Customer Finally Says "Uncle" - GMC Duramax is Totally Dead
HTML-код
- Опубликовано: 21 июл 2024
- I don't know what happened to this truck, but it won't do anything. 2004 GMC Sierra 2500 Duramax, no crank, no start, no communication.
Merch: watchweswork.com
Send us a postcard:
Watch Wes Work
P.O. Box 106
Fulton, IL 61252
Send us an email:
mail@watchweswork.com 
Авто/Мото
Need a new toy?
LIttelfuse Redbox Fuse Kit: amzn.to/3lfYrOK
Fuse Current Loops: amzn.to/3nVeRxT
Hey Wes! Just wondering why you don't have a Patreon account? Sure I'm not the only one to get at least a couple bucks worth of entertainment each month from the time you very generously share with us, and would be glad to show my appreciation.
That current loop kit is genius.... Why didn't I think of that?
oooh are those affiliate links? I've already bought a bunch of stuff because of you; might as well profit from it!
I'd like to know what those green flashlights are....
@@MrAmorti he has talked about that in previous videos, I think a Q&A he did with his wife in the last year or so.
I know farm trucks take a beating...but this takes the cake for a piece of crap on wheels. I admire your courage at even wanting to take a look at it. Plus you got it running. Well done sir.
Yeah, i though my brother's Toyota was bad. It hasn't been legal for almost 10 years now, it's beat to shit, not... so much rusty, but really broken. But this is somehow worse... :))
you have to take the customers you get.
@@lostintime8651 Sad, but true, in his situation. Word of mouth can be nasty.
Worked on quite a few oil field rigs that this doesnt even compare to.. but as far as compared to your average vehicle, yeah, she's pooched
It's not *that* bad - besides, he fixes stuff for a living - you expect him to get brand new shiny stuff in the door heheh - in the rust belt no less.
The treachery some people can inflict on a vehicle is truly amazing, and then they open the hood.......
I was going to say .. I have an 06 with the 6.0, club cab LT. I got it really, really cheap. This thing has spent some portion of its life off the ground. I've got it pretty well fixed up, with an engine ready for a rebuild. Sad to see stuff abused and neglected so badly. That seat is comically bad. Mine had a tear, which I had redone, but nothing like that!
That new automatic u-joint lubrication system is right impressive. Interesting aftermarket accessory.
The oil pressure sensor on my Silverado cracked. I didn't realize it until I was driving at 70+mph and noticed a gray haze behind me! (Oil dripping onto exhaust pipe.)
Let's just say everything from the bell housing to the rear bumper is now VERY well lubricated.
@@Cautionary_Tale_Harris that’s rust preventative if you live where they throw steel dissolver on the roads because people can’t drive in snow
Looks much better than the UJ washing system my disco comes factory with (AC drain goes straight onto the front prop shaft double cardan joint)
Funny story. I had one of those one time and it would shut off randomly going down the road. It was blowing fuse every time on a essential circuit. We worked on it until after dark and ironically the darkness helped us find the problem! A wire in the main wire loom was shorting out and the only way we found the short was by seeing the tiny spark in the darkness.
I've seen mice get under the fuse box and chew on wires cause majer corrosion problems from pee and poop just saying, have a good one
You laughing when it started was the best!!
Sounded like Mustie1
@@JimsNBHomestead yep!
Or Matt at Diesel Creek!
Have you ever seen when someone hooks up the wrong polarity on completely dead batteries when attempting to jumpstart? Blows just about all the ecm fuses instantly. Seeing it has new batteries that could be the culprit.
Seen this a few times… on some of the later model Japanese vehicles it really messes them up….how people accomplish this always a great question
I did that. In my case it was because I had to join two sets of cables to reach and just wasn't paying good attention. Got away with just a blown fusible link and accessory fuse on my 01 Saturn and nothing wrong on the 89 Cadillac jumping me.
I've seen people switch the cables if it doesn't start the first time though.
If ecm made acording to standarts norting happens.
Zactly
And that's why I NEVER jumpstart anyone's car with my car.
I have just come to the conclusion that when you don’t have your lovely assistant present you need a remote controlled winch at the back of the shop to pull these vehicles in
Thats a Great Idea Wes Should see this
@Jambo I was thinking snatch blocks too, I agree an A frame would probably be a lot simpler.
Sure- a couple D loops mounted to the floor either side of the doorway and the snatch blocks would work well.
