YES, BUT MAKE THE REAR END BETTER THAN THIS BIKE, DONT CUT THE FRAME AWAY, DONT FIT A THIN SEAT, FIT A REAR MUDGUARD OR TYRE HUGGER, FIT A REAR LIGHT UNIT (SMALL LED TYPE) AND THE FRONT MUDGUARD SHOULD FIT OVER THE TYRE AS THIS ONE LOOKS SILLY AND DDOESNT KEEP ANY CRUD OFF THE BIKE, MAKE SOME STAINLESS-STEEL SIDE PANELS WITH HOLES DRILLED IN THEM AT THE FRONT LEADING EDGE (NOT ALL OVER THE PANEL) DONT WRAP ANYTHING WITH CLOTHE WRAPPINGS, BE IT HEADERS OR STANCHIONS, ITS L00KS CRAP AND ENCOURAGES RUST, OTHER THAN THEM THINGS THIS BIKE IS GOOD, P/S, KEEP THE HIGH BARS, CLIP-ONS AND OTHER RACE BARS ARE A STUPID IDEA IF YOU WANT TO RIDE FOR MORE THAN 20 MILES, IF YOU USE A HONDA FIT THE HONDA SPEED WINGS ON THE TANK WHERE HONDA WOULD HAVE PUT THEM, DOMINATORS LEND THEMSELF TO STREET SCRAMBLER BUILDS WELL, AS DO THE BIG TWIN XL's, DONT USE ANY ALLOY WHEELS, SPOKED ONLY AND DON'T FIT SPOKE WRAPS THEY ARE ONE OF THE WORST THING EVER MADE FOR A MOTORBIKE, IM NOT KEEN ON SPOTLAMPS BUT IF YOU FIT THEM USE THE B.M.W ONES, SQUARE AIRCRAFT ALLOY HOUSINGS WITH L.E.D's, REMOVING AIRBOXES IS OK BUT FIT K&N'S (ANY RED ONES L00K OK) WHEN YOU FINISH IT GIVE IT TO ME AND I WILL ADVERTISE YOUR ENGINEERING SKILLS AND YOUR WILL GET LOADS OF ORDERS, I SAVED ADDIDAS FROM CLOSING ITS UK FACTORY, INCREASED SALES BY 25% FOR LEVIS U.K. (@TENS OF MILLIONS of £'s) AND SAVED OVER 100 LOCAL JOBS AT THE "NORTH FACE" CLOTHING FACTORY, IT PAYS TO ADVERTISE AND ADVERTISING WITH ME WILL COST YOU NOTHING, NOT A SINGLE PENNY IN CASH JUST ONE BIKE, TARGETTING POTENTIAL CUSTOMERS, SO WHAT WILL COST YOU A FEW GRAND WOULD COST YOU HUNDREDS OF THOUSANDS OF POUNDS IN CONVENTIONAL ADVERTISING PAYMENTS, THE R&D, DESIGN, TV COMMERCIAL SHOOT, TV AIR-TIME ON TOP GEAR COSTS COMPANIES A LOT OF MONEY (IN BACK HANDERS FOR CLARKSON AND Co) INTERNET ADVERTISING WITH GOOGLE COSTS A LOT OF MONEY, MAGAZINE FULL PAGE ARTICLES DISGUISED AS REVIEWS, THESE ALL COST TENS OF THOUSANDS OF POUNDS AND AS I SAY A FEW GRAND FOR A ONE-OFF BIKE AS PAYMENT, I GUARANTEE TO RIDE IT 50 MPW, P.S. FIT TRAIL TYRES (75% TRAIL - 25% ROAD) DONT LOWER THE SEAT HEIGHT IM NOT A DWARF, MAKE SURE IT'S ELECTRIC START, MY PRESENT RIDE IS KICK START (ITS A HONDA SINGLE SO STARTS 1st KICK) BUT IM NOT GETTING ANY YOUNGER SO ITS ELECTRIC START FROM NOW ON, CHEERS, LET ME KNOW WHEN ITS FINISHED AND WE CAN ARRANGE THE HANDOVER, I WILL ARRANGE FOR THE PRESS TO BE PRESENT, THE LOCAL TV NEWS CREW AND RADIO JOCK ALAN ROBSON (A.K.A. THE FLASHING BLADE) METRO RADIO
You guys really cleaned that one up nicely. Perfect. Nothing is faster on bumpy, tight, hilly roads than a thumper. I used to smoke many Ninjas, GS' s and FZ' s back in the day on my 600 Honda. They have twice the power but my bike is 100 lbs. lighter. I love it
@andersd8956 Yep. A 28 HP 87 XL 600 with a top speed of under 90 mph smoking a 140 HP fz 750. Pulling him on every strait and smoking him through the turns with my foot down sliding with knobbies on the street. Also smoked my friends GS1100 on the same road. That's Jesus Maria Road, runs from Moke Hill highway 49 to Mountain Ranch Road Road. I can't go as fast on that road with my GS1150 or Kawasaki Kz 1000 either. Understand, the road is a patchwork quilt of potholes and very tight turns and abrupt elevation changes. Excessive power isn't needed. Lightweight and handling rule the day in these California hills. On sissy roads the bigger heavier bikes can use their power and beat the thumper, of course. But not on my hill brother.
