Hey man, this morning I just wanted to thank you for all the knowledge you've given me. You're the only pressure washer on the internet I trust. I started my business last spring and it's extremely successful and I even used the free pictures you let us use for our new businesses. I owe it to you man God Bless 🙏🇺🇲
17gpm - All-Flo 1/2 in. NPT Diaphragm Pump - $700 + Rolair 6.5 Hp Honda 13.8 Cfm@90Psi - $1500 - IMO is a good softwash set up with accurate proportioner . For oily greasy concrete surfaces like service stations, dumpster pads, fast food driveways, banks, etc. use your pressure washer and x-jet 2.5 cups to 5gal of Sodium Hydroxide plus 1/4 cup Blue Dawn, finish with surface cleaner. Hot water is better for grease/oil.
hey man that’s awesome news! hope the kiddo comes into the world all safe & sound, and hope you and wife get to spend some nice time together this winter 🤙🏻
Congratulations on your baby!!! Kids are SO amazing, bro! I have 6 of my own....😅 I know you're fallin in love with that kid. That baby's gonna absolutely change who you are as a man, guaranteed!
FYI - If you are putting 2000psi into a 50' 3/8" hose the psi at 50' would be 1985psi, 1880psi at 100' and 1522 at 200'. If you reduce the pressure to 1000psi the psi at 100' would be 880psi, at 200' 522psi. In a scenario with no restrictions or bends, the flow rate is not affected by the length of the hose. Hence, the flow rate would remain at X GPM at the end of the 100-foot hose or any length for that matter.
I’m glad I watched this video. Someone starting out though for a side hustle. What type of power washing machine should I get? Like psi and gpm? Thanks man any info helps.. great job
I’m surprised the foundation didn’t get cleaned. Is this normal to not do it as part of your house wash ? Or was it left out as part of the deal? Sincerely curious, not trying to sound like a smart ass lol. I’m just beginning to learn about all this stuff
Do you use any surfactants? If so, what surfactant do you use? I’m from New Zealand and seems difficult to find any info regarding surfactants. Any help would be appreciated.
Is there a particular reason you guys in the USA dont use water fed poles? For most single level buildings I use a water fed pole and it massively limits the amount of wetting down that has to be done
Is that ball valve you turned on for the SH line the flopro you were using before? We are 12volting and I think that model (?) is likely what we've been looking for.
Hi. my name is Jon. I bought your 8gpm build sheet and I see you use a K7/K1 unloader, I don't understand why people selling the IGX 800 plus people that use it say that you cant use flow sensitive unloaders like K7/K1 with IGX 700/800, and did you build your own pressure washer or did you get it sent to you prebuilt? Another thing I am very confused about is how you use a 4000 PSI AR pump when my K1 unloader is only good to 3600 PSI( I actually busted my old K1 when I used my old 4000 psi pump before I blew it up). I am looking into buy one in the future please help with these questions. Thanks!
Hey Jon. You can use the k7/k1 "at your own risk" kind of thing. No company will tell you to do so because they don't want the risk of liability, but I've never had a problem with it and it's a great unloader. The unloader isn't the issue, it's using thr k7 to run a low pressure rated gun. The igx800 and pump came as one unit. I did everything else.
What kind of gas soft wash set up are you running? I’ve been looking at the AR 25 versus the AR 45 Honda set up. Ones 11 1/2 gallons per minute and the other is seven-ish gallons per minute. Do you think 11 1/2 is overkill?
11.5 is a lot. i’m happy with my 8 for residential and commercial. with the 8 sometimes the water supply doesn’t keep up with the machine so the tanks run dry. 11 would be way worse unless you always have good flow at sites. mine is a honda igx800 machine with a 8gpm AR pump
Hey man I got a house with a bunch of red flags! Would you pass on this? It was damaged in hurricane Ian and is a purchased abandoned house with wires showing and the roof looks like it might cave in
@@YoungAmbitionYA when downstreaming from a 5 gallon bucket, is the PW engine to be running when spraying or should i be spraying with the normal water pressure from the water hose going through the PW, then to gun (before i crank the engine)?
Hey another great video and congrats on the coming baby, wife an I have 5 13yrs to 30yrs. Anyway noticed you mentioned 3/4 line on your 12v side now an a previous video you had upgraded from 1/2 to 5/8- did you upgrade from 5/8 id to 3/4 id an if so is there a little more distance like there was when you went from 1/2 to 5/8 ?
The pressure washers channel has a video comparing 150' 5/8" vs 3/4" but with a booster pump for soft washing. I think YA is sticking with the 5/8" hose on the reel.
@@YoungAmbitionYA yeah I'm copying your 12v setup so hopefully get to start using it soon. Just need to put it together. Also I noticed you placed the dryer vent mesh guard upside down afterwards. Just a heads up.
@@YoungAmbitionYA Thank you for your reply, just wondering since I was already planning on 1/2 to 5/8 myself for next season. Enjoy your family,holidays coming and be safe.....
