Это видео недоступно.
Сожалеем об этом.
HOW TO mine DUINO COIN with your RASPBERRY PI Pico?! | Raspberry Pi Pico
HTML-код
- Опубликовано: 27 янв 2024
- In this video we show you how to set your Raspberry Pi Pico to work. If you have a Pico lying around doing nothing, you can use it to mine a few Ducos. we do not advise you to buy a pico specifically for mining. An ESP32 is a much better option for that.
Mining Duino-Coin will not make you rich, but it is a lot of fun. You can get rewards for achievements like using certain equipment or just by mining your first 100 Duino Coins (Duco). Duino is an original crypto coin project developed by a team of young developers that focuses on energy efficient mining. It's mostly, but not only, dedicated to people who are just starting out in the crypto world as it doesn't require any expensive equipment. Duino-Coin has a very active community on Discord.
Bloxy Labs is now present on X! Follow us to see what we are doing and share your own ideas with us!!
/ bloxy_labs
If you liked the project, please consider buying us a cup of coffee.🧡
www.buymeacoff...
Check also the Duino Coin website: duinocoin.com/
Very good video, thank you
Hello Im running into this issue: So i loaded micropython to my new picos and they work with thonny, so i tried loading the arduino code to pico as in the video, but ii always got this error: Sketch uses 55588 bytes (2%) of program storage space. Maximum is 2093056 bytes.
Global variables use 10524 bytes (4%) of dynamic memory, leaving 251620 bytes for local variables. Maximum is 262144 bytes.
Resetting /dev/ttyACM0
Converting to uf2, output size: 146944, start address: 0x2000
Scanning for RP2040 devices
No drive to deploy.
Failed uploading: uploading error: exit status 1
(On pop-os, I also tried windows... The same problem)
Cant we mine without pluging it to the pc (through wifi) ?
Not with a raspberry Pi Pico, but you can use a ESP32 or 8266. Check this video: ruclips.net/video/vfF1mI8tUTs/видео.html
@@BloxyLabs ok bro.. Thanks 🤟
What to do if pi pico does not show up in device manager nor arduino as com port? I cannot upload the code
The first check is to be sure the cable you use supports data transfer. Second hold the little button down when you plug it in to your computer.