GM Death Code Strikes Low Mile 2012 Silverado P0601
HTML-код
- Опубликовано: 15 июл 2022
- This 2012 Silverado runs for a few minutes then dies and will not crank or start. The only code is a P0601.
Send us a postcard:
Watch Wes Work
P.O. Box 106
Fulton, IL 61252
Send us an email:
mail@watchweswork.com 
Авто/Мото
This is why I love my 1979 chevy 400k miles never left me stranded ever.!!!
I have a 91 dodge with the Cummings 5.9 ltr diesel, looked after it, replaced clutch 2 times, has over 750,000 Km’s the chassis has been gone over 4 times but I oiled it every year so it still works. That motor/tranny is the best I have ever seen, can’t say that for the rest of the truck. But we still use it on the farm and t owning wagons etc EDIT, sorry that’s KM’s
I swear wes is one of the only Mechanics on RUclips that works on absolutely everything....tractor trailers and garbage trucks to lawnmowers scan tools and o scopes ... this man knows his stuff and is very talented.
that's normal for rural mechanics, though. Wouldn't surprise me if the local vet also have to help deliver human babies, because that's usually what those kind of communities are like
@@thesteelrodent1796 I live in rural Georgia but I only work on domestic and Asian cars and trucks and don't really want to work on anything else
@@thesteelrodent1796 Thats the main reason they want 15 min cities..keep the majority useless and reliant
Good mechanics specialize in one area. Odd jobber.
Thank God we have people like Wes that understand how to work with this stuff. Give me back my 1972 Plymouth Cuda any day.
The marriage of expertise, truth , and sarcasm on this channel is fantastic :)
It's gotta be 95 minimum to do square bales...Man that brought back some PTSD I didn't realize I had from my childhood.
How about stacking said bales in a hay mow on a 95 degree day? That's fun, too!
can you explain this reference?
@@beiste6708 it seemed like every day that you'd be on the bale wagon stacking the bales, it was the hottest day of the month
Yup, I still have nightmares about being up in the barn rafters stacking bales in heat and dust so thick you could barely breathe.
@@DeweyCheatumNHoweLLC Necessary, not fun.
One of the few times where replacing the ECM/PCM actually resolves "customer complaint". Nice work as usual Wes!
I had to replace my ECM in a 1983 Trans Am. That was from the stone ages though, so I don't think anybody knew what programming was. Except for me; I was writing assembler code back then lol.
Looks like your battery is missing
It will happen again they have defective pins that plunge into the computer
@@jamesmatthews2966, do you mean the pins physically "stab" into the computer innards? (causing electrical shorts, etc.)
@@jeffearnest3269qWTF??????
As a 65 year old guy, I used to work on 50's, 60's and 70's cars and trucks, and I don't envy you guys now. I was an industrial electrician for my career and it's astonishingly similar to what you do, except for all the security and emissions issues you have to take into account. I would write my program as I saw fit and let 'er rip. If it was an existing machine, I could download the programming to my laptop, examine it in every detail, make changes as necessary, and upload it back to the CPU. Newer CPUs allowed you to make edits on the fly. And I never had to worry about bricking the CPU if I made a mistake - just clear it and start over.
I'm not watching to learn how to do these things to my 2011 Silverado, but If I have to take it to my guy, I'll know what he's in for and not begrudge paying him accordingly. I still do all the stuff I can do not related to ECMs, BCMs, and such. Thanks for putting in the extra time and work to document what you do, as I know it's frustrating enough to do the work without worrying about lighting, camera angles, exposure, plus then editing it down to appeal to a wide variety of youtube consumers, from noobs who don't know the difference between a filter and an injector, to professionals who do it 8 hours a day. Oh, and the eye candy at the end was nice too! She seems uncomfortable being on camera, but also, she looks at you like my wife looks at me - the "Why are you recording me, ya dork!" look.
I have a 95 Tahoe videos like this will keep me in the 1900s
Scary
Keep them coming
LoL.... For the majority of my professional Technician career at a GM dealer I was the tech that did almost all pass-thru module programming and I absolutely freaking loved it! I agree with you though, even with the GM SET (Specialized Electrical Training) course, there were times when you'd have to pull out a Ouija board and summon the knowledge of darkness to find the answer you seek to get past a recalibration stumbling block.
