An Easy Way to Lower a Mk7 GTI - H&R Springs
HTML-код
- Опубликовано: 25 авг 2020
- Check out the H&R lowering springs here: bit.ly/3YWMv6d
DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
Since I got the car, I knew it needed to be lowered 1-2 inches, and we finally did it! I went with the H&R Sport lowering springs that add a 1.3 inch drop front and rear. These really do drop it to the perfect height for daily driving. I can get in and out of my driveway and over speed bumps with no issues. I found these to be pretty difficult to install. I followed ShopDAP's video and being mechanics, they make it look easy but I had a ton of trouble wrestling the front hub sleeves to get the struts in and out.
Otherwise, I'm super happy and will make a more detailed impressions video in the future!
Thank you all for watching! Please be sure to subscribe for more and drop those comments and leave a like!
SUBSCRIBE - bit.ly/2IHFZcj
WATCH MORE NC MIATA CONTENT - • Restoring and Refinish...
FOLLOW COLORED IN LIGHT:
INSTAGRAM / coloredinlight
FACEBOOK / coloredinlight
Watch More Colored in Light:
Vlogs: • Custom RPF1 Center Cap...
Car Meets and Events: • Driving with some FAST...
NC Miata 101: • NC Miata 101 | How to ...
ABOUT COLORED IN LIGHT
Jackson Ralston, or known here as Colored in Light, is a video creator and car enthusiast based in Texas. On this channel, we take a deep dive into all things Miatas, cars and life in the pursuit of all things automotive! From how-to videos, vlogs and product features and reviews, Colored in Light is the place for car enthusiasts.
-----------------------------------VIDEO CREATION GEAR-------------------------------------
CAMERAS
DSLR Camera (Sony A7) - amzn.to/2qU95BU
GoPro Session - amzn.to/2sBBcWV
GoPro Hero 3+ Black - amzn.to/2EnfKHZ
CAMERA MOUNTS
Suction Mount - amzn.to/2LYIgUI
Joby GorillaPod 3K Kit - amzn.to/2YTEkcZ
GoPro Accessories - amzn.to/35uDd5X
CASES and PACKS
Cheap GoPro Travel Case - amzn.to/2PpIx55
LENSES
Sony 50mm FE - amzn.to/2M0Vdx8
Sony 28-70mm FE - amzn.to/35oJNLg
AUDIO
Rode VideoMicro - amzn.to/2PPRDai
Rode VideoMic - amzn.to/2PSq8wH
Sony VO Recorder - amzn.to/36I4t1e
THE MOD LIST
All Products and Links - docs.google.com/document/d/1j... 
Авто/Мото
Great video dude! Very informative and detailed. Im getting these springs for my 19 GTI.
H&r really gives a nice drop. Maintains a comfortable ride too
Great video. This is exactly what I want to do to my car. I love the DCC (Adaptive Suspension) so I didn’t want to lose that with coil overs. Just wanted a slightly lower ride mainly for looks and I love how your car turned out. Thanks for the good video!
Kw makes coilovers with dcc adapters
I'm planning on getting the KW stuff eventually.
@@ColoredinLight Would you recommend HR springs or EMD springs because I have DCC and dont want to lose it...
15mm(front) 20mm(back) spacer will look awesome bro. great video!
Stay tuned!
Looking forward to the follow up video 👌
Glad I found your channel. I bought a 2017 GTI Autobahn less than a month ago and you are doing all of the things I have been thinking about. Anxious to hear your opinion on the springs after some driving.
Thanks for checking out the channel! Congrats on the new car, I've definitely been enjoying so far given the low amount of miles driven each week.
I can give you a good deal on new lowering springs, they're new, just need to use the money for maintenance
Nice video, looks good! I am getting ready to do this on my 2019 with the H&R Sports. Going to attempt the 2x4 method to get the strut out so we'll see how that goes.
Thanks! I'll be curious to know if the 2x4 method is easier
@@ColoredinLight Finally got around to installing these over the weekend...2x4 definitely helped a lot, didn't have to remove the axle bolts or ball joint. The passenger side seemed a little harder in general to do. driver side was a piece of cake. If you ever have to do any strut work again definitely recommend it though!
Thanks for the follow up! Good insight and I'm glad it worked out easier for you
Hi, wich is this method 2x4?
I changed springs and struts/shocks on my Skoda Rapid which is essentially VW Polo Mk5 Sedan. It took me one and half days to do the front. Real pain in the ass because you can't get the struts out without fucking around for hours and it was equally painful getting them back in. All beacuse I did not want to dismantle everything. Rear? One and half... hours, both sides combined.
Dope video and Playlist. As a new GTI Owner what are some best bang for buck tools to purchase in order to do at home modifying like this? Thanks again and you've got yourself a new subscriber.
Get yourself a torx and triple square socket set!
Los recomiendas ? Tengo un gti 2020 y quiero bajarlo en altura
How much did you pay for an alignment
Could you possibly grab a part number off your springs (not the box, the actual spring) and let me know what it is? I bought one recently and it has H&R springs on it that I'm almost CERTAIN are not GTi sport springs and are instead for something like an Alltrack because they wanted to get lower. The box says the correct part number for the sport spring but the spring in the rear I can see the part number does not say the same thing and it instead has a number like 28840 which when you Google it...comes up closer to an Alltrack/Sportwagen part number (28840-4).
