USB EEPROM Programmer **DRIVER DOWNLOAD LINKS**
HTML-код
- Опубликовано: 22 авг 2024
- This video show how to use a low cost EEPROM programmer. The unit used is a USB based device and is intended for series 24 and 25 EEPROM's. Below is a download link to drivers and software (since these manufacturers tend to forget to include them), as well as a list of EEPROM's supported by this programmer.
DOWNLOAD LINK
Located on GitHub
Follow the following link and click the large green button that says Code, and chose the Download ZIP option
github.com/Kri...
This link contains the CH341 files. There were no viruses or trojans tested on 09/19/2021 using:
McAfee (R) Total Protection version 16
McAfee VirusScan build 25.0.134, 8/18/21, engine version 4563, version 25.0
McAfee Anit-Spam, build 20.7.119, engine verstion 3.0.0.450, version 20.7
This short video shows how to install and use a low cost EEPROM programmer for type 24 and 25 EEPROMS (8-pin and 16-pin) using CH341A software. Shown are links to the software and drivers and installing each.
According to the website where I purchased this programmer, here are the supported chips:
1. EN25B05,EN25P05,EN25B10,EN25P10,EN25BF20,EN25P20,EN25F20,EN25B40,EN25P40,
EN25F40,EN25B80,EN25P80,EN25F80,EN25T80,EN25B16,EN25P16,EN25B32,EN25P32,EN25B64,EN25P64 SPI FLASH
AMIC:
A25L05P,A25L10P,A25L20P,A25L40P,A25L80P,A25L16P
ATMEL:
AT25DF041A,AT25DF321,AT25F004,AT25F512A,AT25F2048,AT25F4096,AT25F1024A,
AT25FS010,AT25FS040,AT26DF081A,AT26DF161A,AT26DF321,AT26F004
EON:
EN25B05,EN25P05,EN25B10,EN25P10,EN25BF20,EN25P20,EN25F20,EN25B40,
EN25P40,EN25F40,EN25B80,EN25P80,EN25F80, EN25T80,EN25B16,EN25P16,
EN25B32,EN25P32,EN25B64,EN25P64
Excel Semiconductor Inc.
ES25P10,ES25P20,ES25P40,ES25P80,ES25P16,ES25P32
ST:
M25P05A,M25P10A,M25P20,M25P40,M25P80,M25P16,M25P32,M25P64,M25PE10,
M25PE20,M25PE40,M25PE80,M25PE16,M25PE32,M45PE10,M45PE20,M45PE40,
M45PE80,M45PE16,M45PE32
MXIC:
MX25L512,MX25L1005,MX25L2005,MX25L4005,MX25L8005,MX25L1605,MX25L3205,
MX25L6405
NexFlash:
NX25P80,NX25P16,NX25P32
Chingis Technology Corporation
Pm25LV512,Pm25LV010,Pm25LV020,Pm25LV040,Pm25LV080,Pm25LV016,Pm25LV032,
Pm25LV064
Saifun Semiconductors
SA25F005,SA25F010,SA25F020,SA25F040,SA25F080,SA25F160,SA25F320,
WINBOND
W25P10,W25X10,W25Q10,W25P20,W25X20,W25Q20,W25P40,W25X40,W25Q40,W25P80,
W25X80,W25Q80,W25P16,W25X16,W25Q16,W25P32,W25X32, W25Q32,W25P64,W25X64,W25Q64
2、24CXX 24LCXX
24C01、24C02、24C04、24C08、24C16、24C32、24C64、24C128、
24C256、24C512、24C1024。
24LC01、24LC02、24LC04、24LC08、24LC16、24LC32、24LC64、
24LC128、24LC256、24LC512、24LC1024。
3、AVR
ATMEGA8 ATMEGA16 ATMEGA32 ATMEGA64 ATMEGA128 ATMEGA8515
ATMEGA8535ATMEGA48ATMEGA88 ATMEGA168
4、AT89S51 AT89S52
5、STC 3.3V and 5V :
STC89C51RC、STC89C52RC、STC89C53RC、STC89C54RD+、
STC89C55RD+、STC89C58RD+、STC89C510RD+、STC89C512RD+、
STC89C513RD+、STC89C514RD+、STC89C516RD+、STC89C58RD、
STC89C561RD
STC12C1052、STC12C2052、STC12C3052、STC12C4052、
STC12C5052、STC12C1052AD、STC12C2052AD、STC12C3052AD、
STC12C4052AD、STC12C5052AD
6、 STC11F01、STC11F02、STC11F03、STC11F04、STC11F05、
STC11F01E、STC11F02E、STC11F03E、STC11F04E、STC11F05E
STC10F02、STC10F04、STC10F06、STC10F08、STC10F010、
STC10F012
STC12C5A60S2 series
STC12C5608AD series
i would like to thank you for taking the time to share your experience. very kind of you
Glad I could help.
