Glad to see the 5.7 getting some love! Guessing a whole lot of us would like to see more on boosting one. What's a safe hp level? What should you gap the rings to? That sorta stuff
@@chrishansen7004 thats pretty true. If you want to hold a lot of boost go with a 6.0 or 6.2. If you want to hold an even higher amount of boost to go with an iron block. At that point you'll be pumping out so much power the extra weight won't matter. Remember guys, the iron block variant is only 100 lb more.
Great job on the playlist man. So so many RUclipsrs, in fact most of them forget to maintain them later on. Or they never properly set it up in the first place. PLEASE stay on top of that playlist it will further set you apart. Seriously set you apart in fact, lol and it’s so sad that thats true too.
That's funny, because maintaining playlists is easy. Just assign each video to the appropriate playlist when you upload it. It's just a couple clicks. But if you don't do that, and wait to sort them out later, that's a hassle.
I think he's just sick of people asking for stuff he's already done lol. The chats are filled with people asking questions about things they could already find in his previous videos.
Excellent episode. Thanks for doing this one. I’m an Aussie and I’m going Turbo LS1 your testing is guiding me hopefully in the right direction. Thanks Richard. Support from South Australia 🇦🇺
I mean basically everything he does on the 4.8 and the 5.3 and 6.0 are the same you just might not be able to make as much as an iron block but probably way more than you need
Years ago, I said I wasn't going to modify my Camaro's LS1 until it blew. Problem was: IT NEVER BLEW! Still running good at 282k miles after 15 years of track days.
@@andyharman3022 Thanks for that Man ! I'm all worried about my 130,000 mile LS 1 after doing cam (.600 lift 224 224 duration) Dorman intake , 42lb. injectors , 62cc CNC heads , still have 6,000 rpm redline . Sounds like I got a few miles left , is yours modified ?
Hi, I have a 99 SS.I why with a costume cam built to the mods that was already done to my car. Lt ls6 intake under drive pulley ported tb ssra ram air. The cam is a 227/235/565/579 110 LSA,M6 car stock gears and I run low 12s on crappy tires. I'm sure it'll run 12 flat, but you know how weak those rear end are, so I'm happy with those times.
Bored a cast iron boat anchor 5.3 to LS1 spec for sh*ts n giggles. We'll see how it all pans out. Nice to see a LS1 video. So much great information in all your videos. Thank you.
@@SOLightt all of the above. Ewp , roller rockers, crank scraper, short belt with ps bypass on that dyno. Tested that just to see how much these newer car get from electric power steering, ....the little things add up. That was on pump gas. E86 will add 10whp and a pile of tq.
An LS6 is literally 243, heads, intake, slightly larger cam. You aren't making 450 with an LS6 intake, stock 243s and the largest cam ever made that will physically operate.
@@carado1984 why you use a ls6 intake? A ported fast with make 14whp more than a ported ls6 intake. A bolt on ls6 can actually make more than i did. I wasn't using e85. You can add 10-15whp and tq using e85. Btw...the biggest cam ever would make more than the stock ls6 cam i used.
Richard Ebay has a new turbo it's a 78. 76. T4. Billet wheel. Stated to make up to 1000 hp. They are 280 bucks. Everybody better get a couple before this gets out. Be great if you could test them as a single and twins. Great job.
6.0s grouped together with 6.2s, lsa's and crate motors or blocks from the US here are about as common as 5.7s now. A few year ago that would have been different.
All of this info was available in the late 90s and early 2000s. Budget combo? Ported 243/799 heads, LS6 intake, throttle body, cam, headers, injectors, tune...let it eat.
LS1 today? How about an L33 block bored to 3.900 or so, then add the components of your choice. Of course if you’re adding boost (a lot of boost), then don’t bore it, just turn up the boost controller. That first head upgrade example seemed extreme. A 212° intake cam making 529 hp at 6500? I’m hoping my 6.0 cracks 500 hp at the crank with a 225° intake lobe and 823 heads. Of course part of the difference is the 9.6 or so compression of the LY6. Still interesting info, thanks Richard!
Would love to see the stock intake numbers for the LS1 (I know its in another video but would like it here for a baseline)and then a comparison to the 90s LT4 that it replaced.
I have a 98 Camaro w/ an LS1 in it.. I have Headers, Y-pipe, (cats removed) & SLP Cat Back Exhaust.. K&N Cold Air intake.. I had it dyno tuned, but my HP to the rear wheels was 310HP..