Snatch Blocks? Remote controlled Wench...Ahem, Winch? Lovely Assistant cannot be replaced by these devices. She is a classy driver. (Math Class).
@Jambo That's the idea. The winch location would be front and center of the lift.
We - yes sir I have your truck fixed, the tow truck just dropped it off 10 minutes ago, "yeah it was a fuse" .
"Keith DeFazio parking lot diagnostics"... Guaranteed success! 😎👌
He makes it look so easy!
I miss Keith! Good diagnostician. We learned so much from him.
aaa@@unclemarksdiyauto
That laugh when it starts. Pure happiness and i feel it in my heart.
MCI
Amen!
What's in my console?.... Fuses! lol
Wierd they had the same brand as he’s promoting
I was waiting for "IT'S ALIVE"!!! after the miniacle laugh...
Dang, when did a 2004 become an 'older' GM?!....I done got old!
I had to ask when a 1950 and 1960 became "older". It happens.
By the way his workmanship on the truck looked and care the truck is in I can only imagine the looks of the trailer and the wiring of it. They were probably troubleshooting truck wiring and should have been looking at the trailer. Who ever owns the truck can probably tear up a anvil in a cotton field.
"Tear up an anvil in a cotton field." I used to know someone like that. 🤣🤣🤣
@@bluegrallis I had a neighbor like that, he was funny to watch, get so mad at a tractor and plow, he’d be in tears
In his defense, trailer wiring is generally pretty terrible right out of the factory!
This. Trailer wiring is some of the sketchiest hacked up wiring we see in the automotive field. Like every type of connector/ splice you SHOULDN'T DO. Wire nuts even. They have no business in any automotive application, period. Scotch taps, bare twisted connections, etc. The type of stuff that'll make any sane person lose their mind just looking at...
I need to rewire my trailer since my brakes havent worked in over a year
Two in consecutive days you are spoiling us
This is the true meaning of farm truck. Just keep driving until the wheels fall off. Thanks Wes for sharing. Have a great day!
I'm from California. It's not a farm truck unless it has a cow decal on the side.
Ball joints are getting close to releasing a wheel! LoL 🤣😆
@@dans_Learning_Curve And the ABS wire trapped between them brake line clip and the rim doesn't mean any good, too...
:-D
Most farmers take care of their equipment. This owner looks to have been a serial abuser.
@@markwheeler202 A lot of farmers I have known over the years kept an old, beat up truck for use in the fields. Between ruts in the ground, God knows what else under hay or whatever and general abuse caused by farm work they don't want to beat up their $60K new truck for those jobs so they keep an old, beat up truck for that use. Many also go out in the back 160 and cut wood to heat their houses in the winter and use their old, beat up truck for that (I myself have banged up a couple of trucks over the years hauling firewood out of the woods, so has my father -- I know I am glad that part of my life is over now that I live near town and have natural gas service to my house).
This is my story…started with a wire…ended with an expensive experience. Lol
Not that rusty on the bottom.
Always love the blown fuse. Working for a landscape company a machine died, told the crew leader to change a the fuel pump fuse , told me it was OK. Drive out to take a look, swap fuse machine starts right up, lost an hour driving back and forth.
@Jambo I think you commented on the wrong comment...lol
I'm glad you k ow how to do electrical, Wes. Stuff like this makes me want to curl up in the corner in the fetal position sucking my thumb rocking back and forth crying....great vid!
Do you need a pillow and blankie ?
@@stevewhyte8476 and my binkie!
@@jogden6632 HA ! HA !
My theory is he was pulling and swapping fuses and accidentally stuck a blown one back in that hole.
That is one primo truck, you get all the jewels
This reminds me of my dad. He bought a truck but never checked if the air conditioning worked. Then when it got hot he was complaining about it not working . I went over opened the fuse box and sure enough the previous owner had taken the fuse for the compressed out. It was just laying there. Never could figure out why it was removed in the first place.. It still works great 9 years later.
Maybe they didn’t want it to run when they had the car on defrost only thing I could think of, my jeep runs a/c with the face and feet vents on wish it wouldn’t
Lot of people in the comments never patched an old vehicle together. 😂 You got it running Wes. You did good.
2004 is older? Most shops are still teaching on 90's cars lol
As soon as you opened the door I immediately notice we're in the presence of a very fine car connoisseur! I take a guess the blown fuse comes from the fine interior job. I'd be careful putting all these fuses back in...
No way that rig would spend a night in my shop powered up.