Thanks a million for this. Bought one of ebay and seller sent me no drivers or software so this saved me a ton of time and a very informative video
Each USB eeprom programmer apparently uses whatever orientation of the socket they like. For anyone getting a NIYOTO CH341 programmer from amazon that has no headers and only the zif and crystal on top, the orientation is the same as in this video... pin 1 closest to the zif release arm, and 24 series chips go with the notch closest to the arm. I could identify the 24 series location because pins 1-4 are all tied to ground.
Thanks so much for this Kris. I had tried for the last two days to get my programmer working. Finally got everything connected and working and have written to my first 24c08 eeprom chip. You rock!
Glad it helped!
Hi Kris, I really appreciate your taking the time to upload all the tools in one spot and explain everything. Even though you posted it over seven years ago, I was still able to get exactly what I was looking for with your help. Thanks a bunch!
Glad I could help.
@@KrisKasprzak quick question how do I burn a file to a chip with the programming software it is a Microchip 24LC64 i need help please i'm going to getting a ch341a programmer please help
'
Thank you Kris, your 341A info was priceless, I was able to save our security system after security company wanted approx 750.00 to replace board and reprogram it.
That is too funny... I used mine for the same thing. The previous owner of our house forgot the alarms pass code, and the local security company wanted to replace the whole system. $10 and a few minutes i was able to read the codes from the EEPROM. Figured i wasn't the only guy with this problem.
I wish I could say it only took me a few minutes, between the software, driver and identifying the chip, It took me more than a few hours, but excellent fun in the end.
Thanks a million for the very clear and straightforward demonstration and especially for the driver/software download links. As you pointed out, there are tons of vendors selling this item (and hundreds of video demos) but almost without exception they do not include links to the drivers and software. Some of the articles and videos say (with what I suspect is the desire to tantalize) something like "you can find the drivers online" ... which you can, but only after a lot of poking about, sifting out the bogus, etc. Thanks for a cogent and detailed demonstration.
Thank you so much. I was able to unlock a replacement radio that was vin specific. Erasing the specific eprom with the vin identifier made it work!
Thank you! Wish I found this video first, because this and the files linked actually worked! Amazing!
Really appreciate you doing this walkthrough! I bought a device-programmer somewhat similar to yours, but with a little difference in pcb-layout. The tip about orientation really helped me out! The mind boggles with these chinese things! Thank god you where creative enough to sort it out for us who have been struggling to get it to work! Manny thanks:D
Glad I could help.
Thanks so much! Your video got me working in minutes! Windows 10 driver install, tested reading/writing both w24 and w25's. Awesome!!
Glad I can help, pay it forward.
Sir, you just save my motherboard's life. Thank you so much.
Glad I could help
very professional done every word crystal clear keep up the great work
Much appreciated!
just started to venture into eeproms and thanks to your video you have saved me so much time with such a clear and precise explanation thanks
You're very welcome. Glad I could help.
Another satisfied customer. With this vid and others, I was able to un-brick an asrock a320m mother board that I was trying to update normally for a ryzen 5700g.
