Jaguar key remote control programming and battery replacement, XJ8 XJR - Auto Repair Series
HTML-код
- Опубликовано: 8 окт 2024
- Remote Programming: 5 to 15 minutes ($5 / $70 / $130)
In this video I program the remote on a Jaguar XJ8 and show you how to replace the battery in the remote. This will likely work for other Jaguar cars.
If your remote programming is different, please post the instructions here below with the car details.
This worked on my Jaguar 1998 Vanden Plas. I couldn’t believe it. Bought a fob from eBay after losing mine on a trail, and now I have a working key fob again! You rock! Love your thorough, clear explanations
you are welcome.
I used this method and had several problems. After several attempts (6) I was successful!! Pulling the high beam the added times would not start the program mode. Trying several times at varying speed to pull the lever was not successful until I went very fast. Then, THE FIRST CHIRP WAS ANYWHERE FROM 3 TO 5 PULLS. I was successful pressing my new remote after the first chirp and again 3 more times, then pressing the original remote (not in the ignition) once. After 5 chirps, I turned the key off and removed it. Both remotes now worked!! Be persistent. I suspect my car was cantankerous!! Thanks Robert.
+Bob Jr Glad it finally worked out.
You, sir, are the Jag man. Bought 2 old style Ford fobs on EBay and programmed them using your information. Saved me a bundle. Thanks for the videos!
Good deal, thanks for watching.
This worked on my 2004 XJ8. The existing key fob lost its programming when the fob battery died. Adding a new fob battery did not help... so reprogramming was the only option. Thanks so much for doing this video!
You are welcome
Robert I remember you were showing a Jaquar rear light proble. I had similar problem my dashboard read check rear lights I was ready to go to Jaquar not wanting to because of knowing crazy bill. So what I did was go to auto zone store before going in store I stated checking bulb one was very badly rusted after changing bulbs no more check rear lights. I was very happy. Robert keep on the good work.
Thank you for putting this video up. Dealer wanted 150 for new remote and another 300 to program. How can I say thank you.
You just did. Thank you for watching.
I will keep watching your video's. I am sure I will learn more from you. Too bad you are not in Chicago.
Hi Rob, thanks for the very informative lesson. I have an XJ8 like this one. the original fob just stopped working. I got another 3 from the jaguar graveyard and thanks to your advice, I finally got one to work. Here is a tip to pass on. On these older cars, it's worth checking the keyhole to make sure the little gate in there is fully closed. (a little WD40 helps) If it's not fully closed, the car will not enter into program mode.
Now I need to adjust the hand brake shoes, have you a video.
Thanks. Peter,
Thanks for the tip.
Awesome experience
I try to use your information
Did this long back and again forgot. Rob, You're the MAN & dearly thanks for putting this up. GBY.
You are welcome
It worked like a charm. Thank you so much. God bless you and your family.
***** Thank you for watching.
Followed your directions to the letter and...no good!
Tried again, and again and again...nothing..
Then, I thought, "Gee, maybe I put the battery into the key FOB transmitter upside down?"
"Nah, No way, I could make a dumb mistake like that..."
So, here is my apology.
Sorry, I was wrong in doubting your video instructions.
They worked perfectly with the battery in correctly.
You have saved a lot of folks money by not having to go to the dealer to program their remotes.
Thanks
🤦🏾♂️ You are welcome.
Thanks for showing opening the remote for battery replacement. Even though it's pretty obvious to pry it open, it was reassuring to see it done so you know it's okay to keep going when you get the little resistance on the initial pry. I did not have to reprogram the remote after changing the battery, but I'm glad the instruction was here if I needed to!
Global Dairy Platform Thank you for watching and sharing.
Robert thank you for your u tube information I will trying it today I am keeping my fingers cross. I have not seen you on u tube foe a while last time I saw you you were not feeling well, so glad you are well. Stay well you and the family. Keep on doing a great job with helping all of solving our car problems., I appreciate it.
Thanks for watching.
Great video. Really precise and down to business. Good to see people keeping these cars alive!
