The m4 is a perfect gun to be blessed as a lefty. Actuation of the bolt release is a breeze. Where righties have to use the two finger technique, I can easily close it with my support hand thumb. Makes it sooo much easier. Not that its "hard", but easier is easier.
I just added a Carlson breacher choke, GGG singlepoint sling plate and Mlok handguard. It already came with the collapsible stock. I just had to install it. I love these shotguns.
@@monkeeshitz I take it you removed the OEM picatinny rail and then installed the Scalarworks mount afterwards? Also, which optic did you install on your Benelli M4? I ended up going with a Trijicon RMR mounted to the Scalarworks SYNC/01 mount. The only thing I'm scratching my head over at this point is whether or not achieving co-witness using the OEM ghost ring sights with the RMR is in any way practical? Let's face it, achieving co-witness either one third or full using BUIS on an AR10 or 15 platform is a breeze. The ghost ring sights don't seem to lend themselves very well when utilized with a red dot. However, I could be entirely wrong about this whole thing and I'm NOT afraid to admit that I've been wrong on more than just a few occasions. Lol! Any input regarding my post would be greatly appreciated. TIA
One of my favorites, definitely one I'd recommend to anyone. I actually found a pistol micro red dot the best, a little faster target acquisition for me. Cheers!
That M4 is a nice bit of Kit! Allot of whitetail (and turkey) have been taken with magnified optics on shotguns. The ACOG is a pricey way to go, but ...hey why not? Again,though: KSG needs a foregrip! I won't run mine without one. I recommend using one with two screws. More secure mounting less prone to failure.
Question...How did you add the Muzzle Brake? Was the barrel on this version already threaded? My M4/1014 does not have a threaded barrel to swap chokes. Thank you.
Nice that they dropped this video in my feed. I just upgraded a few things on my Pannzer. TODAY. And ironically enough, I just received put on and then removed that exact same RX arms Bolt release tab. It made it so that my MLok handgaurd would no longer seat properly in the grooves on the receiver. and loose. Actually calls the hangover.2 slip down just loading firing and dejecting training rounds.I can only imagine what would have happened if I would have taken it to the range and shot live ammunition. Do let us know how that works out with that bolt release attached.
If you want to put a full length magazine tube on your M-4, instead of the mag tube extension. Freedom Fighter Tactical has mag tubes in both high grade steel or titanium. Other parts are available too. Freedom Fighter Tactical makes all the parts needed for the 922R legal requirements comply with American legal restrictions.
Myself personally I’d rather have an MLok fore grip and only have rails exactly where needed, save a ton of weight, and pic rails + 12g = cheese grater lol
With the B&T hand guard, is there a small gap between the barrel ring and the receiver? There’s a tiny gap on mine and though I haven’t shot it yet after installing.. it’s a bit concerning since with the OEM hand guard, the barrel ring sits flush against the receiver.
So far so good. Mine has a lot more through it than that and hasn't failed. I do have an aftermarket enlarged one in it though. Forgot to mention that in the video.
You definitely have a lot of good upgrades. Only one additional item would be good to add. A shell carrier from Asgard Defense to put on the right side of the fore arm's piccatinny rail. Holds two shells in line with the ejection port. All you have to do is grab one shell and slide the shell straight back into the ejection port for a quick tactical load. Watch the John Wick movies to see how it works. John Wick #2 & #3 movies has scenes where Keanu Reeves uses a single shell holder to shoot one last assassin. The Asgard Defense carrier can hold two shells for those possible "oh crap" situations.
Just picked up a benelli M4. Trying to get a pistol grip or adjustable stock for it. In Washington you can’t sell tactical shotguns with a pistol grip.
Benelli M4 is simply the best home defense weapon available IMO..all these accessories like red dots and quad rails are useless and take away from the ergonomics of the broomstick ...a flashlight, iron sights and an upgraded bolt handle that’s how I roll
I don't think it needs anything other than the 7rd mag tube. It's a shotgun. In the home, at night, aiming by ear is good enough... well... maybe mount a flashlight on it.
@@yurikfarba7169 a red dot with the “circle of death” is a must have, especially for close range defense. Patterning your loads and knowing all your pellets will be in that circle ⭕️ could save a life of an innocent, in a hostage situation or behind the target.