Not bad numbers considering... Considering the LS1 that's in 98 camaros Is a little bit Of difference which most people don't know ... Like the 241 heads that came on the Camaro are not the 241 heads that came on the 2004 GTO LS1 The LS1 block was revised and the 241 LS1 heads were revised also.... The LS1 in the GTO was a factory rotating LS6 assembly Block ..It had an LS6 factory intake..also but had 241 heads but revised... Don't know if this part's a fact or not but I also Have heard.. Don't know if it's true but I heard that the 04 GTO factory Cam Had its own grind Slightly better
Well if you get enough guys together you can all split the cost of getting a shipping container full of junkyard 5.3ls and shipping them over there! (Maybe with some 4.8s, 6.0s, and a few texas speed 427s mixed in...)
@@Prestiged_peck Send some iron blocks to the UK while you are at it too. We have very few LS* of any variety and prices are sky high. (People asking £2k+ /$3k for an LM7.)
Get a straight-up round trip with 5.3 and 6.0 LS to Oz in a 40 foot container, and send em back to the States filled with Barras. EVERYONE happy with that trade!
it would nice to see you do a cylinder head comparison from the cheap Chinese stuff to the name brand stuff i hear mixed reviews about the cheap Chinese stuff
The LS1 I'm currently swapping into my jeep I grabbed from a wrecked F-Body at the Monrovia PYP, If I had known you wanted to test with an LS1 I would have gladly loaned it to you. It currently has 799 heads, with a BTR stage 4 cam kit.
If you make these kinds of mods and get these ~500hp numbers with a sensible tune - is it a reliable build? Or is it going to be in the shop all the time?
I would choose the truck intake with a heavy truck or SUV for added low end torque say something with the weight around 4500-5500 pounds with the 212/218 duration comp cam giving you good torque 2000-5500rpm and strong horsepower 3000-6200rpm with stock to 2500rpm stall converter 3.42-3.73 gearing but if you have a car with a weight under 3600 pounds or less with low gearing 4.10 and a 3000-4000rpm stall converter it be hard not to choose the edelbrock intake comp cam 231/239 duration cam power from 4000rpm to 7200rpm with this set should be a monster even a single plane intake with a holley 850 hp carberator would be ok for me
Richard , any "guestimate" what adding 1 point (say about 11:25-11:1) of compression would do to the engine with the cam , intake , heads & proper tune ? Thanks for all the cool stuff you do !
Hey Rich, I’ve seen all these different V8s... I’m still waiting for you to do a 1UZ series. NA, ITBS, giggle juice, and all sorts of FI. SC, single Turbo, and twin. Looking forward to it
500 hp on any LS Vortec with just bolt ons ? Why would anyone rebuild a sbc or bbc when junk yard LS Vortec exist ? Power, reliability, efficiency & huge aftermarket parts support.
@@diduck6878 to me the rebel flag stands for the south and isn't really anything to do with the Civil War. When I see a rebel flag I think south...not civil war and slavery but that isn't how most others see it. The south had that flag during the Civil War which was about slavery but to me the flag represents the south not so much that other stuff.
I don't understand how you get so much dyno time? do you work for westech, partners are you the owner? ****** ( I mean what is your relationship with westech performance group). could you make a video about this topic? just curious
Go on Google and search for any engine dyno article from a major car magazine done in the last 15 years, then look at who the author is. A lot of the videos like this one are Richard reframing/recontextualizing tests that he did for magazines in years past.
I did not see anything about the port volume or flow figures on the 1st design? RHS cylinder heads or the compression ration after the cylinder head swap. I just assumed due to the era they were cathedral ports?
New to gm been big on Ford only 21 but I have 862 heads on my 5.7 fbody camaro it was a police interceptor that being said roughly how much hp would it make? Never took it in it see what it makes it’s my daily with 112k
what kinds of RPMs can a stock LS1 bottom end handle? i'm getting one ready for a Autocross car and often times we will bounce off the revve limiter for 2-3 seconds during our runs. i also plan on using a Torqy Comp 265Hr cam as well as mid-range power is very important for Autocross cars
@@richardholdener1727 realistically with my gearing, it would only need to revve to 6500prm. but most of the course would be between 3500rpm-5000rpm. or would a bigger cam be worth it?
I commented and posted a link to my freshly rebuilt ls1 idling. For some reason it got deleted? I built that motor because of your videos and seeing the power potential of my engine.
