Clawing GOLD out of the dirt! Gold Claw!
HTML-код
- Опубликовано: 8 сен 2024
- Gold pan review of the Gold Claw Production Pan one of the many production gold pans. In this review I evaluate the speed of the gold pan, the capture rate using the most difficult material I could find. As well as the general ease of use and construction. As with most of the pans in this review series I am a complete novice with this pan, and only going by the manufacturers instructions and other RUclips videos out there. I did try multiple times with this pan and found the faster I went the more losses I had. Before people get mad at me or insult me, I am going at this as a complete novice with this pan, and my technique will be a complete novice technique. Everyone starts at the beginning, nobody starts as an expert.
_______________
SUBSCRIBE BY CLICKING THIS LINK: www.youtube.co...
FOLLOW ME AROUND THE WEB AND ON SOCIAL MEDIA AT:
Instagram: / dan_hurd_prospecting
Patreon - / danhurd
Website -- www.danhurdpros...
Facebook -- / danhurdgold
Twitter -- / @danprospecting
SPONSORS:
Arbor Fabricating classifiers use this link: arborfab.com/Pr...
10% discount code: danhurd
Gold Stream Placer Supplies: / goldstreamplacer
911 Metallurgist: www.911metallu...
OLight Flashlights: bit.ly/2lVEmBR
Links to equipment used in my videos:
Gold panning equipment:
Garrett 15" Supper Sluice gold pan: amzn.to/2SXKBkW
Garrett Gold Guzzler snuffer: amzn.to/316szzF
Garrett gold panning kit: amzn.to/2GF4DLU
Razor Back Shovel: amzn.to/2ytODrW
Crevicing tools: amzn.to/2yoNUrY
Metal detecting equipment:
Garrett AT Gold metal detector: amzn.to/2K8iYmh
Gold Bug 2 metal detector: amzn.to/2SWYa3X
Falcon MD 20: amzn.to/326zZUj
Garret pinpointer: amzn.to/2ZloUwM
Sand scoop: amzn.to/2Zl7OPy
Filming equipment:
Sony HX80 camera: amzn.to/2YwAmJr
Ricoh WG50 underwater/closeup camera: amzn.to/2LTgb2p
Sunglasses with built in camera: amzn.to/31bEAnJ
USB microscope: amzn.to/2LSDk55
Larger mining equipment:
Gold cube: amzn.to/2YIcbbn
Gold cube trommel: amzn.to/2SWYWhn
Honda generator: amzn.to/2OwFVnH
Honda water pump: amzn.to/2LS5gGj
Milwaukee shop vac: amzn.to/2YwB3T3
Milwaukee hammer drill: amzn.to/2YzrMcR
Cobra crusher: amzn.to/3164NE3
KK8 Kiln: amzn.to/2MrRzNT
Dan's hat: amzn.to/2LU34Ou
OTHER VIDEOS YOU MAY LIKE:
It was such a horrible sight I had to call the cops.
• It was such a horrible...
Sluicing one ounce of gold. (High Banking, How long?)
• Sluicing one ounce of ...
In search of a facetable gem stone (garnet).
• In search of a facetab...
Reading a river, where does gold deposit.
• Reading a river, where...
Miniature Dynamite, Blasting rocks for Opals. (Micro Blaster)
• A spiral gold wheel to...
A spiral gold wheel to recover lots of gold!
• Miniature Dynamite, Bl...
Panning one ounce of gold. (How long?)
• Panning one ounce of g...
Where to find gold? Potholes or Bedrock pockets.
• Where to find gold? P...
Splitting rocks with the Micro Blaster
• Splitting rocks with t...
Home made Impact mill rock crusher for gold ore.
• Home made Impact mill ...
Finding Chunky Gold! At the Trout Creek Mine.
• Finding Chunky Gold! ...
Two little sticks of dynamite, one big blast! (Micro Blaster and Visible Gold)
• Two little sticks of d...
Many more gold panning videos can be found on my RUclips channel at:
/ galidain
This video is produced by Dan Hurd, Prospector, Miner, Teacher and RUclipsr, as part of his RUclips channel based on educational videos about gold mining, gold panning, prospecting, rock hounding, and mineral collecting.
