It's been about 3 or 4 years since I've looked at resin printers (I landed on getting the Mars 2), and the leaps and bounds that the Saturn 4 has done at that price point is incredible. I am truly amazed.
The speeds on this are insane and it doesn't look like much compared to the Saturn 3 Ultra, but as you said, when you consider this is using PFA film rather than ACF, you don't loose detail, so WOW! WOW! WOW! WOW!
This looks like the one to buy. The amount of fiddling and settings adjustments I've seen with these various printers has been what's been holding me back. Never underestimate the pull of something that 'just works'
Yes!! You're the ONLY person doing who's gonna be doing a video on the standard Saturn 4. It's kinda a bummer no one else is doing videos on the regular Saturn 4. I'm a bit worried about the tilting vat breaking and the cost that will incur so I opted for the regular Saturn 4 (and the green is so nice) and I just wanna know
@@clanggedin Did you know that it is a common occurrence for companies to sell advertisers, such as RUclipsrs, early launch versions of their products? It's as if you don't even know how the Internet works, champ...
I literally *just* sold my resin printer because I hated the mess, but if I hadn't already tried resin printing, this would definitely convince me to try it. *So* much easier than mine was... Except that you still have to deal with all the mess and fumes. I don't imagine they'll ever "fix" that, though.
@@lanzer22 I do it in the apartment, but I use wax resin for jewelry casting, I don't smell any fumes when it's closed and I have a VOC monitor and it also don't detect any fumes when printing.
Bed leveling has always been my main issue (that and resin spilling)😅 This is amazing and I'll definitely have to grab this printer! Uncle Jessy never disappoints with these videos!
It would be cool if you showed a more detailed guide of how you clean and postprocess your prints, since the whole tray can't fit into the wash and cure station.
My only hesitation is the build plate. If resin gets inside the hollow portion and the spring mechanism start getting stuck, having to take it apart and cleaning it will be a pain. This build plate is a great candidate for a magnetic build plate. Too bad they generally don't work well for large format printers.
@lanzer22 because of the plate design I think you can squeeze several strong magnets in between the plates and make it work. If you get strong enough magnets it will probably hold the metal plate, because the tilting bed will have way less suction resistance.. if anything you could probably design a plate with holes for magnets and glue them into a small thin retainer upper resin print. I plan on using my cnc and making an additional plate hopefully that will have some sunken magnets. Can't wait for them to ship it!
@@newmonengineering true that there will be less pull force on the plate. Will definitely experiment with different magnets to see what works. There is a lot of room above the plate for resin clearance so we can put some hefty magnets in there. Though cleaning in between resins would be nasty if I put too many magnets everywhere
I run my prints through two washes, two different machines. I use the Gktwo in the winter because it has a vat heater. And my elegoo in the summer. I use the elegoo wash station for the initial wash and the Gktwo cleaner, which is far superior because it's hydro sonic. Two washes are best IMHO.
1:09 THANK YOU for specifying what number was the vertical axis. i couldn't find any info on it so i set them both to 218. figured losing 2mm was better than guessing.
Crazy how quickly new machines are coming out. I bought the Saturn 2 around this time last year and that was the latest machine out - now it's deemed 'old'!
Hi there Clayton! OMG, I wish the Ultra had the green lid - it looks stunning! So much cooler! And…. bib bib bib! Yeah! I love the Bib 🤣 Please, forgive us who started bibbbing in your Live Stream - which always feel like a fun party to be in 🤷♂️ You’re the man!
As a seller of models I was a bit iffy on the lower build height limit as I have a few models which are exceptionally tall. But hearing all of this this sounds like a brilliant addition to my fleet. Now if only I had more space.
I am new to 3D Resin printing. However, I've watched many videos on many different 3D resin printers. This is my top pick if I decide to purchase. Thank you.
My Sat 4 Ultra is sat in the box ready to be set up this weekend. So far only played with FDM (3xBambu A1, Elegoo Neptune 4 & 4 Max) so excited to try resin (and scared). This video had some great information to get me going.