Glad I could help.
So am I. 😊
Thanks Kris - I was close by myself, but you helped me figure out a few things to get everything working!
Hello Kris, did you remember me? i came here again just to say thanks for you! i was able to reprogram the BIOS of P8B75M-LE and fully recover the board with this eeprom programmer and with you video guide! thank you very much! have an great weekend!
Antônio Tito Your very welcome. Glad it worked out.
Antônio Tito Hi Antonio, I'm trying to do the same thing. Did you simply flash the bios file with this programmer? or did you have to extract bios file's content first?
I have just downloaded the last bios from Asus website and open the file with the software to write on eeprom.
Antônio Tito Awesome! thanks for the quick reply! :)
+Antônio Tito Did u use the original .CAP file or convert to .BIN before program?
I just wanted to tell you thank you very much!
With the files you provide and the guidance for my first steps with this programmer achieved to unbrick my dead laptop by reprogramming the bios chip.
Thanks again!!
You've very welcome.
Kris, Thank You for the very informative video! I purchased the 341A unit to read an eeprom in a used GM Delco replacement radio. I plan to change the VIN number on the chip to match my current vehicle’s VIN to get the radio to communicate on the vehicle’s bus. The dealer wants $150 to do it with their TechII programming tool, hopefully I can do it myself and learn something useful in the process:)
Was of great help to me - thanks for this good video.
Glad it helped!
You're a gift humanity. Just reprogramed my Dj Controller using this. Thanks!
Glad I could help!
this video did the trick for me. thank you! (and i do not know why the ebay sellers do not offer any info locating the right software)
You're very welcome. Glad I could help.
Thank you so mucho, ai was searching and the most complete videotutorial with drivers included is it. Finger up and sogood edition. Thank you so muchby your dedicated work. Greetings from Argentina.
Glad I could help.
Wow,
Great help Kris. I could not have done my project without your help. Much thanks.
You've very welcome.
A note to English speaking viewers, FOLLOW THE VIDEO PLEASE!
I'm re-flashing the bios to my LattePanda 4GB/64GB eMMC SBC, and the files you supply in your download like are true and correct!:)
I haven't received my programmer, but I have the "chip clip" and paid about $8.34 for both from ebay. Following your instructions, and this is about as good of instructions as you're going to get!:)
You're very welcome.
Without these drivers I'd be stuck, thanks so much!
Happy to help
Thank you Kris for the nice video and valuable help
Glad I could help.
Very helpful video sir . Thank you very much!
Glad I could help.
Thanks for the info Kris, had a lot of grief with software full of malware. and the languages folder tip is a gift. Again thanks for your efforts.
This link (which is from my personal hightail service) should contain all the files you need.I just scanned all files before zipping and uploading and there were no viruses or trojans reported by McAfee (anti-virus Ver 16.8, anti-spam Ver 13.8)
www.hightail.com/download/UlRTcXltRStqY3JOUjhUQw
Hope this helps.
I gave this to someone else and they indicated it had all the files and was free from malware.
Brilliant, Thanks very much :)
Kris Kasprzak Hi kris the link above is no longer working can you post a new link many thanks for your efforts.
Vince Fell Here you go...
www.hightail.com/download/bXBZek9qRndGR0dLRmNUQw
Kris Kasprzak thanks kris really appreciated.
Downloaded, thanks from argentina!
Glad I could help.
last question if my bios is erased will this restore it with the software or do i have to get a file off the internet to load to the bios chip how would i go about this if i get the software and tool but the bios is arased its a gigabyte mother board socket am3 plus if that helps
@@jayt9665 creo q debes hacer una copia previa si el contenido no esta corrupto -caso contrario deberas bajarlo de internet
Thank you ! The explanations are very clear. I just followed and successfully flashed the Winbond W25Q64 !
Glad I could help.
Thanks for the video and the research, I will give this thing a try.
You're very welcome. Glad I could help.