#goldpanning #thefinders #findinggold
OK, before the negative comments that accuse me of "You don't know what you are doing!', or "You are doing it wrong!" I will stress one more time I am a complete novice with these pans, using them for the first time. Going only by the manufacturer's demonstration videos and other RUclips videos. I have taken what I have learned from watching these and trying to make it fit the situation I have here. Yes I make mistakes. Also I am using the most difficult material I can find for these tests, no chance of 100% recovery from ANY pan. If I wanted Higher recovery rates from every pan I would have got easier material with bigger gold. But I wanted losses so I could emphasize or separate the pans recovery rates more. If they all showed 100% it would not be much of a comparison.
We could test them pans against a chain saw lol ripping like a chainsaw.. that should have the nickname big blue lol
@@joesguiltyguitar There is a lot to be said for durability testing.
There's a newer video of how to its more about getting everything moving and stratified. You don't want it sloshing from one side to the other. Small quick back and forth motions. I use the regular and love it. I just bounce it back and forth between my hands quickly while tipping it and I have good results. If you get a chance try that out. I'd love to hear what the capture rate was then
Hi Dan. I love watching your videos. You seem worried about comments. I think you have been very fair about all your reviews. Remember opinions are like arseholes everyone has one! Keep up the good work
Hi Dan, will you be putting the super sluice through the same test? I'd be interested in seeing you detail your production panning technique with the Garrett.
To reduce on arm strain, it is meant to be stratified under the water level. Once you gain experience and become comfortable with the pan, you can more rapidly tilt until completely vertical and go much faster. The deep riffles are pretty safe. It is also designed to be used without having to classify. So if you can get close to 80-85% recovery on a full pan every minute, as we all know, it's all about how much material you can process. Thanks for the video Dan!
Hey Dan, I have a gold claw and I find that you have to use only the left/right stratifying motion the whole time until the pan is at a vertical angle. Lifting the pan or washing like you do with a normal pan will wash gold out the sides because of the shape of the pan. You have to use a stratifying motion the whole time, slowing down the more vertical your pan gets.
Correct!
thx
I'm starting to think Dan just likes to play with dirt.
yah think ;)
Think the high loss count is to do with the color Dan. Chris from Vo- Gus tested a pink one, and obtained better results lol!!! Just choking your chain dude, another great unbiased review. Thanks again....
I love my production pan. I too have a prototype production pan. The ease and speed of the production pan is amazing. The gold claw series of pans are absolute game changers. I use mine dry panning to cons in the Arizona Desert and even dry panning it will capture some super fine gold specs. I have all 3 gold claw pans in my Jeep at all times. Great to get through a large quantity of material in a fast manner. Yes the production pan can get heavy but with a little practice, the process is phenomenal. I highly recommend the gold claw pans
Love that river ... Got fish ... Got gold ... Perfect ...
Stock some gold trout and blow everyone's mind.
Hi Dan,
My experience with much finer gold and matrix than you are dealing with has shown that when you tip the pan while shaking the gold travels along the surface of the pan much slower than the blondes flow well above it. You might try to stratify for at least ten seconds, then fairly briskly tip while shaking until about a third of the material is out of the pan, then come back to flat, re stratify and repeat until down to black sand. It works on 500 mesh gold in 30 mesh matrix at about 95% recovery into the black sand in about 3 minutes with 2 lb batches in a 10" pan. The finish is much different though as it uses different physics.
Came for the pan and rewarded with such blue sky after not knowing how many day of snow, thankyou is so not enough
I like the angle between the sets of riffles on front. Seems that is the one thing that makes it truly different from other pans.
I don't know how anyone could give you a hard time. You made it very clear you are evaluating these as an experienced at panning, but new at this pan. Keep the reviews coming. I will never buy one or mine for gold, but I love watching your videos all the same. It is fascinating.
Thanks!