I remember pass-thru programming. GM master tech here. It’s come a long way, but problems still occur all the time. I think it has gotten worse. These new GM vehicles are trash.
It's unbelievable the amount of broken wires and module failures I encounter in GM vehicles now. I'm retired from profesional wrenching but i do earn good cash money on the side now, diagnosing and repairing GM electrical and driveability failures. There was a time till the mid 2000's where GM wiring was just about bulletproof and the modules would sometimes become logic locked where a good swift battery disconnect would bring things back up and running. I drive VW's and Fords now and with very good reason. The failure rates of GM engines now too shocks me! GM has fallen to 1985/86 quality and reliabilty levels and thats pretty darn low!
@@gmctech GM is my favorite stuff to work on. But, its junk. Only reason I buy the stuff is because I buy it broken for pennies on the dollar, throw some parts at them and keep them going. If I paid retail money for a car, it surely would not be a GM. Ford is just as bad.
GMTech. I work as an electrician at the FWA (Fort Wayne Assembly) Silverado truck plant. This T1xx build was a disaster and still is, on launch these trucks lost brakes, my cousin is an engine engineer for GM, he got one of the launch trucks, guess what happened on a Saturday morning? Yes, he lost all the brakes on this truck, he got every engineer boss out of bed that morning. Guess what, the brake problem was resolved that week. Moving forward these trucks are a disaster, the fuel management system is killing these trucks.
IBM MVS JCL for a 3033 was more understandable than GM SET for a pick up
I love how the module has ears and holes to be bolted up, but still lives in a plastic clip that'll eventually dry out and break. xD
I want to thank you for making these videos. I've been laid up for the last five weeks from a badly broken ankle and have been stir crazy. Your videos have helped me get my fix on automotive work so I don't go completely insane. I know I'll be back in the shop before I know it, but it's really nice to basically live vicariously through you at the moment.
i too was caught whistling in the dark, from a bad atv accident. i bout had my arm ripped off at the shoulder, and went crazyyyy asf. prayers you get healed up bro
love watching your videos! Thank you for taking the time to make them for us!
Love to see y'all supporting eachother! I see channels wearing merch from other channels and it makes me feel good knowing this is a good community of folks all just doing what ever it takes. Hats off to ya!
😎
I didn't pay attention.....
Who's was he wearing?
@@dans_Learning_Curve Mrs Wes has a Diesel Creek emblazoned shirt.
@@dans_Learning_Curve mrs w had diesel creek on! Love matt hes da man!
She was wearing diesel creek.... Didn't have the new logo so maybe the met one time?and it from then
You hit the nail on the head. "Beaurocracy" and "pain in the ass"!!! They go well together!!!
Just like "Dishonest" and "Politicians"
I enjoy watching you work. Thank you for taking the time to film, edit, and post!
Wes, you are helping me a lot with my own small equipment repairs, and your humor hits me just right. Thank you!
Oh darn.... The perfect opportunity to mimic the Vehcor Scream!
The Highlight of my morning, appreciate you having us along
You are an all-time classic keep up the great work
Love that the people selling programming for our cars can't make a program for windows that doesn't crash yet. So confidence-inspiring!
Wes you deserve a fuckin medal bro I don’t understand how you can remember all that information in your brain your a genius and will follow your channel all the way mate I love it
Enjoyed watching this video. I don’t know anything about the computer modules on newer vehicles. I’m 75 and I like the days when a car stopped running, and it wasn’t locked up you either had a fuel problem or spark problem.
I agree completely. I grew up with points, condenser, carb and a coil. I've learned a LOT from watching videos like this. I have a cheap code reader that I am learning and need to get real time readings now. It is fascinating how far auto technology has come.
Yes bring hammer
Yes sir I'm 51 and grew up same way. Rebuilding a 88 jeep but now it has simple hei distributor and a regular carburetor and regular manual pump .👍
@@larryalexander4833 I can remember when the HEI first came out. It was some kind of magic with no points. Looks primitive by todays standards
But thirty years ago we were all using bag phones and pagers. Crazy how the world has evolved.
