How to Replace Intake Gasket Chevy C/K1500 1988-2000
HTML-код
- Опубликовано: 28 сен 2021
- For More Info visit us at: 1aau.to/h/cHw/
Gaskets provide a secure seal between engine components, and the intake manifold gasket is no different. The intake manifold for the Chevy K1500 also has water passages for coolant, so a secure gasket is especially important. This video shows you how to install a new intake manifold gasket on your 1988-2002 Chevy K1500 Pickup.
• Check here for more videos on the 1988-2002 Chevy K1500 • Chevy K1500 Pickup 198...
This process should be similar on the following vehicles:
1988 Chevrolet K1500 Truck
1989 Chevrolet K1500 Truck
1990 Chevrolet K1500 Truck
1991 Chevrolet K1500 Truck
1992 Chevrolet K1500 Truck
1993 Chevrolet K1500 Truck
1994 Chevrolet K1500 Truck
1995 Chevrolet K1500 Truck
1996 Chevrolet K1500 Truck
1997 Chevrolet K1500 Truck
1998 Chevrolet K1500 Truck
1999 Chevrolet K1500 Truck
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pocket Screwdriver
• 16mm Wrench
• Air Blow Gun
• Vacuum
• 5/8 Inch Spark Plug Socket
• Socket Extensions 1aau.to/oa/1AXAA00015
• Torque Wrench 1aau.to/oa/1AXAA00044
• 1-1/16 Inch Wrench
• Brake Parts Cleaner
• Marker / Writing Utensil
• Painter's Tape
• Paper Towels 1aau.to/oa/1AXSS00035
• RTV
• Sandpaper
• Drain Pan 1aau.to/oa/1AXAA00320
• Pick 1aau.to/oa/1AXAA00037
• Rubber Mallet 1aau.to/oa/1AXAA00413
• Sanding Block
Subscribe: / @trq
Check out our playlist:
Chevy K1500 Pickup 1988-2002: • Chevy K1500 Pickup 198...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Guy at the shop told me it would take his guy about 4 hours to do this job. It's gonna be 4 hours cleaning!
Thanks for the detailed video. I did this on my 1991 C1500 4.3 with your video. Turned out great.
I need to change mine. I know i can do the job, I just dont want to mess up the timing but wish me luck
Cool vid, thanks for making it. Do you recommend replacing the quick-release heater hose fitting at the back of the intake with a normal hose fitting? I've heard they leak as they age. Also, the workshop manual I saw said intake bolts are torqued to 35 ft pounds and not 25? UPDATE: My heater hose snapped off so easily while trying to unscrew it, definitely replace it.
Excellent video my friend
giving socket sizes need would have been a big plus.
Great video, thank you
out of curiosity what type of racket was that you using seems to be battery i didn't notice a hose
I see you didn't speak about the egr valve portion of the intake gasket. I replaced my engine and noticed that the egr ports on the passenger cylinder head between 6 and 8 don't exsist. I'm trying to figure out why I keep getting a code 32 for the egr valve and the only thing I've figured is that my old engine never had the holes in the cylinder head and my reman engine does not have them either. is there something you can let me know regarding this? I've looked at all sorts of reman engines and none of them have these 2 ports on the passenger cylinder head. I can't find reman cylinder heads that show these ports either. I'm just trying to figure out my problem. my engine seems to run fine. but I still get the code 32. looking for some insight as to why this is being over looked.
How common is it for these intake manifold to warp or crack I swear I have a intake manifold leak on my 91 k1500 did it once ran great for 1 month then started missing at idle again
Excellent tutorial. Subscribed. Have watched it about ten times in my own intake gasket journey.
I tried my best to label the various cables and took pictures, too, but I don’t know how it’s going to work out, lol.
What grit sandpaper were you using?
Also, I love your tools.
Thanks buddy
and always check timing after job is complete does take much to throw it out. just done one today even though it lined right back i still was 2 degrees -
what is the compnent called that the radeator hose attaches too? the one with the gasket that you need to replace if you take it off
Thermostat housing. Inside is the Thermostat
Anyone have any idea what the black and blue harness on the far left connects to at 1:28 in the video. I got the job done but it seems like I either disconnected the harness during disassembly or it was already like that when I bought the truck.
Goes to the tps
Nice job
+Diesel 158 Thanks for watching our video! 1aau.to/m/Shop-TRQ
EXCELLENT ! ! !
Ok so I for sure have top dead center set but my rotor isn't facing forwards. The number 1 piston is up, timing mark is at 0 on harmonic balancer but dist isn't right.
When bought the truck #1 on cap started at like 7-8ish o'clock . Timing mark was about 180° from 0.
Am I missing something or did previous owner mess up? 🤔
As long as the truck was running fine prior then you should be fine. When I removed mine it was practically facing the firewall. I’d say around 10 almost 11 o’clock. My truck was running in time prior to starting the job. Hopefully I’m not too late bud
The rear water ports being blocked off causes these engines to overheat. The correct gaskets have all 3 ports for each side fully open.
not on tbi engines.
HOW LONG SHOULD THIS TAKE
bolts are backward on the bracket you showed stud should be toward fron of engine with bracket off ac area
Will this cause coolant leak into oil pan??
Yes it could
Great
Do the two covered sides of the gasket go to the back?
Yip
We're are u located so u can do mine
how to find the location of the knock sensor, the wiring is short behind the distributor ,,, not the one near the oil pressure sensor, but the second one?
Knock sensor is on passenger side of block under exhaust manifold
How long should I wait to start the truck ?
Could have demonstrated adjusting distributor one notch. Still a good video.
What would be the signs that this should be done on an engine?
If your leaking coolant or oil from the intake or if your coolant and oil is mixing
I just found an oil leak on the upper driver side lf my 5.7. And god i hope it isn't coming from the intake.. Because that doesn't look like a cheap repair..
What size tap did he use?
Probably a 3/8” by 16. A tap and die set will have measuring gauges.
Hot air intake
why bother bringing the engine to compression tdc if you are not going to turn it? just mark the position of the rotor in relation to the body. anyway you gonna need to adjust the base timing at the end.
garages are looking at 1300 bucks to do this
Wearing gloves smart
Of course this is a benzine engine 🙄 because I have a 6.5 on my suburban K2500