Wes pumping out content like no other at the moment. I like it!
Probably a mechanic's worst nightmare is to work behind somebody who "knew a little", then; went ahead and tried to affect a "repair".
effect ?
@@12345NoNamesLeft Affect is a verb, effect a noun.
I am not even a professional mechanic and I agree with that statement wholeheartedly! I probably know more than many of the shade tree "mechanics" around today but I don't know jack shit about vehicles compared to Wes!
Dropping you light followed by "really" at 12:19 made this video for me. Story of my life right there.
Sitting here this morning watching SMA and I am thinking "boy, he sure does get the biggest piles of junk", then WWW shows up and says "hold my beer!!".
Laughed like crazy after he threw the new fuse in it and it started right up.
Awfully brave putting all those other fuses back in. I half expected smoke to just start rolling out of the entire harness.
If it comes back, try removing the fuse box. GM seems to have manufactured the perfect mouse house. I bet I've fixed 25 of them.
No mouse damage. I checked.
Gotta love mechanic RUclips channels.
SMA: “visual inspection, don’t wiggle or touch anything because it might fix it self up”
WWW: “Visual inspection and wiggle stuff around, see if it blows the fuse”
lol thanks for your videos Wes.
Also thanks to Eric.
Good video.
Many people in the US have been priced out of the used and new pick-up truck market, and that's part of the reason we see so many trucks getting repaired that are in pretty bad condition. I have customers still making payments on trucks that aren't much better than this one.
Actually this 2004 truck isn't all that bad compared to some others.
If people refuse to educate themselves (I.e. stop buying twinkies and McMansions), they will have to learn the hard way. Very dark future on the horizon, I give it 3 years tops before the collapse.
Maybe , tyranny appears to be punishment and attempt at correction for abusing liberties . The great reset that Jefferson describes in the Declaration of Independence appears to be the answer to tyranny . Unfortunately tyrants only get worse one coil at a time . Evilution ?
It's by design
I have no idea why I enjoy Wes's videos so much. Sat here in the UK, with almost no personal automotive/mechanic knowledge watching someone work upon vehicles that are largely alien to me.
It's great stuff though. Maybe the insane laughter when the fuse kicked in... Stuff like that.
Keep working, Wes. You sometimes seem puzzled as to how your content is so popular, but it is, even though some of your visitors are as puzzled as you.
Ditto. I’m familiar with a screwdriver and that’s about it. But it frankly gives me the courage to change my air filter, oil, fuses…terribly minor stuff. Watching also makes me want tools I’ll probably never use. I buy his shirts because I want to support people like Wes.
Echo that comment. He works on zero cars I have interest in. But I like Wes and the fact that he never cuts corners, has a calming voice and a good laugh!
Maybe you should try Mr. Carlson's Lab? I enjoy that and I know zilch about old radios and stuff like that.
That laugh at 6:00 sums up the easiness/silliness/relief of the situation when all it was is a simple fuse. Well done sir.
The interiors of those chevys back then always fell apart. They were nice when new.
The only guy who knows as much about wiring diagrams and electrical circuits is Mr O at South Main. You guys are freaking masters of figuring out electrical stuff that makes my eyes glaze over and gives me a headache. Great work Wes. Best Regards
I’d say Pine Hollow Auto Diag is in the running for sure
@@gtemnykh Ivan is a little too quick to jump to conclusions sometimes. Eric O is the cat's meow.
@@thebigmacd PHAD tackles trickier diagnostics work on average (IMO). Eric, perhaps smartly, knows to avoid the Euro sleds.
@@gtemnykh
Thank you. I’ll check his tube out.
Been there too many times where the customer has removed or put a blown fuse in a crucial spot. Thanks Wes!!
Hey Wes...that is a duramax...does not have a fuel pump it is a cp3 drawing vacuum. Also the module you were talking about on the fan shroud is the Transmission Control Module.
Yes, but the ECM is right below it.
Once he finds out it was just a fuse, he's going to sell everything and become Amish.
Loving this channel more and more. Just a thorough, skilled mechanic and the random jobs that pass through his garage. No BS, no pretensions and plenty of lols. Excellent content all round.
That's one rough Sierra.
Wes has the patience of a saint.
little unsolicited advice "pro" tip start putting fender covers on all three sides of the vehicle to protect the paint and yeah i know it's not a gem but it will keep your tools from falling into the abyss all three sides and some times the cowl for nuts bolts parts every time because you know how that works if you just do the area where your working it always happens you find your self working where you thought you never would be it's just what i do i use old long towels that are out of circulation in my house and use them for the vehicles washing drying spill something inside fender cover etc...