Hey Dan... With garret pan u got in 30 minits 100% gold. But with claw u got ~ 78-81 % but u did it in 6 time faster... With a better gold, it will capture ~ 90%. Thanks a lot. Happy to see again
Thank you for doing these videos. I have always wanted to try panning for gold. With your videos I at least feel like I have a vague idea about what I am going into.
You're welcome
@@Danhurd you are one heck of a teacher.
Lovely blue skies, what a beautiful day for panning
Thank you Dan. For your unbiased testing.
Really excited to hear that they are doing a production pan. Been using their other pans for just over a year now. Very pleased with them and sure they will work out the issues before full production. Great video.
Awesome job done. The peace and quiet is priceless. Really enjoyed this video..
The people that gave a thumbs down to this video should be ashamed of themselves. If a person is doing the thing they love and are showing you to the best or their ability and not using clickbait you should respect that!!! they are taking time out of their life to better yours!!!!
I live in Florida and have zero chance of ever going gold prospecting and don't even really want to, but still find myself watching this channel because of your enthusiasm and quality of the information your provide Dan.
ga, al, sc and nc are close. dalonga ga is the place from palm bay
Hi Dan, I’m a great fan from eastern Canada, I was good friend of Klint, He send me the same printed demo also, It work pretty, but it should be used carefully with different material, the shaking motion and the tilting will change between different material, specially with a black sand loaded pan or supercon, should recess riffle sometime, The great issue about the goldclaw is what klint say by itself
« "I initially built the Gold Claw Pan thinking professional or seasoned miners would take to it naturally, and that beginners would struggle as they normally do. I quickly discovered I was wrong. People who have been panning for years have muscle memory, they use traditional swirling and dipping motion without even thinking about it" said Washburn. "For most people that have been panning for a while, their old techniques have become subconscious and they have to unlearn and retrain their brain and muscles to stop swirling and washing and instead to start using the side to side shake and tilt method. I was surprised to find that it’s the newcomers that take right to it"
That pan sure looked like a gold ----- get-er.
I'm still sticking with my Garrett super sluice.
Thank again Dan for testing-er out 👍
I know, right?
I hope you stick to your Garret pan. Nice and slow
That is a massive pan.
I have a standard pan and found it easy to use, quick and did not loose much if any, once you get your technique correct.
Dan Hurd - keeping me sane in an insane world!
I’m nowhere near gold but I appreciate your videos! Keep up the good work and FIND ME SOME GOLD to watch! Love from North Carolina USA
i like these series of videos, good stuff! I hope you do more in the future after this series is done.
thanks!
I am really enjoying this series wish I'd seen it 10 years ago.. good job Dan
Dan another great video hell with the bad comments. It will keep someone from buying a bad pan. Good work! Glad to see you using tough panning material. Deward Taylor
Yes the technique caused some loss here. In a few places. Not bad for your first tries. I panned 100 litres of black sand from the beach during lock down. Tested with several pans and the gold claw was the best one by far with near 100 percent capture rate and it was fairly quick by the end. Imagine a pan with 95 percent black sand and the gold was powdered. Very difficult normally but with good technique it got it all enough times that i became confident in it.
Wow this one looks amazing! The tilting/shaking motion makes me a little nervous though. Also the ~80% capture rate is not bad considering you plowed through a half bucket it 5 minutes.
No, i think that capture was relatively OK considering what it is trying to pan and how fast.
I like the Gold Claw pans lot easier to use then the round pans . I was having trouble using the Gold Claw at first then seen the demo at a GPAA gold and treasure show and .Was shown the correct way of using it and tried it myself . I use the medium size pan of the pans of Gold Claw .Takes less time then if I could use the round pans , just can not get the round pans down on using them but I keep on working at using the round pans tried for years
Enjoy your videos keep them coming
Dan i appreciate you giving the creators the opportunity to prove their claims. Thanks Dan Troy
Dan, fair review for really being the first time using the Gold Claw pan. I know it's so hard to go against the muscle memory, and techniques you've used for years. The Gold Claws excel at plowing through dug unclassified dirt, and bringing it down to tiny amounts of concentrates. I look forward to the rest of your production pan reviews.
Thanks!