@@YoungAmbitionYA Thank you so much for your response. Sorry to bother you again just one last question; do you feel comfortable spraying with 1.25% in terms of not affecting the landscape even watering before, during and after performing the house wash? Thank you!!!
Be sure to check the video description for helpful info, content and links!
Hey man, this morning I just wanted to thank you for all the knowledge you've given me. You're the only pressure washer on the internet I trust. I started my business last spring and it's extremely successful and I even used the free pictures you let us use for our new businesses. I owe it to you man God Bless 🙏🇺🇲
What's up brotha that's incredible! You did all the hard work. Glad it was helpful
What free pictures?
17gpm - All-Flo 1/2 in. NPT Diaphragm Pump - $700 + Rolair 6.5 Hp Honda 13.8 Cfm@90Psi - $1500 - IMO is a good softwash set up with accurate proportioner . For oily greasy concrete surfaces like service stations, dumpster pads, fast food driveways, banks, etc. use your pressure washer and x-jet 2.5 cups to 5gal of Sodium Hydroxide plus 1/4 cup Blue Dawn, finish with surface cleaner. Hot water is better for grease/oil.
hey man that’s awesome news! hope the kiddo comes into the world all safe & sound, and hope you and wife get to spend some nice time together this winter 🤙🏻
Thanks brother!
Congrats man. Wishing all the best to you and your family!
🙂🤙 thanks!
Congratulations on your baby!!! Kids are SO amazing, bro! I have 6 of my own....😅 I know you're fallin in love with that kid. That baby's gonna absolutely change who you are as a man, guaranteed!
Already has! It's great! Thanks Bryan
FYI - If you are putting 2000psi into a 50' 3/8" hose the psi at 50' would be 1985psi, 1880psi at 100' and 1522 at 200'. If you reduce the pressure to 1000psi the psi at 100' would be 880psi, at 200' 522psi. In a scenario with no restrictions or bends, the flow rate is not affected by the length of the hose. Hence, the flow rate would remain at X GPM at the end of the 100-foot hose or any length for that matter.
Great info! Thanks!
I extremely like the video, man. Very helpful and informative. Thank you very much. It is presented so well too. Great, positive work.
Glad it was helpful!
Congrats bro what a blessing, my daughter was just born on the 16th.
Thank you! Congrats to you!
Great to hear. Good luck to you and the wife
Thanks Mike 🤙
Congrats brotha! Now it gets fun and tough lol
😬🤙
That awesome to hear. Congratulations btw 🎉
Thank you!
Congratulations man!
😊 thank you
Nice congratulations on baby coming!
Thanks 🤙
Hey Eric. The solid part of the dryer vent cage should be turned so it is above the vent to keep the rain out.
Yes caught that before I left 🤙
Hope you are doing good man!
Thanks for the video.
You are welcome!
Can you use that remote system to open and close ball valve for your pressure washer as well it just soft wash system?
Congratulations
Congratulations on the upcoming birth of your child. The first few months are hard, but it’s worth it.
Thanks! 🤙
I’m glad I watched this video. Someone starting out though for a side hustle. What type of power washing machine should I get? Like psi and gpm? Thanks man any info helps.. great job
I'd suggest 5.5 gpm honda down stream. You'll never have to upgrade unless you want 8gpm which is nice but not necessary
Can't purchase liability sheet or sales pitch on link . Any other options? Thanks
Congrats on prepping to welcome a child into the world. The first 6 months is a bit stressful but worth every minute.
Looking forward to every moment 😊
That’s so awesome man what a proud proud father you are I’m so glad that you have had such a good year congratulations man.🙏😳😬
Man downstreaming is so much easier.
I’m surprised the foundation didn’t get cleaned. Is this normal to not do it as part of your house wash ? Or was it left out as part of the deal? Sincerely curious, not trying to sound like a smart ass lol. I’m just beginning to learn about all this stuff
Each job is different.. all depends on what the customer wants
Hey man, love the vids! Wondering if you'd discuss how you set up your FB ads? Target audience, the offer, etc? Thank you!
I have a video on that from 2 years back. May do a new one
@@YoungAmbitionYA I'd like that if you were up to it!
Did u put that vent cage upside down? The solid part should go on top so rain keeps out better.
Yes caught that before I left 🤙
Do you use any surfactants? If so, what surfactant do you use? I’m from New Zealand and seems difficult to find any info regarding surfactants. Any help would be appreciated.
Check the website panhandlepowerwashsupply.com I get my soap from them
Is there a particular reason you guys in the USA dont use water fed poles? For most single level buildings I use a water fed pole and it massively limits the amount of wetting down that has to be done
Many guys use them, I just don't at the moment
How late into the season do typically make it up there? Great content brotha. Keep grinding.
I'll be wrapping up early November. Depends on when the freezing temps at night move in
Is that ball valve you turned on for the SH line the flopro you were using before? We are 12volting and I think that model (?) is likely what we've been looking for.