It reminds me when I was a young boy, I would take things apart to see what makes it tick. Wouldn't necessarily go back the same way, but it cured my curiosity. When the truck did fire up, smooth as silk. I feel sorry for the truck.
I remember doing the same. Taking things apart to see what makes it tick. As you say, many times, they never got back together. Now a days, it has to go back together. I still love to understand how stuff works.
@Paul Fellows Nowadays they call that child abuse! I am not going to be the one to say never spank your kid (although it is a felony in my state) but if it hurts the kid to sit down afterwards the parent needs to go to jail!
I will definitely have time to finish my coffee watching this one. Thanks Wes.
happy thanks giving from UK, thanks for the 3 videos really nice to have a good block of videos. thanks
The seat switch hanging out can cause some interesting head scratching. We have an 07 Chevy that from time to time would have a dead battery. Turns out the seat switch would get activated when the door was shut.
I love the master fuse kit. I will put this on my wish list. Wes I can’t tell you enough how grateful I am for sharing the good stuff with us.
You should be honored that you were chosen for the drop off by tow truck driver/owner
The " Carbon Monoxide " joke had my sides hurting 🤣🤣🤣
Thanks for sharing 👍 Love the content as always 👍👏
Take care and God Bless 🙏
Your videos are the first i search for when I get in you tube. Keep up the great work. Just know that sometimes your videos are an encouragement to others and a light when some have had a hard day.
Seen it many times, you are spot on. probably something in the trailer wiring, then they went to their local big box auto parts store, for a "free check engine light" diagnosis, or something like that. Wound up buying half the store off the counterperson's "expert opinions", and popped half a dozen fuses trying to put it all in the truck.
Wes, got to admire a guy that has that can do never give up attitude. Some things leave you stumped but non the less come out running at your hands. Love the fact that you tackle and fix almost anything thrown at you. Keep up the good work.
Another winner! Always interesting seeing the problems simple or complicated being solved.
When you got the truck to start you did an awesome Bond Villian laugh! Even puts Mustie1's celebratory cackle to shame!
I hope you and the family had a great Thanksgiving! I am thankful that you take the extra time to film some of your work. May you all be happy, healthy, and prosperous in the future.
Well said @Eric Helmer
That fuse kit is nice. I have a plethora of little boxes and kits throughout that is annoying.
That laugh at start up was priceless. I was laughing too when it turned over and ran.
That laugh was the best part of the video. Worth the view.
Once again Wes figures something out by going back to the basics.
The cynical laugh at the fix always cracks me up.
Your laughter says it all…. Every electrical issues can leave you speechless! But taking on someone else’s issues gives a guy grey hair!
The parts canon goes BOOM!!!
PUP, missing in action?
I had a 04 f-250 with the 5.4 Triton motor. Sat in a trailer park 4 years. Put a battery in it, checked all the fuses, fluids, made sure the motor was free, etc. Wouldn't crank with the key. One day I decided to jump the stater with a wire. It started just fine. Did that twice I believe, then the key worked after that.
The fuse thing reminds me of my retired mom who lives a state away from me. Had some local parts changers try to "fix" her driver's side electric window on her Honda. They threw a new regulator at it, it still didn't work, left her door card all disjointed, and charged her $290.
When I got to it the first thing I checked was for a blown fuse and guess what?!? The Honda fuse block even provides an area populated with spare fuses! Needless to say the window was working, door card properly installed, and she was good to go after three minutes of my time.
She was living with that non working window for a year, she was not amused.
Shut up
Good job Wes. You are very motivating with your knowledge of automobiles combined with your diagnostic skills and persistence. . A pleasure to watch. Thanks!
This duramax is a cadillac compered to my ranch D350!
Big fan of your style and how you go through your videos sir. Respect.
Wes, I like all your video's...including this one. Keep them coming, long, short, I'm interested and always learn something.
Common problem in my area for blown fuses on these truck is mice under the under hood fuse box. Don’t know why but they love it under there.
What a poor truck though what a piece!
And yeah they only started putting electric fuel pumps in duramaxes starting in 2017.
Sometimes its just as simple as a fuse other times its just one heck of a nightmare
Great job, good diagnostics, pity he didn’t come to you earlier!👍🇮🇪
It's a win since you walked away from that disaster. I was yelling at the screen "Don't touch it !!!" At least it's running. For now.