I think the tilting Vat is gonna solve so much with print release issues and I wouldn’t be surprised if it extends FEP life between replacements as well
I got started resin printing with the original Saturn. Now I have a pair of Saturn 2 printers that have performed almost flawlessly. Looking forward to getting the Saturn 4 Ultra.
I have a Saturn 2 and really like it. I am not ready to upgrade as it works and I have other things I can spend $400 on. However after seeing this I was tempted. They addressed almost all my issues I had to overcome with the Saturn 2, short of making the build plate even bigger.
Every new feature about this printer is an improvement on something that users had complained about with the Saturn 3 line. I'm so glad that Elegoo is not only listening to the feedback that they recieve, but also copying from competitors who are doing the things that printers love.
Great video!!I have to say this is one simple to use resin printer! Pretty much just slice and print. Yeah, I might have overlooked where the drip tray was in the packaging 🤔. I might have had someone in this video help me locate it during my unboxing 😂
If the settings for speed are no longer important, then how do you set up this printer in your slicer? Like lychee for instance? Does the printer ignores those settings and asks you to select fast mode or slow mode locally before every print?
At 10:50 you can clearly see that the Saturn 3-print has MUCH more details than the Saturn 4-print. The eyebrows and the wrinkle between them are almost invisible on the Saturn 4-print. Also the armor shows much more details on the S3-print. Did you print on the S4 with the High Speed-setting or why has the S4-print such a low quality? Even my old 4k-Elegoo Saturn shows more details.
Hopefully you can still go in and adjust the speed, lift and lower settings in the slicer? Auto calibration is nice and all, but different resins and even different models can require different settings and you need to be able to adjust those on a print-by-print basis. Excited to see the power resume function. That actually seems like something new that Elegoo figured out on their own, instead of just copying the competition. I wonder if it would work better with the heater installed, so the resin isn't cooling while idle? There are questions though. What's with the plate design with the long standoffs allowing resin to pool on top of the plate in an inaccessible space? And a hollow build plate that collects liquid inside and drips it out at random, seems like a recipe for disaster. The portrait orientation touch screen? Why? And it's great that the error calibration detects cured resin floating in the vat but if it still ends up puncturing the FEP, it sounds like they need to calibrate that feature better.
I'm waiting for Black Friday to purchase a Saturn 4 Ultra with the optional heater for consistent results for production. I'll 3D print a knob so I can raise and lower the lid with one hand. Resin smeared on an acrylic lid looks like hell. 5:55 - It looks like I'm going to need to create a separate WiFi network for my 3D printers that is air gapped from the internet. I don't like giving internet access to various devices. I don't like the potential for spying (looking at you Big Bambu) but these devices also represent significant privacy and security risks. The printer has a camera. Do you really want that exposed to the entire internet? Who knows what open ports in a 3D printer could be exploited to gain remote access to my WiFi network and all connected devices? I love WiFi enabled printing from the slicer but the security and privacy concerns make that look like a bad decision.
“I’m a man who likes to work on my prints, I like to take them apart and put them back together. Why Elegoo? They have a printer that works, then there’s this flip top box. I like things that are well designed, this box is interesting and practical. New Saturn, quality, speed, flip top box, popular printer price.” All jokes aside I really like that design. I’ve scratched the hell out of my Mono X’s lid on the Z axis taking it off frequently. If I was in the market for a new printer I’d probably be a buyer, but I think I’ll hold off for the 5 and see if they incorporate a heater into that design since that’s my only true issue with resin printing here is I do it all in a cool basement.
Ordered mine, can't wait for it to arrive. Should be a nice upgrade from my OG Saturn. What size is the vent circle in the back of the printer? I want to set up an exhaust system for it.