+Tony Brown Thanks for watching.
Robert I had problems with my 2000 xj8 Jaquar dashboard saying check rear lights well after making an appointment but cancelling thank goodness I could just imagine the cost I went to check all my bulbs after one breaking and seeing the rust I went to auto zone changed several bulbs with the help from guy in store no more check rear lights saved money & cancelled my Jaquar appointment. I did watch you working on a Jaquar in regards to lights but I believe it was more involved I also remember a 600.00 approx. on cost. Thank you again.
Glad the video helped.
Phew, this sorted me out after my XJ 2004 X350 had been sat for a couple of months and the battery had gone completely flat. After charging the battery, all was good, but the alarm remotes just didn't work for some reason :-( I used your method and it sorted me out, but I failed half a dozen time before I got it to work. I found that the timing of the high beam flasher pulls was critical; too fast or too slow and nothing happens. I was delighted when I found the right frequency and got those chirps 🙂
Awesome! Thanks for sharing.
Thanks, Robert. Your procedure worked like a charm for my 2000 Jaguar XK8. You covered each step thoroughly and your directions were easy to follow. I will Subscribe, Like and Share.
Thank you sir.
thank you Robert the guy from e bay where I bought remote said I ordered the wrong remote. He said I can exchange or return I might exchange. Thank you again.
Good deal.
Robert, if you were around here I'd take you ought to a nice lunch with all the money you saved me. Bought a mint 2004 XJ VDP with 2 nice remotes. They started flaking even with new batteries and one quit working. Upon opening them up, the switches were gummed up with finger oil and I had to disassemble and electronic wash the circuit board in Marine Contact cleaner, alcohol, and Caig DeOxit D5. Finally the switches worked loose after all the green slime came ouf of them. Washed them some more and air dried all the cleaner. Buttons were now freed-up moving nicely in and out. Washed the buttons rubber sheet and cases in the sink with water and soad and an old toothbrush. All parts air dried and reassebled with new batteries. With all buttons working crisp and nice, I thought good to go, but still one remote did not work and the other flaked 1/2 the time.
Then found your video and tried your sequence, but my car (04) acted a bit different (there is no red LED light by the shifter), It took about 6-7 high beam flashes after key was turned to "1", I think the horn sounded instead of a chirp, and then I did one remote and then the other and turned the key to "0". So there was no need to go through 5 key pressings to exit. Immediately both keys work perfect, all buttons do what they are supposed to do.
Unlike the video key, I have the integrated key switchblade stype shape D key remotes.
Thanks again! Save a trip to the dealership and who knows how much money.
Up for a six-pack?
Very good. I don't know where you are located.
@@RobertDIY I am in NOVA, DC Area.
Thank you very much! You helping all ownerns of old xj's around the world
+TheRusGo thanks for watching.
You are very welcome. I remember you were showing a Jaquar trouble with rear lights. I had similar problems I made an appointment with Jaquar did not want to because just thinking of high bill amount. Well I went to auto zone I started taking bulbs out one had a rusted base ended up breaking well after changing three bulb., guess what no more check rear lights, I was so happy, I cancelled my Jaquar appointment ASAP.
+Laurna Calabrese glad it worked out.
Good video, Robert....nice and slow and very informative. I watched another guy on RUclips and he didn't show the button pushing sequence on the remote as you did. This really helped!
Thanks for watching.
Worked like a charm on my 2000 XJ8. Thanks a lot and greetings from Germany.
You are welcome.
I like to personally thank Robert for this most helpful information great job out there send us more videos
Thanks for watching
Thanks the high beam flasher method worked like a charm. Only issue I had was that the chirp is so quiet. Could barely hear it in the shop with other cars running.
kambesama It is faint. LOL
New jag owner here and I want to say THANK YOU
+TwiztedDiablo666 you are welcome.
My newly acquired 2000 XJ8 : I just took the FOB apart to clean due to delayed function, to my surprise it had 2 batteries stacked on top of one another(a first in my past 308 ventures lol). So now it's dead in the water after re-assembling, I'm assuming it must be programmed again once the batteries have been removed, oh the joy lol.
