Wood and Vinyl Welcome Sign Using Cricut
HTML-код
- Опубликовано: 12 сен 2024
- Today I am making a welcome sign for a front door that is using painted wood and chalkboard vinyl. I would have preferred to use oracle 651 which I purchase from here: bit.ly/2OO780i
*You can find my stamps, classes and so much more information at www.maymaymadei...
*Join the Stamp of the Month Club: bit.ly/1rqjoZ0
*Join the Scripture Stamp Club here: bit.ly/2wxFrTE
Our sister channel is Maymay's Product Parade: bit.ly/2HUTOav
*Facebook
Maymay Made It and So Did I: bit.ly/2ldbGPq
Maymay Made It: bit.ly/2sCsWoL
Hide His Word in my heART: bit.ly/2q5hBHP
Maymay's Crafty Country Store: bit.ly/2sCDDY6
Follow me on:
*twitter: @maymaymadeit
*Instagram: maymaymadeit
*Email: maymay@maymaymadeit.com
Maymay Made It
PO Box 348
Verbena, AL 36091
You can contact us through our website as well: bit.ly/2wkea7p
Some of the links provided in the description of my videos are affiliate links. Clicking on those links help to support Maymay Made It. I purchase all my own products unless otherwise stated in the video. From time to time I will get product to review.
The Best, detailed video about cutting vinyl and putting it on a sign. I so appreciate no background music, speeding through steps, you showed exactly how to do this without extra info!!!!
I have no words to express just how THANKFUL I am for this video !!!! It is amazing and a HUGE HELP to me. It is also very well done and hands down one of the BEST " how to" videos on You Tube. I got my Cricut YESTERDAY to try to make these big Farmhouse wooden signs and I was scared to death on how I was going to do that. I typed in "How to make BIG wooden signs with a Cricut " and yours was the first video it pulled up ! ANSWER TO MY PRAYERS !!!! Thank you so much for your help !!!! Cheryl
I'm a hands on learner and usually I tune out with just listening and watching someone teach. You held my attention the entire time. Thank you
1st time here, you did a wonderful job explaining this. Thank you.
I can't believe how much FUN I've been having watching your crafting videos! THANK YOU! I finally had to stop after about 5 hours....but I went to your store, ordered some "goodies" and joined too! WOW! I'm having a BLAST! ;-) Thanks so much for all your tips and tricks! I just ordered a We R Works Tool today, then found your video! WhoooHoooo! Gold Star? Nah, that's like 50 Gold Stars! You Made My Day!
I love the “if you're from the south you can leave off the "E!" LOL I bought my expolorer 2 a few weeks ago, and have only played on it. I have a huge project for holiday gift boxes (32) for work and I need to get crackin' on learning how to use this thing. I think I have everything...but I didn't have a great tutorial yet. I painted my wood pieces (too tall have to cut them down 12") yesterday. NOW I have the right tutorial. THANKYOUVERYMUCH! You rock!
Omg! After so many videos, this hit the nail on the head. I wanted to do something for my mom just to give her something to add to her butterflies and hummingbirds and this is it. Thank you for your detailed explanations 👍 😊.
This is exactly what I have been looking for. Thank you Thank you Thank you!
You are a great teacher. Everything explained to the minimum detail. Love it! Thank you!
MAYMAY!!!! Across the street, they're building a BIG four unit condo and I've been collecting "trash wood" just for this purpose. I really didn't know where to start - thanks for this timely tutorial!!! Now I can't wait for the weekend to start . . . . You're the best!
today is my first time watching you, and I loved this project. I searched for porch signs, and you were the first to pop up, whew, it made my life much easier, Thank you,
Oh my word! I’m super excited that I found you ! I’ve learned at least 3 things I didn’t know and I’ve been using a cricut for several years !! You’re a great teacher ! Will be bundle watching your videos ! Thank you !!!
This was the best, most informative, easy to follow tutorial I have ever watched. Thank you so much!!
Very straightforward and to the point!
Thank you so much you are an amazing instructor. I just purchased the cricut air 2 and hoping to have some fun with iot . You know how frustrating it is when you don't know what your doing and thanks to crafts persons like yourself I can learn as I go. Thank you.
Loving the M part!!! Finding out about the extra large 12x24 mat and printing the letters in 3's..... FABULOUS!!!!
