Check out the new channel where I’ll be posting everything that doesn’t make it into these videos (like the burned up dyno we just bought) 😏 Thanks as always for the support guys!
seems like there are employees at that plant placing trackers on certain cars so they can steal them at a later date. Crazy operation, beyond scummy too
This was clearly insurance fraud 😂, yes officer I left my garage open, and left the car unlocked and, I didn’t hear anything and my cameras somehow caught absolutely nothing. 🤦♂️
Nevermind the rebuilding and the fabricating that's needed to put these vehicles together, what I'm most impressed with is your consistent narration as you're wrenching on the cars and keeping the story flowing. It's not "easy" like doing a VO with a script after you've shot everything. I respect and appreciate all the hard work that you and your crew put in.
It’s very clear that there are shift employees that work at Brampton that tag cars produced there with those trackers, then the probably sell the tracker info to people who boost cars. Someone should probably send this info into Stellantis and tell them to watch their line security camera for the wiring harness/fuse box build outs and see if they can pin point the employee doing it.
Fernando you was supposed to spit on that Thang first 🤣🤣🤣 great job guys. Its extremely crazy the guy that had something to do with stealing that car hit you up. Shows just how ballsy these people are. Not to mention it sounds like they either have or had a inside man or woman prob placing trackers from the factory. But great job guys as always. Definitely ready to see this bad girl fire up go down the rd.
Stellantis doesn't care. They are intentionally letting things go to pass the blame to the UAW and to eventually move production from CAN/US to Mexico. Employee cars are getting stolen out of the lot and they refuse to pay for security.
Car rebuild turns into investigative journalism possibly breaking that Dodge factory employees are finding where high value mopars are going and stealing them. Never know what you’ll get on this channel
Being one of the first channels to do something like this. Do you think you would release the pin outs guide you discovered so other car builders in the community could have it for the future? Since dodge never plans to I feel it would be a great contribution, especially with the gas cars being discontinued. Im sure numerous people would appreciate it!
Fun fact: moved to Michigan (Royal Oak area -20 minutes from Detroit) for about 3 years. In that time I bought a clean 1997 black civic coupe. Only had it for a month or so before it got stolen. Don’t miss that area at all.
Mix up a dab of the regular JB Weld, with a toothpick and a bit of care, use that to touch up the gouge in the carbon fiber dash. You can mix the JB to the color (lighter/darker) to match the carbon. (As a “poor” that likes nice things, I learned to touch up things like that😂)
19:25 tighten those upper control arm bolts when the car is on the ground. If you thighten in the air the bushing will be in a bind once the car weight pushes it up.
I'm loving the Demon 170 build, and the color is so unique. I can't wait to see what you have planned for this incredible build. Keep up the good work, man!
Make sure copart entered it in the NCIS system that it was recovered so when it gets on the road the cops don’t do a felony stop on you.. it just happened to another you tuber called Mortske repair. He bought a square body the cops pulled him over, arrested him and he spent 6 hours in jail. Love goes out. 💯 cool car.
I’m absolutely loving this build series. Having the backstory to the car really makes it special. Subscribing to the new channel nor because I can’t get enough of this build and all the others
I can't believe you guys have only 500 subs , you guys are my 2nd favourite build channel keep up the great work 🎉 it's awesome how you explain everything too
I should’ve watched this channel a year ago. It’s sooo entertaining man. I watched the first 170 video and this channel instantly became one of my top 5 favorite.
Make sure there’s no hairline cracks in that fuel line nipple you so elegantly straightened out 😂 but for real that’s a lot of pressure and you know how it is when you start bending metal back and forth. Love watching your videos 💪💪
Man I would love to try and get this thing programmed. I’m a dodge tech and it’s gonna be really hard to get it programmed without at least one of the original main modules. RFH, PCM, BCM. There’s a secret key code that’s stored in those modules for programming new modules. I can’t remember how you would program a bunch of all new modules without the secret key. But can’t wait to see it!!
New dyno is going to be cool. Loving the color of the car with the rims it really made it pop. Cant wait to see this beast working. New cars with all the electronics sure makes putting them back together with new parts and starting or doing anything for that matter is never a fun thing but hoping once you get them all programmed it'll wake that beast up.