With my last 308 seems I remember a website that sold used FOBs already programmed & ready to go, wish I could recall that site.
Anyways Robert DIY, I'm back with another toy lol. Thanks for your info. sir.
+Charles Dietz You're welcome. It should not need programming. Have it tested at a dealer for free or somewhere else.
I also have a 2000 XJ8. I opened my fob and found two batteries also. I just put one new battery in, closed it up and it worked fine.
worker great on my 2006 VDP thank you very much for your work.
You are welcome
Clear. Applied just now. Worked OK. Thanks
you are welcome.
Thank you for the hard work you do on posting and sharing your videos. Please keep up the good work even though some of us forget to give thumbs up. Godbless you
+DROINDS Thanks and thanks for watching.
Great video! Good easy to follow instructions and good views of each step. I also liked the introduction to the key system. I found that it was easier to have the drivers side door open and the trunk (boot) open while I was doing it so I could hear the chirps.
I just bought two OEM keys and now need to get them cut at the dealer but I guess they have to be programmed as well. Any videos on programming a new key?
Christopher Swift Thanks for watching and no I do not.
Great video, I have one working key fob and one to program, do I still need to flash the lights 5 times ? you said something about the program not completing if the car thinks there will be 5 remotes ?
I don't remember.
Thank you sir the best explanation step by step to programm the fob
You are welcome
Thank, you for you're video. I, own a 2004, X type 3.0 jaguar I'm having the same problem but this is what I did. I, sprayed some starting fluid in to the air box then the jaguar stared up so I think my problem is a bad electric fuel pump because my friend that I got the jaguar from was just driving it
Sounds reasonable to me.
Great video man! Thank you so much. The local Jag dealer wanted $115 to do this!! I LOL'ed in the guys ear.
Clint Sturts Good for you. Glad to be able to save you a little $$$.
Also my chirp sound did not work so I watched for the light on shifter and did it 5 times like u said and it worked :)
What year is your car?
Robert DIY 2001
OK, thanks for sharing.
Rob I always watch you on u tube you are very informative with knowledgable, but I still ca not get remote to work I will try again tomorrow on my 2000 xj8 Jaquar. Thank you.
+Laurna Calabrese you probably have a bad module.
Thanks for all the jaguar personel!!
you are welcome.
EXCELLENT! Finally a man with a real brain and a talent. Thank You! ... I have a 2000 XJ8 with an air bag light on.... I'm so lost! Any ideas?
You'll need a level 2 OBD-2 code reader to figure out what has tripped the code. Then fix the offending issue. Could be any of the air bags or a seat belt.
Much appreciated and worked on a 2017. 😊
Wow! Thanks for sharing.
Hi Robert I had a mechanic work on my car and he replaced the security and locking module and then told me that my remote wouldn't work anymore, can you help how can I solve this problem Thank you in advance. I love your videos, you have helped me many times!
Ok
Thanks Robert that worked very well with our XJR
Alice Elderkin Good deal.
Thanks for the great video. Haven't had a chance to try this yet, but I'm sure it will work.
Randall Lum Good deal. Thanks for watching.
Hi Robert, thanks for your help! I’ve entered the program mode with no problem but after that when I start pressing my new remote I hear 2 churns and the process doesn’t complete (the shift light doesn’t turn on). I’ve a 2001 XJ8
Ouch
Worked EXACTLY as you described...thank you! thank you! thank you!
+Mathew “Rajan” John Cool, thanks for watching.
Worked successfully on my UK model (RHD) 2002 XJ8. Note however, it didn't enter the program mode with the first key I used in the ignition (tried flashing routine 3-4 times) but did first time with the second one (both full black not green valet keys).
McTheKnife Interesting. Maybe the relay was malfunctioning.
Like your clips vey much as you do explain very well and all about the subject.
Question: Do you know if this works the same for XK8 1999 as well?The so called universal remotes and not original Jags would be programmed similar to this or they need special procedure?
Thanks,
The programming system is part of the vehicle. As long as the remotes have the proper frequency, they should work fine.