When I keep the most of the pan under the water the whole time made the difference for me it took a few times to get the feel. I wanted to swirl, now it seems I can’t swirl good anymore and choose the claws first now.
DAN, i have never used any sorta pan before just a sliuce , and miller table, so the 2 pans i have 1 is a garrett, wich belongs to my brother and i just got one thats called the best dammed gold pan, all the stuff i run is sifted down to 1/8th. in. thats cause the gold is almost fly poop in size, no matter if it comes from the beach or comes from creeks, so i am a novice when it comes to using pans,, thank you for the videos,, be safe, be strong, be free, be blessed
Just subscribed to the channel. I happened to find you when I couldn't sleep at 3 in the morning and become hooked. I grew up with my parents taking me to antique shows and yard sale so I get why you love the "treasure hunt".
Thanks and welcome to the channel!
This is one of the reasons that I subscribed ,,, your Honesty !!!!
I am thankful and it is truly appreciated !!!!
Thank you for all that you do !!!
Saw Clint at the gold show. Was sold after the demo
Enjoying the comparison videos. I have standard gold claw, still getting used to it, almost seems counter intuitive to use, but i actually like the small size because of less weight to panning even if it means taking longer to process a bucket of material. Great job on the video production. Thanks.
Well, I clicked on this video cause, I had never seen that type of gold pan. I'm like you I'm used to my regular pan.
Always enjoy your videos. I have this pan and have used it for some time. It is simple to use but one does have to develop their technique to use it properly. Best advice is pretty much forget everything you know about how to use a round pan when using this one. I have seen the manufacturer videos and they are good for understanding how to use them. I mine a lot of clay and dirt for gold. My tests indicate I have to go slower with it than the manufacturer shows. I also finish my cons in a Garret Super Sluice because of the muddy water. If I were stream side, I might finish the cons in the Claw. I am in the northern Sonoran Desert, not too many flowing streams or rivers around here. Final thought is they are great pans. The big production pan will require some good upper body strength even with a small scoop of material due to it's size and having to manipulate it under water. The next size down pan is absolutely great! The jury is still out on the pocket pan.
Very honest review. Thank you for that. NOW, you have earned my subscription. Keep up the great work.
Much appreciated!
I like that you are inviting the people who manufacture these products to your "real world" scenario. Any of them worth their salt will take you up on it! Dan you have a great number of subscribers, and these manufacturers know it! Let see if any of them take you up on it! Id love to see those videos! Heck lets get them all there at the sane time for a panning competition!
I would love to go head to head with them me with the super sluice and hem with their pans And honestly I would love their pans to out do me.
@@Danhurd Oh that...would be the best video you have ever put out! Oh oh oh...even better would be one with them...against all you RUclips guys...Klesh, Pioneer Pauly, Jerry from Califirnia Motherlode, Jeff Williams...especially Jeff...he prides himself on his fast panning...id love to see his percentage of recovery! HAHAHA!!!
Hi Dan, Nice job. I saw another demo that says don't jig side to side too much or you will lose some gold.. The guy showed a slightly more subdued jigging. and you do a little less as you go. i thought you did pretty good. Thanks for showing us. Also, It seems like everyone is demonstrating the small one. Thanks for doing the big one.. i like.
Panned out 3lbs. of pay dirt with a 2 gram guarantee using a small finishing pan with my garret SS for a catch pan. Recovered 2.08gr. but when I panned the tailings in the garret I recovered an additional .14gr. That garret caught some really small stuff and is actually the better finishing pan as well as being a great, nay, the best production pan on the planet.
Another Great Video Dan! Wow, what a beautiful spot you have there.
Hi Dan, I purchased Gold Claw pan but have not really had a chance to really use any yet. Thanks for trying out all of the pans.
you get 80% after 5 minutes. that's good arithmetic in my book. i should be able to make a good living with the gold claw compared to no gold claw.
Thank you for doing these evaluations. It helps your veiwers.
The inventor when demonstrating the regular size at a show made a point that it is hard to use for a person good at using a normal pan. Try keeping it submerged at all times. Just stratify. Slightly slower tipping rate might help.
