Ok. Gin, that last item in the wrap up, is almost certainly a "brass". Here's the story: Employees would report to work (on their shift) and would walk up to a (gated) guardhouse to enter the premises for work. Office personnel were there, and one-at time,, each employee would tell the " clerk" their name and brass number. The "clerk" would check off that name and give employee his "brass" (with his/her assigned number on it. Employee puts it in his/her pocket (or wherever, and enters premises for work that day. Occasionally, an office "clerk" would randomly "spot-check" unannounced "crews"/job locations calling out the employees names one-at-a-time, and the employee had to answer " here!" or "present!" and physically show the "clerk" his "brass". The clerk would check off his/her name on the list, and so on. If someone is missing SOMEBODY in the group had BETTER know where he/she IS, and WHY he/she is in another location. The clerk MUST go verify (and physically FIND that person)... -same routine: name, brass number (with a note on the checklist as to where the employee was found, and why that person was in that location, and NOT in the assigned location. Finished "crew checklists" were then turned in to the office, for HR, company officers, foremen etc. to peruse. This kept employees from wandering off, jumping the fence to cross a road/street to "get a beer", or "extended lunch, etc. It was ALSO, very VITAL in catastrophic events, so that personnel managers, police, firemen and rescue teams (etc.) could verify QUICKLY their probable location(s) onsite, if a catastrophic event happened (fire, explosion, poisonous gas, etc.). ... I HAD a brass-checker's job during the construction of a nuclear power plant. I was to tell NO ONE which crews I was going to spot check on any given day... no matter what their rank, position, or authority (including government types). That was all "Top Secret", with only ONE person knowing who, when and where --- me. Keeps everyone honest, in-place, accountable, sober, and SAFE. Lengthy description, simple job (with a hard hat). Funny, I'd see people hurrying back to their area, knowing I'm approaching, and (sometimes) get a little upset when I walked THROUGH their area, to go check a nearby crew on the other side, looking over my shoulder & seeing them all with "brass-in-hand", " at the ready". If an employee wasn't present during a check, whereabouts unknown, & couldn't be verified, that employee got a one-on-one with the BIG boss, and would likely be fired. Everyone knew it. Enjoyed the vid. GREAT to see you back again, and doing well. Fall FORWARD, Gin. All the best,from Florida. ---Doug
Doug, you never cease to amaze me with the wealth of knowledge you share. I’ll bet having those badges in brass also helped ensure they survived in a catastrophe, much like military dog tags. Would it be absolute sacrilege if I fill the letters back in with black and polish it up with renaissance wax? I so want to refurbish that find - I love the cool font on it.😍
I must admit after watching a few videos of you using a underwater coil, I purchased a Garrett ACE 400 complete package.. I still have my Whites Coin Pro for my Grandson use. This is a fun hobby and great bonding!
Glad to see you back on, you made my night ! I fully enjoy watching you detect. You give great details! You also look great , you must workout while not filming. Your very ATTRACTIVE ! Your Blonde hair is longer !!
Gin Great video and finds Lady! That looks like a fantastic old home site for many more hunts for sure. I have the Deus II also and love the machine. Once you find the best settings for the ground you hunt, you will love it. Once you learn it you will never give it up. Love your calm and peaceful channel. Keep it up!! Many more clovers for you for luck. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀
Hello my friend - I’m always thrilled to see you pop by. 🤗 I’m looking forward to mastering the Deus…I suspect I’ll have a lot of fun this year with this machine. I was able to get one more hunt in at this farm, but alas, nothing good turned up. On to the next!🍀🍀🍀
Hello my friend - I’m always thrilled to see you pop by. 🤗 I’m looking forward to mastering the Deus…I suspect I’ll have a lot of fun this year with this machine. I was able to get one more hunt in at this farm, but alas, nothing good turned up. On to the next!🍀🍀🍀
@@LuckyGin I am looking forward to your next adventure. You will LOVE your Deus II once you get used to it. Google "Gary Blackwell". He has the best videos on the Deus II. 🍀🍀
Good to see you digging again Gin , people who have the Deus 2 say it's really good just take a little time to master it plus it's super light to swing . The mistery item looks like a old door key hole protector .Happy hunting from the U.K
Thank you, Dan. It’s really good to be back in action. I’m very impressed with how light the Deus is. The menu is a bit complex, but so far so good. I was happy with this first hunt.🙂
The buckle stamp "RAU F. Co." stands for Rau Fastener Company. The factory was in operation from 1900 until 1961 in Providence R. I. Good finds on your hunt.