I am in the exact same case and excitation state! I'm currently designing a custom exhaust system too. I managed to run a ⌀40mm PVC pipe vertically down the inside of the drywall of my workshop, as the air extraction unit happens to be located in the attic just vertically from this non-load-bearing wall. The pipe inlet emerges into the room next to where the printer will be, via a 90° elbow passing through a dummy socket cover. It connects through a custom iris shutter mechanism that I'm currently designing, that will allow me to control the amount of air being sucked in, or totally stop the extraction. I decided to use a cheap Chinese replica of a Dyson vacuum hose to connect the printer to this wall "air socket" due to the convenient quick release mechanism. I might add a small activated carbon filter (easy to replace) in order to keep the pipe and the extractor fan in the attic as clean as possible over time (I dunno it this is overkill or not? wrt resin VOCs). If I like the final setup, I'll share it on Printables :)
Vat tilt during print (and the bib) is a feature of the Prusa SL1S, surprised to see it here, wonder who owns the patent and if it was leased or if Prusa had kept it available for the industry.
The venom and skull look awesome I'm new to resin printing looking 4 my 1st printer was looking at a GKTWO but think this is a better choise thank you 👍
Great video, bought one right after watching this video.Great pricing $399 for printer itself but I went for combo with the Mercury XS wash and cure stations for $579. Would have went for the combo with the air purifier but there was not a lot of information on the air purifier and as this is my first resin printer I need the wash and cure. Would love to see a video on the Air purifier and heater from you.
this would literally be the perfect starter printer for anyone. Auto levelling and auto resin calibration is crazy. The AI camera is such a good addition too. Ill just have to save for a few years 🥲
Jessie, I bought one of these and an extra plate and returned both of them because the "auto-leveling" feature stopped working after a few prints. How did you deal with this as it's a common known problem according to Elegoo?
the space i have is very limited, but i really want a resin printer for my 3D models i make, but im wondering how bad are the fumes from a resin printer, like can i have it sitting in my bedroom and it will stink out the place with fumes or can i use it the same as a FDM printer with a little more clean up effort ?
I don't think the 'Emergency' stop function should be any deeper than the live front screen when printing. I also fear the tilting vat may, mechanically speaking, end up being more hassle than bonus. Did the autosense 'prevent' an accident by piercing the fep with a piece of debris, thus causing the same accident ? 🤔
The only question I have for you is what the different heights are for the various models. You give us time, but I want to know the realistic mm/h numbers
Hey, do you have any advice for my problem with the Saturn 4Ultra? My prints are so difficult to remove from the build plate that I almost need a hammer 😂. Warm water helps, but I’d prefer not to have to submerge the entire plate every time.
Green cover kicks arse! (do not like the charcoal translucent at all) I wonder how much the green cover is.. or of you can order the 4 Ultra with a green cover? Definitely needs a heater!
Hey im reallky thinkin to starting with 3d printing and thbat would be my first so my question is do i really need all this extra stuff like the heater the washing station and co or can i just start with only getting the printer?
Saturn 2 screen went bye bye so I have been debating upgrading or spending the $100+ for the screen. Saturn 4 Ultra looks so nice and easy. How easy is it to replace the screen? I think the Saturn 2 is insane with having to take the whole thing apart.
Hey Uncle Jessy, I preordered the Saturn 4 Ultra and once I got it I set it up and it didn’t print anything on my first attempt…I haven’t tried anything else yet. I’m actually waiting to get some tips form some of you might be able to provide me.
I just ran my first print and it said it was running but I checked back 2 + hours later when it said the job was done and there was nothing on the print plate. Any ideas or tips on how to troubleshoot? I'm brand new to 3D printing
I want to see that heater review before I decide if I want to get back into resin printing with this. My Saturn 2 broke me and I haven't looked at it in almost a year. But before I decide anything, I want to see if that heater works.
And the one question I still have is..... does resin printing still smell the whole house up? I tried to get into it, and bought one of the older Saturn's some time ago. The smell gave me headaches, and I had to get rid of it.
so you refered to this as auto leveling, fauxhammer goes pretty hard on that being a missnomer, whats your thoughts on that, does it actualy level the plate with the screen?