I just want to make sure, they're coming off the car soon and will be sold but I want to know what they actually are haha.
Looks great (as does your NC as usual), and I hope you can help. At least ONE of those springs has to be easy enough to see a part number on it without jacking it up haha. 🙏
I just installed H&R springs on my Mk 7.5 and they were wobbly, like didn't fit at all in the front, the spring was literally loose on the struts, anyway I bought APR sport springs & they feel great, super sharp, a little less stiff than H&R but more stiff than stock. My bf installed the H&Rs on his A3 and they got perfect, do you have any explanation for why they wouldn't fit on my GTI but they fit great on his A3?
Hmm not sure on that. Maybe they sent the wrong springs?
Sir.,
I have Renault Fluence 2014
What do you think will be best for my car H&R or Eibach howver H&R drop front and rear both are 35mm while Eibach drop front 30mm / rear 25mm
I responded to the last comment you made in the other video
Are you on stock struts?
I live in Newjersey and I want
To lower my GTI but I’m not sure if it would be a bad for the snow. Even though we don’t get a lot of snow like other states, we might see 2 or 3 days during the winter of 4 to 6 inches of snow usually, my question is would I still be able to drive the GTI without getting stuck in the snow.
same here in NJ. I figure if Im stuck lower an inch or inch and a half, id be stuck not lowered lol. and those 2 or 3 days aint worth NOT getting it
also live in NY area with trash roads. These random bumps and holes is making me second guess...
Had no idea you had to remove that axle like that I thought you just needed to take off the axle nut.
You can just take the axel nut out. I don’t even take the axle off.
What tools did you use for all that ? May you give me the list pls
Dog leg wrenches, Ratchets, torx and triple square bits
Great video 💯
Did you adjust your headlights after. They point to the ground after lowering.
Nah, they're all fine
Add spacers bro front 12mm & rear 15mm
Done and done
Hey man did you struggle with the back when screwing the bolt in
The entire thing was a challenge lol
Just curious, did you have to torque anything with the suspension fully weighted like you do on a Miata?
I thought the same, checked all over the place and no one said anything about it
@@ColoredinLight Interesting. Looks like you got the intended drop, so, probably nothing binding up. Send it! Lol.
Something changes in launch control? Time?
just got these for my 24 Autobahn, How long would you say the OEM shocks will last? I live in the DC area unfortunately so roads here arent the best
I love the look the springs gave me but I really wish I would have just bought coilovers first. That's all I'll say lol
@@ColoredinLight oh boy 😂 i may have to settle for springs cause i have DCC and my only other option are KW V3’s and those are PRICEY
I have DCC too. Just get whatever coilovers and a DCC delete kit
@@ColoredinLight was ride quality that bad on the springs? if i changed to bilstein shocks and struts meant for springs, you think that would be better?
It's for sure bouncy now. With Bilsteins and spring you'll probably be ok since they're just better.
Why not coilovers? Lowering springs don't play well with stock shocks?
This car is mainly meant as the daily driver. All I wanted was the small drop without the spend/functionality/ride quality of coilovers. The stock shocks will be fine
Did you watch the video? The rears can’t be coil-overs. Watch at 7:00 mark...
Scott Sonnek do you even know what you are talking about ? Of course the rears can have coilovers ...
When normally driving is the ride noticeably harsher/stiffer
With the dynamic suspension in comfort mode I drive around with the wife and baby just fine. At the end of the day, its going to make your suspension harder
What size wheels do you have?
These are OEM size
Always an interest when enthusiasts choose to lower the ride height w/o taking into account the other components that complement the drop (i.e. adjustable end links). It's great for a vehicle that is a dedicated to the track, but for street driving; lowering has it's future costs.
Eh. It'll be alright.
do you need to get alignment done after?
You should
@@ColoredinLight Thank you!
Question buddy hows the ride and alignment after installation?
Alignment needs to be done any time you mess with suspension. It wasn't too far off though.
The ride leaves some to be desired. I'm ready for coilovers now.
@@ColoredinLight beautiful car awesome job
Thanks!
@@ColoredinLight Thank you for this video man. Just curious what changed your mind about the springs since first installing them
Just a lot bouncier overtime.
I think the front would have been way easier to install if you had both sides off the ground and the sway bar wasn't loaded.
It absolutely would have been. I just had 0 room to do it in the garage
I wish I could do this to my mk 7...
Why not!?
@@ColoredinLight just don't think I could handle the install myself. Probably will get it done though...but would rather save the extra cash on install.
@@KC-lg8qf I really want to do it also, I am getting new wheels but I feel like it isn't going to look right unless I also do some lowering springs. I have all the tools, but the install just seems daunting.
It was certainly tougher than the Japanese cars I usually do this sort of thing to but if I can do it, you can too.
@@acrane2 same here! New wheels ready to go on....and i want springs. Maybe i will try it. At least you have all of the tools.
get an alignment dawg
Yep