This was an excellent video, thanks!
you are welcome.
Thank you, Robert! This worked perfectly.
do you know how to disable the auto central locking when the car is put to gear?
No, you'll have to check the owners manual.
Great Video. LIke you were mentioned when you program one remote the other one stops working. So you mentioned press the button five times for one remote. Is it press the button 10 times for two remotes?
+Darryl Tran please watch the video again.
An interesting video.
I am not sure if the same method works on other Jags, on the x300's you need to use the valet switch.
ok.
Robert it was just replacing several new bulbs. Now I am having problems with my remote I bought on e bay. Was in the car for around 20 minutes not working I'm trying your u tube one more time today. Only programming one remote. Unfortunately went bought used car I was only given one remote. Take care.
+Laurna Calabrese thanks for watching.
Another quality video. Many thanks, Dave.
Programming fob worked as described... Thanks
+Rick Floody you are welcome.
Thanks for the video Robert. One question regarding the key remotes; do they have distance issues ? Meaning if you have to be that close to make the remote to work ... I own a 2000 XJR & 1997 XK8. I do not have remote for the XJR but shopping to get one or two. I do have remote for the XK8 but it gives me a hard time to put it to work. I replaced the battery but still having problems to open/closed the locks. Any recommendations where to buy them for both vehicles ? Thank again !
Not really.
ruclips.net/video/nSGTLlMhHGw/видео.html
Thank you for an easy, simplified and useful information.
***** Good deal.
Robert - you are the best. I think this was my third video. Thanks
Rick Cotroneo Cool, thanks for watching.
Robert thanks for your reply after tomorrow I had enough of tries if you know what I mean LOL. I bought on e bay used of course. Time to return. Thanks again.
Thanks for watching.
Hi Robert, the car doesn't seem to "chirp" or the gearbox light does not flash? Is there a difference between US models, compared to my UK model?
Great video. Works like a charm. Thanks!
You're welcome!
you rock, David. a real mensch
Thanks for watching
Beautiful instruction! Thank you sir.
You are welcome
Worked for me on my neighbours Jag but did not get a chirp he's had a new alarm box fitted otherwise it's working fine Thank you.
+James Carruthers you are welcome
This is a great video. Thanks so much. Great explanations :-)
You are welcome
Thanks was really helpful ( XK8/98)
You are welcome.
Remote programmed perfectly! Thanks!!
You are welcome.
Good info on programming remote, is it the same for an XJR?
I have no idea.
Robert you are welcome even had my husband watching you trouble shooting he enjoyed watching.
+Laurna Calabrese nice.
Hey Robert .. I have a 1999 XJ8 Sovereign in Africa ... question ... can any remote be programed? or does it have to be the original Jaguar remote that came with the car ?
has to be a remote with the proper frequency.
Hey Robert, thx for your great video. I followed your video step by step but it my car is still not fixed. My Jaguar is 2005 XJ6 x350 3000cc is it appropriate for my car?
No
@@RobertDIY any suggestions on my x350 remote reprogramming? Thanks
@@jackycheung412 It worked on my 2004 X350, but you need to experiment with the timing of the high beam flashing pulls. I found thatdoing four pulls in less than two seconds worked, but any faster or slower did nothing :-S
Thanks for your reply and I’ll try it late today followed your suggestion! Keep you all updated
Very well done process.GOOD JOB
+Noel Keefer thanks for watching.
Good vid, I was able to get my remote working again.
***** Cool
Hi Robert, My car s type 2003.I try to re- program my key after change new battery,but nothing work.I only have one remote key.Its possible the receptor from the car not work? Can you please advise. Regards, Acu.
Good instructions, I'll give it a try
+Lauren Sutherland cool, hope it works out for you.
Worked like a charm! Thanks man!
Jamie Pelock Good to hear. Thanks for watching.
Thank you Thomas, for your help.
+Glen Smith You are welcome.
Hey Robert I have a 2012 jaguar XJL and my key fob stopped working and I can’t afford to take it to a dealership could you please give me any tips on how to fix the key fob it’s self
Sad to say, no I can't. Did you try replacing the battery?
