Brother, I have an issue with my TP link load balancer regarding the upload speed, which is half the download speed. I have two ISPs, both of which are 20Mbps. After load balancing, my download speed is 40Mbps, but I am getting an upload speed of 20Mbps. The output upload speed is equal to the upload speed of one ISP. It's TP link Load Balancer R480T+.
not sure if this will help but afaik, putting 2 isp and using load balancing doesn't add up yoru speed, for whatever reason download speed is showing you 40mbps, but you will have to use the so called "bonding" if you want your 2 isp use the 2 ISP together not LB
i have one question actually say suppose your primary and secondary links both are working and primary goes off. then it will take secondary one. but after a while say primary link comes back. will it be on secondary link or will it switch back on the primary one??
I want to have Dual Wal set up as we have 2 ISP's Please guide. Airtel Broadband - ADSL (Static IP) ACT Fibernet If i go with TP Link Multi-WAN VPN Router Omada, will I be able to set up a Dual connection / Load balancing as the same way you did in your Video above. In your video you set it up for one LAN / PC. Anyhow for my case, i will be connecting the LAN to Switch and thru Switch i will have about 15 PCs connected.
i have 2 connections from same ISP and i am using 2 routers (huawei E5172) to connect to r470. but not attained bonding. any guidance would be appreciated
sir agar main internet download manager me youtube video downlaod karu toh muze speed jada milegi i mean combine speed experience milega 10mb+10mb=20mb?
Since the Router is fully wired how do you open the tp link site the first to configure the ip address of WAN. Also i would like to know can i simply use this TP Link Load Balancer with only one WAN cable as a replacement for my existing wifi router.
There is no parameter to increase or decrease failover. The other thing you can do is to leave both lines configures and run them in a Load Balanced way. #EduPathshala
Thanks for this, planning to install 2nd ISP on my work, im not familiar yet with all the configuration but i believed everything was already shown in the video. Great new subs here.
@@kottakkalIT load balance router will only act as switch for isp 1 &2 but to bond to isp u need a internet bonding aggregator device which need to have configuration with data centre dont give false information
change your title name or put word tp link loadbalancing router configuration this line is most use while searching load balancing router configuration so put this line in your description to get more traffic
Saludos, tengo un balanceador modelo 480t+ con fireware 9.0 y quiero entrarle internet con un cable de red conectado por Lan de un repetidor que tengo en casa configurado en modo WIPS, (este repetidor recibe internet desde mi otra casa) para poder controlar el ancho de banda de los equipos conectados a ese repetidor, agradezco sobremanera que me puedan ayudar, aclaro que no quiero hacer balanceo de cargas SINO CONTROLAR ANCHO DE BANDA A LOS EQUIPO CONECTADOS POR WIFI A MI REPETIDOR
i have the load balancer problem facing by me is that we have like 3 wan connections now from different ISP how to know which one is not working also its not combining the speed
So its not that much useful for Online Gaming,Video streaming, Video Callling etc which needs concurrent network because when theres a 10 second disconnect.. you get LOGGED OUT of the network/match.. u need to relogin and connect to them.
Aap ne accha samjhya
Ini bisa menggabungkan 2 isp?
Brother, I have an issue with my TP link load balancer regarding the upload speed, which is half the download speed. I have two ISPs, both of which are 20Mbps. After load balancing, my download speed is 40Mbps, but I am getting an upload speed of 20Mbps. The output upload speed is equal to the upload speed of one ISP.
It's TP link Load Balancer R480T+.
not sure if this will help but afaik, putting 2 isp and using load balancing doesn't add up yoru speed, for whatever reason download speed is showing you 40mbps, but you will have to use the so called "bonding" if you want your 2 isp use the 2 ISP together not LB
Is it possible for the TL r470+ to have more than 2 ISPs?
Yes it's possible
TL-SG108E 2 ISP ek network mein chalega kya nahin
i have one question actually
say suppose your primary and secondary links both are working and primary goes off.
then it will take secondary one. but after a while say primary link comes back.
will it be on secondary link or will it switch back on the primary one??
proably shift to the connection with the highest speed i suppose
I want to have Dual Wal set up as we have 2 ISP's Please guide.
Airtel Broadband - ADSL (Static IP)
ACT Fibernet
If i go with TP Link Multi-WAN VPN Router Omada, will I be able to set up a Dual connection / Load balancing as the same way you did in your Video above.
In your video you set it up for one LAN / PC. Anyhow for my case, i will be connecting the LAN to Switch and thru Switch i will have about 15 PCs connected.
I have only one computer
you can connect switch no problem both are same
Sir is okay both wan 1 and wan 2 is dhcp?
Yes
i have 2 connections from same ISP and i am using 2 routers (huawei E5172) to connect to r470. but not attained bonding. any guidance would be appreciated
sir agar main internet download manager me youtube video downlaod karu toh muze speed jada milegi i mean combine speed experience milega 10mb+10mb=20mb?
Well, at times this may change
@@kottakkalIT it will work or not?