@@michaellabus6447 hostage situation? Lol def not trusting the “circle of death” and 12ga 00 buck shells under duress to be surgically precise. To each their own but iim better with the Benelli iron sights… AR at the range or a hunting rifle get optics but my under the bed boomstick has to be dependable
That's a tough one. I am going to do an accuracy video on both soon. I really, really like the apc308, but the xcrm has better ergs/controls imo, and has the ability for calibre conversions, so I am going to stick with it for now.
Does it still function with all those bells and whistles on it? I but the mesa tactical shell carrier on M-2's and it no longer functioned with light loads. The added weight changed the inertia.
I want your budget lol a trijicon acog on a shotgun I know its a bad ass benelli but still a 1000 dollar magnified optic on a shotgun is like a marine using a presidential rolex too keep time in combat
Hey, love ur content. I am thinking of buying this shotgun in Canada, do these shotguns also have to be less than 5 rounds in ammo capacity to become non- restricted? Or only for rifles magazines?
Benelli, a classic.
The m4 is a perfect gun to be blessed as a lefty. Actuation of the bolt release is a breeze. Where righties have to use the two finger technique, I can easily close it with my support hand thumb. Makes it sooo much easier. Not that its "hard", but easier is easier.
I just added a Carlson breacher choke, GGG singlepoint sling plate and Mlok handguard. It already came with the collapsible stock. I just had to install it. I love these shotguns.
That slide release piece of metal looks like it would peel the skin off your hand pretty good.
Duct tape
I was thinking the same thing
I’m sure you can get the edges rounded off.
@@colinvassall2658 Duct tape, eh? Sounds totally ghetto. Lol! Not on a shotgun with an MSRP kissing two grand but hey, to each their own!
You had me at “Hey guys”
I just got a Benelli M4 H20, you’ve just gave me ideas to mod this beast!!
Go check out ScalarWorks optic mount for the Benelli you won’t regret it
@@monkeeshitz I take it you removed the OEM picatinny rail and then installed the Scalarworks mount afterwards? Also, which optic did you install on your Benelli M4? I ended up going with a Trijicon RMR mounted to the Scalarworks SYNC/01 mount. The only thing I'm scratching my head over at this point is whether or not achieving co-witness using the OEM ghost ring sights with the RMR is in any way practical? Let's face it, achieving co-witness either one third or full using BUIS on an AR10 or 15 platform is a breeze. The ghost ring sights don't seem to lend themselves very well when utilized with a red dot. However, I could be entirely wrong about this whole thing and I'm NOT afraid to admit that I've been wrong on more than just a few occasions. Lol! Any input regarding my post would be greatly appreciated. TIA
Do you have a list of the accessories used here?
One of my favorites, definitely one I'd recommend to anyone. I actually found a pistol micro red dot the best, a little faster target acquisition for me. Cheers!
Nice, yeah I have admired some setups with the low mount with trijicon rmr
I was sold on your M4 build then you tease me with the other gun at the end of the video.......I want both!! Nice job on the builds!!! :-)
That M4 is a nice bit of Kit!
Allot of whitetail (and turkey) have been taken with magnified optics on shotguns. The ACOG is a pricey way to go, but ...hey why not?
Again,though: KSG needs a foregrip!
I won't run mine without one. I recommend using one with two screws. More secure mounting less prone to failure.
It's all fun and games until your realize that little piece of metal at 1:35 retails for $31.
Lol that is Crazy
bolt release is still available on rxarms. just bought it for my super 90. thanks for a tip.
How much does this thing weigh with the extras bolted on there?
Damn, I'm actually really happy to see our Canadian neighbors get more into guns.
orlando carranza this comment didn’t age well. They are turning their guns in as we speak. 😂🤣😂
@@CaptainCreampie69 well shit, it was good while it lasted
@@CaptainCreampie69 Only some of the guns are banned. M4 is all good, not banned.
@@Philippe_Lavoie ou tu pognes les gear au qc?
We have always been into guns... we don't have the rights you do
Awesome!! Was really looking forward to a video like this :)
I can’t imagine anything that would make that gun cooler than that!
That’s like the ultimate tactical shotgun, nice!
Beautiful Shotgun Great vid
Question...How did you add the Muzzle Brake? Was the barrel on this version already threaded? My M4/1014 does not have a threaded barrel to swap chokes. Thank you.
That side saddle is so sweet the new le has a bigger bolt drop I guess you call it
Looks awesome ,can I have the all option list of Upgrading of M4 please and where can purchase all from.