I was excited to get those things with writing and be able to research them. I don’t think I’ve ever had that many items like that from one spot before.
I could watch you swing all day lol. I can tell that you really do love detecting ☺️. Keep the videos rolling our way. You know we gonna watch um. 👍⛏️😎
It’s good to see you back. Been missing your videos. I am looking forward to seeing how the XP Deus 2 works out for you. I have been debating getting one. I am from Tennessee and hunt local as well so it will be a good comparison from your hunts to mine.
It’s great to be back, Tony. I’m hoping to be far more knowledgeable with it by the time I come back from Digstock in March. There should be several seasoned Deus users there for me to soak up knowledge from. It did well on the first couple of hunts so far here in TN. I did already order some Grey Ghost headphones though, because the ones it comes with are absolutely murder on the ears.
Congrats on the Deus II purchase!! Did you consider the Manticore? Coin a-DIG-tion satisfied! Like that large buckle too! Interesting company badge. Like you're supporting small businesses. I did a shoutout for a company I bought my Minelab from. Last time I tried to locate his business I couldn't find him. Anyway, take care. - Gary from Coin a-DIG-tion.
I was just wondering if you ever found many mason jar lids around those old home sites. Then bingo you pull out an oldie! Just a word of caution when detecting around those mast trees, like oak, beech, hickory, walnut, etc. I have caught copperheads as early as the first week in February in SW Va. They tend to congregate under those trees because mice and chipmunks scavenge for any remaining nuts and they will lay in ambush for them. They disappear in leaf litter like that. So be careful! Another great video!
Wonderful video. Glad to see you out on your timetable. The research you do on the objects is a delightful bonus to your hunts. Congratulations on taking another step with becoming an ambassador for small businesses. Your videos are a welcome respite from the busy world. Thank you young lady!
@@LuckyGin, I have learned that if, at the end of the day, you can remember one great thing from the day, then you can call the day great. That is my hope for everyone.
Looking forward to seeing your next hunt in metal detecting it's inspiration to me get out there and dig and learn more about these historical sites, Thank You Gin.
I recently found a jar top like that I believe it was a Boyds genuine ceramic top ...really heavy duty late 1800s similar ones selling on ebay 25 dollars and higher
Hi Luck Gin welcome back glad to see you are back and glad your feeling better about things, good thinking about emailing you for items, that buckel interested me perhaps someone may need it to restore their bag or some leather company may need it good luck on that great finds again welcome back
Hi Gin - welcome to the world of the Deus detectors ! You did just fine on your first hunt with the Deus 2. Most who have the Deus 2 moved up from the the Deus 1 so much of the basic knowledge on the Deus platform you do not have. It would be a tremendous help for you to watch XP’s Gary Blackwell and his training videos on the Deus 2. Full tones and the XY screen are keys to not digging a lot of trash. Good luck to you on the new detector !
Hi Gin, so nice to see you! Not sure why I didn’t get notified of this video, maybe I missed it? I love that you found something that you couldn’t find an image of on the internet! It is a one of a kind, just like you, both treasures! Thanks for taking me along 🤗
You know a good test on the size of your target, can versus coin sized object, is as your swinging raise your coil and a coin will disappear the higher you go, as a can will still be reading as you go up.
I'm sure you have your answer by now, but I believe that is a radiator cap. So you were right. It is automotive. Glad to see you back! Missed ya! Can't wait till it thaws so I can get out and detect and dig for bottles! "Sherlock"! 🤣😂🤣💕
Thank you! It’s really good to finally be back. Hopefully spring will come early for us all. Hope you are staying safe down there - I saw there was flooding.😰
I heard you mentioned and saw the flowers you showed us, here in Wyoming we just received a foot of snow and it’s -8F. Welcome back hope to see more of your adventures!
Happy Springtime. Well almost anyway. Any day out detecting is a good day. That lead piece looks like a lead bullet that contacted something hard and flattened out. Good to see ya back at it. Take care.
The mystery cap item looks like an old radiator cap off an old car, or possibly a tractor. Great day of digging and cool finds! Glad to see you back in action and putting out videos again! Good luck with your new detector! Great video!
