TP-Link R605 Broadband Load Balancer Router Review | Home Gigabite Broadband Load Balaner
HTML-код
- Опубликовано: 8 ноя 2024
- Combine multiple Internet Speed | TP-Link R605+Load Balancer BoadBand router review| Gigabit Multi-WAN load balancer| Increase Internet Speed with load balancer
Many of us are working from home and it is important to have a stable internet connection. If you have multiple internet connections you can connect them to a load balancer so that you will get an uninterrupted internet connection even when one of your broadband connections is down.
After my basic research on the internet, I found this TP-Link ER605 router which I have purchased from Super Computers & Laptops SP road. They are really wonderful people and gave the product for a good price and the overall experience was too good.
Hello Guru, I have bought ER605 to Failover in case of outage in one of the ISP. I have Airtel Airfiber (Internet that comes through SIM) to be used as Secondary and planning to buy BSNL as Primary. When Airtel Airfiber is connected, after few hours internet stops working but WAN is still connected. We then need to go to WAN and Disconnect & Connect for the internet to work again. From the logs I assume that the ISP wants to renew WAN IP address and after that the internet stops working. Is there a way we can recognize this within this device and initiate a Disconnect and Connect?
you can't be serious is that powe cable tightened like a guitar wire?😉.anyway nice video
1) How to keep one wan on standby ?
2) I have 2 ISP bsnl and Airtel, can I use Airtel ftth as well ?
3) can I use the syrotech ftth router to connect the load balancer and connect all the Devices to it ?
Hi, I am not a network expert. Also not an expert who knows much about the packets well. But I believe that you just can't combine two lines to one in this load balancer. It balances the load and also acts as a fail over. so. if the packet has to travel through the internet, it uses one of those channels. To combine those ISPs connection you'll need another device to merge those that's possibly bandwidth bonding and that's possibly expensive.
You are getting 262 pings because you are using two WAN connections. Each of the WAN connections has its own public IP address.
While using these two connections simultaneously the Loadbancer will switch between these two public IPs, hence causing this high ping.
I wish to know with this device can I share the load . What I understand from the video is that the speed of two ISPs become one whereas am looking for a device which can share the client load and both the ISPs are optimally utilized and then have fail safe feature- if one is down the load is shifted to the other one automatically. Am using Linksys LRT224
The lines not get “added” but balanced (the connections) so you could hava a connection at 100mbps and other at 30mbps if you use un speedtest single connection you will get the real speed. Each connection packages go to one ISP the total flow yes will be increased as you have more ways to get internet flow but the real speed of a connection will not surpass the speed of the ISP they are going through
You can have doubled speed but on multiconnection basis
Nice video Guru. I'll get this load balancer and try my luck.
Do you know whati is max switching speed LAN-LAN ?
Want to use it as classic router 1xWAN + 4xLAN and cant find that test nowhere.
Sir, can u please explain/demonstrate how the fail over function works and how much time it takes to switch to secondary wan , when the internet goes down on primary wan under practical conditions e.g by plugging optical input from ur modem (repliciating if the signal to primary modem fails).
Just need to know how much time it takes to shift to secondary wan or it keeps on searching on primary for 2-3 min. and than shifts to secondary.
He’s using it in LoadBalancer mode: both wan connections are used. In backup mode, the switch takes less than 2 seconds. Now, the current connections will drop (if you’re in a zoom call), it will reconnect but bear in mind that the established connections are going to be cut.
Hey you have mentioned everything which is really helpful.. what will happen if we add another wifi router to this device.. do we need to do any configuration?
No ..just add that as wifi repeater
Gr8 video u explain really well can i add switch wifi router in lan port of this load balancer
yes
Is it possible to use both provider at the Same time? for example my sales department will use WAN1 and my HR department use WAN2 then if WAN1 provider will down is it possible that WAN2 provider will step in to give internet to WAN1. How to setup on this way? Pls share thank you
It will switch over the traffic to another automatically. As long as you are not using VPN which is going to take one path any public IP change will disturb the connection. But I tested with my VPN which will get connected to other path in some time.
Should we connect WiFi router to the load balancer router? I see you have connected mobile devices. How can we add ?
Yes, after load balancer you can contact wifi router.
@@gurucp2005 Thank you for the reply, I just ordered R605 from Amazon, Looking forward for merging two ISP.
@@gurucp2005 how can I connect with you. I would like to seek your consultation for the same.
@@devashishjaisingh07 please send me an email at gurucp2005@gmail.com. I will share my number. I do not want to share it here since I might start getting a lot of sales calls :)
Is there any other and cheaper product gigabit swotch for laod balancing/fail over ?
I did not find one in the internet
do i still need to physically unplug the wan port which is down just to activate the failover??
No
Thank you SO MUCH for this detailed video 🧡
Issue is that secure transaction fails if it switches ip in between.
How is that a problem?