Thanks
honesty, the bare m1014/m4 looks best
Nice that they dropped this video in my feed. I just upgraded a few things on my Pannzer. TODAY. And ironically enough, I just received put on and then removed that exact same RX arms Bolt release tab. It made it so that my MLok handgaurd would no longer seat properly in the grooves on the receiver. and loose. Actually calls the hangover.2 slip down just loading firing and dejecting training rounds.I can only imagine what would have happened if I would have taken it to the range and shot live ammunition. Do let us know how that works out with that bolt release attached.
no cup holder?
Do you have a list of the accessories used here ? or the website you bought?
This person knows what he is doing
If you want to put a full length magazine tube on your M-4, instead of the mag tube extension. Freedom Fighter Tactical has mag tubes in both high grade steel or titanium. Other parts are available too. Freedom Fighter Tactical makes all the parts needed for the 922R legal requirements comply with American legal restrictions.
Completely illegal in Canada
Ghost load
Myself personally I’d rather have an MLok fore grip and only have rails exactly where needed, save a ton of weight, and pic rails + 12g = cheese grater lol
Haha I hear you. I am looking closely at the Strike Industries forend for the m4.
Keltec Jumpscare. Still a sweet gun though.
You may want to take up boating. Your collection is amazing btw.
Donald Trump's Geissele URGI gas block me three 😧😟
Great upgrade options! Gonna be getting my M4 here shortly and your vid was exactly what I needed for some ideas.
John Wick would be proud. Very sexy shotgun
Why no listing of parts suppliers in your description?!
Very clean
My barrel has a fixed/improved choke. Where do i get one like yours that i can thread my own choke in
Did you ever have any problems with the B&T quad rail?
That thing looks heavy as hell.
With the B&T hand guard, is there a small gap between the barrel ring and the receiver? There’s a tiny gap on mine and though I haven’t shot it yet after installing.. it’s a bit concerning since with the OEM hand guard, the barrel ring sits flush against the receiver.
What’s your update on that hand guard ? I just bought one but I’m reading it destroys your shotgun! Is this true ?
Ladies and gentlemen... the 23 pound m4. Never thought the m4 could be ugly but u proved me wrong. A light sure but everything else is so unnecessary
What manufacture/ part is your QuadRail? 👍
With your adjustable stock and tube extension does it put that gun in 922r violation?
I’ve been wanting to add a tube extension on my M4.
Good video. New to firearms . Interesting to see how all these upgrades fit on this gun.
Where did you get the quad-rail?
🤨"May I suggest, the Benelli M4. Custom bolt carrier release and charging handle, textured grips should your hands get...wet. An Italian classic."
You can throw a vertical grip on that ? Isn’t that too short
ATF has defined vertical as 90 degrees to the Bore of the barrel
keep an eye out for the charging handle - had mine fell out after about 100 rounds at the range (mostly target loads)
So far so good. Mine has a lot more through it than that and hasn't failed. I do have an aftermarket enlarged one in it though. Forgot to mention that in the video.
MrTONYTONYM what size and brand did you get?
in your opinion this is the best shotgun 12 there is, or there are other better?
Great update
What brand is that foregrip? It matches perfectly with Benellis handgrip
I personally dont like that bolt release i have a gg&g oversized bolt release but everything else is pretty solid
You definitely have a lot of good upgrades. Only one additional item would be good to add. A shell carrier from Asgard Defense to put on the right side of the fore arm's piccatinny rail. Holds two shells in line with the ejection port. All you have to do is grab one shell and slide the shell straight back into the ejection port for a quick tactical load. Watch the John Wick movies to see how it works. John Wick #2 & #3 movies has scenes where Keanu Reeves uses a single shell holder to shoot one last assassin. The Asgard Defense carrier can hold two shells for those possible "oh crap" situations.
Where can one get the upgrades, adjustable stock and front RIS set up. Please show a build out. Thanks
You're a beautiful man. i want this gun and upgrades!!! /cries
Super nice scatter gun ! ☠💀☠
What handguard is that?
Does it wobble any?
Does the muzzle break make the shotgun a lot louder?
Just picked up a benelli M4. Trying to get a pistol grip or adjustable stock for it. In Washington you can’t sell tactical shotguns with a pistol grip.