@@unti419 yes sir and in my opinion not for the good .
This was truly educational, I have never seen this done before. Thanks for posting this video and your resolution.
You make everything look easy Wes! I really do enjoy watching and learning from you!
She's "back in the will" and you're back in her "good graces".
I would consider that a win-win.
Bloody love these videos. For the humour, the lifestyle, the problem solving!
You need an SMA brake clean soundeffect for something! Highly addictive.
I like the unboxing of the parts. that's the most addictive soothing portion.
Nooooo!
Rainman Ray wore that sound effect out and killed it in one vid..lol
Not SMA, rather Rainman Ray.
Liked the small shout out to "Diesel Creek" per your lovely wife, whose name escapes me. Excellent work again Wes, your troubleshooting skills and patience are admirable to say the least
Wow! You've taken me into a whole new world. Not sure I want to go there but I believe you did quite well. Thanks for sharing!
I like how the old Ford is towing the new GM.
The forward march of progress will trample us all into the dirt of planned obsolescence
All you need now is a old Chevrolet towing the 90s ford 😏😏.
@@brandonbell3089 what 90's Fords? i've have never seen that,best trucks on the planet are Fords i'm a dumb dumb who purchased a chevy colorado that has issues with only 3400 miles,the worst used used truck i ever owned was a dakota,i've own used Fords that never left me stranded.
@@stangman1268 fords are the most recalled trucks on the planet 😂😂. I actually have a 93 f150 300I6 5 speed/ 97 F250 351 E4OD setting in the yard both broken. Aswell as a 86 f150 and a 72 F350 360FE
@@stangman1268 hell look up the recalls on the 2022 ford VS Chevrolet and get back at me 😂😂
Nice of GM to make the PCM bracket with a quick release. It's like they knew it was going to fail.
Right!
Believe or not: gm is getting hmmm smarter but not the way its going to help their customers, even if their trucks could pass a crash test
I'm sure they only care about quick assembly times at the factory. It's an unintentional bonus for the next guy that touches that part.
Wes, your channel is the best. I tune in for the repairs, for the sometimes arduous diagnoses, and thorough step-by-step processes, and the variety. Equal to all that is the great humor, nearly always deadpan but always makes me laugh.
"Let's see if we can get you written out of the will." 😂 Great sport she is.
And Max the Great Hunter and wind connoisseur is a plus.
Keep em coming.
All the best to you and yours...from us in North Carolina.
Your sense of humor had me rolling......done lots of work on cars back in the 80s......good thing there are guys like you around. I am a software architect and I wouldn't even begin to touch something like this (before the video of course).
"It's almost like I work on cars every day"
I appreciate your work Wes. I just replaced the gearbox on my "modern" 2007 Opel Vivaro van. What a *#@$ job that was ! But it's in and it works !
You're a funny guy too ! I like your humour !
Typical Joe Biden loving gun banning clown eh?
LoL in Toyota Tacoma..."I think you are doing something wrong...?"
Those old ford's are really the only old truck you see actually working anymore. People all around me still have f350 dump trucks and stuff.
I have been running my ‘97 powerstroke daily for twenty years now. Coming up on 400k and I trust it more than any newer vehicle. It always gives me lots of warning when something is wrong and always makes it home. I have literally never had to tow it.
I fix a lot of stuff but this repair was so far over my head I could barely see my computer screen! You’ve got mad skills!
excellent video as usual....your breadth of knowledge amazes me...your ME profs would be proud.
Great vid as usual Wes. You make us smarter every time you put out a video. That for sharing.
I have seen some of the looks that Mrs. Wes has thrown your way and it is wise to stay out of the way when the towing service is in operation.😁
Awesome job, as usual. Keep at it.
We agree!
Towing service operators are unsung heroes. They'll come out to get you and save you from yourself and the rattlesnakes all around you no matter the weather or FQ you employed to get your fool self stranded wherever you are. 😁
(FQ = Foolishness Quotient - covers things like "forgot to torque that last bolt" and "It's okay, I can test this without shielding", as well as my personal favorite, "Baaah, that's not a raincloud!"