Thanks for the video. Unfirtunaly my satunr 3 Ultra just died and i am looking now for a new printer. I have some questions: Because of the way the print bet is now is ther enot a lot of wasted resin ? By the look of it you cant really reach the top of the printbet the get to the access resin. Another question is if there are still slot for the airpurifier that where part of the satunr 3 ultra. The third question is if there is again the possibility to stuck the printbet vertical in place so that the access resin can drip down into the tank(i really missed this on the S3U.Thanks in advance for the answer.
the green acrylic look on the saturn 4 makes me want to get into resin printing. If i was already into resin printing, i woudlnt get the Ultra, just cuz of the color options. Who needs a tilting tray when you can have a magnificent green machine
I wonder if the LCD-Displays are now better than the ones from the Ultra 3. I bought mine Ultra 3 last September and I already had to replace the display 4 times! If the Ultra4 would come with a 11" or 12" display and with a resin bed heater I would buy it immediately. Waiting for the Ultra5 or a product from another manufacturer
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Wow, this is making me want to get back into resin printing. This fixes 90% of the issues I had with using my Saturn 2. Thanks for the video!
No joke this takes away a lot of the headaches people have with it.
I am in the same boat - Have a S2 - Just preordered the S4U
Same here! Looks awesome
What problems did yall have. Been using my Saturn 2 since release and could not be happier
Huge opportunity missed by not adding a heated vat. It would have been perfect...
It's been about 3 or 4 years since I've looked at resin printers (I landed on getting the Mars 2), and the leaps and bounds that the Saturn 4 has done at that price point is incredible. I am truly amazed.
The speeds on this are insane and it doesn't look like much compared to the Saturn 3 Ultra, but as you said, when you consider this is using PFA film rather than ACF, you don't loose detail, so WOW! WOW! WOW! WOW!
"fox hammer" lol. Jesse, say it like "foe".
@@nobirdsnomasters he knows, he's doing it on purpose!
@@FauxHammer We pronounce it as Dolphin not Porpoise - LUL
😂😂
FoeHammer for the win 😂
Give the editor a raise. That split at the intro was great!
Thanks!! Was a fun one to cut together
This looks like the one to buy. The amount of fiddling and settings adjustments I've seen with these various printers has been what's been holding me back. Never underestimate the pull of something that 'just works'
That intro evolution was A+. Chef’s kiss
Yes!! You're the ONLY person doing who's gonna be doing a video on the standard Saturn 4. It's kinda a bummer no one else is doing videos on the regular Saturn 4. I'm a bit worried about the tilting vat breaking and the cost that will incur so I opted for the regular Saturn 4 (and the green is so nice) and I just wanna know
A quick search shows over 60 videos as old as 11 months.
Did you even look?
@@Atmatan Um. The Saturn 4 isn't even out yet bro. How could there be 60 videos on it and 11 months old? Did you even look?
@@clanggedin Did you know that it is a common occurrence for companies to sell advertisers, such as RUclipsrs, early launch versions of their products?
It's as if you don't even know how the Internet works, champ...
@@AtmatanCan you please provide one reviewer who has a review of the Saturn 4 that’s 11 months old? Just one.
@@dmonty2k Does your search bar not work?
I literally *just* sold my resin printer because I hated the mess, but if I hadn't already tried resin printing, this would definitely convince me to try it. *So* much easier than mine was... Except that you still have to deal with all the mess and fumes. I don't imagine they'll ever "fix" that, though.
Resin printing is definitely a "garage" hobby. I can't imagine doing it in the house.
@@lanzer22 I do it in the apartment, but I use wax resin for jewelry casting, I don't smell any fumes when it's closed and I have a VOC monitor and it also don't detect any fumes when printing.
The newer water washable resins makes the mess so much less and so simple to clean up models after printing. It was a game changer for me.
Bed leveling has always been my main issue (that and resin spilling)😅 This is amazing and I'll definitely have to grab this printer! Uncle Jessy never disappoints with these videos!
It would be cool if you showed a more detailed guide of how you clean and postprocess your prints, since the whole tray can't fit into the wash and cure station.
Look at his previous videos, he’s done a few already
My only hesitation is the build plate. If resin gets inside the hollow portion and the spring mechanism start getting stuck, having to take it apart and cleaning it will be a pain.