@@reklamador27 because money gets debited and transaction gets failed.
can control the bandwith ?
have done the same but still not able to combine the speed infact after combaining it decreses the speed i have er7205
That's called bonding, not balancing or failover. A bonding router is about $1,000+. This is a failover and balancing setup.
Bonding must come from the same provider. There is no way to combine throughput of two different is broadband connections. This is a load balancer meaning it looks at traffic , speed, time ofbthe provided Wan links and choose the optimized one for that session. Two nodes being TVs streaming Netflix. One node is already connected to Wan 1 streaming a high demand 4k movie. Now node 2 connects to Netflix session but the load balancer running a ping or tracers bandwidth % etc gets a reading that Wan 1 is already high demand and thus routs the node 2 session thru the unused currently low demand Wan 2. Not sure what options this balancer allows for figuring demand 9r if it's some sort of algorithm.
Can we plug EP 110ap directly to load balancer
Yes you can
Are you sure it balances on packet level?
it' a load balancer, it won't merge packets, so he will get 100 or 60 not 160.
Thanks for Information sir
I use a gigabit load-balancer for Rs 1500 with openwrt and MI router.
pls explain further... i need the same...
Ping 261 ms but in single ISP maximum it will be 5ms. Please explain the reason if you know.
He is getting 262 pings because he is using two WAN connections. Each of the WAN connections has its own public IP address.
While using these two connections simultaneously the Loadbancer will switch between these two public IPs, hence causing this high ping.
If there is high ping then automatically there will be lag while accessing the site. Is it correct?
@@abhishekkumarchauhan5441 Yes.
Can i get double speed in youtube
I have 2 wan from same isp which one is 20mb and second 15mb
I want in youtube or idm
Not in just speed test
If you configure it active - active mode it will increase overall speed.
@@gurucp2005 but u said in youtube streaming they cant work to gether mean i have 2 15mb connection its cant give me 30mb in youtube
RUclips suggests support.google.com/websearch/answer/6283840 for testing your speed. As per this youtube must use combined speed. We can test the actual utilization of both the WAN interface while streaming from youtube but I have not done that in this video. I will check that and try to make a video about that.
@@gurucp2005 but i have same isp but seprate 2 lines
@@DuckybhainewsfeedYour both the connection will reach the same ISP router IP and youtube will see that IP and you must be getting combined bandwidth.
Super video bro...I am in need of this configuration... In my BSNL Syrotech router I have set the Lan 1 port to Bridge Mode. How do I configure the PPPOE in Tplink omada.. please guide me from where I need to get the password for my PPPOE username. Please help.
BSNL is easy. just update the user details in WAN configuration
Dear Sir, Tell us, How can we Configure TP Link Load Balanacer on double or triple ISP network connection for corporate level works. Actually i am learning stage level. Please help me and upload new video for me.
nothing to do only change the option LAN to a WAN port and insert ISP internet cable to the WAN ports and set network type dynamic\PPPOe
Здравствуйте. Спасибо за обзор. Очень аппаратные различия V1 и V2, прямо тайна какая то, можете рассказать или дайте ссылку где можно узнать. Может у кого из пользователей есть сведения?
Thanks for the video.
I have act and airtel, how to connect cables to loadbalancer and what are things to configure in loadbalancer
RJ45 cable from Airtel and Act should be connected to loadbalancer. After that you need to do few configuration please video you will get to know
@@gurucp2005 TP-Link R605 will need another wifi router to transmit wirelessly, i mean after configuring act/airtel then will it itself play a role of wifi router? or need another wifi router to connect with it ?
@@troyhugs1 You will connect both the internet provider RJ45 to load balancer. After load balancer, you need to have one wifi router.
@@gurucp2005 is there any other Load balancer with Wifi router capability? Please suggest
@@troyhugs1 In India I have not seen anything online.
What about double NAT problem when WAN IS configured in dynamic ip mode
Also can the router have ip like below
192.168.1.1 (1st ISP)
192.168.1.2 (2nd ISP)
192.168.1.3 (tp link load balancer)
192.168.1.4 (access point)
Hi Did not understand this double NAT problem and why do you want to give specific IP to ISP?. Please give me more details about your requirements.
@@gurucp2005 I have changed the default ip of the router provided by isp. Double NAT is the the tp-Link and the isp router will try and assign ip to the same client
This is correct, both the ISP should have different ip. Else it is conflicting right?
PING 261?
i have 2 WAN each 100 Mbps can it make be 200 Mbps
That is one of the reasons to have this sort of setup. But applications like VPN can not utilize full 200mbps as they choose one link for communication.
Rt408t doesn't support lan more than 100mbs
er605 vs r480t me se lonsa better ha
R408 is not gigabit, it supports only 100 mbps
ER605 is way much better..... It's is gigabit and thus, it can be adopted in the Omada Controller.
Hello
ITS HUGE PRICE ARUOND 6999
ping 262 😁