Ok, there are definitely some utube videos that are way too long, however if your into the content then it won’t be a drag or find yourself skimming through to the good parts. Your videos as well with LegitStreetCars Alex over there I got no problem watching a full hour or more. Reason being, information, humor, and the passion of what brought me here for in the first place. Keep doing what you all are doing and I thank you for all the amazing content! See you in the next video guys. Shout out to Fernando for the precise method of placement with that ‘shaft’ lol
Amazing how he knows everything about the car and how to put it together and every part. I think he makes it look too easy to assemble. I would have to say if I had a question about a part or anything else he would know.Very impressive and if I knew half of what he knows I would be in great shape.Thanks for this awesome video.💎👊🏼🇺🇸
That car is so cool, dream car for most car guys. I like the omage to the old school pink, but I am super glad there some black there to break it up a little and add some contrast. Super tasteful choice! Thanks for the content. Love this build!
I will say THIS about THAT! Your very consistent high quality, evident in your video productions is SUPERB! If my two dogs, Freddie and Dino were still here, they would do doubt give you their highest rating. Two Tails Wagging Furiously!! Almost forgot. L-O-V-E, LOVE the color!
I started following you when I saw the first video when you got this Demon. You are entertaining and I am biting my nails waiting to see it run for the first time. If you want to distill this to the bare bones you are literally building a badass out of junked parts.
Not many would choose Pepto as a color and I usually like less flashy colors but I had a Black and Pepto Torker 540 freestyle bike as a teen in the 80's Awesome Build
Love the videos Lee. I love how detailed they are and how much you're able to get on them. With that being said, I hate having to wait for videos since I enjoy them so much. Glad you have a second channel now to give us a bigger glimpse of what you do on a daily basis and hold us viewers at bay while you create longer videos of these awesome builds.
I love your channel dude clearly you know what you’re doing. You know everything about cars and speak very well. I hope your channel grows bigger and bigger and we see that demon 170 done soon.❤❤❤❤
Lee I thank you very much I really appreciate and enjoy your videos been watching for a while and I just watched the new channel love the content buddy keep up the great work!
That's funny you guys uploaded the second part to the build right after I remade the body and made it into a Turbo Big Block drag car XD really love the progress of this build you guys are inspiring.
A little dab of touch up clear coat will probably do wonders for the gouge on your carbon trim. I did it a lot on my carbon splitter. Not 100% of course, but makes it way less visible.
We appreciate you guys as well making this content for us to enjoy, so just liking and subscribing is the least we can do show our support for all your work. Great video.Looking forward to next one.
For that scratch on the dash piece, just find a used cheap one and paint it satin pink, or gloss pink and if its too shiny hit it with a satin clear over the top. I don't know how it would look but it might be worth it or too much pink.
Lee is the perfect example of “look where the class clown is now” everything he does is definitely class clown activity he can keep a script look natural even with obstacles truly remarkable
Check out the new channel where I’ll be posting everything that doesn’t make it into these videos (like the burned up dyno we just bought) 😏
Thanks as always for the support guys!
What's the new channel name?
Supberb vid
Subscribed, usually not into these like and subscribe things but its for the greater good
@@Cornelius1821
@@Cornelius1821 the one you responded to
I'm willing to wait however long it takes to post. Aren't many other theater channels doing it this way?
seems like there are employees at that plant placing trackers on certain cars so they can steal them at a later date. Crazy operation, beyond scummy too
I was thinking that too
This was clearly insurance fraud 😂, yes officer I left my garage open, and left the car unlocked and, I didn’t hear anything and my cameras somehow caught absolutely nothing. 🤦♂️
Doing a great job job
@@angelcelis9090 dawg do you know how common hellcat robberys are this is 100% legit if someone that wants your car sees it they will get it
@@angelcelis9090 same thought bro
Bros videos are outrageously good man somehow there straight to the point and not so boring you actually see progress on his builds and not a bs
I appreciate that!
Nevermind the rebuilding and the fabricating that's needed to put these vehicles together, what I'm most impressed with is your consistent narration as you're wrenching on the cars and keeping the story flowing. It's not "easy" like doing a VO with a script after you've shot everything. I respect and appreciate all the hard work that you and your crew put in.
Lee obviously hasn't seen my shaft
👁️👃🏻👁️
Yeah he hasn’t as he doesn’t carry around the microscope needed to see yours with him everywhere he goes.