This build plate is a great candidate for a magnetic build plate. Too bad they generally don't work well for large format printers.
@lanzer22 because of the plate design I think you can squeeze several strong magnets in between the plates and make it work. If you get strong enough magnets it will probably hold the metal plate, because the tilting bed will have way less suction resistance.. if anything you could probably design a plate with holes for magnets and glue them into a small thin retainer upper resin print. I plan on using my cnc and making an additional plate hopefully that will have some sunken magnets. Can't wait for them to ship it!
@@newmonengineering true that there will be less pull force on the plate. Will definitely experiment with different magnets to see what works. There is a lot of room above the plate for resin clearance so we can put some hefty magnets in there. Though cleaning in between resins would be nasty if I put too many magnets everywhere
I run my prints through two washes, two different machines. I use the Gktwo in the winter because it has a vat heater. And my elegoo in the summer. I use the elegoo wash station for the initial wash and the Gktwo cleaner, which is far superior because it's hydro sonic. Two washes are best IMHO.
1:09 THANK YOU for specifying what number was the vertical axis. i couldn't find any info on it so i set them both to 218. figured losing 2mm was better than guessing.
Crazy how quickly new machines are coming out. I bought the Saturn 2 around this time last year and that was the latest machine out - now it's deemed 'old'!
At this point every spring elegoo is releasing some form of an update to the Saturns
Definitely excited for the print settings from this one, as I do a TON of batch printing, and the faster that can happen the better.
A bunch of profiles going up today! Saturn 4 Ultra, Update to my Saturn 3 Ultra, a bunch of FDM Printer profile updates
@@UncleJessy Did this ever go up? I grabbed your patreon just for these and they don't appear to be updated.
Hi there Clayton! OMG, I wish the Ultra had the green lid - it looks stunning! So much cooler! And…. bib bib bib! Yeah! I love the Bib 🤣 Please, forgive us who started bibbbing in your Live Stream - which always feel like a fun party to be in 🤷♂️ You’re the man!
Packed away my saturn s after all the faff! Really love resin printing. I hope this one is as good as it seems! Will be game changing!
As a seller of models I was a bit iffy on the lower build height limit as I have a few models which are exceptionally tall. But hearing all of this this sounds like a brilliant addition to my fleet. Now if only I had more space.
Really liked having the tilting vat in the Prusa SL1, glad to see it's in more affordable printers now
i love your videos SO much!! so helpful!! rewatching them, because such great info !!!
I am new to 3D Resin printing. However, I've watched many videos on many different 3D resin printers. This is my top pick if I decide to purchase. Thank you.
Yo Jessy! I Appreciate this video, man!
My Sat 4 Ultra is sat in the box ready to be set up this weekend. So far only played with FDM (3xBambu A1, Elegoo Neptune 4 & 4 Max) so excited to try resin (and scared). This video had some great information to get me going.
I think the tilting Vat is gonna solve so much with print release issues and I wouldn’t be surprised if it extends FEP life between replacements as well
I am excited to see the resin tray has a pour spout corner. Such a simple yet significant addition.
I got started resin printing with the original Saturn. Now I have a pair of Saturn 2 printers that have performed almost flawlessly. Looking forward to getting the Saturn 4 Ultra.
I have a Saturn 2 and really like it. I am not ready to upgrade as it works and I have other things I can spend $400 on. However after seeing this I was tempted. They addressed almost all my issues I had to overcome with the Saturn 2, short of making the build plate even bigger.
Saving money to order one of these soon. This looks amazing for the price range and features.
I preordered mine and can't wait to get back into the hobby. Thanks for the info!
Every new feature about this printer is an improvement on something that users had complained about with the Saturn 3 line. I'm so glad that Elegoo is not only listening to the feedback that they recieve, but also copying from competitors who are doing the things that printers love.
I started with a Anycubic Mono 2. I ordered a Saturn 4 Ultra today.
