A look inside to see how the newer style Ryobi 40V Lithium battery is built. Tips on repairing

Поделиться
HTML-код
  • Опубликовано: 17 ноя 2024

Комментарии • 8

  • @cr361
    @cr361 2 года назад

    Exactly what I needed. Thanks.

  • @manuelruiz1854
    @manuelruiz1854 10 месяцев назад

    .........How can you say there is 42 volts on each side?????? You can clearly see how the batteries are in parallel on each side = 20 + volts on each side YES. ALSO I can say you had the balls to cut the circuit board the way you showed it....... YOU ARE VERY LUCKY THE BATTERIES WERE DISCHARGED!!!

    • @freshmaker5
      @freshmaker5  10 месяцев назад

      You said there’s 20 V on each side and the two sides are parallel. If that were the case, then the battery would only be 20v and double the amp hours of a single side. The only way to get 40 V out of two different sides of 20v is if the 2 sides were ran in series with each other. Each side is not 20v though. This pack has 10 batteries on a side. 10x4.2v(per battery) = 42v. So on each side is 42 V. The two 42 V sides are ran parallel to each other so the voltage remains at 42 V but combines the amp hours of the 2 sides which doubles the amp hours of battery pack.

    • @scottleiferman9370
      @scottleiferman9370 26 дней назад

      @@freshmaker5 Manuelruiz is correct. 20+ V each side. Connected together in series for a total 40+ V.

  • @manuelruiz1854
    @manuelruiz1854 10 месяцев назад

    Your disclaimer TELLS ALL........ "I am not a battery expert. Lithium batteries can be very dangerous so I do not recommend taking them apart"

    • @freshmaker5
      @freshmaker5  10 месяцев назад

      Welcome to America where people sue because their hot coffee they wanted was hot and they spilled it on themselves.

  • @tennesseestargazer
    @tennesseestargazer Год назад

    none of the fixes work!