I've seen several of these programmer devices by now, and it seems the direction that the lever faces is more or less random.. thankfully the eeprom chips aren't too sensitive if you put them in the wrong way. Thanks a lot for the download links, I've been looking for a useful r/w software for these adapters for quite some time now.
Excellent tutorial. Thanks for providing such a concise tutorial. This video was immense help for me!!!
You're very welcome. Glad I could help.
Thanks for the tutorial Kris !!!
Thank you Kris for links
Glad I could help;
THANK YOU SIR!!! Like you, I've been scouring the internet for days now trying to find the software!:) THANK YOU!
You're very welcome.
un millon de gracias sos el unico de todos los que consulte que dio el programa exacto gracias nuevamente
de nada
DOWNLOAD LINK: PLEASE READ THE VIDEO'S DESCRIPTION FOR THE LINK
That's so much :-)
+Patrick Kapuścik it's working..
+Solovyv Dmitry Нет ни у кого. Смысл покупать ее, когда проще купить другой программатор за те же деньги но с более мощным функционалом.
At 2:30 you talk about opening the 24xx25xx zip file. I don't see a link for that. Is it all in the one zip you've linked to?
I have since included all files in a single zip file and in the link in this video's description. When I created this video, the software I found was in separate files. Just unzip every thing to the same folder and follow my steps.
Thanks for sharing Kris it will help me a lot.
Glad I could help.
Thanks mate! Very interesting video, good explanation but I'm wondering whether the software in the link and the one used in this video are the same?
Yes I can read it. Bought the chip online but didn't vet it as far as compatibility with the bios and bios chip. Thanks.
Thanks for the video and download links. It helped me a lot!!! I'm new to this and it helped me read the bios and back it up (I'm using a eprom with a clip that you connect directly to the chip without desoldering it. Your video is very good. Btw, how do you translate a original bios for hp to a .bin file?
Not sure other that reading the data and writing to a bin file.
Thanks for the reply! still awesome video!!!
Excellent Tutorial on these inexpensive EEProm programmers. Thanks... ;-)
The fist eBay seller of these programmers that includes a working English link to all the files will sell tons of these.
lasersbee Totally agree--I have no idea what these sellers were thinking when posting their products for sale.
You are just GREAT! Thank you so much for this perfect tutorial and the link!
Still wondering, why the manufacturers of this devices don't offer the download link to the customer? Are they frightend about copyright issues?
You're very welcome. I too wonder why they don't post software.
In the meantime I corrected some english errors in the existing ini file, created also a german version of the language file and also a Swiss german (Bärndütsch) :-) one. Would you be interested to include those .ini-files to your download package? If yes, write me a PN...
awesome !
Thank's for the driver so mutch
+Karsten B You're very welcome
Great video Kris, makes my life a little easier. Q: in regards to skimmers, do you know if there is a way to capture the MAC data from a bluetooth Skimmer.
Great presentation Kris. I curious if it's possible to read and write to a chip that is soldered to a PCB. I have a project involving the control module in my automobile, and don't feel comfortable de-soldering the chip to reprogram it. I'm sure making jumpers would be equally challenging but less destructive. Thanks for the video, I had no idea chip programming was this easy.
Thanks for the video =)
worked in the end - the orientation would be something that you would think that possibly couldn't be broken...
Spectacular!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks! I can finally fix my bricked tablet :D
YES IT TOOK ME A LITTLE WHILE to find the like that actually work but all good..... i just hope im able to modify my klm in my car now to suit old cluster
Odd you had to look around for software, the link in my UPDATE... post should have worked.
Merci a vous pour les drivers et le soft ;)
+Axel axelannonces Vous êtes le bienvenu
Hello. Is it possible to access the storage of these chips with like a file manager? I found this chip in a handheld device and it came preloaded with games, so i thought about adding some games. The games seem to be installed on the IC chip.