Thanks Cole. It’s really good to be back out in the field. I’ll probably kick off my first road trip of the season soon. Time to give this new machine some exercise!🤩🍀
@@LuckyGin heck yeah! That’s the spirit to have! 😎 It may take you a few hunts, but you’ll get the new machine down and find some cool finds! I switched from Garrett to Minelab back in August, and it took me a few hunts to figure it out. You’ll get it! Best of luck to you!
Great finds!! I know that someone has already made this comment, but the cap looks like a radiator cap.....however, I've never seen one w/ a center section that large. Congrats on ur business affiliation! I fully support shopping locally &/or small!!
Thanks so much my friend. Someone suggested that it might be from a really old model of car; maybe they made them without the center back then. Not sure.
In the very beginning of your video, the pieces of pottery and stuff, some of that on the ground looked like arrow heads and pieces of them around it. Great video.
Hello Lucky Gin. That’s quite the jump from a Fisher machine to a Deus 2. It’ll be great when you finally master that machine. Nice relics and stuff. Keep on diggin and Happy Hunts. _/👍
Awesome to see you have switched over to the D2 you'll love it once you learn that machine I have bought 2 of them an have been swingin the D2 since February 10 of last year. To help you out a little your buckle will mostly be made of brass or iron because copper is strong enough to hold up an would where out in no time. Maybe before you hit the beach you could hit me up on the settings that you will help you out.
I’m looking forward to getting some more hunts in and getting used to the sounds. I’m hopefully I’ll be able to adapt to it quickly. Especially looking forward to taking it to the beach and would love to hear your thoughts on beach settings.🍀
Ok. Gin, that last item in the wrap up, is almost certainly a "brass". Here's the story:
Employees would report to work (on their shift) and would walk up to a (gated) guardhouse to enter the premises for work. Office personnel were there, and one-at time,, each employee would tell the " clerk" their name and brass number. The "clerk" would check off that name and give employee his "brass" (with his/her assigned number on it. Employee puts it in his/her pocket (or wherever, and enters premises for work that day.
Occasionally, an office "clerk" would randomly "spot-check" unannounced "crews"/job locations calling out the employees names one-at-a-time, and the employee had to answer " here!" or "present!" and physically show the "clerk" his "brass". The clerk would check off his/her name on the list, and so on. If someone is missing SOMEBODY in the group had BETTER know where he/she IS, and WHY he/she is in another location. The clerk MUST go verify (and physically FIND that person)... -same routine: name, brass number (with a note on the checklist as to where the employee was found, and why that person was in that location, and NOT in the assigned location. Finished "crew checklists" were then turned in to the office, for HR, company officers, foremen etc. to peruse.
This kept employees from wandering off, jumping the fence to cross a road/street to "get a beer", or "extended lunch, etc.
It was ALSO, very VITAL in catastrophic events, so that personnel managers, police, firemen and rescue teams (etc.) could verify QUICKLY their probable location(s) onsite, if a catastrophic event happened (fire, explosion, poisonous gas, etc.). ...
I HAD a brass-checker's job during the construction of a nuclear power plant. I was to tell NO ONE which crews I was going to spot check on any given day... no matter what their rank, position, or authority (including government types). That was all "Top Secret", with only ONE person knowing who, when and where --- me. Keeps everyone honest, in-place, accountable, sober, and SAFE.
Lengthy description, simple job (with a hard hat).
Funny, I'd see people hurrying back to their area, knowing I'm approaching, and (sometimes) get a little upset when I walked THROUGH their area, to go check a nearby crew on the other side, looking over my shoulder & seeing them all with "brass-in-hand", " at the ready".
If an employee wasn't present during a check, whereabouts unknown, & couldn't be verified, that employee got a one-on-one with the BIG boss, and would likely be fired. Everyone knew it.
Enjoyed the vid. GREAT to see you back again, and doing well. Fall FORWARD, Gin.
All the best,from Florida. ---Doug
Doug, you never cease to amaze me with the wealth of knowledge you share. I’ll bet having those badges in brass also helped ensure they survived in a catastrophe, much like military dog tags. Would it be absolute sacrilege if I fill the letters back in with black and polish it up with renaissance wax? I so want to refurbish that find - I love the cool font on it.😍
I must admit after watching a few videos of you using a underwater coil, I purchased a Garrett ACE 400 complete package.. I still have my Whites Coin Pro for my Grandson use. This is a fun hobby and great bonding!