I admire anyone who messes with auto electrickery, and you do it with such patience.
My hat's off to you techs who do this work. It's beyond belief as to what you have to go through to come up with a fix. Beyond belief. And your test equipment must cost a fortune. I enjoyed your video, thanks.
Interesting analysis and repair. Good job Wes
Wes, I had to laugh, I was bailing small squares 7/14 and was still picking up and moving bales until 10PM to stay ahead of rain.
Thanks for the video, always enjoy watching!
I come for the mechanical expertise but stay for the sense of humour. Keep up the great work Wes👌
Holy balls, I like being a DIY, but the newer computer ran stuff is so expensive to work on. I appreciate your headache Wes, keep up the great work and letting us follow along
Not really massively expensive? A decent Chinese scan tool is 500? Covers most motors. Most dealers will also give you access to info for a one off charge with a time limit.
J2534 box starts at about $1500. Need a laptop to run it that has windows 10. That’s to program modules. I don’t bother with a charger, just hook up my jump box or a secondary battery and it works. I suck at IT stuff and still am able to do it fairly easily. For some reason I feel smart with every successful programming
Depends on the manufacturer, really.
You can get a knockoff Chinese J2534 cable for under a hundred bucks. Would I trust it with a customer's car? Hell no. Do I trust mine with my cars? Yep! Worst case I tow it to the dealership and feign ignorance at why that module is stone cold dead.
As you saw, GM is 40 bucks per VIN per year. Subaru is a couple thousand bucks per year unlimited (and only works 2016-and-up because their older software only supports their specific scan tool, not generic J2534, and their specific tool is discontinued and the official reseller is all 'good luck!'). Everyone else is somewhere on that spectrum.
You only need any of that if you're swapping modules around. A nice prosumer scan tool is sufficient for most service tasks.
Very clever having Mrs Wes driving her daddies truck 🚚 of the trailer.
Great diagnosis and repair.
Thanks for sharing.
Best Comment Award !!! "Daughters" never get in trouble with Dad in these instances ... very shrewd Wes !!!
Hi Wes excellent video love how you explain what you’re fixing learning a lot and always you and your families be safe 🇺🇸🇺🇸🇺🇸
Wes,
This brings back bad memories when I was a tech for a major auto manufacture in R & D. I worked directly with BCM, ECM's in prototype vehicles. Even though working for the company it was like pulling teeth trying to get the info on programming due to the anti theft systems. You and I could share some fun stories over cold beverages.
Enjoy your content and quality. Boe
Congratulations on reentry to the Will. Great study in what has to be left to the expert with the proper tools !Good video Wes.
Wes, you put out the best content and do such an amazing job of working through the steps of how you arrived at the solutions. Thank you for sharing you issues, frustrations and successes with the machines of the of the world.
OMG WOW, etc. etc. I've watched many vids on cars with problems, BUT having watched yours, I must say this has to be the best all-around presentation from start to finish! I'm 80 years young, and back in the mid 60's I had a garage when things were relatively simple ... yeah less complicated but frequent service demands. The only piece of equipment I had was a tach/dwell meter LOL.
I'd have to remortgage my home to get back into the business. Thanks again and best wishes to you and your VERY pretty wife ... Don, Saugus MA (just North of Boston)
Nice job diagnosing the trouble. Love the content and keep the videos coming!
Your father-in-law will love you, You got his truck fixed within a reasonable time congratulations
Pressure is real when reprogramming modules, had a DRG 450 once that had a module failure during an update, had about 20 fault codes after that lol, also noticing more and more improvements to your filming and editing, keep it up guys you bring so much entertainment to us nerds.
Laughs in Tacoma..."Reprogramming"...? WTH is that? It that when I shift my 2000 Tacoma from 4 wheel back into 2 wheel drive, after pulling one of these out of the mud or something...? I'm confused??? Or is "reprogramming" the other word for soldering, when I pull out my dash, and have to resolder all of my connections after shaking them all loose from 20 YEARS of beating the absolute HELL out of it...? American made trucks are SO CONFUSING to me, because something is always BROKEN!!!