@@paulary5613damn that really adds to the joke😞
right
@paulary5613 it's a joke bro... did you even watch the video?
31:50 Fernando,, Did you spit on the shaft first or rough it in??😂😂
It’s very clear that there are shift employees that work at Brampton that tag cars produced there with those trackers, then the probably sell the tracker info to people who boost cars. Someone should probably send this info into Stellantis and tell them to watch their line security camera for the wiring harness/fuse box build outs and see if they can pin point the employee doing it.
Great quality! From a “small guy” I feel like I’m watching an episode of power block from back in the day. Keep it up. I’ll be here for it.
I'm here for the pink panther!!!!
Literally saw it and immediately clicked on it
@@Nonstop_Bentley SAME HERE!!! I multi-tasked this video and the cleetus video!!!
20:25 Inside contacts.
Yep pretty much every 170 was customer special ordered, all that info is on a computer in that plant. They have the addresses of every 170.
Fernando you was supposed to spit on that Thang first 🤣🤣🤣 great job guys. Its extremely crazy the guy that had something to do with stealing that car hit you up. Shows just how ballsy these people are. Not to mention it sounds like they either have or had a inside man or woman prob placing trackers from the factory. But great job guys as always. Definitely ready to see this bad girl fire up go down the rd.
The Brampton plant needs to do better background checks. Or pay their employees better. I don't know - just pisses me off.
Stellantis doesn't care. They are intentionally letting things go to pass the blame to the UAW and to eventually move production from CAN/US to Mexico. Employee cars are getting stolen out of the lot and they refuse to pay for security.
Probably some mix of both tbh
Car rebuild turns into investigative journalism possibly breaking that Dodge factory employees are finding where high value mopars are going and stealing them. Never know what you’ll get on this channel
i wonder how "diverse" their workforce is
@@Trump_Won_AGAIN canadian here, brampton is 15% european now... tell trump to invade us please
Just got a 2020 Challenger Scat Pack 392, loving it so far and its crazy fast, can’t imagine how crazy the Demon 170 is to actually drive
Pink panther Demon 169. Kicking ass like always guys, car looks amazing
Being one of the first channels to do something like this. Do you think you would release the pin outs guide you discovered so other car builders in the community could have it for the future? Since dodge never plans to I feel it would be a great contribution, especially with the gas cars being discontinued. Im sure numerous people would appreciate it!
Fun fact: moved to Michigan (Royal Oak area -20 minutes from Detroit) for about 3 years. In that time I bought a clean 1997 black civic coupe. Only had it for a month or so before it got stolen. Don’t miss that area at all.
Mix up a dab of the regular JB Weld, with a toothpick and a bit of care, use that to touch up the gouge in the carbon fiber dash. You can mix the JB to the color (lighter/darker) to match the carbon.
(As a “poor” that likes nice things, I learned to touch up things like that😂)
19:25 tighten those upper control arm bolts when the car is on the ground. If you thighten in the air the bushing will be in a bind once the car weight pushes it up.
No matter how long it takes to post, I’m here for it. Aren’t many other channels theatre doing it like this
@@brysan3876 I binge watch, and occasionally stop by the shop for more Drip .
Never have I ever waited for a video to drop until now
i been waiting for the vr4 episode for years
Can’t wait to see this beauty of a car running! ❤
I'm loving the Demon 170 build, and the color is so unique. I can't wait to see what you have planned for this incredible build. Keep up the good work, man!
30 seconds ago?? I loved the first vid on this, happy to see it again!
Same man
This is easily one of the best rebuild channels out there. The Panther Pink is boss, Lee! Keep the great content coming.
Make sure copart entered it in the NCIS system that it was recovered so when it gets on the road the cops don’t do a felony stop on you.. it just happened to another you tuber called Mortske repair. He bought a square body the cops pulled him over, arrested him and he spent 6 hours in jail. Love goes out. 💯 cool car.
“What’s up guys, this episode we’re taking inside the Maryland prison system”
@@LeeCsomething tells me that dude in a south dakota county jail might've had a slightly better time than you would in a maryland cesspool jail
That oil pan is killing me. All those beautiful parts underneath makes the pan stick out like a sore thumb 😂
I’m absolutely loving this build series. Having the backstory to the car really makes it special.