Great video as always! We're working on integrating WiFi and camera features to make them available as soon as possible 😊
that was a pretty cool intro where it cycles through the different iterations
Great video!!I have to say this is one simple to use resin printer! Pretty much just slice and print. Yeah, I might have overlooked where the drip tray was in the packaging 🤔. I might have had someone in this video help me locate it during my unboxing 😂
If the settings for speed are no longer important, then how do you set up this printer in your slicer? Like lychee for instance? Does the printer ignores those settings and asks you to select fast mode or slow mode locally before every print?
Once they add a heated vat (Saturn 5 Ultra maybe?) it will be close to perfection. And even now without it, at $399 this is a superb machine.
I assume you’ve seen the new 4 ultra 16K? 👀
Hi. Thank you for the video. Would you recommend this printer for someone who looks to get first printer and knows nothing at all?
what would i need to make the saturn 4 safe to use in my home in terms of ventilation?
How does the heater help? Is it worth buying it?
At 10:50 you can clearly see that the Saturn 3-print has MUCH more details than the Saturn 4-print. The eyebrows and the wrinkle between them are almost invisible on the Saturn 4-print. Also the armor shows much more details on the S3-print. Did you print on the S4 with the High Speed-setting or why has the S4-print such a low quality? Even my old 4k-Elegoo Saturn shows more details.
True. Very strange. Both printers have the same XY Resolution of 19x24 um. 🤔
Really interesting!! I'm still using my trusty original Saturn, would be interested in seeing a comparison between the 1 and 4, is it time to upgrade?
Hopefully you can still go in and adjust the speed, lift and lower settings in the slicer? Auto calibration is nice and all, but different resins and even different models can require different settings and you need to be able to adjust those on a print-by-print basis.
Excited to see the power resume function. That actually seems like something new that Elegoo figured out on their own, instead of just copying the competition. I wonder if it would work better with the heater installed, so the resin isn't cooling while idle?
There are questions though. What's with the plate design with the long standoffs allowing resin to pool on top of the plate in an inaccessible space? And a hollow build plate that collects liquid inside and drips it out at random, seems like a recipe for disaster. The portrait orientation touch screen? Why? And it's great that the error calibration detects cured resin floating in the vat but if it still ends up puncturing the FEP, it sounds like they need to calibrate that feature better.
Love your videos, but Jessy, what resin are you using that you feel comfortable no mask? 😮
So mSLA have finally catched up with the tilting VAT that Formlabs introduced on the Form 1 back in 2014! Nice to see some progress! 😄
I'm waiting for Black Friday to purchase a Saturn 4 Ultra with the optional heater for consistent results for production. I'll 3D print a knob so I can raise and lower the lid with one hand. Resin smeared on an acrylic lid looks like hell.
5:55 - It looks like I'm going to need to create a separate WiFi network for my 3D printers that is air gapped from the internet. I don't like giving internet access to various devices. I don't like the potential for spying (looking at you Big Bambu) but these devices also represent significant privacy and security risks. The printer has a camera. Do you really want that exposed to the entire internet? Who knows what open ports in a 3D printer could be exploited to gain remote access to my WiFi network and all connected devices? I love WiFi enabled printing from the slicer but the security and privacy concerns make that look like a bad decision.
When will they have extra vats and screen protectors for sale??
Hi! I want to buy this Elegoo but so many people have problems with the lcd. Is real this problem?
what is lcd?
Yet again you have created a great review.
Yup, I’m upgrading. This thing makes my Mars 2 pro look like an ancient relic.
“I’m a man who likes to work on my prints, I like to take them apart and put them back together. Why Elegoo? They have a printer that works, then there’s this flip top box. I like things that are well designed, this box is interesting and practical.
New Saturn, quality, speed, flip top box, popular printer price.”
All jokes aside I really like that design. I’ve scratched the hell out of my Mono X’s lid on the Z axis taking it off frequently. If I was in the market for a new printer I’d probably be a buyer, but I think I’ll hold off for the 5 and see if they incorporate a heater into that design since that’s my only true issue with resin printing here is I do it all in a cool basement.