The trade off is worth it if you're most interested in road racing and high rpm power for drag racing. I think its interesting to see cam only cars running 11s with a good suspension and converter, and ET is very similar w/ properly tuned stg 1.5-2 (22X duration) or a 23X/24X. So the peak power isnt nearly as important as the avg tq/hp in your launch to shift (racing) rpm range. I was going to increase from a 235/242 112lsa, mainly for more overlap(tighter lsa) and to get up to .650ish lift, but I'll be fabbing hot/cold side, adding a turbo from VSR or Sloppy, and then I'll prob want less cam in the 383.
@@richardholdener1727 Its a 383 LT1, so the JE pistons are relieved and I know people run much bigger stuff. Mines been together for years, I wanted to take my stock pcm to its 7k limit with a cam change but decided I'll just do it with one of VSRs bigger turbos.. I'm saving for the hot side(no bolt on LT fbody parts), black magic clutch to replace my twin disc, and faceplating/building my trans for the power.
I was wondering what would happen if you ran a single turbo on an ls without a y pipe? One bank of cylinders goes to the exhaust as normal and one bank powers a turbo.
Richard, what engine would you rather build and race. A Built sbf 347 or ls1? There’s a big argument and I’d like to know since I’ve watched all your videos on them
I picked up an ls1 for cheap. Had 4 bad rod bearings and the crank was damaged. Can I use a 5.3 crank and rods and have it balanced with new pistons? Thanks
Looking to get approximately 350 to 400 hp , but on a budget . I have a 5.7 and a 4.8 . Both vortecs and want power . It's going in 03 siverado 4 door 4x4. Any ideas what you would do starting out for around $1000 then go from there.
@@richardholdener1727 I have a 1979 trans am with a gto 5.7ls1/4l60e stock intake,stock injectors, 243 heads, 2.5” exhaust 3.08-3.23 gears (can’t tell) stock torque converter. Looking for a nice thump cam that I don’t have to change out the converter and valve train. It’s going to be daily driver/cars and coffee type of car I’m building for my dad. I’ve been looking at the 228/232 and the btr red hot cam, and the gm performance hot cam
How are you Richard? hope all is Great. I am building a 5.7 now. I was looking for Rhs heads but I can’t find them. Is 243 heads a strong head? I am putting a car heads and intake
Hi Richard I enjoy all your videos , I have one Camaro 2002 with ls1 do you think ls1 is good idea for a single turbo or it is better a 5.3 ?, regards from mexico
See out American vans have 6.0 and 4.8s. My own personal truck is powered by an 07 express van lq4. That said don't the aussies have rb30's in the wreckers?
So in the USA this motor came in the camaros and the firebirds, the corvette, the impala got a v8 at some point in the last 20 years, as did the cobalt, and then we've got the northstar cadillacs, not to mention all the Lincolns that came with ford v8s, or the literal millions of crown Victoria's/grand marqs/town cars. I don't think you can get more normal than an impala or a crown vic.
Genuine question... watched plenty of vids on LS’s, and would love your input. I’m currently on a 1JZGTE/ AR5 setup, and looking to get rid of it all and swap to an LS setup. Car: Built 240sx S13 I’m aiming for AutoX, Ima blow all my big bucks on a T56 Mag and twin disk setup, but on a budget for an LS setup pushing maybe 450whp, what would you recommend? Wanting to keep weight down so preferably an Aluminum setup. Genuinely curious.
@@richardholdener1727 Thanks for the reply, been looking around at 6.0L Aluminum block. Doesn’t matter to much to me at what it is, I was even looking at 5.7Ls and thinking about Cam, Porting the heads, and an intake. Been looking at like LFA blocks as well, and doing DoD delete and minor mods as well. Not as common around here to find these though.
No probably not. GM saw fit to move away from cathedral ports for a reason. LS3 rectangular ports are "copies" of bbc heads which out flow, make more power through out the power band & vast efficiency.
rec port ls heads are not copies of BBC heads-the 706 head add some low speed torque, but be way down on power compared to ls3 heads (I tested that on an LY6)
USA guys like the 5.7 to. Love seeing these. You have helped a lot of people. Thank you
Okay but he's simply saying it is literally the exact same just a change in displacement.
Glad to see the 5.7 getting some love! Guessing a whole lot of us would like to see more on boosting one. What's a safe hp level? What should you gap the rings to? That sorta stuff
I remember seeing some article or something saying that the ls1 isn't that good to boost because the piston walls are thin but what do I know
Word around is that the ls1 Lower can hold up to 500 wheel
@@chrishansen7004 thats pretty true. If you want to hold a lot of boost go with a 6.0 or 6.2. If you want to hold an even higher amount of boost to go with an iron block. At that point you'll be pumping out so much power the extra weight won't matter. Remember guys, the iron block variant is only 100 lb more.
