Would definitely like to see it modded. Hoping the FMS wagons provide some competition and another solid platform for 1/24th. My 1/24 Deadbolt was just OK out of the box, but almost a year later all modded up it's a tiny beast.
Yes, a rematch is in order!!! The FMS looked quite spunky out there. Unhook the band for battery, give it a half twist coming over the top. Should solve that issue. Diggin the banter between you two cats as well. Makes this hobby fun with more than one person. Great video and keep them coming!!
An SCX24 with a thousand dollars in upgrades VS a 150 dollar stock truck the FMS is very impressive. Parts are the worrisome part I have looked metal portal gears are available but steering knuckles, ring and pinion the stuff we will break IDK. Love the FMS but still leaning towards SCX for my first 24th scale crawler. Great video.
Two thing I don't like on the fms are the body fixings, one clip broke first time I had to remove for battery recharge. The other the cheap way the battery is secured. I discarded the roll bar and spare wheel, made a flat bed from coffee stirrers and secured it from below using two small self tapping screws. The battery wires extended so battery now sits in a box within the flatbed which is much easier when battery needs a charge. Otherwise a lovely truck which gets used regularly.
Definitely would like to see them again on your inside mini crawler course. It would be interesting to see if some of those RC AWD parts you mentioned would fit too. I do like the body style better than the SCX24, but I wish the wheelbase was a bit longer.
Give that rubber band that's supposed to hold the battery in place a 180 degree twist over top of the battery, so that it criss-crosses over the battery. Bet that'll work.
It looks like if you want to upgrade your scx24 one more time, you could move the rear axle back 10mm on the FCX24 and move the blue body to the FCX24. There you go, all the upgrade you'll need. Well, check if the portal gears came in metal, if not, change them! (Just having fun, you know 😀)
Hey Guy; You see you have a good channel fun, informative, and you knowlegable too about RC's...This is the only RC channel I'm subbed to for what going on 2yrs now and personally I've learned a lot from your channel and I own swag too.. In all thanks for your channel and your postings 👍👍😎🍻✌
you twist the rubber band in an X to hold the battery. Use your pinky to turn the switch on and off, i have huge hands and have no issue turning mine on and off. I actually like these body clips but they just take a bit to get used to but they hold WAY better than the Velcro or magnets. This truck is awesome for the price.
So far I have only done few free mods, remove the spare wheel and transparent window part, shortened the shock springs by about 3mm, moved the battery behind the motor, turned ESC 90 degrees, free metal gear from FMS, move the screws on the front portal axles to the other side (back) for greater steering angle..... gonna 3D print reinforced steering links and possible a new frame to replace the hard body.
loved the review man, not a bad little truck, putting it up against a tricked out axial with longer wheelbase is a bit unfair tbh, but it is what it is. Once you have a few upgrades on it it should be a pretty good competitor......... i get the feeling you secretly like the little guy. Keep them coming
That’s awesome, I bet you’re glad you did now. I have the red one, I love it I got the limited edition one just learned it has been shipped on its way can’t wait for that one it’s red white and blue yeah, I’m here watching from Manchester Michigan. This power wagon has become my favorite Rig’s
I am glad you did a review on these 24.I was thinking of buying one,like i need another 24.I know you can!t have to many? I would of liked to see you running a stock Gladiator,and seen how they compare.Also would be interested what kind of after markets will fit,if they have any.Please let us know.Another great video,Happy RC and stay safe everyone☮
Treal wheels that come with the wheel hub extenders are supposed to fit. I have a set I'm about to try. Also fill oil shocks using the little O-Rings. There are some nice 3D printed parts on EBay by McCue RC. Every truck comes with a little goodie. It's my first 24th scale, and I think it's pretty sweet.
Treal has some brass parts for it! They are pretty cool little rigs! I definitely like FMS over Axial but that's just me. Im more impressed with the FMS making it as far as it did than the scx. I know how much upgrades that scx has lol
Yeah awesome you got the red one, it’s such a awesome color, Tinker time RC has roll cages and flatbeds just a little modification , Fits on perfectly, they are pretty awesome has different styles
Yeah I got a special package with mine, it was just the servo mount, peoples been getting one out of five or six different things they have something like that. You got the inner portal covers that’s awesome
I bought two FMS 6x6 Atlas’ and both were bad out of the box. Warped plastic motor plate on one and broken axles on the second that looked to be packaged that way. Considering my personal experience, I’ll stick with my fleet of SCX24’s and the new TRX4 M
I have one of these little beasts on the way, also some Treal steel portal gears, that should put some weight low down and beef up the drive train. Treal also do portal weights too
That little guy did pretty good out of the box. Now it needs a real challenge and run against my Element 24... Oh wait never mind. The FMS would kick my butt. Lol
Please hop up that truck. Bought 2 scx24s, but held off on the fcx because of aftermarket parts availability. I'd be interested to see if they match up and what is interchangeable.