Also, don't forget to go ahead! It is vitally important to go ahead and go ahead! If you do go ahead to not go ahead, or if you don't go ahead to go ahead, go ahead and go ahead later. But don't go ahead and don't not go not ahead, or your head will explode.
Anvilshock what?
Don't say "go ahead" so often, dumbass.
Thanks for the video! I wonder if I can use it to reset/reprogram a toner chip, my xerox phaser 6125 doesn't accept recharged cartridges and the original replacements are very expensive in Brazil. For its case i'd have to build a cable for connecting it to the board, thats not a problem but how to wire it to the board is.
thanks brother u are really helpful
Thank you for making life easier...:-)
Thank you from Thailand
kap kun kap
thank soo much
You're welcome!
Just for others who faced the same problem as I did: My Operating system is Windows 7 64 bit. On Unzipping the zip file and then running Setup.exe I got the Error Message "Not found install application, please install by hand!"
Edit: To do this, simply run the program drvsetup64.exe. Hope that helps!
Thank you so much Kris Kasprzak for uploading the zipped folder in GoogleDrive and for this video. They are a godsend!
Also, watch ruclips.net/video/5NYe21nFSDI/видео.html which gives advice on setting the Program's language from Chinese to English as well as on positioning the EEPROM chip in the zif socket.
Great tip!
Thank you very much!!!
I got thia programmer but can't write the spi flash roms read but cant write I see wite operation timeout failed
Thanks, you saved me
You're very welcome.
Thanks for the awesome tutorial Kris... good job, alot of people need this ...
I wanna ask you something... I try to Update the BIOS on my Aspire 6930G but it fails, what do you recommend ? Getting a new Mobo or trying to re-program the BIOS Chip ? Also can u help me identifying the BIOS chip on my MB which is Model DA0ZK2MB6E0 ?
I don't know where is the BIOS Chip located in this MB to have it removed..
An answer will be highly appreciated !
+yonutfilip After corrupting my chip
whilst updating I just bought a new bios chip and fitted it for £ 8.00. (myworld.ebay.co.uk/bios-master)
I used a set of long nose pliers to
remove it and replace (There is a special tool you can purchase at low cost), Just
make sure that the orientation is correct and the dimple is facing the same way
as your original chip You need the mother board model for ordering which can be
found on the mother board or the box it came in. example ASUS M5A78L LE The chip itself is usually close to the clear
cmos jumper with the Asus board and has 4 pins on either side but can check
with the boards manual
very good
Glad I could help
Brilliant.. Thank you :)
very good tutorial thanks
Glad I could help
Thanks
No worries
Kris, thanks so much for the awesome video. I've got the driver set up and my device is working well. I am having a lot of trouble getting the device to read my chip contents, though. Would you be willing to help me trouble shoot a little bit? It's really tough to find resources online. I'm a bit of a newbie.
What chip you trying to read?
Personal hero :D Thanks a lot!
Glad I could help.
+Kris Kasprzak There is just one thing I don't get... I connected everything successfully, but I seems as if the device does not write the chip (Winbond W25Q32BV)... the write process finishes without any error, but the verify discovers that nothing in the chip has changed... but it reads the chip successfully. any suggestions?
+Kris Kasprzak There is just one thing I don't get... I connected everything successfully, but I seems as if the device does not write the chip (Winbond W25Q32BV)... the write process finishes without any error, but the verify discovers that nothing in the chip has changed... but it reads the chip successfully. any suggestions?
+Nikolai Klipp got it. Needed to erase the chip first... :)
+Nikolai Klipp hi! did you click "erase" button or use another way to do that?
hello , very clear video , thanks for thet ! now can you help me and say if a 24CS01 eeprom can be read and written with this CH341A ?
i can't find the difference between 24C01 and 24CS01 ... only a TL866CS seems to be able to read these 24CS01, i want check before order !
thanks for your help .
Based on the types reported by the company that makes this programmer,It doesn't appear that this programmer will work with a 24CS01.
That can read this chip? 24lc128
Gracias por el software y la información.
