandingly nice!
What a stunning bike. Whick headlight is that
Good day. Very nice job.
I am doing the same job at this moment and watched your video several times.
Convinced that the tank you’ve used, would be easy to fit.
So I’ve ordered it.
Unfortunately, it seems that there is a lot of work to do at the tank, to make it fit.
Unfortunately, you didn’t show that.
Pity, you haven’t shared this important information.
Sincerely
Ardash
Nice ! But EYE PROTECTION 🥽 when using the wire wheel !
Salut. Je te suis depuis le début de t'es vidéo et c'est impressionnant le matériel que tu as réussi à acquérir.
Je suis moi même en train d'acheter un petit atelier et je sais le coût que peut avoir un tel investissement et de surtout sans cesse le remplacer par le meilleur...
Encore du très bon boulot pour ce XT.
Bravo et bonne continuation. 👏😉
Schöne XT, gute Arbeit
Love your chanel nice job keep going.
Thanks! ;)
Elle est superbe! Et je pense que ton ami a bon goût, pour moi la plaque phare d’est la plus belle pièce de la moto, j’adore ce look carré des années fin 80/début 90. Avec les soufflets de fourche, et bien sur elle est rouge, donc encore mieux.
Really nice 👍🏻👍🏻🥇
La plaque phare Cemoto est une bonne idée, ça passe carrément bien. Sinon, ça avait l'air d'être un vraie galère à enlever le disque arrière !
Très galère en effet avec toutes les vis foirées !
What wheel and tire size did you go for here? Looking to do similar. Thanks!!!!
Hello, the machine looks great! Would you tell me which gas tank you have installed?
I like it and would be proud to ride it!
كالعادة عمل رائع، amazing job
Is the tank mounted using the stock rubbers in the front?
Awesome build!! Where are those rims from??
it looks great
Beau travail ✌️
Ohh nice i hope you have heatshielded the number plates on the side cause they are gonna heat soak and burn really bad
Whats the name of that headlight style? Or how can i find it on Internet?
Nice video
magnifique comme a t'on habitude!
What’s the name of the music at 5:21 ?
Masterpiece!
Where did you buy the headlight from?
Interesting project!
Si un jour tu l'as vends, je suis là 😊
Quel talent.👍👍✌
Hello @Tahitian Rider super boulot, comme d'habitude !!! Merci pour tes vidéos. Au fait c'est difficile de créer le support de selle avec la plaque PVC? Et tu peux me dire quelle housse tu as utilisé pour la selle stp? Meci :)
Very cool... 😎🤘
Impressive! How long was the build and a rough cost on parts?
hi isnt it dangerous to leave the exhaust there close to the seat and not have it covered with the plastic? for a passenger i mean
dangerous as in burn urself
I love those tires!! Trying to build something close to this what brand and type are those??
FFfffffffffffeeeeeeennnnnnnnnnnnnnnnnnnntttttttttttttttttttttttttaaaaaaaasttttttttttttttiiiiiiiiiiicccccccccccc Mate .
Excellent❤
Amazing work brother i ve been following u for a long time and i have a question. İ ve heard these led stoplights and signals etc. are using lower electricity so the entire trash electricity goes back to conjector. Do you think it may cause problem or can we use the old XT with new generation led lights ?
How much would it cost to make a build like this?? Amazing video btw.
Качественно, а главное-быстро))
Hi, do you still have the rear subframe that you cut off? are u willing to sell it?
no I no longer have it :/
Very passion. Excellent job bro, compliment. Mega like by Warmachine bodybuilding of garage Gym italy
Big thanks!
Is it a “caffe racer” or a “scrambler”? They are usually totally different styles of bike.
Meu irmão que moto linda parabéns pelo projeto, me deu até vontade de fazer uma igual rs linda mesmo.
Great build. Definitely subscribed. I learned to ride on an xte600, back in 95.
PS. Ma première chaîne YT française. Comme quoi quand le contenu est bon, tout arrive. Je vais suivre tout ça de très près.
Where are you located
Brazil aqui
yes, I like it very much
so beauty....
Quedó Increíble la moto y que modelo de llantas le pusiste
looks great, but yeah, a round headlight would be better
Круто получилось, только прошу, выкладывай видео по чаще)
Amazing
Why use carpets in a workshop? Don't they just get dirty? Genuine question
bravo
TOP !
Con faro redondo sería más imponente 👌🏼
I love it
isnt this more of a scrambler than cafe? great bike regardless
I prefer flat ass trackers. What ever, 👍 thanks!!!
101 how to burn passage thigh. Anyway cool built.
The cover for cable is not good
wow!
For a better work, you can repleace light with a round one old style....like Honda Cb1000R👍✌😎
Super belle
Keren bang
TOP
I like your series, but the proportions doesnt fit properly.
@@redbaron8154 i built a lot of bikes. I own a lot of bikes and i have my own motorcycle workshop. Yeah, i did it better. Do you own bikes? Do you build or restore bikes? No, so take care what you wright, kid.
@@reinhardzinter2219 looks great but that front brake line and cable need tiding up for anything calling it's self a scrambler
GREATT