Ordered mine, can't wait for it to arrive. Should be a nice upgrade from my OG Saturn. What size is the vent circle in the back of the printer? I want to set up an exhaust system for it.
And that vent port is not built into the lid so no issues at all with detaching the hose. So nice!
I am in the exact same case and excitation state! I'm currently designing a custom exhaust system too. I managed to run a ⌀40mm PVC pipe vertically down the inside of the drywall of my workshop, as the air extraction unit happens to be located in the attic just vertically from this non-load-bearing wall. The pipe inlet emerges into the room next to where the printer will be, via a 90° elbow passing through a dummy socket cover. It connects through a custom iris shutter mechanism that I'm currently designing, that will allow me to control the amount of air being sucked in, or totally stop the extraction. I decided to use a cheap Chinese replica of a Dyson vacuum hose to connect the printer to this wall "air socket" due to the convenient quick release mechanism. I might add a small activated carbon filter (easy to replace) in order to keep the pipe and the extractor fan in the attic as clean as possible over time (I dunno it this is overkill or not? wrt resin VOCs). If I like the final setup, I'll share it on Printables :)
What resin were you using? I am still new but type of resin plays into the results too yes? What resin would you recommend for this printer?
Vat tilt during print (and the bib) is a feature of the Prusa SL1S, surprised to see it here, wonder who owns the patent and if it was leased or if Prusa had kept it available for the industry.
The venom and skull look awesome I'm new to resin printing looking 4 my 1st printer was looking at a GKTWO but think this is a better choise thank you 👍
i have pre order this printer, i'm so hype i want it right now to start my journey printing resin
How long will it take to arrive? I am considering pre-ordering it, but want to know if it will take long for it to arrive
@@TheNataliaReyes they said I will get it in June / July, but I receive a mail saying me that I'll have it before the 20 of June
Great video, bought one right after watching this video.Great pricing $399 for printer itself but I went for combo with the Mercury XS wash and cure stations for $579. Would have went for the combo with the air purifier but there was not a lot of information on the air purifier and as this is my first resin printer I need the wash and cure. Would love to see a video on the Air purifier and heater from you.
Did they give you a delivery date? I want to order one but am concerned with arrival time, need it before July
@@TheNataliaReyes Same told me June/July. They said they are coming by boat to the states and then will be sent by air to be delivered
Nice printer morph effect man!
What do you use to cure and wash the prints
upgrading from my Anycubic Photon Mono 4K, so this may be it. Is the ultra worth the extra money compared to just getting a 3 or 3 Ultra? or the 4?
Is it really best for first-time resin buyers?
What’s the heater for?
Sure glad I ordered mine day one release. I’ll be upgrading from my Saturn gen 1 😅 looking forward to more ultra videos!
this would literally be the perfect starter printer for anyone. Auto levelling and auto resin calibration is crazy. The AI camera is such a good addition too. Ill just have to save for a few years 🥲
Would the tilting vat also help reduce issues with suction cups? It seems like it would.
I believe it would since it’s peeling away vs lifting straight up
Jessie, I bought one of these and an extra plate and returned both of them because the "auto-leveling" feature stopped working after a few prints. How did you deal with this as it's a common known problem according to Elegoo?
the space i have is very limited, but i really want a resin printer for my 3D models i make, but im wondering how bad are the fumes from a resin printer, like can i have it sitting in my bedroom and it will stink out the place with fumes or can i use it the same as a FDM printer with a little more clean up effort ?
Curious if the Saturn 4 green lid will work on the 4 ultra?
hello, please tell me the printing settings of the elegoo saturn 4 ultra resin elegoo standard v2
Is there any rubber resins?
As a beginner to resin printers should I get the Saturn 3 or Mars 4 Ultra?
I have an ender 3 pro fdm rn
Did you ever finish the magneto lifesize statue?
How are the fumes? Are you able to add any kind of vacuumed tube to it or enclose it in anyway?
I don't think the 'Emergency' stop function should be any deeper than the live front screen when printing. I also fear the tilting vat may, mechanically speaking, end up being more hassle than bonus.