Just got mine in the mail today, and yeah, the transmitter is very small and cheap looking, doesn't stand up like my other transmitters, even the one that came with a little $59 car came with a bigger transmitter. Mine has rubber on the wheel and but doesn't have the dip switches....
Interested in testing my moa kit for it? Still working on it but... building list of testers for it now. Hopefully done by the end of September. Waiting on hardware and still gotta figure out what platform to sell it on..
@@10thScaleGarage yea when you invert that V pattern loose soil or whatever you are going over , is moved toward the center of the tire as it rotates instead of siping it out to the sides which is what that tread pattern was designed for . Its good for keeping the tire clean but its not good for climbing rocks or loose terrain but invert the v pattern and its a total game changer. Someone told me this secret years ago to help my tamiya lunchbox to be able to get to the top of a hillside that i was struggling to get up. Trust me when I tell you i switched the two rear tires around and it climbed up the dirt hill like a pro
God I wish they made this truck in 1/16, I'm old and the 1/24 category is just to hard for me to work. Fms is an awesome company I've recently bought the jimny and the jeep and I love them. I can't stand axial cheap and low quality plus way overpriced.🙏😎✝️☮️
@@joecole6875 They are both 1/6, if you leave them stock they really don't need anything they are fantastic my jeep is stock except for accessories. The jimny I had to do some work on it only cause I wanted slightly more crawler abilities so it required some mods. I have videos on both🙏😎☮️✝️
I’m sure someone already said this and it’s still a crap design but the rubber band should be twisted when you pull it over the battery to hold it in place. I had to “read the book” to find that out and no one should ever have to read the manual lol
Who is everyone? Not a single person I know who crawls has this or any bangood stuff. They do have the associated/element stuff and the axial scx24. My 5 local hobby shops don't even carry that stuff lol
I want so bad to like the little FMS.. but changing the wheels and tires seems sinful because they're part of its look. I bought their Atlas 6x6 (1/18) and it looks sooo cool but is so disappointing that I'm returning it. I can't find any tires for it due to the scale difference, and the tires are terrible. If you're on rock, they're fine, but on anything other than a hard surface and even with 6wd, they don't work. I don't have room for shelf queens, so if it doesn't earn its keep, I'm not keeping it.
I don't think I have been more disappointed with an rc than I have been with my scx24. that being said it sounds like if you spend 5 times the purchase price on upgrades they are slightly better! lol
Would definitely like to see it modded. Hoping the FMS wagons provide some competition and another solid platform for 1/24th. My 1/24 Deadbolt was just OK out of the box, but almost a year later all modded up it's a tiny beast.
Yes, a rematch is in order!!! The FMS looked quite spunky out there. Unhook the band for battery, give it a half twist coming over the top. Should solve that issue. Diggin the banter between you two cats as well. Makes this hobby fun with more than one person. Great video and keep them coming!!
An SCX24 with a thousand dollars in upgrades VS a 150 dollar stock truck the FMS is very impressive. Parts are the worrisome part I have looked metal portal gears are available but steering knuckles, ring and pinion the stuff we will break IDK. Love the FMS but still leaning towards SCX for my first 24th scale crawler. Great video.
Two thing I don't like on the fms are the body fixings, one clip broke first time I had to remove for battery recharge. The other the cheap way the battery is secured. I discarded the roll bar and spare wheel, made a flat bed from coffee stirrers and secured it from below using two small self tapping screws. The battery wires extended so battery now sits in a box within the flatbed which is much easier when battery needs a charge. Otherwise a lovely truck which gets used regularly.
Definitely would like to see them again on your inside mini crawler course. It would be interesting to see if some of those RC AWD parts you mentioned would fit too. I do like the body style better than the SCX24, but I wish the wheelbase was a bit longer.
Those shock spacers made me laugh considering the size of normal spacers, love the in-depth feel of the video too!
I love how you talk down on the battery tray when you just can’t comprehend it . 🤦♂️
🤣🤣🤣🤣🤣 Fr
Give that rubber band that's supposed to hold the battery in place a 180 degree twist over top of the battery, so that it criss-crosses over the battery. Bet that'll work.
It looks like if you want to upgrade your scx24 one more time, you could move the rear axle back 10mm on the FCX24 and move the blue body to the FCX24. There you go, all the upgrade you'll need. Well, check if the portal gears came in metal, if not, change them! (Just having fun, you know 😀)
Yes would love to see a 2nd rd after modding it some to compete w/the axial. Great video once again.