@sethh8892 so true, just chuck a few extra psi into it to compensate the extra weight. Won't take much at all
I'm always impressed by the factory truck intake when compared to these $600+ intakes
Yeah that nnbs/tbss truck intake is hard to beat
Thank you very much where's the best place to order from
@@terryhouse1533 get them from your local junkyard
Should I use trick flow heads or something else
@@terryhouse1533 what size of engine and what are your goals? Power adders?
Great job on the playlist man. So so many RUclipsrs, in fact most of them forget to maintain them later on. Or they never properly set it up in the first place. PLEASE stay on top of that playlist it will further set you apart. Seriously set you apart in fact, lol and it’s so sad that thats true too.
That's funny, because maintaining playlists is easy. Just assign each video to the appropriate playlist when you upload it. It's just a couple clicks. But if you don't do that, and wait to sort them out later, that's a hassle.
I think he's just sick of people asking for stuff he's already done lol. The chats are filled with people asking questions about things they could already find in his previous videos.
Good point. I noticed he does get a lot of repeat questions. Answering the same question over and over must get old after awhile.
P
Excellent episode. Thanks for doing this one. I’m an Aussie and I’m going Turbo LS1 your testing is guiding me hopefully in the right direction. Thanks Richard. Support from South Australia 🇦🇺
Best of luck!
I watch every new video of yours while I eat my lunch, every single day. I can’t get enough of them!
I have been waiting on this!! My gto is needing more power and I’m not doing an engine swap till my LS1 blows.
I mean basically everything he does on the 4.8 and the 5.3 and 6.0 are the same you just might not be able to make as much as an iron block but probably way more than you need
Same !
Years ago, I said I wasn't going to modify my Camaro's LS1 until it blew. Problem was: IT NEVER BLEW! Still running good at 282k miles after 15 years of track days.
@@andyharman3022 well I’m already at 107k miles and it can get it to last 15 years that gives me time for my real goal of TSP 427s like Cleetus uses
@@andyharman3022 Thanks for that Man ! I'm all worried about my 130,000 mile LS 1 after doing cam (.600 lift 224 224 duration) Dorman intake , 42lb. injectors , 62cc CNC heads , still have 6,000 rpm redline . Sounds like I got a few miles left , is yours modified ?
YES! My 99 SS will get some love now!
Worth putting some effort into the old LS1 Holden's now hey
Hi, I have a 99 SS.I why with a costume cam built to the mods that was already done to my car. Lt ls6 intake under drive pulley ported tb ssra ram air. The cam is a 227/235/565/579 110 LSA,M6 car stock gears and I run low 12s on crappy tires. I'm sure it'll run 12 flat, but you know how weak those rear end are, so I'm happy with those times.
Oh dyno,430/450. That part is hard to believe but the car haul's a__
🤘🏼 Straya says. Cheers mate 🤘🏼
Bored a cast iron boat anchor 5.3 to LS1 spec for sh*ts n giggles. We'll see how it all pans out. Nice to see a LS1 video. So much great information in all your videos. Thank you.
Probably very well
westech has an iron ls1
Can't wait to see the ls6 content. My bolt on 2002 ls6 made 451whp/423wtq on pump gas.
What mod do you have? Cooler thermostat, headers and better intake?
@@SOLightt all of the above. Ewp , roller rockers, crank scraper, short belt with ps bypass on that dyno. Tested that just to see how much these newer car get from electric power steering, ....the little things add up.
That was on pump gas. E86 will add 10whp and a pile of tq.
An LS6 is literally 243, heads, intake, slightly larger cam. You aren't making 450 with an LS6 intake, stock 243s and the largest cam ever made that will physically operate.
@@carado1984 why you use a ls6 intake? A ported fast with make 14whp more than a ported ls6 intake.
A bolt on ls6 can actually make more than i did. I wasn't using e85. You can add 10-15whp and tq using e85.
Btw...the biggest cam ever would make more than the stock ls6 cam i used.
Richard Ebay has a new turbo it's a 78. 76. T4. Billet wheel. Stated to make up to 1000 hp. They are 280 bucks. Everybody better get a couple before this gets out. Be great if you could test them as a single and twins. Great job.
Are ebay turbos any decent in terms of reliability compared to the known manufacturers?