The flowpro is used on my downstream side. On 12v I made my own remote box
@@YoungAmbitionYA Do you have a video walking through the build? I'd love some direction on this.
Hi. my name is Jon. I bought your 8gpm build sheet and I see you use a K7/K1 unloader, I don't understand why people selling the IGX 800 plus people that use it say that you cant use flow sensitive unloaders like K7/K1 with IGX 700/800, and did you build your own pressure washer or did you get it sent to you prebuilt? Another thing I am very confused about is how you use a 4000 PSI AR pump when my K1 unloader is only good to 3600 PSI( I actually busted my old K1 when I used my old 4000 psi pump before I blew it up). I am looking into buy one in the future please help with these questions. Thanks!
Hey Jon. You can use the k7/k1 "at your own risk" kind of thing. No company will tell you to do so because they don't want the risk of liability, but I've never had a problem with it and it's a great unloader. The unloader isn't the issue, it's using thr k7 to run a low pressure rated gun. The igx800 and pump came as one unit. I did everything else.
What pump were you using on the gas powered engine and the PSI and GPM?
It's a honda igx800 with a 8gpm AR pump
What kind of gas soft wash set up are you running? I’ve been looking at the AR 25 versus the AR 45 Honda set up. Ones 11 1/2 gallons per minute and the other is seven-ish gallons per minute. Do you think 11 1/2 is overkill?
11.5 is a lot. i’m happy with my 8 for residential and commercial. with the 8 sometimes the water supply doesn’t keep up with the machine so the tanks run dry. 11 would be way worse unless you always have good flow at sites. mine is a honda igx800 machine with a 8gpm AR pump
Hey man I got a house with a bunch of red flags! Would you pass on this? It was damaged in hurricane Ian and is a purchased abandoned house with wires showing and the roof looks like it might cave in
Lol damn. I would want a waiver signed and payment up front. If they do that then go ahead. If not walk away
Should the gas engine from pressure water be on if downstreaming or just the normal water pressure?
Not sure what you mean
@@YoungAmbitionYA when downstreaming from a 5 gallon bucket, is the PW engine to be running when spraying or should i be spraying with the normal water pressure from the water hose going through the PW, then to gun (before i crank the engine)?
With the motor on.
Hey another great video and congrats on the coming baby, wife an I have 5 13yrs to 30yrs. Anyway noticed you mentioned 3/4 line on your 12v side now an a previous video you had upgraded from 1/2 to 5/8- did you upgrade from 5/8 id to 3/4 id an if so is there a little more distance like there was when you went from 1/2 to 5/8 ?
The pressure washers channel has a video comparing 150' 5/8" vs 3/4" but with a booster pump for soft washing. I think YA is sticking with the 5/8" hose on the reel.
5/8 on the reel. Upgraded tank to pump and pump to reel 1/2 to 3/4 hoses, fittings and bulk heads. Flojet 6gpm pump has 3/4 in and out barbs
Correct
@@YoungAmbitionYA yeah I'm copying your 12v setup so hopefully get to start using it soon. Just need to put it together. Also I noticed you placed the dryer vent mesh guard upside down afterwards. Just a heads up.
@@YoungAmbitionYA Thank you for your reply, just wondering since I was already planning on 1/2 to 5/8 myself for next season. Enjoy your family,holidays coming and be safe.....
Hi handsome. Are yoy recomending using 8gpm using your pw?
Yes I love my 8gpm pressure washer
Is that a m5 u have in the left corner video?
Yes sir
@@YoungAmbitionYAwhat are you using with the m5? Pressure washer?
Heck Yeahh brother I would love some help with marketing!🔥
Hit me up
What ratio mix you are using 1.25% sodium Hypochlorite? Excellent video?
Yes sir
@@YoungAmbitionYA Thank you so much for your response. Sorry to bother you again just one last question; do you feel comfortable spraying with 1.25% in terms of not affecting the landscape even watering before, during and after performing the house wash? Thank you!!!
Are you still doing the sit down Q&A ?
I haven't in awhile. Might do some Lives soon
You don't use soap when you house wash?
I do with downstream. Not with 12v
How’s vent cleaning working out for you ?
Loving it
Hey man did you have to get any other licensing or insurance for the vent cleaning? I’d like to add it to my service list.
Nope
We tried to tell you to push that softwash to the side and start downstreaming.
Congrats on the child. First one is the hardest until you get into a rhythm.
Thank you! 😊
@@YoungAmbitionYA you’re welcome
What guns do you use?
12v - sutner st510
Gas - sutner 2305
Was beginning to think you fell off a roof or something! ;)
Haha not yet!
You really have upgraded from your Reg you had a few years back. How is your friend doing I think his name was Chris had a broken leg
Yes we did! Chris is well he's washing in south Carolina now
It's good to see you back on RUclips and happy New Years 2023
first 😎
6 weeks ! It goes fast doesn’t it
Too fast
Go with gas