@@brentfarvors192 It honestly depends on how well the manufacturer has integrated the elecrronics into the vehicle, it is usually very rare to have to replace ECUs if the manufacturer has put some thought into protecting its circuits, in the example i named on the DRG450 reachstacker we simply had some bad luck with the ECU dying prematurely since we have about 20 other vehicles on site using the same ECUs and most have clocked 10000hrs and some over 20000hrs without issue.
@@HStahlberg Just stating that Toyota has never seemed to have these problems...Hmm...?
@@brentfarvors192 Toyota is not immune to making poor design choices, Wes has an older video about tearing down the engine on a Rav 4 because of excessive oil consumption due to a bad piston ring design. Honestly it's kind of a wash when it comes to the reliability of newer vehicles, different brands but like 80% of the components in all of them come from the same factories.
@@HStahlberg That's why I only buy cars that were made IN Japan...
I enjoy watching Wes Work. Very common sense/practical.
Wes, not much of a posting tuber but I will post a video. You will appreciate, mentioned etc. I will fire up a Terex 8230b sitting for 15+ years. Won't look good as your work.
Great Video. I never knew that you could program a GM control module without being a OEM shop. I’m sure the programming box is not cheap but nice to know. Very informative as always. Thanks
This video was great. Funny and I love even the scope gets busted out Thank you!👍
I always love a Wes video on break!!!!
Enjoy your Break
You went about diagnosing the problem correctly. Always verify power and ground before replacing components. Great to see another diagnostic tech out there.
Cute couple. Massive talent. Thanks for the show!
thanks for early upload of video and to witness the promotion of staff, from brake bleeder to vehicle off loader technician. Standby towing operative already included. really nice to watch you both coming together to fix in-law truck at competitive rates.
😎
Gotta love it, thanks for the ride along, glad to hear the tow service is back in the will!😉😆
Quick, tight diagnosis and 1st time resolution. You'd think you've done this before! 😎
Thanks - this was fun.
Same year as mine, so far shes been golden. Interesting video.
Wow, thanks Wes. Very interesting video and learned I never want to go there with the PCM.
Always enjoy your repairs, thanks for sharing them with us.
Hi Wes and Mrs Wes Towing Service, many thanks for a very informative and amusing video. From Nr Liverpool UK
Hi! 😎🦡
Wes you have the best automotive channel on you tube. Thank you
That was very cool. I upgraded or rewrote a multitude of ROMs in my IT career, but never one for a vehicle. Love the suspense and drama!
Seems like you have a pretty good flasher unit. I work on material handling machines (forklifts, pallet jacks ect) and I was once cursed with having to re flash over 35 electric forklifts on 2 modules per truck and some had 3. Took total of at least 45 minute per truck. This was done in the field and you never know what the working environment was going to be. Would have been simple if you just connected and hit go but NOOOOOOO. Had to go in and tell which module what nodule to re flash and then chose which software to install. And like you said, mess up and you got an expensive brick. At over 3 grand a module, you will read the sent instruction at least a dozen times per unit, do a couple dry runs and then sweat bullets hoping you do not lose power from laptop or vehicle power. Spent 2 weeks doing this and had a lot less hair when finished and what was left became a nice color gray. Still have to do this from time to time with other lift producers and have yet to trash one. TY for sharing this video and look forward to futures vids also.
I feel your pain!
@@WatchWesWork Who was the victim you did the root canal on??
So even electric forklifts and pallet jacks are computer controlled now? I understand the benefits of computer controlling a gasoline engine for emissions and fuel economy, but I'm a bit mystified as to what benefit (other than as a cash cow for parts and repair departments) there would be for an electric forklift. The damn things used to work very well on just a few switches and contacters.
@@russlehman2070 Most modern electric jacks and lifts are ridiculous. These thing have ramp up control, lift speed control, regen braking, Darwin proofed, and run 3 phase motors. A real pan in the arse to diagnose at times. Welcome to the world of micro management!