Wes I really love watching your videos, thanks for such great content!
A concourse example if I have ever seen one🤣. You are really knocking out these videos this week sir
Hey Wes,just started watching your channel and watched the international oil pick up tube video,done roughly the same thing with a cat 3208😭😭😭😭, really love the channel and the content.
I've become accustomed to the horrific salt damage that rolls into your shop - isn't that thing in really, REALLY good shape for a 2004?
The frame is in an amazing shape for an Iowa farm truck. But most likely a southern truck before it made it there.
Great video Wes as usual, excellent diagnostic skills, thanks & cheers from Down Under.
The Dirtymax Diesel Engine?? 😂😂😂
This is like when I took apart my brake pedal switch to clean it, only to find out that the fuse blew. I wasn’t very happy that I spent an hour looking for an issue, only to have it be the fuse.
Always an interesting watch. Thanks for posting.🇬🇧
Gotta love those " A F*&&$ing FUSE??!!!??. You gotta be kidding me" moments. hahahaha
Love your sense of humor and humility. Also, your sense of restraint at what is a very rough vehicle that has been used, let's say, poorly. That said, a few hours of work and some new parts would be nice for the poor beast. Certainly beats 70K for a new truck.
Nice work Wes
This reminds me of a truck that came into our shop. All I can remember is that it was a lifted GMC (I think) crew cab with a poorly done Escalade front end swap, I think he painted the housing on the inside of the headlight to red. The front bumper was missing. The whole truck was very poorly rattlecanned black, with the original paint visible in the light and some of the paint was missing. It was in a weird state because it was falling apart but it also had work put into it. The interior wasn't as dissasembled or as left to the elements like the truck in this video but it was rattlecanned black and gold and it looked horrible. It looked like he didn't even use tape, he probably just sprayed it by hand. All the interior lights were also red.
I "rattlecanned" an old pickup I had about 25 years ago after drinking several mixed drinks. I didn't take a wire brush to the rust that was on it but the paint job actually lasted several years and only cost me about $10 in paint (it would be closer to $30 today). I don't know if it saved me any more rust on the truck but it did look a little better.
I watched this midday today,great watch with a coffee in my hand and snow outside in the UK .Wes you are a god 👍
My absolute favorite is when you crack yourself up, it just makes my day. As always keep up the great job wes
How could one neglect a top-notch Duramax truck like that?!
When other people have been at it its like trying to figure out a jigsaw puzzle, great video Wes
With 3 pieces missing.
A jigsaw puzzle without all the pieces
@@joetrippi1603 ain't that the truth
When you spoke of batteries,I was reminded of two instances where things were just not what seemed.First was a brand new battery that had the posts marked wrong.NEG was marked POS. POS was marked NEG. Second was a new battery that had a dead cell.We tried to recover the battery but no joy.
I like that little jumper circuit device you have for testing current draw through a fuse. Neat little device.
He also could have robbed peter to pay Paul and used the 20 A fuse during a quick swap to see if a 20A would work on trailer circuit, blew it stuck it back and forgot he blew it.
Apart from the few elec gremlins it looks like a good truck, compared to some of the rusted death traps that seem to come your way 👍
My electrical engineer dad will LOVE this one! Way to go Wes!
Good point. Thanks for the look.
Fuse box cover off
Bunches of missing fuses
Inside fuse box cover off
Main fusible link cover on front of block open
Disconnected wire connector hanging down by left front wheel
All column shields off, wires everywhere
Door controller loose, who knows what the wires on the switches can touch
Seat controller loose, next to assorted seat frame rails
Center console covers loose
Wire harnesses sagging out here and there
It kinda makes me wonder if this guy has ever just fooled around with the wiring in his truck, maybe not really knowing what he is doing. Maybe he has been poking around with a screwdriver to test for voltage, and maybe popped a fuse now and then.
Your knowledge in car electrics is truely outstanding. If you don't find what's wrong, nobody will.
Someone who obviously does not have your knowledge heavily messed up the whole system while he tried to make it run. The overall state of the truck is pretty sad too. It's a shame because it's not even that rusty and could easily go through a couple more saltseasons if it was maintained better.
🤣🤣🤣🤣🤣🤣🤣✌✌ SHE WONT RUN! I TRIED EVERYTHING. Mechanic: Did you check your fuses!? LOL
Im gonna take my Dmax to Wes! As soon as i get it out of the pond..