That last thing you found might be a radiator cap off a really old car
Glad to see you back on, you made my night ! I fully enjoy watching you detect. You give great details! You also look great , you must workout while not filming. Your very ATTRACTIVE ! Your Blonde hair is longer !!
Well thank you. 🥰 Indeed, I do workout. I have a personal trainer who shreds me several times a week.🤣. I suspect she likes watching me suffer.😜
Thanks for popping by Steve! I’ll tell myself it’s from an old model T.😉
Gin
Great video and finds Lady! That looks like a fantastic old home site for many more hunts for sure. I have the Deus II also and love the machine. Once you find the best settings for the ground you hunt, you will love it. Once you learn it you will never give it up.
Love your calm and peaceful channel. Keep it up!!
Many more clovers for you for luck.
🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀
Hello my friend - I’m always thrilled to see you pop by. 🤗 I’m looking forward to mastering the Deus…I suspect I’ll have a lot of fun this year with this machine. I was able to get one more hunt in at this farm, but alas, nothing good turned up. On to the next!🍀🍀🍀
Hello my friend - I’m always thrilled to see you pop by. 🤗 I’m looking forward to mastering the Deus…I suspect I’ll have a lot of fun this year with this machine. I was able to get one more hunt in at this farm, but alas, nothing good turned up. On to the next!🍀🍀🍀
@@LuckyGin I am looking forward to your next adventure. You will LOVE your Deus II once you get used to it. Google "Gary Blackwell". He has the best videos on the Deus II.
🍀🍀
Looks like an old radiator cap with the pressure relief out of the middle of it !
Great hunt. Hard to get used to new machines, but you are already finding the targets. Awesome. :)
Thanks my friend. This one definitely has a learning curve.🙂
Good to see you digging again Gin , people who have the Deus 2 say it's really good just take a little time to master it plus it's super light to swing . The mistery item looks like a old door key hole protector .Happy hunting from the U.K
Thank you, Dan. It’s really good to be back in action. I’m very impressed with how light the Deus is. The menu is a bit complex, but so far so good. I was happy with this first hunt.🙂
The buckle stamp "RAU F. Co." stands for Rau Fastener Company. The factory was in operation from 1900 until 1961 in Providence R. I. Good finds on your hunt.
I agree, Radiator cap. The hole is where the pressure release was.
Good to see you back in action my friend, thx for taking us along and enjoy that new machine!
Thanks for popping by to join me. You are much appreciated.🤗
You always bring sunshine when your metal I guess it's your beautiful eyes that's what's glowing you have a great day good luck this is Bobby
Papa Mark says its great to see you back out treasure hunting pretty Gin..Keep smiling and have a great weekend young Lady..
Big hugs to you, Papa Mark.🤗🤗🤗
Great to see you back, good luck 🍀 ❤❤❤
I loved the new video. I really liked the close ups of the items and you telling the history of the items or company etc like the buckle.
I was excited to get those things with writing and be able to research them. I don’t think I’ve ever had that many items like that from one spot before.
It don't matter if it's the beaches or if it's in the country you can't mistake those beautiful eyes and that pretty smile have a wonderful day
Tennessee is a beautiful state. I love visiting there. I live in Eastern Kentucky
Kentucky is one of the states I still need to film a hunt at. I have a goal of doing all 50 states.🙂
Always great to find anything old with writing on it.
I love it when things have writing. I always look forward to researching it to see what I’ve found. It adds another element of intrigue for sure.🙂
Good to see you are back!!!
Thank you, Jim. It’s good to be back!
Thanks for coming back on! Missed your vids and kudos on the buckle research!
You’re awesome
I enjoyed your hunt Gin it 's good to see you back. Good Luck to you.
Thank you my friend. It’s good to be back.🙂
Elated to see you back on the hunt Gin. The automotive part is probably part of a fancy radiator cap 19teens to 1930s era.
I’m elated to be back my friend. I can’t wait to see what this year holds.🤗
I could watch you swing all day lol. I can tell that you really do love detecting ☺️. Keep the videos rolling our way. You know we gonna watch um. 👍⛏️😎
Awww, well thank you. I’m so glad you enjoy them.❤️
@@LuckyGin I myself am just getting into detecting ☺️. Just received my detector in the mail yesterday 👍⛏️😎
Aaannndddd.... She's back!!!!!!! Yes yes yes...