Hi Robert ! What if the lock button on the dashboard doesn’t unlock or lock the doors ?
ruclips.net/video/cZucMWMWyBE/видео.htmlsi=GX44yPSxE6yHFcHd
@@RobertDIY thank you very much for your reply Robert! I meant to say the lock button inside the car doesn’t work. I keep pressing on it and it makes a small click sound but doesn’t unlock or lock the rest of the doors. The remote only turns the light on and makes a peeping sound!
An excellent explanation. Thank you.
You are welcome
Locked car last night . Woke up this morning with a dead fob. I changed battery in fob, but have no access to inside of car. What can I do?
***** The fob should NOT need to be reprogrammed. Try to open the trunk and charge the battery. Use the key to open the door.
Robert I have a question please. I went again to my car to,program remote I'm ok up to 2 cherubs turn key to me leaving in then press the remote on bought on e bag doesn't work I even pulled out key pressed remote twice still doesn't work, would you know why not programming. Thank you
+Laurna Calabrese if you don't hear the chirp from the horn, indicating that the car has entered into the remote programming mode, there is a problem with the car.
Great video! Very informative, thanks.
Excellent video very well explained, thank you
+michael stanley thank you for watching.
Excellent presentation
+richievpiano thank you.
Hi Robert, will this work on a 1999 SType Jaguar.. My original fob ended up immersed in Cola and corroded the contacts...bought a new one of ebay but need to program it....Thanks. Keith.
It should. If not, ask the guys on the Jaguar forum.
hello Mr. Robert i have a 2001 jag xj8. How can i replace the signal light controller and the gear shifter housing. I know that these parts are expensive . Any suggestions as to where I can buy these parts at a reasonable price. The signal light controls many electrical functions and the gear shifter housing will allow me to get the car in gear. Thanks in advance
+Armando Perales Not really. Maybe eBay or a Jag forum.
Does it have to be the master key? Or can it be the valet key that is used to program it?
I do now know. Try it and let us know.
I have this car and it seems to be stuck in valet mode , the remote will not open the trunk and the truck bar inside won’t either , I need to use a key . Do you think reprogramming would help this or is there something else we can do?
Probably another issue.
Where is that fan located and how do I switch it off? Some one else said it could be ignition not turning off due to something sticking on?
Pavee piper That is possible. You should be able to turn the fan off with the AC controls. How long does it run after the car is off?
Very Smart Man! Thanks...
You are welcome
Great information. I'm glad I found this channel. Just subbed..
Awesome, thank you!
Worked perfectly thank you sir!
Gurpreet Hira Good to read. Thanks for watching.
Robert, do you know if this will work for the XJR 2004 and good place to buy the circuit board, my button broke off?
+hotknottfl Not sure about the 2004 cars. If you shop for a replacement remote, they will tell you if you can program it yourself or have to have a dealer do it.
Worked for me...thanks!
Good deal.
you can be a pastor robert you preach real good
+jefris oh no. I'll settle for an instructor. 😉
Do you have a video on how to reprogram a type x Jaguar 2002 ecm? Thank you so much
No
@@RobertDIY thank you. I have to find something or someone. lol!! it won't even start now. replaced the ecu, ecu computer to get the brakes to work. Endless battle with that car. LOL!!!
ruclips.net/video/YiPAPu-K8OI/видео.html
Will this work on the jaguar xj8 vaden plas (2008)? Is there a remote starter for this car? Thanks in advance
I have no idea.
Robert where do I find instructions to fix Config b on 2004 Jaguar CJ8
JaguarForums.com
How about one on 2001 jaguar type s this would be great with switch blade key
I have no idea.
Thank you sir, very informative
You are welcome.
Hi Robert,
I followed the instructions; however, only two keys (lights and truck) work. The other two keys (lock and unlock) do not. Any ideas?
+Gerry Ausiello nope.
I "cleaned" the pc board and the rubber button contacts, and now all the buttons work! Thanks for your help