Aussie here. Thank you, Sir ✊
5.7's & 6.0's here are the most common, 6.2's are like Rocking Horse Poo!
6.0s grouped together with 6.2s, lsa's and crate motors or blocks from the US here are about as common as 5.7s now. A few year ago that would have been different.
I also have been waiting on this 😎 you are the man I have 04 gto ls1
Me to ..2004 gto ls1 t56 car
All of this info was available in the late 90s and early 2000s. Budget combo? Ported 243/799 heads, LS6 intake, throttle body, cam, headers, injectors, tune...let it eat.
I'm glad to see a set of RHS heads on the dyno...I'm about to put some on a 6.0 with a BTR Stage 3 cam & a 4.000" stroke 😉
Should've gone rectangle port on a 6.0 and saves some money with LS3 heads.
@carado1984 I never bought after researching & seeing how much power you can make with stock heads
LS1 today? How about an L33 block bored to 3.900 or so, then add the components of your choice. Of course if you’re adding boost (a lot of boost), then don’t bore it, just turn up the boost controller. That first head upgrade example seemed extreme. A 212° intake cam making 529 hp at 6500? I’m hoping my 6.0 cracks 500 hp at the crank with a 225° intake lobe and 823 heads. Of course part of the difference is the 9.6 or so compression of the LY6. Still interesting info, thanks Richard!
Yeah yeah nar yeah cheers fella us Aussies love our LS1s
Would love to see the stock intake numbers for the LS1 (I know its in another video but would like it here for a baseline)and then a comparison to the 90s LT4 that it replaced.
Been waiting for this one, thanks Richard!
I have a 98 Camaro w/ an LS1 in it.. I have Headers, Y-pipe, (cats removed) & SLP Cat Back Exhaust.. K&N Cold Air intake.. I had it dyno tuned, but my HP to the rear wheels was 310HP..
Not bad numbers considering... Considering the LS1 that's in 98 camaros Is a little bit Of difference which most people don't know ... Like the 241 heads that came on the Camaro are not the 241 heads that came on the 2004 GTO LS1 The LS1 block was revised and the 241 LS1 heads were revised also.... The LS1 in the GTO was a factory rotating LS6 assembly Block ..It had an LS6 factory intake..also but had 241 heads but revised... Don't know if this part's a fact or not but I also Have heard.. Don't know if it's true but I heard that the 04 GTO factory Cam Had its own grind Slightly better
Been waiting on this to drop, Thanks Alot.
If I remember correctly, here is the USA, f body ls1 enginges started coming from the factory with the ls6 intake in mid to late 2000.
My 2002 Camaro has an LS6 intake. On the chassis dyno it put down 305 to the wheels when it had 60k miles on it.
Here in OZ we have the opposite problem, all the ls1's but no iron blocks that make a millionity hp lol
Well if you get enough guys together you can all split the cost of getting a shipping container full of junkyard 5.3ls and shipping them over there! (Maybe with some 4.8s, 6.0s, and a few texas speed 427s mixed in...)
I'm sure the people in the states wouldn't mind a trade
Our LS1 stocks are Disapearing . afew years ago a Ls1 was from 500-1000AUD . people asking Over2k for a runner nowadays .
@@Prestiged_peck Send some iron blocks to the UK while you are at it too. We have very few LS* of any variety and prices are sky high. (People asking £2k+ /$3k for an LM7.)
Get a straight-up round trip with 5.3 and 6.0 LS to Oz in a 40 foot container, and send em back to the States filled with Barras.
EVERYONE happy with that trade!
Just picked up a low mileage LS1 and have been curious about what it's potential is, thanks!
it would nice to see you do a cylinder head comparison from the cheap Chinese stuff to the name brand stuff i hear mixed reviews about the cheap Chinese stuff
You answered your own question “the cheap Chinese heads” are trash
The LS1 I'm currently swapping into my jeep I grabbed from a wrecked F-Body at the Monrovia PYP, If I had known you wanted to test with an LS1 I would have gladly loaned it to you. It currently has 799 heads, with a BTR stage 4 cam kit.
Stock 799 heads ? Curios what numbers you’re making that’s a big ol cam for a jeep ! And awesome find at a PYP!
Just got myself a 40k-mile LS1 (snuggled inside a 2001 SS Camaro) & I already love it.. but there's always room for *more* love. haha.
Treat it nice, and it will run a long, long time. Mine has 289,000 miles on it.
I'm trying to get my car registered with a c5 engine before i increase the power, I'm glad there is still a lot of power to be had out of the 5.7
I would love to have a asmr of high revving engines back to back with descriptions of what brand in the dyno
ASMR?
