Это видео недоступно.
Сожалеем об этом.
HOW TO REPLACE A CLUTCH PEDAL MASTER CYLINDER ON A FORD FOCUS 2011 2018
HTML-код
- Опубликовано: 16 авг 2024
- Does your clutch pedal in your Focus crunch? click? leak fluid? or is stuck either halfway down or fully ??
worried about expensive repairs??
Fear not in this video I will show you the cause and repair of your clutch master cylinder woes....
BE WARNED THIS JOB MAY STRESS YOU OUT!
but lets try make it as stress free as possible eh?
All video / images belong to me and remain my property, they are not permitted for use without prior permission.
Music:
All off youtube
Dub Eastern 3:53 Kevin MacLeod Reggae | Funky
You're free to use this song in any of your videos, but you must include the following in your video description:
Dub Eastern by Kevin MacLeod is licensed under a Creative Commons Attribution licence (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/
Hey mate, awesome video!!!! just wish i could have found it easier! I tried searchin TDCI and 2007 and then found this and its almost identical and gives me SO MUCH INSIGHT that i wouldnt have had without this video. THANKS FOR TAKING THE TIME TO MAKE IT!!!
Pete Hines thanks for the kind comments, glad I could help 👍👍👍👍
@@ALLTHINGSJIM a)
I ordered my master cylinder after discovering a leak from where the clutch pedal meets its pivot point. This is the best video i've found to help replace it, even if it is still pictures and a right hand drive. I'm in the US. But this should be able to guide me for this repair. I might make my own video, we'll see. If I do make a video I'd like to leave a link in these comments for others if they are going through what i'm going through.
Most awkward job i think ive ever tackled... Never lost so much skin in my life lol.. Excellent video, thank you for posting..🍀👍
David Buchanan Hey which car did you change it on? I was quoted $1049.00 dollars. I'm hoping to do myself!! 2013 focus st
Jonathan Akers Its a 2005 duratec mk2 2.0 16v 140bhp chain driven cam.
Kuddos for mentioning that little seal! It can cause a huge problem! When you dont even notice it in disassembly and lose it.
You're channel is very helpful source of information, 1 of the best on this utube.....i just did mine and saved me a tone of cash at the mechanic, cheese from Australia down under
Thanks! Glad it helped, thanks for watching and commenting 👍
Great video Thanks mate! Just about to tackle one at work and was hoping for a quick twist out job lol how wrong I was! At least now a know what must be done. 👍
Thanks for the video Jim, it gave me the confidence and knowdledge to attempt this job. Don't think you need to remove those scuttles. Maybe it makes access a little easier, but not much. Master cyl; twist to the right to remove (viewed from pipe end). You can see the little ramps which facilitate insertion. I lubed my new one with a bit of fairy liquid which helped it slip in nice and easy :)
You may want to specify British. Looks like I have to remove the battery and the air filter box as well.
Really helpful video just done the master cylinder on my wifes car this video was so helpful thank you for posting.
Just loved your video.
It gave me a lot of insite, and did, indeed decrease my stress-level.
THANKS JIM !!
i have a 2016 ford focus manual transmission with the 1.0 ltr ecoboost engine,,my clutch pedal doesnt move up,,and the mechanic i brought it to said he has to remove the transmission to replace the master cylinder,,is he right?
Hi you made it look easy unbolting it. I did the same way, only to hit the safety bar behind the dashboard, ..
very complex exchange. Does brake fluid also go for the clutch pedal?
Hi, like the video, struggling to get clutch master cylinder in the slot?
nice job
can i watch the full video
i have 2005 reg mk2 ford focus
Very helpful the best I've watched.
Glad it was helpful!
My focus has a very hard pedal and it feels like the clutch comes out very slowly, could that be the cause?
I got Clutch position sensor A circuit high code p0808. All sensors are plugged in. Any suggestion how to fix ?
Hy. Thanks for the video. It was very usefull. Now i m at the second intervention that was looking good until restart. Now i have 2 errors: tire sensor error+parking aid sensor error and also wont unlock the steering column.
Do You have Any idea what i ve done wrong?
hi Jim great info ,Im replacing the master cylinder on my focus but there is additional sensor at the other end of the master cylinder engine side any ideas what this does cheers
I probably would if I could see it aha. Where exactly is it fitted? On the master cylinder itself or a pipe?
Great video, everything exactly as described. I just can’t seem to get the pedal out, I’ve tried twisting turning wiggling, just about everything. Is there a certain movement or direction you found worked best?
He was just extremely lucky. Best bet is to just make enough space to get some pump pliers on the cylinder to rotate it and squeeze it out between the bulkhead and pedal box.
Hi Jim on the master cylinder itself it clips to the side has a square block connector think it might be clutch position sensor
Yeah most likley 👍
Since clutch master cylinder and brakes uses the same fluid. Do I have to bleed brakes too after I pour all the brake fluid from the reservoir?
If youve drained is soley from sucking it out the clutch feed pipe and left the rest of the brake fluid in the reservoir then no, if youve sucked all the fluid completely out of the reservoir so its bone dry its probably best to even though there will still be fluid in the brake lines. 👍
This causes clutch pedal to stick? Sometimes to the floor!? Ford obviously knew about this which is why they made a metal replacement. Why has there been no recall on this. This is a massive safety issue.
Yeah, and I have no idea tbh!
My Volvo s40 is doing this pedal on the floor might try this ..
Currently have this issue. Damn, looks like a more serious job than I thought :(
2:37 loosen it or lose it?
Hello thanks for making this video, do you know where I can get that metal push rod replacement from?