Subscribing to the new channel nor because I can’t get enough of this build and all the others
literally been waiting for this video for at least a month🙏🏾🙏🏾
I can't believe you guys have only 500 subs , you guys are my 2nd favourite build channel keep up the great work 🎉 it's awesome how you explain everything too
I should’ve watched this channel a year ago. It’s sooo entertaining man. I watched the first 170 video and this channel instantly became one of my top 5 favorite.
On the next episode
“REBUILDING A ROOF WITH PARTS FROM A BURNED DOWN BUILDING” (CRAZY STORY!)
😂
Make sure there’s no hairline cracks in that fuel line nipple you so elegantly straightened out 😂 but for real that’s a lot of pressure and you know how it is when you start bending metal back and forth. Love watching your videos 💪💪
I'm loving how the car looks when it's lifted! Good luck on getting it started!
Man I would love to try and get this thing programmed. I’m a dodge tech and it’s gonna be really hard to get it programmed without at least one of the original main modules. RFH, PCM, BCM. There’s a secret key code that’s stored in those modules for programming new modules. I can’t remember how you would program a bunch of all new modules without the secret key. But can’t wait to see it!!
New dyno is going to be cool. Loving the color of the car with the rims it really made it pop. Cant wait to see this beast working. New cars with all the electronics sure makes putting them back together with new parts and starting or doing anything for that matter is never a fun thing but hoping once you get them all programmed it'll wake that beast up.
Great content, can’t wait to see this Demon built up but also good to cover the detail and see it come together
Love the coverage, quality of the vids, etc. Subscribed to the next channel. Thanks for your work. It's really incredible!
Ok, there are definitely some utube videos that are way too long, however if your into the content then it won’t be a drag or find yourself skimming through to the good parts. Your videos as well with LegitStreetCars Alex over there I got no problem watching a full hour or more. Reason being, information, humor, and the passion of what brought me here for in the first place. Keep doing what you all are doing and I thank you for all the amazing content! See you in the next video guys. Shout out to Fernando for the precise method of placement with that ‘shaft’ lol
Awesome build. Crazy story with this one. Great job. thanks for the video boss
The fuel rail metal probably work hardened from the bending. Not something i'd mess with
Amazing how he knows everything about the car and how to put it together and every part. I think he makes it look too easy to assemble. I would have to say if I had a question about a part or anything else he would know.Very impressive and if I knew half of what he knows I would be in great shape.Thanks for this awesome video.💎👊🏼🇺🇸
honestly i love the 1 hour videos because it’s satisfying to watch and be excited to watch you succeed or sad when you fail
That car is so cool, dream car for most car guys. I like the omage to the old school pink, but I am super glad there some black there to break it up a little and add some contrast. Super tasteful choice! Thanks for the content. Love this build!
Honestly I love sitting down and watching this channel more than I watch TV totally look forward to your videos keep up the great work 😊
Thanks for making a update that has a ton of stuff into it!
If you haven’t gotten rid of the old chassis yet you should keep make it look like it’s going through a wall inside the building.
I will say THIS about THAT! Your very consistent high quality, evident in your video productions is SUPERB! If my two dogs, Freddie and Dino were still here, they would do doubt give you their highest rating. Two Tails Wagging Furiously!! Almost forgot. L-O-V-E, LOVE the color!
19:37 well well well, the usual suspects 🤦🏽♂️🤦🏽♂️
Wild
murica'
well well well
every! single! time!
entered the comments wondering how far i'd have to scroll to find this exact comment
So soothing when the puzzle comes together and the true beauty starts showing 😌... chef's kiss this pink beast 🎉
30:23 looked like you was doing cpr on the car lol
I started following you when I saw the first video when you got this Demon. You are entertaining and I am biting my nails waiting to see it run for the first time. If you want to distill this to the bare bones you are literally building a badass out of junked parts.
Not many would choose Pepto as a color and I usually like less flashy colors but I had a Black and Pepto Torker 540 freestyle bike as a teen in the 80's Awesome Build
I'm so ready for this
They sell that clear plastic over the cluster separately if u want those scratches gone
Great build!