Nice hunt, very cool finds
It’s good to see you back. Been missing your videos. I am looking forward to seeing how the XP Deus 2 works out for you. I have been debating getting one. I am from Tennessee and hunt local as well so it will be a good comparison from your hunts to mine.
It’s great to be back, Tony. I’m hoping to be far more knowledgeable with it by the time I come back from Digstock in March. There should be several seasoned Deus users there for me to soak up knowledge from. It did well on the first couple of hunts so far here in TN. I did already order some Grey Ghost headphones though, because the ones it comes with are absolutely murder on the ears.
Thanks again Gin for video..Oh and Happy New Year..and keep on swinging the metal detecting..🍀🍀🍀👍👍👍✌✌
Congrats on the Deus II purchase!! Did you consider the Manticore? Coin a-DIG-tion satisfied! Like that large buckle too! Interesting company badge. Like you're supporting small businesses. I did a shoutout for a company I bought my Minelab from. Last time I tried to locate his business I couldn't find him. Anyway, take care. - Gary from Coin a-DIG-tion.
So nice to see you again! Missed you! Great finds! Blessings!
Thanks ever so much. I’m so glad to be back and ready for an exciting new season.🤗❤️🍀
Great video! Love the references
The first thing with a hole is probably a Radiator cap !
I was just wondering if you ever found many mason jar lids around those old home sites. Then bingo you pull out an oldie! Just a word of caution when detecting around those mast trees, like oak, beech, hickory, walnut, etc. I have caught copperheads as early as the first week in February in SW Va. They tend to congregate under those trees because mice and chipmunks scavenge for any remaining nuts and they will lay in ambush for them. They disappear in leaf litter like that. So be careful! Another great video!
Fun hunt, Gin. Good to see you again.
Wonderful video. Glad to see you out on your timetable. The research you do on the objects is a delightful bonus to your hunts. Congratulations on taking another step with becoming an ambassador for small businesses. Your videos are a welcome respite from the busy world. Thank you young lady!
Thanks for being such a wonderful person, David. You always make me smile.🤗❤️🍀
@@LuckyGin, I have learned that if, at the end of the day, you can remember one great thing from the day, then you can call the day great. That is my hope for everyone.
Stumbled across your channel watching metal detecting videos while at work on Chickamauga Dam. Good content on the videos and happy hunting
Vdi 93-94 is a quarter on my deus. Ur on the right track gin I love my deus!
Looking forward to seeing your next hunt in metal detecting it's inspiration to me get out there and dig and learn more about these historical sites, Thank You Gin.
Thank you Gin looking forward to seeing you on your next hunt have fun and be safe.
Glad your back. Half the find is trying to figure out what you find.
Glad to see you back!!
Thank you! I’m really glad to be back.🙂
I recently found a jar top like that I believe it was a Boyds genuine ceramic top ...really heavy duty late 1800s similar ones selling on ebay 25 dollars and higher
Wow, I wouldn’t have guessed. I dug up several of those, but all badly damaged.
@@LuckyGin I'm sorry it said Boyds Genuine Porcelain lined cap..looks like they are selling for 20 dollars now some Zinc as much as 75
Hi Luck Gin welcome back glad to see you are back and glad your feeling better about things, good thinking about emailing you for items, that buckel interested me perhaps someone may need it to restore their bag or some leather company may need it good luck on that great finds again welcome back
Thank you - glad to be back.🙂 I think the buckle was made for bags like this - the tongue is backward, so a really unusual thing.
@@LuckyGin your welcome people do look for those hard to find items you're very observant to notice things keep it up Gin
Hi Lucky! I think you’re correct on the one piece being automotive, it looks like a part of a radiator cap
You look good for the new year and your hair looks really nice, I look forward to more videos
Thank you, Kyle. I’ve got plans for some big adventures this year.🙂
Looking 👀 good thanks for the treasure 🍀
That’s Me Jenny!!!💃💃 out finding the freakin Good Stuff 💯💯 You Go Girl and remember JUICE LOVES 🫵💃💃💃💃💃💃💃💃💃💃
Hi Gin - welcome to the world of the Deus detectors ! You did just fine on your first hunt with the Deus 2. Most who have the Deus 2 moved up from the the Deus 1 so much of the basic knowledge on the Deus platform you do not have. It would be a tremendous help for you to watch XP’s Gary Blackwell and his training videos on the Deus 2. Full tones and the XY screen are keys to not digging a lot of trash. Good luck to you on the new detector !