Thanks
Any main dealers as its a superseeded part, you might find one on ebay or a automotive parts supplier too
When I press the clutch pedal it squeaks. What should I replace? Car: Focus Mk3, 1.0 EcoBoost.
Mine squeaks too and after checking it my clutch master cylinder is leaking brake fluid and it runs onto the rubber spring cover causing it to squeak. Dealership price for entire assembly was only 114.00 with tax
How long is the job
Depends on your skill level, id recommend atleast 2 hours
Would a symptom be brake fluid leaking on your clutch pedal?
Yes 👍
@@ALLTHINGSJIM Thank you for the content. Changed my daughter's clutch master cylinder couple days ago, such a tight space to get to. Which made it physically taxing. We got it done though.
Do you have a part number or when I can get one with the metal bit on only ones I find online are plastic
Sorry I dont but if you pop into or call any ford main dealers parts department they would be able to give you it 👍
Did you remove the steering wheel column for this? It is not mentioned as a step so I would suspect not?
Why was the connection to the steering rack removed?
No the column wasnt removed, the lower column was disconnected from the rack as shown because otherwise you dont have enough room to pull out the pedal assembly 👍
Thank you for this great video !
Can you confirm that they are 2 clutch pedal sensors/switches ? I think that one of mines not working (no more Start&Stop), so I've checked the first (in your video), easy to remove and working fine, but didn't see the second (top sensor) because it's more difficult to acces.
If your stop start has stopped working you might want to charge your cars battery , stop start will stop working once the battery charge level drops below 70% once its charged test it again, you may need to get it re activated if it doesnt start working after a few engine cycles too. I say all this as most peoples stop start problems I ever have as due to a discharged battery
@@ALLTHINGSJIM Thank you for your answer ! I've checked the both sensors, and they're working fine, so It's probably the battery, nearly 8 years old, so it's time to change it.
Hi Guys, should i put any type of grease anywhere on the shaft or tip?
Heard it’s a must in this procedure but haven’t really understood where exactly to grease it
No dont grease it at all. They arnt designed to have grease on them 👍
Thank you a lot!
Ive changed this on mine and my car wont rev past 3.5k rpm when stationary so thinking its one of the 3 sensors, what does each sensor do.. 2 inside the car and the sensor on the master cylinder?
When in park your car is factory tuned to not allow you to rev past 3.5k rpm nothing to do with the sensors.
cruise control minor
Anyone know if this is the basically the same procedure for a 2011 fiesta?
Anyone lol? I am leaking fluid out to the point i cant go into any gear i thnk its the master cyclinder.
I had mazda zoom 3 2005 manule From where i can get one with steel arm i replace it 2 times withen 3 years and the origenal one has a plastic arm?
Sameh Saad im not too sure about getting the part for a mazda, but the ford one i use in video is a main dealer part, ford knew it was a problem with them snapping so they modified the arm to a metal one instead of plastic
I changed the complete clutch and flywheel set on Focus MK2 1.4 petrol, but the pedal started to get heavy. We bleeded the liquid, but sometimes the clutch pedal is really hard, other times it is not. Probably the master cylinder needs changing also?
Was it like it before? I had one a couple of months ago where the new slave cylinder that came with a gearbox was faulty and went hard then popped, replaced it under parts warrenty again and was fine after, could just be a dodgy part...
ALL THINGS JIM no. The thing is, when I do a hard acceleration or hard brake, the clutch pedal is soft a few times, after that it hardens. Really weird. I suspect the master or slave cylinder.
Have you checked your servo vaccum line isnt damaged or disconnected?
@@ALLTHINGSJIM I am not sure. I know that I went back to the shop after the clutch change and they sucked the air out and I was pressing on the clutch at that time, but still the clutch pedal didn't become soft as I would like it to be.
I've got Mark 3 focus 1.6tdci . I have clunking noise when changing gears mainly 2nd and 3rd, 4th. Mechanic said needs new clutch and flywheel which he did. But noise still there and seems worse than before. Also changed the master cylinder as said didn't like the pedal feel. Any ideas why have clunking noise?
I posted this on the focus st forums, i replaced my master cylinder, put everything back together, checked it four times before putting battery back in and my car won’t start when pressing the clutch but does start when pressing the brakes, any clue on how or why this is happening?
Did your unplug and forget to plug the clutch pedal sensor back in?
@@ALLTHINGSJIM It’s plugged in
Ok, unplug it and if i remember right its a 2 pin plug, get a paperclip and bridge them and press start button, if it starts then your clutch switch is now faulty ( dont leave the paperclip in after this, its a test to diagnose that sensor not ment as a repair)
Or use a test lamp / multimeter if you have the knowlege to use them and see if theres voltage to the wires first before and after pressing the clutch switch
@@ALLTHINGSJIM thanks, both switches were fried just ordered them from the dealership
how many hours and labour Cost on average ? my pedal needs replacing 🙄🙄🙄🙄
Labour cost really depends on where you go and what area, in a main dealers expect to pay £100+ a hour, labour time is around 2 hours I believe 👍
I have a ford focus 2016 1l
Seriously long and fiddly process that must take alot of time. According to our local garage in Bristol, we have just had a new "slave cylinder" put in for £140. Took a non-Ford pro about two hours. Money well spent and not a ton of cash when the part is sold for about £35 to £45 incl vat. PS: The master cylinder was done 6 months earlier at a cost of around £200 - £240. Small Ford Ka mk 2 cars can give you big head-aches.
Great video,thanks for share
1 subscriber + ✓.
I could have done without the music and you could have explain shit better then wrtting it down. But thank you anyways.
This is a pig of a job. If it wasn't for the seal plate integrated into the cylinder, it would undo and come out through the bulkhead in the engine bay. Absolutely the worst design.