Good job! The more I see of newer vehicles the less I like it. I have an older vehicle and that is bad enough. Clearly the average DIY mechanic wouldn't be able to deal with this stuff. I certainly wouldn't want to. Glad there are people like you who can do it.
Yes, with modern vehicles, there are some things I can do myself (brakes, for example), but when the computer controlled stuff starts glitching, I'm at a loss to do more than clear a code and hope it doesn't come back (which usually doesn't work). The '60's and '70's vehicles I drove for a long time, I understood very well.
Somehow I find it a challenge. I'm retired and don't have a lot to do except fish and mow grass. I love learning these new systems. I have a great shop to do it. But I need some expensive diagnostic tools to keep learning more.
Im an old school carb guy and am intimated by anything with a computer (beyond checking my email and surfing the web). I finally broke down and got an LS for my 55’ Chevy truck build… Its way more simple and straightforward than I thought. I kind of built it up in my head that it was going to be a terrifying, hair-pulling-out ordeal.
Anything newer than 2003 is probably not going to be fun to maintain
I miss the auto shop days but when scanners & electronics took over I got left behind to hard for me learn multimeters amps ohmns PCM signals I just don't have that mind set. Love the vids Wes 👊
Your sense of humor makes my day. My local "in house white knuckle towing service" will agree with yours.
I’ve seen this exact issues when a gmc was struck by lightning. I also seen this issue when I told the person to stop driving their truck when the alternator was fried and they didn’t listen. If it comes back and the transmission doesn’t shift it’s the alternator output is to high.
My 2012 Duramax started cutting out randomly and momentarily during highway cruise. I can’t remember the code but it was something similar like maybe “ECM lost communication”. The dealer didn’t know what it meant either. I decided to do the easy things first. I removed the fuse box circuit board, looked for corrosion, cleaned it and plugged it back in. I checked all the ground wires for contact the main ground was a bit loose. It wasn’t where I could see it, so i don’t know if it was rusty. I loosened it, wiggled it and retightened it. THen I disconnected the ECM and TCM and looked for corrosion, cleaned both and reconnected them. I haven’t seen the problem since.
My 2019 Yukon would lose all sorts of electronics only at startup. Engine would start but no transmission engagement, no auto lamps, no climate control, amongst other things. I have a video on my channel showing the symptoms, as I took a video the first time I experienced the problem in January 2020 about a month after I purchased the vehicle used. The local GM dealer found nothing wrong. Then it happened again about a month later in February 2020. Then the dealer kept it for about 2-3 weeks. It wasn't a frequent problem so it was hard for them to diagnose as they never had the ability to replicate the issue in their shop.
They found a stored code for loss of communication with the ECU, so they replaced it, but also found the main ground to the frame behind the passenger front wheel to be caked with undercoating/wax. I can't say for sure which corrected the problem but in 2.5 years haven't experienced the issue again, I'm probably leaning towards the engine computer rather than the ground as I thought I would have experienced other oddities if there was an actual grounding issue.
I had it well documented with General Motors "escalated customer service" or whatever they're called. The techs at the dealership had to call into GM's escalated technical support because they too were stumped.
I posted about it on various forums and had a couple people mentioning that their 2019 Tahoes, Suburbans, and Yukons exhibited a similar symptoms so apparently I wasn't the only one.
Why are crappy electrics still a thing...
I always tell my customers, simple and stupid first, then dig deeper. I would say ~75% of electrical problems stem from either corrosion or a bad/loose/missed connection. 6ou did well. Was that loose ground hidden behind the block?
@@alouisschafer7212 Keeps me in Dr Pepper and carne asada 😆
I guess sometimes, what is wrong is exactly what's written in the error code
Another excellent video! Nice work Wes!
That is a beautiful truck. Exactly how they should be taken care of.
Thanks for the good videos Wes, after watching you do this stuff I’ve been sorting my own car recently!
I did my first oil change and filter change, and belt change all in one day. Wouldn’t be possible without your videos of you swearing at bolts and seized breaks.