Love the videos Lee. I love how detailed they are and how much you're able to get on them. With that being said, I hate having to wait for videos since I enjoy them so much. Glad you have a second channel now to give us a bigger glimpse of what you do on a daily basis and hold us viewers at bay while you create longer videos of these awesome builds.
Bro God bless you man. You really have no idea how i feel when your videos take so long to come. A new cjannel with quicker updates? Thats just fire
This is by far my favorite build. You guys have a killer channel. I look forward to your videos.
why is it hard for people to just like
Lee outstanding progress on bringing the Demon back to life! I am looking forward to the next video!
I love your channel dude clearly you know what you’re doing. You know everything about cars and speak very well. I hope your channel grows bigger and bigger and we see that demon 170 done soon.❤❤❤❤
ive been waiting for this video to drop for 2 weeks! said it before, will say it again, greatest channel on YT, and most epic build!
Been waiting for this video🙏
Lee I thank you very much I really appreciate and enjoy your videos been watching for a while and I just watched the new channel love the content buddy keep up the great work!
Love seeing these videos no matter the length or how long they take to come out. Shoutout you and your whole crew!!!!!!!
Keep up the amazing content and the work you guys put day in and out each and everyday.
R. U.N. / R U.N./R.U.N. GRAB THE SHAFT WITH YOUR BARE HANDS ! LOL 🤣🤣🤣🤣🤣🤣🤣🤣
I am in love with this car and build/story!
I love this build you gained a subscriber from these demon 170 vids good work keep it up
That's funny you guys uploaded the second part to the build right after I remade the body and made it into a Turbo Big Block drag car XD really love the progress of this build you guys are inspiring.
Great work guys! Such a bad ass build!
Amazing work - the Goonzquad is doing a very similar build with a GT-R.. Nice work!!!
Just for you, man. I'll subscribe to ur new channel. You are one of a few youtube I love watching.
Awesome video man, I seriously love the paint job. Can't wait to see this finished, much love from Cleveland ❤❤❤
Chillin on day off… ScrapLifeLee & Black Op6 Season 1 dropped same day⁉️ LFG‼️
YESSIR 💪🏾💯
A little dab of touch up clear coat will probably do wonders for the gouge on your carbon trim. I did it a lot on my carbon splitter. Not 100% of course, but makes it way less visible.
I just want to say thank you for giving these cars a second life.
We appreciate you guys as well making this content for us to enjoy, so just liking and subscribing is the least we can do show our support for all your work. Great video.Looking forward to next one.
I have a 2023 jailbreak Dash frame and harness that you could buy?
Awesome work Lee and Co.!
Cannot wait to hear this thing start for the first time!
Just ran across your video, and now I'm hooked on your channel.. Keep the Great content coming.. 🔥 🔥 🔥
Welcome to the party!
I really enjoy this guy building all these Dodge Demons, I find this channel very Entertaining
Good to see the progress on this car thank you for sharing and doing this❤
I enjoy watching all the cars you bring back to life, what would be wild is times see you guys make a demon baja truck or awd rally car
At 11.05 i noticed a decent split in the underbelly. I would suggest sealing that up to prevent future rust.
i’m excited to see the process that car color is magnificent 😍
For that scratch on the dash piece, just find a used cheap one and paint it satin pink, or gloss pink and if its too shiny hit it with a satin clear over the top. I don't know how it would look but it might be worth it or too much pink.
Okay, whatever it takes. I'm all in. Enjoy your content. Thanks Ray
Loving the content, your style and no BS... just pure wrenching ✌️✌️🇰🇪🇰🇪
Your videos are always top notch Lee. Thanks for the content. Aloha from Oahu 🤙
Can wait to see it completed!!
Lee is the perfect example of “look where the class clown is now” everything he does is definitely class clown activity he can keep a script look natural even with obstacles truly remarkable
Love the channel's bro lkeep it up also cant wait for next update on the turbo corvette you guy's are awesome
Dude is definitely putting out content worthy of well over a million views and subscribers keep grinding dude I love the content 🎉
guide the shaft in the hole.........Top 10 quote for the channel this year
Amazing job . Love the channel and that you do so many mopars . .
As a fellow MD’er I love this channel!!
never been a fan of pink but that is sick AF on that car
it has like a purple shift
Wild, I wait so long for your videos and now a second channel for MORE!?!?? WOOO HELL YEA