No offence to the other guys but so far I'm liking that flat blue thingy you used in the video that showed all the pans.
Paul is on the cover of Gold Prospectors. Wow, so cool.
your so open to try everybody's pans without harsh judgement, that's a bonus, we will all learn from this and find out what works for "us"....but I gotta ask...if your using the same paydirt each time wouldn't it be getting easier each time by washing away the clay and stuck gold and ya know gravel and freeing the gold easier for the next time? I don't know! just asking...I just wanna learn! thank you for all you teach us..
The material was used before this test was filmed so it already broke any clay up. yes the first time it would be different, but any time after that is about the same.
That works great. GOLD SQUAD OUT!!
Although a nice looking pan. It would be too heavy for me too. As for the loss of the gold that is why a safety basin is a great idea in case you lose some.
Thank you for sharing.
Dan I hope you and your family and friends are staying safe and healthy.
;)
Dan, You did a great job on this review. I like how you decided to demo with comingled gravels vs pea gravel and fist-size rocks. I think that the gold claw is a great tool however I am not so sure that the stratification or liquefaction is effective enough to cause all the heavies to drop all the way to the bottom of the pan. Yes this pan catches paydirt bag size gold 30 mesh and larger however when dealing with small particles mass must be considered as well as density when observing gold in suspension. Other complaints are that it is necessary to have a deep washtub tub or a deep hole in a stream just to fit the vertical pan. That is annoying. When sampling an area I like to see all the gold however fine it may be knowing that most of the gold is pretty small.
Hi Dan. Thank you for the time you have taken to review all the pans available. It seems to me you are very balanced and equitable in your conclusions. The manufacturers are fortunate to have the benefit of your experience. Great job from (warming up slowly) Western Australia
I kinda like the look of this pan but I would probably want it about 6 inches less in width. I would also like to see a more gradual slope from the bottom to the big riffles. More like the slope on your Garret pan. As it is you have a very vertical side and then a sharp drop over the riffles which could easily allow flakes to wash over the riffles without touching them. I don't know if I explained that well but I hope you understand.
My little n medium are quick one tip I've noticed is cleaner water so u can watch the tailings n control the flow a little more
Love to see Dan do reviews
It does seem to be hard for the pro Paners to get used to the idea of the gold claws motions and techniques but for you all is forgiven thanks for sharing love the videos and glad you have a website I'm a avid dirt buyer and it's really cool getting something that I might have watched you gather Have a great day and prospect on
Saweeet. I’ve been waitin all day!!
Awesome
Rusty Barbacles lockdown getting to you too lol 😆
Hi dan the man great stuff I only used the Garrett so cant comment but love the view so beautiful that's what they mean buy saying its gods country wow awesome thanks Dan for your opinion be safe Dan getting itchy for pickertin cant wait
I thought you did a grand job using that pan.I have just received mine and new to me also.Clint showed me first hand-now my turn.Hoping I hope I do as well as you. David out
Another gem Dan. Thanks for providing quality content in these difficult times.
My pleasure!
I have on it works, still easier to use the Garrett's gold pan though. In my opinion a gimmick, fad or join the crowd type pan use your best judgement
Maybe I'll create a pan of my own and send it to you just so I get an invite to come over and pan some gold with you, because that sounds a heck of a lot of fun
sweet vid dan great to see the differant pans and what they can do
Dan, you're holding it up above the water too much and that's why it's very heavy. Submerse it deeper in a bigger Tub and it'll work fast like the other two Claw Pans.
Hi Dan-
Considering the videos are on production pans I will take 80% capture rate and move a lot more material.
Thank You for the educational videos I have learned quite a bit from you great job explaining everything !
Thanks!
Dan please demonstrate that the orange bucket with the lid on half filled with pay and water will also work to filter gold to bottom of the bucket j7st by sloshing it for few minutes
Yes shake side to side and I am
pretty sure you are suppose to keep the material under water at all times.
Good to know!
Interesting pan as well, but I'm like Dayna, don't want anything too heavy. Found myself moving my phone from side to side to help you pan it out. 😁 Another super video. Thank you.
