Vídeo 100% didático quem seguir esse passo a passo vai ter Failover em funcionamento total!! Parabéns continue meu amigo com seus vídeos sobre este modelo de roteador!! Traga vídeos de configuração sobre algumas VPN disponível neste modelo OPEN VPN e Wireguard
Thanks for the walkthrough. I have the same exact router. While the failover works, it doesn't revert back to the primary WAN when it comes back online. Any suggestions or pointers, would be really helpful! Thanks!
In Transmission \ Load Balancing \ Online detection - why cant both be online. I have lines from 2 ISP's (WAN and WAN \LAN 1) I want the router to combine those 2 WAN and WAN \LAN1 so if the one is WAN is 1000 \ 1000mbs and WAN\LAN1 is 500\ 500 mbs ==== so when i do a speed test i was expecting the speed to be 1500 \ 1500 mbps but is it not, it still only 1000 \ 1000 mbs. Can you advise please
Seems such a waste for the Backup WAN only being utilized when the Primary WAN gets disconnected. Wishing the ER605 unit has WAN Link Aggregation feature wherein it can use all connected WANs at the same time. If any connection fails, the total bandwidth just gets reduced and Internet access still continually works as long as there is still one WAN connection working.
I am using ER605 with dual wan configuration. All i can see is at the connection level WAN aggregation is happening and load balancing. I have two WAN one with 380 Mbps and Other 120 Mbps. At any single connection max speed that i am getting during speed test is 380 Mbps (Primary WAN MAX). When you open multiple connections and do the speed test the combined bandwidth is around 480 Mbps, so i can confirm both the WAN is actively used during high load.
@@wlan0 If you are talking about Link aggregation group or link aggregation control protocol, there is nothing in ER605. When you check speed test, the system creates multiple application link with the speed testing server (nearly 8) and then takes the average speed.Example, when you connect 2 WAN port with ER605 router, 4 application layer link will establish with WAN1 and 4 link with WAN2 server for speed test. When takes average, you feel speed is aggregated.Actually LAG feature not in this ER605 due to its CPU limitation.
@Wirenetwork If i add backup link in the backup link menu, WAN1 shows as link down in the online detection menu. If i disable ut link 1 shows as linkup
@@Wirenetwork ok but I don't know what value to enter as static IP in both interfaces. I know the default gateway, but which IP address should I put for WAN1? (gatway 192.168.178.1) And which IP address should I put for WAN2? (the one with gateway 192.168.1.1)
I regret updating my router, all I want is to combined 2 ISP. That feature is lost, now only 1 ISP is working the other is on stanby, help me sir, should I downgrade the router version?
@wirenetwork...I have 2 broadband connection of Same Isp those are 1000Mbps and 300Mbps, I have connected 1Gbps connection in to Primary wan of Er605 omada router and 300 Mbps for wan2 interface...both have configured pppoe mode ...and 2 lan ports of er605 router connected to 24 port gigabit tp link switch respectively, from the switch through CAT6 cable I have connected 23 routers from 24 port switch Giga bit all ther routers which connected from Switch is configured as router modem with different management ip.....but the result am getting that it's that no internet, when I remove from switch to er605 router it will start working ....pls help me on this issue which am facing
Vídeo 100% didático quem seguir esse passo a passo vai ter Failover em funcionamento total!! Parabéns continue meu amigo com seus vídeos sobre este modelo de roteador!! Traga vídeos de configuração sobre algumas VPN disponível neste modelo OPEN VPN e Wireguard
Thanks for the walkthrough. I have the same exact router. While the failover works, it doesn't revert back to the primary WAN when it comes back online. Any suggestions or pointers, would be really helpful!
Thanks!
I experienced the same thing, does anyone know why? Thank you
Thank you sir. Very instructive. Can I ask why would you choose to manually setup the fail over check , instead of automatically?
Whether you keep the fail over check manual or automatic, it will not make any difference.
@@Wirenetwork thank you. One last question. What it would be the difference if I do not enable load balancing?
Vídeo muito bom, prático e bem didático 👍
Thanks
In Transmission \ Load Balancing \ Online detection - why cant both be online.
I have lines from 2 ISP's (WAN and WAN \LAN 1)
I want the router to combine those 2 WAN and WAN \LAN1 so if the one is WAN is 1000 \ 1000mbs and WAN\LAN1 is 500\ 500 mbs ==== so when i do a speed test i was expecting the speed to be 1500 \ 1500 mbps but is it not, it still only 1000 \ 1000 mbs.