Hey Guy; You see you have a good channel fun, informative, and you knowlegable too about RC's...This is the only RC channel I'm subbed to for what going on 2yrs now and personally I've learned a lot from your channel and I own swag too.. In all thanks for your channel and your postings 👍👍😎🍻✌
you twist the rubber band in an X to hold the battery. Use your pinky to turn the switch on and off, i have huge hands and have no issue turning mine on and off. I actually like these body clips but they just take a bit to get used to but they hold WAY better than the Velcro or magnets. This truck is awesome for the price.
So far I have only done few free mods, remove the spare wheel and transparent window part, shortened the shock springs by about 3mm, moved the battery behind the motor, turned ESC 90 degrees, free metal gear from FMS, move the screws on the front portal axles to the other side (back) for greater steering angle.....
gonna 3D print reinforced steering links and possible a new frame to replace the hard body.
loved the review man, not a bad little truck, putting it up against a tricked out axial with longer wheelbase is a bit unfair tbh, but it is what it is. Once you have a few upgrades on it it should be a pretty good competitor......... i get the feeling you secretly like the little guy. Keep them coming
that's awesome they sent you that,cool rc and great review
Please press the link below
ruclips.net/channel/UCj1sVqdKzSf7YKBdCyp30VQ
That’s awesome, I bet you’re glad you did now. I have the red one, I love it I got the limited edition one just learned it has been shipped on its way can’t wait for that one it’s red white and blue yeah, I’m here watching from Manchester Michigan. This power wagon has become my favorite Rig’s
I am glad you did a review on these 24.I was thinking of buying one,like i need another 24.I know you can!t have to many? I would of liked to see you running a stock Gladiator,and seen how they compare.Also would be interested what kind of after markets will fit,if they have any.Please let us know.Another great video,Happy RC and stay safe everyone☮
Would love to see you guys give it a second go at it with the hop ups for it.
Treal wheels that come with the wheel hub extenders are supposed to fit. I have a set I'm about to try. Also fill oil shocks using the little O-Rings. There are some nice 3D printed parts on EBay by McCue RC. Every truck comes with a little goodie. It's my first 24th scale, and I think it's pretty sweet.
Treal has some brass parts for it! They are pretty cool little rigs! I definitely like FMS over Axial but that's just me. Im more impressed with the FMS making it as far as it did than the scx. I know how much upgrades that scx has lol
I’m sorry, I liked the video and I think that FMS is super sick, but why did you make your scx24 look like a mall crawler 😂
Spiderman gladiator
Yeah awesome you got the red one, it’s such a awesome color, Tinker time RC has roll cages and flatbeds just a little modification , Fits on perfectly, they are pretty awesome has different styles
Yeah I got a special package with mine, it was just the servo mount, peoples been getting one out of five or six different things they have something like that. You got the inner portal covers that’s awesome
I bought two FMS 6x6 Atlas’ and both were bad out of the box.
Warped plastic motor plate on one and broken axles on the second that looked to be packaged that way.
Considering my personal experience, I’ll stick with my fleet of SCX24’s and the new TRX4 M
Awesome video. Would love to see a video with a bunch of aftermarket parts slapped on that. You clean up pretty nice bro. LOL
Giggidy Giggidy😎 you deserve the props brother, on side note, good luck with your Browns this year, [ go bills ]
I have one of these little beasts on the way, also some Treal steel portal gears, that should put some weight low down and beef up the drive train.
Treal also do portal weights too
It's a worthy competitor with a little TLC .
Welcome to 24th scale .
I do believe that treal has part's for them now. Great video 👍👊😎
Out of the box this struggle on our course compared to the SCX24 but a few mods and it's definitely a good rig.
That Kramer phot duude😂😂love it more than the 2 cars
That little guy did pretty good out of the box. Now it needs a real challenge and run against my Element 24...
Oh wait never mind. The FMS would kick my butt. Lol
Seems TREAL and Furitek are doing some great upgrades.
Please hop up that truck. Bought 2 scx24s, but held off on the fcx because of aftermarket parts availability. I'd be interested to see if they match up and what is interchangeable.
Keep wheelin til something breaks, upgrade and repeat !
Cool little truck. It rips on high!👍🏾👊🏾✌🏾
I put the battery tucked in on the front of the truck.
Furitek has thier micro komodo motor mounted on the fcx transmission for sale now
Great Video can we see a return of the Drag Slash bro
I want one, just got the atlas 6x6.. I would love to see what scx 24 parts fit this
Just got mine in the mail today, and yeah, the transmitter is very small and cheap looking, doesn't stand up like my other transmitters, even the one that came with a little $59 car came with a bigger transmitter. Mine has rubber on the wheel and but doesn't have the dip switches....
