I just got my Kawazaki hone, and the garage filled it up too much!!! 😢 I will definetely try to remove some now - following your great DIY video! Fingers crossed! ❤ Thank you so much for sharing this! 😊 Greetings from Sweden! 🇸🇪
@@MC-qj2zd lol guess so. There's so much content out there that is more beneficial, quicker! I just stop the vids if they don't stop rambling within 15 seconds.
The only thing that needed addressing wasn't: the problem of letting out just a small amount of oil while all of the oil is trying to rush our. Thanks for nothing.
This helped so much thanks. Quick question if you get to this comment. I have a 2020 636. When I'm riding, I feel a slight stutter every half a second. It's causing the exhaust sound to move up and down ever so slightly. Like vrooooOOoooOooOooOooOooOoom . But it's ever so slight. When it's making that wave I can feel that wave on my foot pegs. I can't figure it out.
Hey @DeadDogs Bark. We're really glad that we could help you with this video. Regarding the issue that you're having at the moment with your bike, I think it's best to visit a mechanic that can physically inspect the matter and give a comprehensive report. With the Castrol Workshop map available below, you can find the closest certified Castrol Service to you. Through our network of Castrol SERVICE and Castrol AUTO SERVICE workshops, you can be confident that your complete service needs are in the hands of mechanics that are committed to friendly service and quality maintenance. Link to Workshop Map: on.bp.com/3LYLs1g Have a nice day. Team Castrol
I managed to drain the excess oil after realising the bike wasn't flat but with kickstand, but i did run the bike for 5 mins with the excess oil condition. Does it cause major problem to the bike? thanks
I did put a bit more than needed. Try to remove it with a syringe and got it stuck in the engine. When I tried to pull the pipe it broke. Was lucky enough to pull it out with a needle nose. Still scared that there are plastic debris inside the engine case.
It's easy, you just screw it back in. When you press it up to the hole it will stop the flow. I literally did mine twice yesterday to get the right level
I actually did, on my Suzuki so 650 1 gen and now there is some oil in stator, bike won’t start battery goes dead very quick. Any advice from professionals?
Hi, Wojciech Rudek. For professional advice, we always recommend visiting the closest Castrol workshop. You can find it on the Castrol Partners Map below: on.bp.com/3ztMtaE Hope this helps.
Between F and L ? That’s crazy. Full is at F. If the engine uses some oil you can be save at “between” F and L. Just fill it up to F, and a little to much doesn’t hurt your engine. It’s actually realy hard to mess up your engine with to much oil. Couse you need to fill it up all the way. And then you pored Liter to much in it. And that will never happen. As long as there is enough room for the oil to move. Then you never blow up your engine. It’s mostly over reacted. So a little over Full, no problem. Poring another Liter in. Then it’s questionable 🤨.
You are kidding me! If you put too much oil in your engine let a little bit out? If you haven’t worked that one out you should be working on a bike at all
Hello, Jamie Powell. We're sorry to hear about this and would like to know more. Are you able to send us a private message on Facebook with all the details? Thanks ^ Team CASTROL
Why don’t you tell the world how it should be done then. I will add that this method he suggests is fine. I would personally block the drain plug hole after siphoning some oil off with a conical plug and then refit the sump plug with a new crush washer.
@@robertprosser6856 Haha how is this a bad way of doing it? The way you suggest doesn't work for every bike as clutch baskets are sometimes in the way. Also most people can easily get a hold of a socket set or wrench even if they don't own one. I've seen owners manuals suggesting the use of syringes to get out excess oil using the method you describe but who's gonna do that? All you do is undo the drain bolt for a second and reinstall the drain bolt and check the level and repeat if necessary. I've done it on a mates bike and even used the same crush washer and never leaked. I would suggest wearing some rubber gloves. Just delete the comment. Stop trying to be a smarty pants.
Did you ever put too much oil in your bike?
i just did
Yes
I just got my Kawazaki hone, and the garage filled it up too much!!! 😢 I will definetely try to remove some now - following your great DIY video! Fingers crossed! ❤ Thank you so much for sharing this! 😊 Greetings from Sweden! 🇸🇪
I filled mine up to much and now it needs to be rebuilt, thats why I am here
@@chamilakurera22561:17 ❤Ok I
I don't usually put crap comments, but dear me!
How you dragged this one forever! 3:30 for a 30 second message...
And yet, you stayed. lol
@@briarfox637obviously he had to at least once to find the useful information
@@MC-qj2zd lol guess so. There's so much content out there that is more beneficial, quicker! I just stop the vids if they don't stop rambling within 15 seconds.
The only thing that needed addressing wasn't: the problem of letting out just a small amount of oil while all of the oil is trying to rush our. Thanks for nothing.
Is it ok to be on the upper marker do you do any damage to the engine when it is full pls
This helped so much thanks.
