hey just thought i'd weigh in on the barb issue, I use the bh90 shimano barb on the magura hose and it worked just fine, I've also used the shimano bh90 hose, all i did was swap the o'rings overall for the banjo.
Hi.I'm going to do the same with my brakes.I'm thinking of using Magura Royal blood oil.Magura oil has a higher viscosity and withstands higher temperatures and heating during operation.What do you think?What pin you use on a hose?Magura or Shimano pin?What ID (inside diameter) BH-90 is 2.1mm wide ID,and BH-59 is 2.5mm ID,the BH-59 pins are made of brass usually,and BH-90 out of stainless steel?Obviously for Magura oil it would be better with a bigger one ID pin.
The material of the pin surely makes no difference, the only thing important is whether or not it seals. I re-used two pins from old magura hose ends. Youre not meant to get them out, its quite difficult. If you have to hammer the pin in, and you feel like you will never get it out again, its perfect. Regarding the oil, i believe you should be less likely to have problems with magura royal blood, becouse unlike the shimano oil it shouldnt absorb water, and not having that property is probably better for random rubber seals? idk. It will probably be okay either way. good luck bro.
best summary of shigura I've found.
hey just thought i'd weigh in on the barb issue, I use the bh90 shimano barb on the magura hose and it worked just fine, I've also used the shimano bh90 hose, all i did was swap the o'rings overall for the banjo.
btw that bolt is called the free stroke bolt
Sehr hilfreich!
That brake hose diameter is first on RUclips! good job with the attention to detail!
Hi.I'm going to do the same with my brakes.I'm thinking of using Magura Royal blood oil.Magura oil has a higher viscosity and withstands higher temperatures and heating during operation.What do you think?What pin you use on a hose?Magura or Shimano pin?What ID (inside diameter) BH-90 is 2.1mm wide ID,and BH-59 is 2.5mm ID,the BH-59 pins are made of brass usually,and BH-90 out of stainless steel?Obviously for Magura oil
it would be better with a bigger one ID pin.
The material of the pin surely makes no difference, the only thing important is whether or not it seals.
I re-used two pins from old magura hose ends. Youre not meant to get them out, its quite difficult.
If you have to hammer the pin in, and you feel like you will never get it out again, its perfect.
Regarding the oil, i believe you should be less likely to have problems with magura royal blood, becouse unlike the shimano oil it shouldnt absorb water, and not having that property is probably better for random rubber seals? idk. It will probably be okay either way.
good luck bro.
Thanks@@patrickbl2
hey, you're fine to use the bh90 barb, tried and tested!
It’s the opposite with the mineral oil. Royal blood has a lower boiling point.