Benelli M4 is simply the best home defense weapon available IMO..all these accessories like red dots and quad rails are useless and take away from the ergonomics of the broomstick ...a flashlight, iron sights and an upgraded bolt handle that’s how I roll
I don't think it needs anything other than the 7rd mag tube. It's a shotgun. In the home, at night, aiming by ear is good enough... well... maybe mount a flashlight on it.
@@ladamyre1 exactly my point ...red dot is not going to help you shooting 00 buck at 10 yards
@@yurikfarba7169 a red dot with the “circle of death” is a must have, especially for close range defense. Patterning your loads and knowing all your pellets will be in that circle ⭕️ could save a life of an innocent, in a hostage situation or behind the target.
@@michaellabus6447 hostage situation? Lol def not trusting the “circle of death” and 12ga 00 buck shells under duress to be surgically precise. To each their own but iim better with the Benelli iron sights… AR at the range or a hunting rifle get optics but my under the bed boomstick has to be dependable
This is awesome, is like call of duty gun customization irl!!!
Would it be possible to put up a parts list with links?
Where did you purchase those accessories from? Do you have link?
Thanks in advance.
Wow that is a good idea!
What kind of mount do you have for your aim point ?
Hey @arm&gun my B&T quad rail broke off my magazine tube holder while firing it at the range. Do you have any insight why that might have happened?
What pichanny rail is that, the one I bought wouldn't work on mine
Hi arm&guns do you have the link for the hand guard and the shell holder ??
I love that setup
So, what's the total weight now?
Where did you get your rail system at? I like that. I have the m4 but nothing has been modified on it yet.
Where did you get the larger bolt knob?
I don't think you mentioned that.
hi friend. i have a benelli m4. does the muzzle brake decrease the recoil so much? please answer me cuz i would like to buy it
I knew you'd change your mind on the NForce location...
Any issues with the B&T hand guard ? I read it damages your shotgun ! Is this true?
Tried to score one of those Enhanced Bolt Releases from RX but I was too late. :( Sold out. Thanks for posting videos on the M4. Very entertaining.
The “bubba stick” extended bolt release
Thanks now I want one !!!
Love it!
hi unrelated question, which gun would you pick if you had to pick one for life? b&T acp 308 or the xcr 308??
That's a tough one. I am going to do an accuracy video on both soon. I really, really like the apc308, but the xcrm has better ergs/controls imo, and has the ability for calibre conversions, so I am going to stick with it for now.
I wish RX had a restock of the bolt release paddle. The only other ones I found were for M1/M2's
Hey man how has that Carlson choke/breaching device worked? Does it pattern well?
i like the slik look of the M4 with traditional stock and foregrip. This Benelli is cool but to much tacticool for me;)
loved it
With the B&T rail, it seems the set screw on top digs into the barrel? Does this damage the barrel?
Does it still function with all those bells and whistles on it? I but the mesa tactical shell carrier on M-2's and it no longer functioned with light loads. The added weight changed the inertia.
The m4 ARGO system is a piston system. It doesn't have the shortcomings of an inertia system.
can you list the brand and where the pic rail and side saddle is from? thx.
Why so much hate on modding the m4? Looks good imo.
They're mainly calling out the weight I believe, which is a valid point the guns are heavy naked.
does a benelli m4 without pistol grip exist?
Can you tighten the light attachment?
12 gauge is ok i would like this benelli in 10 gauge or even custom made 8 gauge that would be sick!!! Remember BIGGER IS BETTER
Any sling recommendations?
would have been nice going through prices
I want your budget lol a trijicon acog on a shotgun I know its a bad ass benelli but still a 1000 dollar magnified optic on a shotgun is like a marine using a presidential rolex too keep time in combat
Probably he already has the optic and just wanted to goof around.
Is this gun more pleasurable to shoot over any other 12 G shotty? I hate shooting shotguns cuz they arent too much fun .
Yes....recoil is typically lower and it's just an incredibly well made shotgun that performs very well. You will like it
Look good but its getting heavy with all your upgrades :) I still like it
Superb bro
Hey, love ur content. I am thinking of buying this shotgun in Canada, do these shotguns also have to be less than 5 rounds in ammo capacity to become non- restricted? Or only for rifles magazines?
You could have got one before the ban
The guy that bought everything he could for this gun, took 2 classes, then repeated everything he heard in the class
More is not always better… and yes I’m poor thanks to Biden FJB
Hello can you get that outfitted before you buy it
Are these mods legal in most states? Utah?
Does that choke work well with slugs?
Is this the 11707 model?