One of THE best Timelapse-Videos EVER!!! No one is talking about sponsors or any other bullsh*t! Just the evolution of the bike. This is the content I am here for!!!
Great idea to use a skate board for seat plate. I did that also, years ago, on my Honda CX500. Turned out to be a brat cafe racer and everyone loved it. Keep it up and ride safely. 😎
La calidad. Espero y dedicación con que : 1) HICIERON ESTE VIDEO. ES ABSOLUTAMENTE ASOMBROSA. 2) MI RESPETO Y APOYO A LOS QUE HICIERON DE ESA MOTO UNA OBRA DE ARTE, LAS scrambles no son mis favoritas pero está se ve súper bonita y bella. Saludos desde Venezuela. Like y nuevo sub. Los felicito. .... The quality. I hope and dedication with which: 1) THEY MADE THIS VIDEO. IT IS ABSOLUTELY AMAZING. 2) MY RESPECT AND SUPPORT TO THOSE WHO MADE THAT MOTORCYCLE A WORK OF ART, THE scrambles are not my favorites but this one looks super pretty and beautiful. Greetings from Venezuela. Like and new sub. I congratulate you.
Beauty, little things like tyre white marker matter, still do that on every tyre i buy. And a Von Dutch flying eyeball, it's a tradition for older riders, en zondag poets en peildag🤔
Well done guys, it's a good job, it's well filmed, and the time lapse is well paced. I have the same project here in France in 2024, I think this fuel tank is perfect for this bike, do you have a link to order it please?
Nyt on hienoa jälkeä! Näitä lisää. Saa käydä mun kanavan laittamassa seurantaan vlogi tyyliin rakentelen cbr xx:ää aina kun kerkiän. Nyt on ollut pakkaset niin ei tarkene pihalla askarrella niin on ollut taukoa.
Excellent work!! It would be useful to pass the frame as well as the rest of the parts with varnish, the tank and not only. It would be nice for the next project to do a jawa reconstruction.
Perfection bro , but i will like it more if you replace the handlebar with a bracelet handlebars , i think this is a big upgrade for your cafe racer bike , anyway you did a great job there you deserve my subscription and like .
A Honda FMX650(XR650L engine),built in Spain by Montesa,the trials bike people(Honda company)....i'm building an ADV bike out of my one,be put up on here later! Two faults with the bike,the forks were too long from the factory(front end high,looks like the rear squats), i've had my forks shortened, and very low on power....that's being addressed! 19" f/wheel going on my one,as well as a 25litre fuel/gas tank!
pirun hienoo työtä ootte saanu aikaa! Itsekki haluisin joskus myöhemmi rakentaa tämmöse scrambler/cafe raceri isälleni ku se niistä hirveesti tykkää ja tämmöne o iha piru hienoo kattottavaa ku joku oikeesti rakentelee tämmösiä. Aplodit ja hyvää joulua!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Would you like us to do a new project?🤔
Yes more like the enduro…. like this one..