I'm building a 5.7 out of a 4.8 since I have several 4.8's I figured why not.
As always , another great Video from Holdener
LS1. Where it all started.
If you make these kinds of mods and get these ~500hp numbers with a sensible tune - is it a reliable build? Or is it going to be in the shop all the time?
love this.....one day ill build my 2002 LS !!
Thanks for the video I needed to see this !
I would choose the truck intake with a heavy truck or SUV for added low end torque say something with the weight around 4500-5500 pounds with the 212/218 duration comp cam giving you good torque 2000-5500rpm and strong horsepower 3000-6200rpm with stock to 2500rpm stall converter 3.42-3.73 gearing but if you have a car with a weight under 3600 pounds or less with low gearing 4.10 and a 3000-4000rpm stall converter it be hard not to choose the edelbrock intake comp cam 231/239 duration cam power from 4000rpm to 7200rpm with this set should be a monster even a single plane intake with a holley 850 hp carberator would be ok for me
Richard , any "guestimate" what adding 1 point (say about 11:25-11:1) of compression would do to the engine with the cam , intake , heads & proper tune ? Thanks for all the cool stuff you do !
It's 3-4 % gain per point of compression. Google my friend.
Hey Rich, I’ve seen all these different V8s... I’m still waiting for you to do a 1UZ series. NA, ITBS, giggle juice, and all sorts of FI. SC, single Turbo, and twin. Looking forward to it
like always you are great with the ideas and amazing explanations, thank you,God bless.
How about the original VORTEC 5.7 L 31 ??? PLEASE ?? stock injection..... , Cam, BOOST... PLEASE??
Where can I get a set of LS1 RHS heads. RHS doesn't supply them any more...
the early ones were done by Mast
@@richardholdener1727 Jesus Crisco! They're $1500 for a single head. $3k for cylinder heads damn is there a cheaper option?
@@ryryy1980this is why people swap in 6.0s and use LS3 heads and intake.
500 hp on any LS Vortec with just bolt ons ? Why would anyone rebuild
a sbc or bbc when junk yard LS Vortec exist ? Power, reliability, efficiency & huge aftermarket
parts support.
Some people don't like change. We have people flying a flag 157 year's after a war was lost 😉👍
@@diduck6878 to me the rebel flag stands for the south and isn't really anything to do with the Civil War. When I see a rebel flag I think south...not civil war and slavery but that isn't how most others see it. The south had that flag during the Civil War which was about slavery but to me the flag represents the south not so much that other stuff.
What would you recommend for me to help my performance on my 1998 Chevy Silverado C1500 5.7 v8 all i done to it was put a cold air intake in it
I don't understand how you get so much dyno time? do you work for westech, partners are you the owner? ****** ( I mean what is your relationship with westech performance group). could you make a video about this topic? just curious
Go on Google and search for any engine dyno article from a major car magazine done in the last 15 years, then look at who the author is. A lot of the videos like this one are Richard reframing/recontextualizing tests that he did for magazines in years past.
@@brandoncharley3070 thank you
Finally but I'm not from Australia🤗
WORKS THE SAME ON EVERY CONTINENT
@@richardholdener1727 IT DOES? You just blew my mind lol. I have an ls1 so I'm just happy to see some ls1 numbers.
Hold up, I thought the cam spun backwards in Australia?!?!
Thanks Richard 😊
I did not see anything about the port volume or flow figures on the 1st design? RHS cylinder heads or the compression ration after the cylinder head swap. I just assumed due to the era they were cathedral ports?
CATH PORTS ON THE LS1
A recipe where it focuses a ton of lowend torque with 93 octane or 95 Octane
Please
New to gm been big on Ford only 21 but I have 862 heads on my 5.7 fbody camaro it was a police interceptor that being said roughly how much hp would it make? Never took it in it see what it makes it’s my daily with 112k
Can you do a video on taking a gen 3 5.3 block bored over to a 5.7 an do Dyno run on them.
I have one of those
Best channel ever!
what kinds of RPMs can a stock LS1 bottom end handle?
i'm getting one ready for a Autocross car and often times we will bounce off the revve limiter for 2-3 seconds during our runs.
i also plan on using a Torqy Comp 265Hr cam as well as mid-range power is very important for Autocross cars
you won't make power at high rpm with that cam
@@richardholdener1727 realistically with my gearing, it would only need to revve to 6500prm. but most of the course would be between 3500rpm-5000rpm.
or would a bigger cam be worth it?