Did the autosense 'prevent' an accident by piercing the fep with a piece of debris, thus causing the same accident ? 🤔
It's more for NOT cracking screens by pushing the debris down into it. Sheets are.....somewhat cheap, screens are not.
I’ve never used a 3D printer in my life, I know how to 3d model etc. But is the learning curve of a resin printer like this long?
I am new to 3d printing, and am curious as to what the use of the external heater is?
Have you yet tested the Heater please as key to my buying decision?
Brother, how much ventilation do you have?
I am hesitant between the regular 4 or the ultra, are the few extra option on the ultra a worth enough quality of life change or not ??
The only question I have for you is what the different heights are for the various models. You give us time, but I want to know the realistic mm/h numbers
Hey, do you have any advice for my problem with the Saturn 4Ultra? My prints are so difficult to remove from the build plate that I almost need a hammer 😂. Warm water helps, but I’d prefer not to have to submerge the entire plate every time.
Does the printer come with a screen protector already installed?
Which slicer do you use?
Green cover kicks arse! (do not like the charcoal translucent at all) I wonder how much the green cover is.. or of you can order the 4 Ultra with a green cover? Definitely needs a heater!
Hey im reallky thinkin to starting with 3d printing and thbat would be my first so my question is do i really need all this extra stuff like the heater the washing station and co or can i just start with only getting the printer?
Saturn 2 screen went bye bye so I have been debating upgrading or spending the $100+ for the screen. Saturn 4 Ultra looks so nice and easy. How easy is it to replace the screen? I think the Saturn 2 is insane with having to take the whole thing apart.
In total how much would it cost? from like ventilation, cleaning parts, everything basically if your starting from nothing?
Do u recommend getting a flex plate? For this printer
Hey Uncle Jessy, I preordered the Saturn 4 Ultra and once I got it I set it up and it didn’t print anything on my first attempt…I haven’t tried anything else yet. I’m actually waiting to get some tips form some of you might be able to provide me.
I just ran my first print and it said it was running but I checked back 2 + hours later when it said the job was done and there was nothing on the print plate. Any ideas or tips on how to troubleshoot? I'm brand new to 3D printing
Great video - what resin do your recommend with this machine?
This looks awesome, maybe I should get into resin printing
I want to see that heater review before I decide if I want to get back into resin printing with this. My Saturn 2 broke me and I haven't looked at it in almost a year. But before I decide anything, I want to see if that heater works.
Is this considered a standard or mid size printer?
For figurines? Not just busts??
And the one question I still have is..... does resin printing still smell the whole house up? I tried to get into it, and bought one of the older Saturn's some time ago. The smell gave me headaches, and I had to get rid of it.
How are you cleaning the build plate between prints/resins?
so you refered to this as auto leveling, fauxhammer goes pretty hard on that being a missnomer, whats your thoughts on that, does it actualy level the plate with the screen?
Thanks for the video. Unfirtunaly my satunr 3 Ultra just died and i am looking now for a new printer. I have some questions: Because of the way the print bet is now is ther enot a lot of wasted resin ? By the look of it you cant really reach the top of the printbet the get to the access resin. Another question is if there are still slot for the airpurifier that where part of the satunr 3 ultra. The third question is if there is again the possibility to stuck the printbet vertical in place so that the access resin can drip down into the tank(i really missed this on the S3U.Thanks in advance for the answer.
best review so far!!!
the green acrylic look on the saturn 4 makes me want to get into resin printing.
If i was already into resin printing, i woudlnt get the Ultra, just cuz of the color options. Who needs a tilting tray when you can have a magnificent green machine
I wonder if the LCD-Displays are now better than the ones from the Ultra 3. I bought mine Ultra 3 last September and I already had to replace the display 4 times! If the Ultra4 would come with a 11" or 12" display and with a resin bed heater I would buy it immediately. Waiting for the Ultra5 or a product from another manufacturer
Question about what happens if the FEP sheet gets punctured. Are you like screwed. With the moving trey will liquid get into your printer now?
How do you find cleaning the build plate between prints? That gap feels like it would be a hassle to clean.