Been awhile Gin, warming up here too I be out next month. Good luck Gin.😃👍
Indeed, it’s been a long rough winter. I’m glad to be putting it behind me and getting this new year started.🙂
Your finds…Our treasures…Keep beep, beep, beeping along ☝🏻👍🏻🤩👀👌🏻🌞
❤️❤️❤️
I agree with the radiator cap.
I think that one peice is the cap for a radiator for a car.
you have good energy..good luck with your channel
A crummy snowy Saturday just got Sunny and bright ! Nice to see you out and about Miss. Gin !
Always sending you lots of sunshine my friend! Hopefully spring will come early for all of us this year.🍀🍀🍀
Very good videos and like that you show links to equipment.😎
Thanks so much!🙂🍀
Hello Gin so good to see your back i know it may be a little late but Happy New Year take care stay safe
Hello Keith, and thank you. I’m back kinda late so it really feels like I’m just now getting around to the New Year. Haha
Old radiator cap I believe
Hi Gin, so nice to see you! Not sure why I didn’t get notified of this video, maybe I missed it? I love that you found something that you couldn’t find an image of on the internet! It is a one of a kind, just like you, both treasures! Thanks for taking me along 🤗
Great starter Video
Welcome back LG. It's nice to have you back enjoying your detecting adventures. Wishing you lots of exciting finds in 2023.
Thank you, John. I’m optimistic that it’s going to be a really exciting year.🍀
@@LuckyGin that’s wonderful, good luck on the hunt 😄🇦🇺👍
So happy to see you back Lucky Gin, i really enjoy your videos.
Thank you, David. It’s really good to be back.🤗
You know a good test on the size of your target, can versus coin sized object, is as your swinging raise your coil and a coin will disappear the higher you go, as a can will still be reading as you go up.
Must learn that machine, good luck
I'm sure you have your answer by now, but I believe that is a radiator cap. So you were right. It is automotive. Glad to see you back! Missed ya! Can't wait till it thaws so I can get out and detect and dig for bottles! "Sherlock"! 🤣😂🤣💕
Good to see you back! I hope your are right about spring!!
I hope so too!
Gin if the item your calling a button is lead, could be a bale seal. Great research on the buckle!
Ahhhh, you might be right about that. I’ve never found one in my area so I didn’t even consider that.
Glad to see you back Gin you got some nice finds looking forward to your next video
Thank you. 🙂 I was excited to find as much as I did considering it was the first time out with the new machine.
Looks like an automotive radiator cap that’s missing the pressure release.
I think you'e right. Can still see the silver-colored paint, in spots, making it "modern-era", not a model-T, or "A", vintage-era.
very nice video good luck
Was about to ask you about your finds bag, and you built the answer right in. And yes, I am a vet, thanks!
❤️❤️❤️ My fellow vets❤️❤️❤️
Hello Gin...
Nice to see you back in the fields.... congrats on your first finds with your new machine....hope to see more videos soon! Stay safe ☺️
Thank you, Annette. It’s good to finally be back in action. I appreciate you stopping by to join me,❤️
Great to have you back.
Thank you, Jerry. It’s good to be back.🙂🍀
Sweetheart that's a freeze plug out of back in the old days tractors had real thin freeze plugs penthouse for the liquid inside the motor
Thank you, from Northern Cali, I really enjoyed this video of Tennessee treasure hunting.
Thanks for visiting, Jan. You are much appreciated!
Good to see you again! Great hunt! Loved the Buckle! Hope you are staying warm up there. God bless!
Thank you! It’s really good to finally be back. Hopefully spring will come early for us all. Hope you are staying safe down there - I saw there was flooding.😰
@@LuckyGin yes, we are just getting drizzle.
Delicious, you're posting again...
Nice work! Good to have you back.
Thank you! It’s really good to be back.🙂
Welcome back!!! Missed you and your great vids!!!
Thank you! It’s so good to be back!🤗🍀
Happy to see you back Gin.