Australia.... Yeah boi!
I commented and posted a link to my freshly rebuilt ls1 idling. For some reason it got deleted?
I built that motor because of your videos and seeing the power potential of my engine.
deleted from where?
From the comment section
Great video!! Can you please do an updated best HCI for the 5.7? 🤞🤘
what do you mean by "BEST"
@@richardholdener1727 I guess the best HCI combo HP/Cost?
3000-6000rpm range. More of a daily driver beast. 😁
@@MARKC0R3 how much do you want to spend?
The trade off is worth it if you're most interested in road racing and high rpm power for drag racing. I think its interesting to see cam only cars running 11s with a good suspension and converter, and ET is very similar w/ properly tuned stg 1.5-2 (22X duration) or a 23X/24X. So the peak power isnt nearly as important as the avg tq/hp in your launch to shift (racing) rpm range. I was going to increase from a 235/242 112lsa, mainly for more overlap(tighter lsa) and to get up to .650ish lift, but I'll be fabbing hot/cold side, adding a turbo from VSR or Sloppy, and then I'll prob want less cam in the 383.
check p-v with a 235 cam
@@richardholdener1727 Its a 383 LT1, so the JE pistons are relieved and I know people run much bigger stuff. Mines been together for years, I wanted to take my stock pcm to its 7k limit with a cam change but decided I'll just do it with one of VSRs bigger turbos.. I'm saving for the hot side(no bolt on LT fbody parts), black magic clutch to replace my twin disc, and faceplating/building my trans for the power.
Hey my man love the content truly I do but what do you think of the L76 6.0L v8 in a g8 gt and what are some cheap cams to boost the power
L76 = good
I was wondering what would happen if you ran a single turbo on an ls without a y pipe? One bank of cylinders goes to the exhaust as normal and one bank powers a turbo.
yes on a bbc
Do the heads and cam upgrade on the Gen 2 LT1
When boosted are these comparable to the gen 3 5.3s for strength? I get the blocks themselves are not AS strong.
Rods and pistons don’t seem to be as stout. Most people usually don’t push past the ~600whp mark especially with stock ring gap
Richard, what engine would you rather build and race. A Built sbf 347 or ls1? There’s a big argument and I’d like to know since I’ve watched all your videos on them
If I was forced to use a stock 5.0L block, then some type of iron ls based motor (or alum 5.3l)
Thanks for everything richard rs
The OG hell yeah
Can u put a pic of this truck intake where can I get one in oz
THE fast?
I'd love to see an other guys for the v6 sho. 3.0 or 3.2.
What’s size rhs heads where these?
What size n brand was the tb on the eldelbrock
I picked up an ls1 for cheap. Had 4 bad rod bearings and the crank was damaged. Can I use a 5.3 crank and rods and have it balanced with new pistons? Thanks
YES
@@richardholdener1727 thanks that means a ton to me.
2003 5.7 liter big power upgrades on budget, any ideas and approximately the price if items and brand names
every mod for any ls motor works on the 5.7L (not rec-port heads)
Looking to get approximately 350 to 400 hp , but on a budget . I have a 5.7 and a 4.8 . Both vortecs and want power . It's going in 03 siverado 4 door 4x4. Any ideas what you would do starting out for around $1000 then go from there.
How much does all this cost???
what?! you didn't try the best LS heads (706) on the LS1?
I’v been wanting to see this combination for a year now i wanna know the powerband ls1 with those 706 heads
No BOOST???
So what’s a good modern cam for the ls1?
I have 2 of them avail-Low Buck Truck adds 65 hp and Truck plus adds 81 hp ($179 each shipped)
@@richardholdener1727 I have a 1979 trans am with a gto 5.7ls1/4l60e stock intake,stock injectors, 243 heads, 2.5” exhaust 3.08-3.23 gears (can’t tell) stock torque converter. Looking for a nice thump cam that I don’t have to change out the converter and valve train. It’s going to be daily driver/cars and coffee type of car I’m building for my dad.
I’ve been looking at the 228/232 and the btr red hot cam, and the gm performance hot cam
I think it was 2001 they came with ls6 intake in oz
And US.
Hey Richard I got a question what camshaft recommend for ls1 5.7 stoked no spring change needs
LOOK FOR NSR CAMS FROM BTR
@@richardholdener1727 thank you so much
How are you Richard? hope all is Great.
I am building a 5.7 now. I was looking for Rhs heads but I can’t find them. Is 243 heads a strong head? I am putting a car heads and intake
they work well
Thanks bro! For your help. What gaskets do you recommend?