So darn cute! I went out antiquing today and found signs all over. They were soooooo expensive. I’m not super crafty and I don’t own a cricut. I really enjoyed watching the process and I’m fascinated! 😀
Thanks for your videos, I'm mostly a woodworker but I thought I could incorporate the Cricut to my hobby and I'm just getting started with it. You explain things so well! You have the best instructional videos I've seen so far! Keep them coming! :))
Stryker 2 I agree with you a 100% 👍🏻
I agree you explain better than the others i have watched. Thank You!
First off I love this project! I've wanted a welcome sign forever and I feel like I can actually make one now since I've watched your awesome tutorial. Secondly, there's something about your voice that is so pleasant to listen to! And finally, I just want to say that I appreciate you sharing so much. Have a blessed day.
Love this! Best tutorial ever! I am still learning the tricks of my cricut and I am so glad for this! This is going to Make my project so much simpler. Although I only have a 12" mat, I can still work with 2 letters at a time instead of 1. So Excited to try this!
I love this video so much, especially all the little “mistakes” the trouble shooting tips are such a help!!!
I just got a maker this week! I have to say your video is the best I’ve watched! You explain things so well!! Thank you!!
You’re an amazing teacher! You have a new subscriber in me and THANK YOU for such a thorough Cricut tutorial
I love playing with vinyl. There’s just something so magical and satisfying when you peel off the last later. Thanks Maymay. Hugs and blessings.
I am new to the Cricut world and was having a difficult time with their tutorials. You explain things so well, Cricut should hire you to do their tutorials!! Thank you so much! BTW I did make this sign and it came out great!
Thank you so much for this video. I am new at cutting vinyl but thanks to your awesome tutorial I was able to make a beautiful welcome sign for my front step!
I had seen signs but never tried making one. I love this & you you are such a great teacher. I will be going out to get some wood & vinyl just to make a welcome sign & maybe a special one for my Barbie room. Thank you
Love those pumpkins, that sign is really cute too.
Thank you so much for this! You are such a great teacher! God Bless You Sweet Southern Lady!
Finally someone explain this so clear good job 👏
Oh my goodness.....Maymay, I just purchased my cricut machine today. I came across your site and loved your Welcome sign. I am going to try to print me a long Bible verse that fits the same size of board but going across instead of like you that you made vertically. I am brand new to these projects, do I just turn the template across? You are my new best friend....LOL
What a great video!! I’m just learning how to use my Cricut, so your instructions were super helpful!!
It turned out beautiful. Made me want to make one. I'm going to be on the lookout for a piece of wood now. Love how yours has the flat piece in the middle.! Thanks for sharing.!
Scrappingpinklady me too.. I have a little trick instead of having to figure and calculate the adjustments with you’re blade on a saw to get that edge. Just buy a very thin trim board from Home Depot or Lowe’s. You can pick them up very cheap under 2 bucks for 12 or 14 feet ‘ estimate’ and just cut two sides strips for the full length of you’re board for the length of you’re board then measure two small pieces to go in between those two strips at the top n bottom. This is just a quick little short cut for me much easier then cutting them in. Hope this helps and hope I could some what sound like it makes senses. I’m not the greatest instructor haha.. Happy crafting..
@@KimmieB. thank you for sharing.
WoW! You are amazing!!! I am so glad I came across you site. Thank you for sharing.
Omg, you explain every detail so well.. Thank you!!
Yes, you could have stopped at M and added a purty flower in place of the E! So glad i found you! Thanks!
I think may may is awesome lady ( she has so much stuff and shes sooo gifted , thankyou May may
Great project. I always leave the template box to help me keep everything lined up. I am NOT the queen of eyeballing lol. Such a simple project. Can't wait to try it.
Love how you explain everything so well!!!! Thanks!!!
Maymay, maymay you gone make me spend some" Moneeey, Honeey!" I love the Welcome sign! Thank you so much for this experience! There was various sizes of wood left in the garage when I moved here. I am so glad I didn't throw it away! Love you honey!
This was really really helpful. I made signs for my classroom door using this tutorial :) Thanks so much!
OMG I love your tutorial! Thank you so much. Newbie here and I loved how easy and thorough your video is, can't wait to try this
Omg ! Thank you so much, everything was PERFECT! You explained everything very well. I am excited and YES I SUBSCRIBED ❤️
I am new to Cricut. Your instructions were very helpful! Thank you!
It turned out so great! Thanks so much for sharing. 💗💗💗
Please do more circuit projects. Love love love the sign.
Well, that was awesome!