Had to glue my tank also!
Interested in testing my moa kit for it? Still working on it but... building list of testers for it now. Hopefully done by the end of September. Waiting on hardware and still gotta figure out what platform to sell it on..
I think you could plug wire into the empty one and run it to the back for tail lights but I’m not positive that’s what I’m just thinking
SOME weight is good for crawling though, especially small scale, otherwise they just bounce over obstacles
Mine came with the O-rings for you could put oil in the shocks
Thier support is great from what I seen and after market part makers are jumping on also
Imo these are a step up from scx24s. Now scx needs to respond with more upgrades. Some sick hybrids of both out here also
Good evening bro always great video nice review cool truck
Why did you use 2nd for the gate keeper challenge with the power wagon? Could have crawled the whole way up
It needs the wheel speed.
Ya we need a rematch
Have a good week nice information
The 6x6 has the flip
Up body, they should’ve done that with this too
Twist the battery strap to make an X across.
If you turn those tires the other way around you will get so much more traction
Good idea
@@10thScaleGarage yea when you invert that V pattern loose soil or whatever you are going over , is moved toward the center of the tire as it rotates instead of siping it out to the sides which is what that tread pattern was designed for . Its good for keeping the tire clean but its not good for climbing rocks or loose terrain but invert the v pattern and its a total game changer. Someone told me this secret years ago to help my tamiya lunchbox to be able to get to the top of a hillside that i was struggling to get up. Trust me when I tell you i switched the two rear tires around and it climbed up the dirt hill like a pro
God I wish they made this truck in 1/16, I'm old and the 1/24 category is just to hard for me to work. Fms is an awesome company I've recently bought the jimny and the jeep and I love them. I can't stand axial cheap and low quality plus way overpriced.🙏😎✝️☮️
The Jimny is a lot of fun. Is that the 1/6 scale or the 1/12? I haven't tried the 1/12 yet.
@@joecole6875
They are both 1/6, if you leave them stock they really don't need anything they are fantastic my jeep is stock except for accessories. The jimny I had to do some work on it only cause I wanted slightly more crawler abilities so it required some mods. I have videos on both🙏😎☮️✝️
Nice rock crawlers cool course
Cool video, but I just can't get into going so slow with my RCs, lol... 😅 Guess it's not my thing.
I’m sure someone already said this and it’s still a crap design but the rubber band should be twisted when you pull it over the battery to hold it in place. I had to “read the book” to find that out and no one should ever have to read the manual lol
Bro! I tried that, but it was so dang tight it felt like it was going to snap.
If you can only get one get the scx24 100%. The power wagon is cool looking but QC seems poor.
Nice video and small scales Rc , subscribes done bro
ill stick with scx24
bro why is it 75 in you space? thats to hot bro crank that shit down!! sorry im a hvac tech and i notice shit like that lol
because theyre all excited about my moa kit for it! jk....but they should be.....scx24 cant touch it
Its cool, but not really a 1/24. Scx24 still rules. But anyway I'll get one of this 😁
Everyone likes the scx24 but it is not the best out of the box crawler. The HBX Devistator crawler is way better at crawling than any scx24.
Agriculture Tires
Poor man’s scx24
wpl C24-1 much better ^^
Please modify sir
Who is everyone? Not a single person I know who crawls has this or any bangood stuff. They do have the associated/element stuff and the axial scx24. My 5 local hobby shops don't even carry that stuff lol
Popular on RUclips and 24th scale guys
I want so bad to like the little FMS.. but changing the wheels and tires seems sinful because they're part of its look. I bought their Atlas 6x6 (1/18) and it looks sooo cool but is so disappointing that I'm returning it. I can't find any tires for it due to the scale difference, and the tires are terrible. If you're on rock, they're fine, but on anything other than a hard surface and even with 6wd, they don't work. I don't have room for shelf queens, so if it doesn't earn its keep, I'm not keeping it.
this would be a HARD PASS for me....good review though :)
I don't think I have been more disappointed with an rc than I have been with my scx24. that being said it sounds like if you spend 5 times the purchase price on upgrades they are slightly better! lol
turn your front shocks inward LCG improvement 100%
@@ah6352 lies but ok lol
@@ah6352 how many servos and motors have you been through?
@@ah6352 that's cute have a good night buddy!
@@ejlucas93 so if the vehicle is $140 you're trying to tell me you have to spend $700 just to make it worth while? You're the liar and the idiot 🤣
armma.... sad basher