Thank you - I’m happy to be back! Let’s go adventuring!🙌🙂🍀
Good to see you back out and sharing adventures. I also found a few metal rings like that one but also had no idea what it was.
Thank you. It’s really good to be back.🙂
I heard you mentioned and saw the flowers you showed us, here in Wyoming we just received a foot of snow and it’s -8F. Welcome back hope to see more of your adventures!
Oh man, I would just hibernate for the whole winter. I’m freezing at 50 degrees with no snow. Hope the spring thaw comes soon for you.🍀
Looks fun, I've heard of gold someplace if you want to go
That mystery item is the top cap from a pitcher pump.
Keep digging and learning.
Glad you are back!
Thank you! It feels great to be back.🙂🍀
Happy Springtime. Well almost anyway. Any day out detecting is a good day. That lead piece looks like a lead bullet that contacted something hard and flattened out. Good to see ya back at it. Take care.
Hello my friends! Thanks for popping by to say hello. It’s good to finally be getting back into the swing of things.🙂 Hope you are doing well.🍀
Glad you are back.
Thank you - it feels really good to be back.🤗🍀
Thumbs up, My Girl Gin is back 🥰
Happy to be back! Thanks for popping by!🤗❤️🍀
Cool video, you will like the deus 2
Thank you. It’s a learning curve for sure, but definitely off to a good start.🙂
Glad to see you got out my friend, see you soon!!
I can’t wait my friend!!! Let’s gooooo!
Happy to see you back 😎
Thank you - I’m glad to be back!🙌🙂🍀
The mystery cap item looks like an old radiator cap off an old car, or possibly a tractor. Great day of digging and cool finds! Glad to see you back in action and putting out videos again! Good luck with your new detector! Great video!
Thanks Cole. It’s really good to be back out in the field. I’ll probably kick off my first road trip of the season soon. Time to give this new machine some exercise!🤩🍀
@@LuckyGin heck yeah! That’s the spirit to have! 😎 It may take you a few hunts, but you’ll get the new machine down and find some cool finds! I switched from Garrett to Minelab back in August, and it took me a few hunts to figure it out. You’ll get it! Best of luck to you!
Happy to see you again Gin!
I’m happy to see you pop by, my friend. 🤗
Great finds!! I know that someone has already made this comment, but the cap looks like a radiator cap.....however, I've never seen one w/ a center section that large. Congrats on ur business affiliation! I fully support shopping locally &/or small!!
Thanks so much my friend. Someone suggested that it might be from a really old model of car; maybe they made them without the center back then. Not sure.
Fun hunt, Gin. Way to go. Keep learning the new detector!
Thank you, my friend. I should have included the blooper reel where I promptly managed to lock the machine up before I even got started.😂🤣😂.
In the very beginning of your video, the pieces of pottery and stuff, some of that on the ground looked like arrow heads and pieces of them around it. Great video.
I try to keep an eye out for arrowheads - we find them often in this area.🙂
A hello from France 🇫🇷 it’s a pleasure to see such a beautiful woman practicing these hobbies, in any case congratulations 👏👍♥️
Hello, and thank you for popping by from so far away. 🤗🍀
Hello Lucky Gin. That’s quite the jump from a Fisher machine to a Deus 2. It’ll be great when you finally master that machine. Nice relics and stuff. Keep on diggin and Happy Hunts. _/👍
Haha, yes there’s definitely going to be a learning curve. I’m really excited to see what I’ll find with it this year.🙂
That odd item looks like the top cap for a pitcher pump.
Awesome to see you have switched over to the D2 you'll love it once you learn that machine I have bought 2 of them an have been swingin the D2 since February 10 of last year.
To help you out a little your buckle will mostly be made of brass or iron because copper is strong enough to hold up an would where out in no time.
Maybe before you hit the beach you could hit me up on the settings that you will help you out.
I’m looking forward to getting some more hunts in and getting used to the sounds. I’m hopefully I’ll be able to adapt to it quickly. Especially looking forward to taking it to the beach and would love to hear your thoughts on beach settings.🍀
As always it's been a pleasure. Grumpy man coins and currency out. Peace. Good hunting.
Thanks for popping by to join me.🙂🍀
great vid, thanks
Thanks for popping by Paul.🍀
Good to see you back at it!
Thank you - it’s really good to be back.🙌🙂🍀