Good video. Thanks. Suggestions: Include some mention of the location of the downstream sensor and connector - left/right and front/back. Include some mention of whether the engine/exhaust system should be cool or warm. Thanks.
Your vehicle check engine should signal when they’ve failed or are faulty. 1148 & pp31 are the codes I got when I needed to replace them. (2009 Nissan Versa)
The sensor that was put in the vehicle is that's the right sensor correct? I have a 2012 Nissan Versa 1.6 litre sedan and I don't know what it looks like until my mechanic is going to put the new sensor but I have the same sensor that I purchase so I just wanted to make sure thanks in advance.
The oxygen sensor for 2019 Nissan versa sv is located on top behind the engine not on the driver side as depicted in this video. It has a male connector.
I just removed my upstream O2 sensor from my 2015 Versa Note, it was gaulded on the pipe took forever to get the sensor out, I went to put the new one in and it will not screw all the way in. I can get the sensor screwed in the hole to about 95% of the way in and it just spins after that. Any suggestions?
So I was doing this but while doing so I found a tube that wasn’t connected to anything is that a fuel line or what ? There wasn’t a c clamp or anything that I can find to connect it too
Can someone please help me I got a issue with my versa 2008 it pop up a code p0132 it run rough and then after like 20 mph it smooth out can that probably be the o2 sensor? Please help me I been look everything
"if you removed the air intake housing" Honestly I'm not sure how you can get into all that without removing it. 😂 I wanna save some cash and do this myself but man... I don't wanna.
Thank you for the video! The oxygen sensor requires a special socket guys :) Any o’Reilly or autozone should have them :)
What socket is it??
@@305tyrone4 it's literally called a oxygen sensor socket bud
Good video. Thanks. Suggestions: Include some mention of the location of the downstream sensor and connector - left/right and front/back. Include some mention of whether the engine/exhaust system should be cool or warm. Thanks.
you video is informative but you forget to mention which tools you used to remove / fix the sensores.
You made that look easy
Right. Too easy. These jobs always take 10 times longer than you expect.
Great quality video. Simple steps. Thanks 🙏🏽
You're welcome!
Can you post the link to where you got your o2 sensor? (Also for upstream if possible).
Great video! How often are the oxygen sensors needs placement.
Your vehicle check engine should signal when they’ve failed or are faulty. 1148 & pp31 are the codes I got when I needed to replace them. (2009 Nissan Versa)
Approximately how long does it take to do this? My issue is bank one sensor one.
crow foot is 22mm ( I did it yesterday with a 7/8
Bro thank you so much
Great video. You you have the model of the O2 sensors?
What size mm socket was it to remove the sensor
Thank you it helps me a lot
The sensor that was put in the vehicle is that's the right sensor correct? I have a 2012 Nissan Versa 1.6 litre sedan and I don't know what it looks like until my mechanic is going to put the new sensor but I have the same sensor that I purchase so I just wanted to make sure thanks in advance.
The oxygen sensor for 2019 Nissan versa sv is located on top behind the engine not on the driver side as depicted in this video. It has a male connector.
For the upstream sensor I would remove the intake tubes and unscrew and move throttle body out of the way. Leave the air box in place.
bro, hwwhat is the name of the tool taht you used for the last sensor?
Downstream sensor on passenger side or drivers side?
felicidades por el video , una pregunta, (yo no soy eléctrico) ,significa que son dos sensores los que tendría que cambiar a mi auto?.gracias
misma duda
I just removed my upstream O2 sensor from my 2015 Versa Note, it was gaulded on the pipe took forever to get the sensor out, I went to put the new one in and it will not screw all the way in. I can get the sensor screwed in the hole to about 95% of the way in and it just spins after that. Any suggestions?
Good video man thanks
So I was doing this but while doing so I found a tube that wasn’t connected to anything is that a fuel line or what ? There wasn’t a c clamp or anything that I can find to connect it too
What size is the crows foot socket?
It's an important question.
Is this also called the air/fuel sensor?
Yes
I have a p0420 code on my 2010 Versa do I replace both upstream and downstream sensors.
Replacing both will help. It's best to replace them together
This is one crappy car.
Can someone please help me I got a issue with my versa 2008 it pop up a code p0132 it run rough and then after like 20 mph it smooth out can that probably be the o2 sensor? Please help me I been look everything
Oxygen sensor switch 14 size or 16
Good video. Thanks. Mi Versa2014 tiene código P0138. SENSOR OXIGENO CALENTADO 2(B1). En mi vehículo dónde lo puedo ubicar?
Why would you reinstall old sensor?
No part numbers?
Tool specs?
Come on.....
"if you removed the air intake housing"
Honestly I'm not sure how you can get into all that without removing it. 😂 I wanna save some cash and do this myself but man... I don't wanna.
They never show how to reset the light on back off from check engine on
Oh my god i hate this car, this design is so bad. Its so much easier on many kther cars