@@bdozflo3010gaskets depend on your desired compression ratio. It's best you go to someone who knows what they're doing.
Hi Richard I enjoy all your videos , I have one Camaro 2002 with ls1 do you think ls1 is good idea for a single turbo or it is better a 5.3 ?, regards from mexico
ANY LS CAN RUN BOOST
Thankyou👍
See out American vans have 6.0 and 4.8s. My own personal truck is powered by an 07 express van lq4. That said don't the aussies have rb30's in the wreckers?
Lol no days of rb30s in wreckers are long gone. $500 gets you a block with matching crank and girdle these days if you're lucky.
RB30's were sold new in Australia from 1986 to 1990 so they're long gone from the junk yards
4L NA Baras are still cheap and Plentiful for now .
@@briangiannattasio61 did y'all get a lot of ford 4.6/5.4l motors? Or did everything get a barra instead?
@@Prestiged_peck we got the modular 5.4 "boss" but think it ran different heads . but no were near the numbers of the 4l Bara
will you be tuning any normal car engine? Or you only do bus and truck and locomotive engines?
So in the USA this motor came in the camaros and the firebirds, the corvette, the impala got a v8 at some point in the last 20 years, as did the cobalt, and then we've got the northstar cadillacs, not to mention all the Lincolns that came with ford v8s, or the literal millions of crown Victoria's/grand marqs/town cars. I don't think you can get more normal than an impala or a crown vic.
@@Prestiged_peck and rest of the world (except maybe Australia) is making fun of that. You take an engine from a lorry and put that in a car.
isn't this a normal car engine
@@rimka11 Let them make fun. Do you care what stupid people think?
Half of that displacement would be considered a big engine in Europe, and in Asia you can make like four normal engines from one American V8 :D
Ahhhh yea you finally read my mind thank you!!!!
@richard holdener can you plz do more 5.7l ls videos. I'm tryna decide whether to go 5.7 ls or 5.3 ls
grab a 5.3l and bore out to 5.7L
If I upgraded my cam , can i use factory ecu?
yes-with a tune
I have a good 4.8 crank and 7 gen 3 rods and pistons if you want them I’m in Temecula
Heres a project for you! Please take my 17 Jeep Grand Cherokee 5.7 hemi and make er LOUD N PROUD AND Rippin at 500 plus AWH...
Ls1 5.7 with 862 heads? Any test with those heads?
TAKE A LOOK AT THE STOCK HEAD TEST VIDEO
Right on
RICHARD GET TO TESTING WITH A LSA BLOWER !!plz
Genuine question... watched plenty of vids on LS’s, and would love your input.
I’m currently on a 1JZGTE/ AR5 setup, and looking to get rid of it all and swap to an LS setup. Car: Built 240sx S13
I’m aiming for AutoX, Ima blow all my big bucks on a T56 Mag and twin disk setup, but on a budget for an LS setup pushing maybe 450whp, what would you recommend? Wanting to keep weight down so preferably an Aluminum setup. Genuinely curious.
alum na 6.0L
@@richardholdener1727 Thanks for the reply, been looking around at 6.0L Aluminum block.
Doesn’t matter to much to me at what it is, I was even looking at 5.7Ls and thinking about Cam, Porting the heads, and an intake.
Been looking at like LFA blocks as well, and doing DoD delete and minor mods as well. Not as common around here to find these though.
Yes, the OG!
Speed secrets.
Can we get this same type of video on a l83 5.3
Me too
Wondering if you got your hands on the BTR intake or the MSD intake on it..??
msd yes-I've tested those, BTR no, its a high rpm intake
Richard!!! I've been dying to ask you this, what would the 706 heads do on a Ls3 or the 6.2 truck engine, would it be beneficial 🤷
No probably not. GM saw fit to move away from cathedral ports for a reason. LS3 rectangular ports are "copies" of bbc heads which out flow, make more power through out the power band & vast efficiency.
rec port ls heads are not copies of BBC heads-the 706 head add some low speed torque, but be way down on power compared to ls3 heads (I tested that on an LY6)
@@richardholdener1727 Thank you sooooooo much for answering bro YOU ARE TRULY THE MAN!!!!!
Ls1 will always make more power then a 4.8 or 5.3 with the same mods it will even out perform a 6.0 unless it’s a lq9 good luck finding one of those
it makes less than a mod 6.0L
What about the L76?
any updates on the vortec 4200 build?