Yes please
Please more about urban LATAM moto to dual purpose or to scramble adventure 😱
YES, BUT MAKE THE REAR END BETTER THAN THIS BIKE, DONT CUT THE FRAME AWAY, DONT FIT A THIN SEAT, FIT A REAR MUDGUARD OR TYRE HUGGER, FIT A REAR LIGHT UNIT (SMALL LED TYPE) AND THE FRONT MUDGUARD SHOULD FIT OVER THE TYRE AS THIS ONE LOOKS SILLY AND DDOESNT KEEP ANY CRUD OFF THE BIKE, MAKE SOME STAINLESS-STEEL SIDE PANELS WITH HOLES DRILLED IN THEM AT THE FRONT LEADING EDGE (NOT ALL OVER THE PANEL) DONT WRAP ANYTHING WITH CLOTHE WRAPPINGS, BE IT HEADERS OR STANCHIONS, ITS L00KS CRAP AND ENCOURAGES RUST, OTHER THAN THEM THINGS THIS BIKE IS GOOD,
P/S, KEEP THE HIGH BARS, CLIP-ONS AND OTHER RACE BARS ARE A STUPID IDEA IF YOU WANT TO RIDE FOR MORE THAN 20 MILES, IF YOU USE A HONDA FIT THE HONDA SPEED WINGS ON THE TANK WHERE HONDA WOULD HAVE PUT THEM,
DOMINATORS LEND THEMSELF TO STREET SCRAMBLER BUILDS WELL, AS DO THE BIG TWIN XL's, DONT USE ANY ALLOY WHEELS, SPOKED ONLY AND DON'T FIT SPOKE WRAPS THEY ARE ONE OF THE WORST THING EVER MADE FOR A MOTORBIKE, IM NOT KEEN ON SPOTLAMPS BUT IF YOU FIT THEM USE THE B.M.W ONES, SQUARE AIRCRAFT ALLOY HOUSINGS WITH L.E.D's, REMOVING AIRBOXES IS OK BUT FIT K&N'S (ANY RED ONES L00K OK)
WHEN YOU FINISH IT GIVE IT TO ME AND I WILL ADVERTISE YOUR ENGINEERING SKILLS AND YOUR WILL GET LOADS OF ORDERS, I SAVED ADDIDAS FROM CLOSING ITS UK FACTORY, INCREASED SALES BY 25% FOR LEVIS U.K. (@TENS OF MILLIONS of £'s) AND SAVED OVER 100 LOCAL JOBS AT THE "NORTH FACE" CLOTHING FACTORY, IT PAYS TO ADVERTISE AND ADVERTISING WITH ME WILL COST YOU NOTHING, NOT A SINGLE PENNY IN CASH JUST ONE BIKE, TARGETTING POTENTIAL CUSTOMERS, SO WHAT WILL COST YOU A FEW GRAND WOULD COST YOU HUNDREDS OF THOUSANDS OF POUNDS IN CONVENTIONAL ADVERTISING PAYMENTS, THE R&D, DESIGN, TV COMMERCIAL SHOOT, TV AIR-TIME ON TOP GEAR COSTS COMPANIES A LOT OF MONEY (IN BACK HANDERS FOR CLARKSON AND Co) INTERNET ADVERTISING WITH GOOGLE COSTS A LOT OF MONEY, MAGAZINE FULL PAGE ARTICLES DISGUISED AS REVIEWS, THESE ALL COST TENS OF THOUSANDS OF POUNDS AND AS I SAY A FEW GRAND FOR A ONE-OFF BIKE AS PAYMENT, I GUARANTEE TO RIDE IT 50 MPW,
P.S. FIT TRAIL TYRES (75% TRAIL - 25% ROAD)
DONT LOWER THE SEAT HEIGHT IM NOT A DWARF,
MAKE SURE IT'S ELECTRIC START, MY PRESENT RIDE IS KICK START (ITS A HONDA SINGLE SO STARTS 1st KICK)
BUT IM NOT GETTING ANY YOUNGER SO ITS ELECTRIC START FROM NOW ON,
CHEERS, LET ME KNOW WHEN ITS FINISHED AND WE CAN ARRANGE THE HANDOVER, I WILL ARRANGE FOR THE PRESS TO BE PRESENT, THE LOCAL TV NEWS CREW AND RADIO JOCK ALAN ROBSON (A.K.A. THE FLASHING BLADE) METRO RADIO
ร
You guys really cleaned that one up nicely. Perfect. Nothing is faster on bumpy, tight, hilly roads than a thumper. I used to smoke many Ninjas, GS' s and FZ' s back in the day on my 600 Honda. They have twice the power but my bike is 100 lbs. lighter. I love it
@andersd8956 Yep. A 28 HP 87 XL 600 with a top speed of under 90 mph smoking a 140 HP fz 750. Pulling him on every strait and smoking him through the turns with my foot down sliding with knobbies on the street. Also smoked my friends GS1100 on the same road. That's Jesus Maria Road, runs from Moke Hill highway 49 to Mountain Ranch Road Road. I can't go as fast on that road with my GS1150 or Kawasaki Kz 1000 either. Understand, the road is a patchwork quilt of potholes and very tight turns and abrupt elevation changes. Excessive power isn't needed. Lightweight and handling rule the day in these California hills. On sissy roads the bigger heavier bikes can use their power and beat the thumper, of course. But not on my hill brother.