Work
Since the Router is fully wired how do you open the tp link site the first to configure the ip address of WAN. Also i would like to know can i simply use this TP Link Load Balancer with only one WAN cable as a replacement for my existing wifi router.
Is there anyway to decreate failover time? 10 seconds is too long
There is no parameter to increase or decrease failover. The other thing you can do is to leave both lines configures and run them in a Load Balanced way. #EduPathshala
Can we reduce the fail safe switch over time frame ? Say I disconnect lan1 and it instantly picks lan 2 with no paket loss ?
It can if you configure them in Load Balancer configuration instead of Failover config. #EduPathshala
@@EveryPaisaMatters how can I configure them in load balancer not in fail over you have a video please?
Thanks for this, planning to install 2nd ISP on my work, im not familiar yet with all the configuration but i believed everything was already shown in the video. Great new subs here.
will it failover back to wan1 in case wan1 goes up?
How many computers units can be handle by this?
15
hi should i change my dhcp dns address or per wan dns change only?
please change isp recommended DNS
Does this have a feature of combining the bandwidth of the two isps to give one larger pipe?
Yes
@@kottakkalIT That means it can do channel bonding ?
@@kottakkalIT load balance router will only act as switch for isp 1 &2 but to bond to isp u need a internet bonding aggregator device which need to have configuration with data centre dont give false information
No its is just a switch u need a agreetkator box which In india is not available
@@karankohli6700 no
change your title name or put word tp link loadbalancing router configuration this line is most use while searching load balancing router configuration so put this line in your description to get more traffic
Is it increase the speed of internet
Yas
Saludos, tengo un balanceador modelo 480t+ con fireware 9.0 y quiero entrarle internet con un cable de red conectado por Lan de un repetidor que tengo en casa configurado en modo WIPS, (este repetidor recibe internet desde mi otra casa) para poder controlar el ancho de banda de los equipos conectados a ese repetidor, agradezco sobremanera que me puedan ayudar, aclaro que no quiero hacer balanceo de cargas SINO CONTROLAR ANCHO DE BANDA A LOS EQUIPO CONECTADOS POR WIFI A MI REPETIDOR
I configured the same n checked on fail over but when not getting combined speed when checked on load balancer n bandwidth control, what's the issue?
Definitely I help you
Plese send Your load balancer model number
And famware version
Do i really need to set the other wan to static or DHCP is fine?
Static is the better
is this wireless as well? I need my mobile to get wifi as well...
Yes
No it's not.
how about the ping does improves it?i have one wisp and a dsl connection will it going to work?
yes it should work dsl connection
ping is depending on your gateway if you are using fiber connection you get a good latency in public dns for example google dns
So does it mean that is going to benefit me?
What is fail over time taken to move traffic from wan 1 to wan 2 ?
It's approximately 5 timeouts 5 seconds
Do i have to config my isp 1 to wan 1 ? Or the isp 2 only?
YES
4 ISP
Hello, how do I know the ip range? Im planning to do static setup. thank you
i have the load balancer problem facing by me is that we have like 3 wan connections now from different ISP how to know which one is not working also its not combining the speed
Please try to ping test in diagnostic option
@@kottakkalIT ping which ip
load balance and failover right?
Yes, this one does both. #EduPathshala
my link failover is not working any idea why??
So its not that much useful for Online Gaming,Video streaming, Video Callling etc which needs concurrent network because when theres a 10 second disconnect.. you get LOGGED OUT of the network/match.. u need to relogin and connect to them.
hi there , how clients in network can connect wirelessly ?thnx
Hide ip for what purpose… no one need your ip 😂
If i want make wan 1 or wan 2 make the live how to do it inthe load balancer..
Thanks for your video. Where can we find the configuration in Wan 1?
Is there a way to avaoid the request time out during failover ?
I think no it's maximum 5 ping lose time out it's basic divice
@@kottakkalIT even if I configure the 2 lines to load balancing mood , there will be 5 request time out ?
thanks Man, so nice video.
easy to understand becaouse with demonstration.
simple config.
auto subscribe
Thanks brother
its a good low end load balance , no support for ipv6, 10base-T and a max of cat5e ave 100m, no Gigbit Lan,GG
Buy 480t
600VPN I think has Gigabit
is true that the two internet connections will merged?
Yes You Can Manage Two Wan in one device...Know about more .
you need cable managements huge cables hhhhhhhh😁
Hhh it's just for testing
How to check wan 1 consumption of data history..
The least menu managment option
Bhai Video not clear
Please adjust that
Sorry brother
Why mute what for?
better listen for relaxing music than watched ur video
ok thanks bro
This man i think from india
yes brother
How access Loadbalancer from outside of network
Use public ip
i dont understand anyting baout the ips1 configuration....hahahhahaa
Irritating bgm stop that.. please
Bhai kucch to Explain to Karo
Surely
balit po ba tinatakpan ang ip address e private addresses naman yang gamit mo hindi public IP. hahahha
it just never connects. can i get your email?
Kottakkalit@gmail.com
Block aplicacion
idk what configuration in wan 1
Wan 1 is isp1