Thank you very much Kris for this great tutorial! I can't get the drivers to work. I install them, but the software says "device not connected." any suggestions? The chip is supported and installed correctly :(
I've had this in the past, sounds odd, but uninstall, reinstall, uninstall and reinstall. That usually worked for me.
I'll do that. Thank you so much!@@KrisKasprzak
Thanks you very much
So if I have a chip that is not listed, can I use another software program or am I doomed to not be able to read/write to this chip? I'm looking to read several TV eeprom chips, but haven't been able to get one to work yet :(
I need the file for an ACer Iconia w3-810(winbond 25x40clnig) where can i get it? I have the bios update file
thanks ,it very easy to use but language was not changing can you give me any other suggestion
thankyou!!
You're welcome!
Thanks!
This programmer is for series 24 and 25 so it should work but I don't see it listed as one it will program.
Hi Kris, thank you for your effort. I need a favor from you. I am using a SPI FLASH device to power my board. I have a Verilog model of the SPI to hold the image in ascii format. How do I translate this file to programmer's hex or bin file format?
I'm not sure
good brother, tanks!
+Like ...+....
Any help with how to use this software to do a byte swap function? I'm new to all of the eeprom burning unfortunately...
Hi Kris Thanks
my machine display don't show any thing and their user light is green i think its bios system is out of order. in this machine use one cmos ic and EEPROM 24lc16b . my question is if i replace and reprogramme 24lc16b then possible to remove the problem
I have a 16 pin ADC EEPROM I dont think this software or hardware doesnt communicate with them correct? I believe i will have to buy a universal programmer
sorry, i just bought this tool, but i installed can not, no driver reaction in laptop, can help me me from indonesia and i am message from hongkong, thanks
try to uninstall the drivers, then reinstall. On one machine I had to do this a few times before the OS would recognize the EEPROM programmer.
nice.
thanks
Thanks"!
Maybe someone or the video producer knows how i can use the pins directly on pcb of these eeprom reader ch341 next to the green box directly on the pcb.
question if my bios is erased will this restore it with the
software or do i have to get a file off the internet to load to the bios
chip how would i go about this if i get the software and tool but the
bios is arased its a gigabyte mother board socket am3 plus if that
helps
Hey, do you know if this ch341a would work with a chip MX25L6473E?? This chip is not listed into the software but there are other ones very similar. My motherboard has 2 of those MX25L6473E as bios chips and im trying to flash them as it is not functional right now due to a bios fault!! I'd appreciate any help :)
+Gaming isnotacrime Sorry, i don't know. If it;s not in the MFG list, probably not, but then again, this thing was only $10, may be worth the risk.
Hi Kris, I am looking for a software to program Atmel AT28HC256-90lm/883, do you have any idea?
Hi, can u put download links as this from the gdrive alow me to download me only ch34a.zip Cannot get nothing else just this one...
The only links i have are listed in the video--you will have to type them into your browser. I doubt those links are still good anyway. can you not get the the download link I provided?
Thanks for the video, quick question, can it flash Pm25LD010? from the description it says it can flash Pm25LV010, looking at the datasheets, both ICs seem to have same pinouts, but the LV programs at a slower rate. Any ideas? Again thanks for the nice video.
I"m not familiar with that EEPROM, sorry.
Wow, the fact that you put the effort to respond to comments for an old video is impressive. just for that im subscribing and checking out the rest of your videos!!
It looks like the software supports chips up to 64MB in size. Their chip finder feature shows the chip I need (a 128MB Winbond), but it won't select it, and I can't seem to get any other 128MB chip selected. Is there a solution for this?
Thank you very much for the video, I have my lenovo T500 which does not start anymore as before and remains blocked on
the first start page setup, I tried everything to get it to work with no success.
Now I want to flash the eeprom P24s08 memory because it is blocked, but I cannot find the bios
factory other than that offered by Lenovo support.
Can you help me get this copy from another T500 if possible or direct me to a site ....
Thank you in advance.