One of THE best Timelapse-Videos EVER!!! No one is talking about sponsors or any other bullsh*t! Just the evolution of the bike. This is the content I am here for!!!
Every single kid in this world should have the right to have proper tools and a place to use them. Thank you guys for keeping creativity alive!
Girls....shaving their fur,pouting into a camera phone....difference of the sexes!
Great idea to use a skate board for seat plate. I did that also, years ago, on my Honda CX500. Turned out to be a brat cafe racer and everyone loved it. Keep it up and ride safely. 😎
Sounds good! Thank you!
And here i am cutting a leaked jerry can and beating it with a mallet like a savage
I love how you use a skateboard trucks for the tail light. Thats pure creativity.
those turn signals made from trucks are sick, super creative!
Nghe xong bài này cái thấy tâm trạng buồn và nặng nề kinh khủng. Nhưng lại cứ phải replay hoài cả ngày😍
Love the truck as the tail light, and the 'don't die' key chain XD
QUE EXCELENTE MODIFICACIÓN, FELICITACIONES POR EL TRABAJO, GRACIAS POR COMPARTIRLO... UN ABRAZO DESDE LA RIOJA - ARGENTINA
So cool with what you did with the skateboard truck.
the video started with big coats and endes shirtless.. what a beautyfull journey. amazing bike
Because of simplicity and creativity, one of the coolest project I've seen.
damn that truck as rear lamp in the end shocked me XD too creative bro i cant' handle it
Really creative and fun to watch, love what you did with the trucks!
Fun
ruclips.net/video/vnjRNz81MFs/видео.html
I'm at the 4:13 stage - finding how to mount a seat, great vid!
Awesome result - especially I like a tank-seat line!
Thank you! Nice to hear, that was one of the most important things for us
Dude those trucks for the rear brakes are sick! Love from California
Super cool to see home made project
Nice work boys! Beautiful bike. Lots of work there and you guys nailed it. Let's see some more!
Skateboard trucks rear lights is a great idea!
Sweet build boys 🤙 keep them coming when you can… some real neat ideas in your first build vid
Belo trabalho uma mistura de retro com modernidade
Love the scare board truck idea. Brilliant 🤘🏻🤘🏻
Looks absolutely amazing.
I like that you used a skateboard truck for your rear break and turn signal mounts hahaha
very well edited timelapse, awesome rebuild GG
That’s dope how u used skateboard trucks for the rear signal lights 💪🏾🔥🔥🔥
the truck tailight is sick af
Man wish I had these guys do my bike haha this is art
I am your 10th follower. Don't stop doing this. I love it
Отличная работа! Теперь FMX 650 стал похож на нормальный мотоцикл 👍👍👍
Nice work... skateboard truck, very cool idea!
Great bgm I fell in sleep 10 times during the video.
Love It! Top spanner work guys 😎
Absolutely well done mate! I’ll be back 🤘🏽
Helvetin hieno! Hyvin tehty pojat
Excelente vídeo, excelente trabalho! Me inspirei nisso para fazer minha moto tambem. Parabéns!
Мужики, это очень круто💪 Проделана большая работа
i wish my fmx looked like this
That was so amazing!!!! Thanks boys from Venezuela
absolutely masterpeace nice job with the tal ilght, use skate ruck is epic idea. Keep going i love it.
Thanks!🔥
very very nice build, i loved the skaetboard tail light. very creative and inspirational. Keep it up!
Thanks!
Amazing work
It is very very great bro
This is a beautiful build
La calidad. Espero y dedicación con que : 1) HICIERON ESTE VIDEO. ES ABSOLUTAMENTE ASOMBROSA. 2) MI RESPETO Y APOYO A LOS QUE HICIERON DE ESA MOTO UNA OBRA DE ARTE, LAS scrambles no son mis favoritas pero está se ve súper bonita y bella. Saludos desde Venezuela. Like y nuevo sub. Los felicito. .... The quality. I hope and dedication with which: 1) THEY MADE THIS VIDEO. IT IS ABSOLUTELY AMAZING. 2) MY RESPECT AND SUPPORT TO THOSE WHO MADE THAT MOTORCYCLE A WORK OF ART, THE scrambles are not my favorites but this one looks super pretty and beautiful. Greetings from Venezuela. Like and new sub. I congratulate you.
Loved the results. Nice work. Looks great.