That seems like a great solution for those who may be limited to panning only locations. They could easily concentrate large quantities of material. For regular panning I really prefer my Garrett super sluice gold pan!
Absolutely
Love the video. Always working hard
Thanks!
Dan the pan man....
Dan's the BEST!!!
prototypes can be a tricky thing Dan. When you first put it in the water I thought it was going to break at the part where they glued it 😂
hey dan , just got a set of these for christmas and got to try them out myself , they work pretty good for a novice like me.
These videos are helping me pick a good pan. Thanks again
Great to hear!
If you still have that specific half bucket of material you should maybe set it aside as the designated material for all future videos on these or other pans. That way only the pan and the user change, it will always be the same material.
You just can't beat the good old pan.
I saw this video but still decided to purchase one (It was obvious your technique was different than what I saw in the manufacturers demo video). I got it today and tested it on a bucket of black sand and was amazed at how much tiny gold I was able to recover. It really excels at quickly removing the black sands, something I can't do with the Garrett super sluice. I'm going to start using it for sampling and will test to see if works better for me in the field than the super sluice.
I hate to say it, but your reviews aren't going to carry as much weight with me now.
Thank you for the Info Dan and your videos are always fun to watch
Y'all a very honest guy Dan. I like that almost as much as your prospecting expertise. All the best from Naples Florida where the only gold you'll find is at the beach in lost jewelry and coins from shipwrecked Spanish galleons.
Another great test and another beautiful day at Pickerington
Great Job!. Pretty clear that you are doing your best to be as objective and impartial as you can be. Thanks Dan!
from the look of the way that pan is designed I would think you may get a better recovery rate with a more forward and back motion when panning it off, so the riffles would hold the gold back . might be something to try
Love these videos. Dan are you still teaching kids? I learned so much from your classroom settings.
I would like to see a control test. Using your normal pan, but going through all the material in 5 minutes too. I think that would give you an idea of what the other pans would do if you went at the same speed as you normally would.
I enjoy learning from your videos you make it simple to understand what you are trying to get across for me and it would be kewl to do some panning in person to learn even more anyway I love your videos
Looks like there was no better place to be to pan for gold great look
I like the fact that you are a novice with the new pans. I would be a novice using them so it is a big help!
That is my thought as well. Yes I made mistakes, but everyone will starting out.
Another great review and certainly with more practice with that pan or any pan especially when like you said it feels different not washing off the layers. Fraser looks awesome wishes it was that low now! Thanks
I totally agree! I'm itching to get back out on the Fraser
Just got the mini and midi gold class. Panned about a cup of paydirt from gpaa. I just did it dry without water. Somewhat similar loss but also my first time and no water. With water likely much better. Big contrast to pyramid pro which by it's shape limits the ability to agitate/stratification. P-pro may work better for that if rotated to agitate since sideways shaking tends to throw so much out. Not good if not first stratified. Also in both cases the amount of material processed, if too much, could contribute to the losses seen. Each pan should have a spec, the maximum volume of material recommended at each panning.
So yesterday a box shows up at my front door and inside is a new Garrett Super Sluice. I was a puzzled for a second on who would send it to me as I don't pan for gold or prospect. I then vaguely recall ordering it while watching your How to Pan For Gold Better video...(I may have had one too may beers). I guess I'm going to have to learn now (fortunately, my 87 year old dad lives in the California Gold Rush country and has access to a claim.) I guess I have a new hobby now.
So beautiful there! You did the testing just how I want to see it! Kind of a worst-case scenario for lack of better words! Thanks!!
You're welcome
I tried the small one and didn't put a lot in but kept the same angle working pretty vigorous only lost 2 little pierces
I have the smaller ones and they work great. Also have the Garrett Super Sluice, which I find a bit heavy if I fill it up. Buying all these different gold pans and sluices can get expensive, plus storage problems. You doing these reviews is a great idea! Thanks, Dan.
I like the fishing fly in the rocks lol
Awesome video Dan Hurd 👍👏
great show as always love it you just cant beat the super sluice