Can you advise please
Seems such a waste for the Backup WAN only being utilized when the Primary WAN gets disconnected. Wishing the ER605 unit has WAN Link Aggregation feature wherein it can use all connected WANs at the same time. If any connection fails, the total bandwidth just gets reduced and Internet access still continually works as long as there is still one WAN connection working.
I am using ER605 with dual wan configuration. All i can see is at the connection level WAN aggregation is happening and load balancing. I have two WAN one with 380 Mbps and Other 120 Mbps. At any single connection max speed that i am getting during speed test is 380 Mbps (Primary WAN MAX). When you open multiple connections and do the speed test the combined bandwidth is around 480 Mbps, so i can confirm both the WAN is actively used during high load.
How to use both wan at same time, I have same router to link er605,
Did u get solution?@@thakkardushyant
@@wlan0 If you are talking about Link aggregation group or link aggregation control protocol, there is nothing in ER605. When you check speed test, the system creates multiple application link with the speed testing server (nearly 8) and then takes the average speed.Example, when you connect 2 WAN port with ER605 router, 4 application layer link will establish with WAN1 and 4 link with WAN2 server for speed test. When takes average, you feel speed is aggregated.Actually LAG feature not in this ER605 due to its CPU limitation.
Static ip configuration is working but dynamic ip is not work how I will configure dynamic ip or PPOE (DSL) mode......
Bro, I am using tplink TL-R470T+ v6.0. If i add the Link Backup rule WAN1 connection dropped. How to solve it?.
???
@Wirenetwork If i add backup link in the backup link menu, WAN1 shows as link down in the online detection menu. If i disable ut link 1 shows as linkup
This type of load balancer dynamic ip configuration possible???.....
Once possible plz explain the steps
I will upload video on it..
Thank You , well explained.
You are welcome!
I have a connection with gateway 192.168.178.1 and another connection with gateway 192.168.1.1. What should I put as IP address in WAN1 and WAN2?
Configure Primary Internet connection as wan1 & configure your back up internet connection as wan2
@@Wirenetwork ok but I don't know what value to enter as static IP in both interfaces. I know the default gateway, but which IP address should I put for WAN1? (gatway 192.168.178.1) And which IP address should I put for WAN2? (the one with gateway 192.168.1.1)
call your isp for know your wan ip addresses
@@Wirenetwork both ISP provide a dynamic IP...
Then you configure WAN1 and WAN 2 as dynamic IP address
Can we use pppoe instead of static ip
Yes
Bro pls upload 3wan link and loading balancing on 3wan port
I regret updating my router, all I want is to combined 2 ISP. That feature is lost, now only 1 ISP is working the other is on stanby, help me sir, should I downgrade the router version?
I will make video on it.
Thanks
Welcome
It took 5 seconds to switch to other link. If you are a CSR this doesn't help you. your call has dropped. Spedify is better than this
Did this router works on 2 or 3 wan in to single lan with all combine speed?
I have try this idea, 2 Dynamic WAN bandwidth aggregation works but sometimes it not work properly.
@@Wirenetwork what if i have same isp with 50mb and 50mb of 2 connections
Did this router then give me 100mb output?
@@Wirenetwork sir teach us how :)
How do I add up the 2 wan speed, what configuration
@wirenetwork...I have 2 broadband connection of Same Isp those are 1000Mbps and 300Mbps, I have connected 1Gbps connection in to Primary wan of Er605 omada router and 300 Mbps for wan2 interface...both have configured pppoe mode ...and 2 lan ports of er605 router connected to 24 port gigabit tp link switch respectively, from the switch through CAT6 cable I have connected 23 routers from 24 port switch
Giga bit all ther routers which connected from Switch is configured as router modem with different management ip.....but the result am getting that it's that no internet, when I remove from switch to er605 router it will start working ....pls help me on this issue which am facing
did the booting take too long? hahahhaa, i wait for around 3-5 minutes i guess😂😂😂
Yes its very alow device. Not suitable for business use. Load balancer or not fast switching
Mines took 3 business days 😂
yes, it will take minimum 5 minutes 😀
Sir i have a question.is TP Link ER605 safe for using to Starlink?
Not at 100%
@@Wirenetwork Does this mean the SL connection slows down? I can't get my SL to run at full speed in bridge mode using the ER05 router.
@bobnease2 how much speed??