Beauty, little things like tyre white marker matter, still do that on every tyre i buy. And a Von Dutch flying eyeball, it's a tradition for older riders, en zondag poets en peildag🤔
the beast project, I am about to start a similar one, it is a yamaha Rt 180, we are going to transform it into a scrambler. The best proyec 👏🏼👏🏼
love the vibes
Not a bad job guys wish I had friends like you I injoy doing the same iv built a few like this over my time can't beat a Honda
Great work! Cool to see how it all came together, love the skate truck rear end!
So good!
Well done guys, it's a good job, it's well filmed, and the time lapse is well paced.
I have the same project here in France in 2024, I think this fuel tank is perfect for this bike, do you have a link to order it please?
Can you carry a passenger in it? Great job!!!🎉
Nyt on hienoa jälkeä! Näitä lisää. Saa käydä mun kanavan laittamassa seurantaan vlogi tyyliin rakentelen cbr xx:ää aina kun kerkiän. Nyt on ollut pakkaset niin ei tarkene pihalla askarrella niin on ollut taukoa.
Excellent work!! It would be useful to pass the frame as well as the rest of the parts with varnish, the tank and not only. It would be nice for the next project to do a jawa reconstruction.
Incredible congrats
Congrats
Good Job 👍
its beautiful
incredible
this is beautiful work i real like it 😍😍😍
That's a beast 👹
good jop guys...i enjoyed the video as a person who is at the beginnig of the modification proses of my yamaha...
brilliant job. respect.
I just came back to see the really gorgeous seat-tank line.. one of the best scramblers, definitely good stuff.
Beautiful
Belo trabalho, vamos continuar!!!!!
a dream car I must try rebuilding my old car
Parabéns. Conseguiram deixar a moto horrível.
Aivan helveti hieno! Ei voi muuta sanoa. Tajusin videon lopun maisemista ja rekisterikilvestä että mahdatte olla suomalaisia :)
daaamn that tail light on trucks looks cool as fuck! great job!
Perfection bro , but i will like it more if you replace the handlebar with a bracelet handlebars , i think this is a big upgrade for your cafe racer bike , anyway you did a great job there you deserve my subscription and like .
Sick build🤘
Tres beau travaille j'ai beaucoup apris
love it 21 subs 🎉🎉🎉... keep doing it brother 🔥🔥
Do you have a video on how you made that skateboard truck rear brake/ turn light system?
Monstro!.....
beautiful work
Now i know how to make my seat thanks yall lmao i have a gas tank for my xr150 but could find a seat but noe i know to make one nice
Very nice bike! What's the colour number for the fuel tank?
Thanks! Sorry but I have no idea. Candy color depends a lot on the shade of the base color
чуваки. задний фонарь это лучшее из кастомайзинга, что я видел. вы великолепны. спасибо большое
What was the original bike you started out with? Looking to do a similar project
A Honda FMX650(XR650L engine),built in Spain by Montesa,the trials bike people(Honda company)....i'm building an ADV bike out of my one,be put up on here later!
Two faults with the bike,the forks were too long from the factory(front end high,looks like the rear squats), i've had my forks shortened, and very low on power....that's being addressed!
19" f/wheel going on my one,as well as a 25litre fuel/gas tank!
Where do u guys live? looks awesome there
Thanks! We live in Finland🇫🇮
This build is sick. Only small change I would make is to throw that front fender away. Looks out of place to me. Great job guys.
ヤマハTWの太いタイヤを活かしたカフェレーサー改造を夢見た事が有りました、この動画を見てやれば出来ると感じました
Was it a special marker you guys used on the tyres?
Nice 😎
Excelente trabajo bro
pirun hienoo työtä ootte saanu aikaa! Itsekki haluisin joskus myöhemmi rakentaa tämmöse scrambler/cafe raceri isälleni ku se niistä hirveesti tykkää ja tämmöne o iha piru hienoo kattottavaa ku joku oikeesti rakentelee tämmösiä. Aplodit ja hyvää joulua!
Kiitos samoin!
The cylincer is at the weardest spot ever... it'll burn the riders leg.🤣
There is nothing that burns a rider.
Asi voy a ir a que me modifiquen la mia 🤩🤩🤩
I'm your 34th brother plz when your famous don't forget us
Felicitaciones por su trabajo me gusto el estop y las luces de dirección excelente detalle el sensorio de la patineta😉
The fridge is facing the wrong direction....build beers are easily gotten if you spin it round! 😂
Espectacular!
Wow nice idea beuteflye
Nice build 🤩 where are u from guys?
Thanks! We are from Finland 🇫🇮
Hey men! Awesome build, may I know the brand name of that pipe? Tia
Thanks! Pipe is custom made for this bike and you can see the silencer from description