I wish I had seen this before I cut individual letters for 3 Thanksgiving boards last night 😪🤦♀️🙄
Thank you for sharing. Really easy to follow and understand.
Best tutorial I've found. Thank you!
I purchase a machine in a garage sale and I do not have a clue how to use it...so I believe i am following you to learn the fun way...thanks
Thanks for the tutorial. So great to follow.
You make this look so easy. Love it!
You explain this so well thank you so much for this video.
Hello, I used chalkboard vinyl and I had no luck with it staying on my board and I used contact paper as well. Yours looked great, and I am a beginner!
I love it! Such a helpful video 💕
Yes I would like 😊
A great video on the welcome sign!!! Going to do this one for my entrance all seasons!
I wondered if anyone had any ideas on the pumpkins next to the sign??? How were those made???? Love those and would love to have those for fall.
Absolutely loved this! You two make a great team! :)
Great tutorial! Love this...btw...would love to see how you made those pumpkins, love them...🎃🎃🎃tfs...continued blessings.
Omg! I thought I’d be satisfied with my Joy....I may have to get the Maker❤️
Love it. Great instructions as always!!! thank you
Oh my goodness I came here to learn how to make these porch signs and it looks like there is a lot to learning this machine. For those who are technically challenged like me, do you find it was hard to learn?
I love this. I have been wanting to make a sign but I find it intimidating. You made it look very easy so I know what I’m going to try this weekend.
Turned out great, I hope I can do this
thank you for sharing. You are very good in all your projects.
great tutorial. You make everything look so easy
Just found your Channel and love it! :) Your a great teacher. I'm going to be getting a Cricut soon and can't wait to make this sign. Just have to figure out where I'm going to get the wood :) Thanks for this wonderful tutorial :)
You were so good at explaining so that we could understand. Now i have to watch all of your videos😊 Im trying so hard to learn. Thank you!!!!
Thank you for sharing! i love your tutorial!
Lovely project MayMay! Ive just gotta get a cricut ! Love that you got Vinnie involved :D
Beautiful Ms. Maymay I Love you and your Hubby saying your E is off lol I guess he has to use the Basement door from now on...
I have started to buy this sign many times. I think Glenn and I have a project to fix, right after we work on his zero turn mower. 😉
You did a great job, i wish you would do more cricut videos because it is very overwhelming for me...lol
Dawn Fregoe 100% AGREE and she just explains things so easily to understand.
I want to make signs like this. I have a super old cricut but I can still make them:) thank you for sharing:)
THANK YOU!!! Short and to the point, I appreciate it!
This video was helpful but also made me laugh! You have a great personality 😂
You guys have so much fun
Thank you! This helped me a lot with my project
Beautiful! I know it is for someone else, but it looks so pretty there. Love those pumpkins too. Hugs, Brenda
How you like them apples? THANK YOU SOOOOOO MUCH. It looks so simple and easy now.
love ur accent and u are such a good teacher...actually i was getting it...LOLOL....
So pretty!!
I like you very informative
I had to leave another tuber because she just assumed you knew the things she was doing first time searching this ideal
Wonderful job! Love it!
I absolutely Love your videos!!!
Awwwesome!!!! Thank you!!!! Soooo helpful now I can make anything I want!!!! Saving to my cricut playlist!
Nice video! I hope will be doing more project using the Cricut 😄😄😄
Goodness, you 2 are too funny 🤣🤣. The sign turned out beautiful!!
Your video was amazing! Thank you so much!
Absolutely love this video! Hubby just gave me my early Christmas present last night...a brand spanking new Cricut Explore Air 2! I was so excited I could barely sleep. He's going to learn with me on how to use the Cricut and your video will definitely help us. We're from the south too and that's exactly how I pronounce "welcom" lol.
What a GREAT tutorial! Thanks
Thank you for sharing this welcome sign I have been wanted one of these sign I just order the Cricut Toy don't have no clue how to use it..
This is so pretty, great job, love it
This was so, so helpful! 💙
OMG I love you ! You explained everything so well Cant wait to watch your other videos !!
You two are funny. I love it.
Thank you! So easy to follow along!
Welcom !!! Love that!!
Your comment that you could stop at the "m" reminded me of a time I was driving in Missouri and on the hill was a huge sign on a vehicle that read " For Sell". 😂😂😂
On your design space you can change the color of your canvas to black so you don’t have to put the little box behind it. It’s right above the weld & attach :)
Love this! Thanks for doing this tutorial.