Quick question if you get to this comment.
I have a 2020 636.
When I'm riding, I feel a slight stutter every half a second. It's causing the exhaust sound to move up and down ever so slightly. Like vrooooOOoooOooOooOooOooOoom . But it's ever so slight.
When it's making that wave I can feel that wave on my foot pegs.
I can't figure it out.
Hey @DeadDogs Bark. We're really glad that we could help you with this video.
Regarding the issue that you're having at the moment with your bike, I think it's best to visit a mechanic that can physically inspect the matter and give a comprehensive report. With the Castrol Workshop map available below, you can find the closest certified Castrol Service to you. Through our network of Castrol SERVICE and Castrol AUTO SERVICE workshops, you can be confident that your complete service needs are in the hands of mechanics that are committed to friendly service and quality maintenance.
Link to Workshop Map: on.bp.com/3LYLs1g
Have a nice day.
Team Castrol
Ive overfilled my bike with 100ml I was going crazy 🤪
Thanks for sharing was useful to me
Will my bike loose a bit of power like feel slightly sluggish
I managed to drain the excess oil after realising the bike wasn't flat but with kickstand, but i did run the bike for 5 mins with the excess oil condition. Does it cause major problem to the bike? thanks
I done this too😭 I would also like to know
Propbably not
I did put a bit more than needed. Try to remove it with a syringe and got it stuck in the engine. When I tried to pull the pipe it broke. Was lucky enough to pull it out with a needle nose. Still scared that there are plastic debris inside the engine case.
Hey smart guy. Show us how you fit the drain bolt back in while the oil is still flowing.
Noticed the same. How did stop oil from rushing out 😅
It's easy, you just screw it back in. When you press it up to the hole it will stop the flow. I literally did mine twice yesterday to get the right level
I did mine yesterday, you just screw it back in...... very easy
What type of oil bike can you use in Uganda,in honda steed 400cc?
Hello, Alex. Thanks for contacting us. Have you tried our Product Finder??
You can find it at the link below:
on.bp.com/3MnCgCX
^ Team Castrol
the best oilused in honda steed 400cc in Africa
I have put too much oil in my bike and the engine is getting really hot
I actually did, on my Suzuki so 650 1 gen and now there is some oil in stator, bike won’t start battery goes dead very quick. Any advice from professionals?
Hi, Wojciech Rudek.
For professional advice, we always recommend visiting the closest Castrol workshop. You can find it on the Castrol Partners Map below:
on.bp.com/3ztMtaE
Hope this helps.
If i only overfill by 50ml is it safe?
Why shouldn't it be safe?
Nice one 👍
Thank you!
Thank you
Did this to my grom. Drained the oil. But now my bike want move faster then 10 mph.
Between F and L
?
That’s crazy.
Full is at F. If the engine uses some oil you can be save at “between” F and L.
Just fill it up to F, and a little to much doesn’t hurt your engine. It’s actually realy hard to mess up your engine with to much oil. Couse you need to fill it up all the way. And then you pored Liter to much in it. And that will never happen. As long as there is enough room for the oil to move. Then you never blow up your engine. It’s mostly over reacted. So a little over Full, no problem. Poring another Liter in. Then it’s questionable 🤨.
You are kidding me! If you put too much oil in your engine let a little bit out? If you haven’t worked that one out you should be working on a bike at all
And yet here you are on this video bud.
Sound like you looked this video up 😂
do u mean should not?
The person who fixed my bike put too much oil lmao
Suck out excess oil using 50 ml syringe and pipe ( in place of needle
And today we learn to breath but be sure to wear full PPE
You must be Michael Caine's grandson
I'm sorry I can't recommend this manufactur not for their oil.
Hello, Jamie Powell. We're sorry to hear about this and would like to know more. Are you able to send us a private message on Facebook with all the details? Thanks
^ Team CASTROL
That's a really bad way of doing it👎
Why don’t you tell the world how it should be done then. I will add that this method he suggests is fine. I would personally block the drain plug hole after siphoning some oil off with a conical plug and then refit the sump plug with a new crush washer.
@@keithgray7593 simply warm the engine up to thin the oil then draw from where you fill the oil. I hope the world appreciates👍
@@robertprosser6856 Haha how is this a bad way of doing it? The way you suggest doesn't work for every bike as clutch baskets are sometimes in the way. Also most people can easily get a hold of a socket set or wrench even if they don't own one. I've seen owners manuals suggesting the use of syringes to get out excess oil using the method you describe but who's gonna do that? All you do is undo the drain bolt for a second and reinstall the drain bolt and check the level and repeat if necessary. I've done it on a mates bike and even used the same crush washer and never leaked. I would suggest wearing some rubber gloves. Just delete the comment. Stop trying to be a smarty pants.
@@aidenlothian9642 haha see above.
TOTALLY POINTLESS
Don't it causes heating problem???