My next task is to replace the leaking AC evaporator… many hours of work to remove the dash for a single component
The engineers need to have their asses in the shop,tearing these vehicles apart,to replace an evaporator..retarded what has to be done,when something like that could be plumbed to be accessable
@@listenupfools731 yeah it is really dumb it should just be a slot at the back of the dash which pops out and you can just unbolt from firewall side it makes too much sense
22:00 This is 100% true, my dad and grandpa would ALWAYS wait till it was 95-100F with 75-80 dew points then spend all afternoon with the truck in the granny gear throwing square hay bales up on the trailer on a Saturday but your friends are out at the pool having fun :/
Good video on test drive and no tow service available at home. But you gotta live those days. Wes aways good to see what your fun day going to be. Thanks for sharing and you and Ms Wes have a great day👍🏻👋
Love to see a Diesel Creek shirt on the White Knuckle Towing Service rep! Thanks for taking the time to share!!
Wow so much computer knowledge to fix it. Beautiful truck not a rusty bucket truck. And vehicles today have so much extra computer crap that it will be hard for a weekend warrior to fix nothing easy no more. Great video Wes👍
I drove a 3 on the tree 64 ford falcon for years. Had the electric rear window which was the fancy option😊 My oh my technology was sold as making life easier😂 Really enjoy your video's😊
Wes, as always, LOVE the videos!
Sounds like nothing is wrong it's all part of that genuine gm feeling
Considering I have a similar truck, thanks for making me want to spend another $2000 in tools so I can fix it myself instead of $100 to have a dealer program a module the next time one fails. Good content, love seeing you take the mystery out of fixing modern stuff.
$100 to program a module ?? you must be stuck in 1980 mode
buy a vx diag gm nano, about $125 can connect to gm with a $50 vin buy gm. have 2 years to use it. works like oem gm scan tool (tech 2).
What a compelling lesson to avoid this technology.
Takes a lot more than just wrench turning these days, man you got to be a techy on top it! Good one Wes!
Excellent content much appreciated
My future father in law towed my ‘99 Ford super duty 7.3 (clutch let go) with his Chevy Duramax one time many years ago. He has never let me forget about that. BTW I’m still driving my Ford, FIL is on his third Chevy. Just saying
Mrs. Wes in a Diesel Creek shirt. Now we need to see Eva in a Watch Wes Work shirt. Spread the love 😁
I think she has one…I’ll ask…
@@mrswes Great stuff. Thanks for the quick reply Mrs. W. Take care. Norm, UK
I know it was you listening to talk to you about fixing it. The man , myth and legend
You just cured me from ever buying a new vehicle again.......
Why? they all break down, this guy huffing and whining about every little thing. Oh this is gonna be root canal, took like five minutes to update firmware. These Silverado's are running 300,000 miles on the OEM powertrain. That old Ford would be lucky to make it 100k without an engine swap. Been there.
Impossible for us mere mortals to repair...:-) Great video... 🙂
Remember when a car did that it was either a dead battery, a bad starter, or a bad ignition switch?
with those things if it was running it didn't die on the road.
Man that “tow” truck makes me miss my ‘89. Towed and hauled a lot of stuff with that truck for 23 years until the body finally gave in to the New England weather
Ur patience levels are unreal exelelent job as usual
I had a ram 1500 that was doing that and throwing similar code2 shops tried and couldn’t figure it out. Turns out the alternator was shorting out when it got wet. It ran fine and then one day started raining and started acting up. Stared testing and figured it out. This is another prime example why we need to start going away from computer cars and back to analog vehicles
That will never happen. Computers in cars have allowed emissions to go as low as they have. Emissions have gone down, while performance has gone up, especially on smaller engines. They hit limits with carburetor engines long ago. You could never hit modern tight tolerances with old systems. The future of electric vehicles need to be computerized, no ifs or buts about it. Computers are part of our life now. I love tech and am amazed at how the boundaries keep getting pushed.
Getting into IT and electronics was the best thing I ever did, because life depends on them now.
Great video as always, never sure about repairing family vehicles, it can lead to awkward moments :-) Hell Wes you got her fixed good!
"That great GM feeling"
Loved the video, informative, educational, and even amusing at times. Great work.