Thanks. I have a Craftsman Z6000, and this video helped. When I pushed the levers all the way forward, the mower would turn towards the left. When stationary, the left lever handle was about two inches behind the right lever handle. It has a forward facing set screw on each side, below, and towards the outside of the seat. That's what stops the forward movement of the lever. The levers have adjustment bolts similar to the one in this video that I used to line up the handles. Now, when I push the levers forward, they both stop evenly, and I move straight forward at maximum speed. I turned left and right and backed up while turning, and everything was perfectly even. I really thought this would be much more complicated, like adjusting a cable or tightening a belt. Thanks again. Now mowing the lawn will be a little more enjoyable.
H B 0 seconds ago I just purchased the 75750 only for my home. I couldn't believe it! I almost landed in the street on a decline! I used it for 1.7 hours being very careful operating when I turn left to go back it just slides like ice down the hill. Our yard is mostly flat except for the front with a slope of more than 10% in front that I tried to stay away from. I was ready to jump off to the left. I locked the brake quickly thank God no damage!
Great video. I have a Toro Timecutter 75750. Is changing the gear oil a regular maintenance item? If so, can you make a video showing how it's done? Thank you
My Exmark Quest 42" 2014 has pulled to one side ever since it was new. But I always just thought it was tire pressure and it didn't pull enough to one side to really bother me until recently. With tire pressure all equal it still does it so I'm gonna try this adjustment next. I hope it's this easy and similar on my make and model. Thanks
I have the Toro Timecutter 50. Will you all be doing a video on how to level the deck. With the way the adjustments are made it seems impossible to get it level. It seems that the 18" rear tires it comes with are too small.
You're actually taking the transaxle out of the neutral position by turning that nut on the rod. That should be adjusted with the engine running and wheels off the ground. You will tear up a transaxle by running it partly in reverse which is what that does.
@mainstreetmower Can you do one of these for the 2024 Timecutter Max? I just picked mine up and she pulls left but there aren't the cams as illustrated here.
Hello, My right handle on my toro zero turn almost has no response to forward/ backward movement. It’s working maybe 20%. I was cutting some fall grass and I noticed it was messing up after. What’s the issue?
Question, the arms on the toro I noticed on mine one side (left) goes to park and there’s a little bit of resistance and it feels right but the right side comes to neutral way too easy.. what could that be or is that normal?
How often does the factory under fill those transmissions and they end up going bad? and there is no quick way to check the oil in the small one sadly...
I have a toro titan zx48. I seems like the reverse speed is to fast if I’m on a slight incline in reverse the wheels break traction and I just spin. How do I slow down the reverse speed? TIA!
My stepdad has an older 74327 mower, I can't find anywhere one it which nuts might correspond with the ones you're showing. Right side doesn't go forward at all!
Doesn't work on a 74360 model Z4200 older Toro Timecutter. The left side will rotate ifnits up in the air but as soon as it's on the groundnut won't turn. Right side runs great
"you can make a fast side slower but you can't make a slow side faster" makes no sense. So, if I make the fast side too slow, it is now the slow side. Thus, I can't make the slow side faster? I had this problem. I simply made the slow side faster. Why would I want to decrease the overall speed of my mower by slowing the fast side? Mowers advertise speed. I recommend trying to increase the slow side first.
First you say you have to speed up the left hand side because it's veering to the left. Then you say you can't speed up you can only slow down. Then you show with your hand veering from left to right which was not the original problem. Then you say it's veering to the left so you have to slow down the left side? WTF? I'm totally confused! Or is it you are confused? LOL!
Thanks. I have a Craftsman Z6000, and this video helped. When I pushed the levers all the way forward, the mower would turn towards the left. When stationary, the left lever handle was about two inches behind the right lever handle. It has a forward facing set screw on each side, below, and towards the outside of the seat. That's what stops the forward movement of the lever. The levers have adjustment bolts similar to the one in this video that I used to line up the handles. Now, when I push the levers forward, they both stop evenly, and I move straight forward at maximum speed. I turned left and right and backed up while turning, and everything was perfectly even. I really thought this would be much more complicated, like adjusting a cable or tightening a belt. Thanks again. Now mowing the lawn will be a little more enjoyable.
This is awesome. Anyone looking for instructions on how to do it on a Craftsman would really benefit from it. Thank you for sharing.
T😢phff
The
Best explanation and clearest examples I've seen yet. Straightforward and to the damn point- thank you, grabbing my wrenches now! 🥰
Awesome. Glad the video helped.
Thank you for making this video I have a Time cutter, and watching this video solved my tracking issue.
Love to hear that. Glad to be of service 🤠
Thank God for this video, straight to the point
Glad you liked it 🙂
Thank you really appreciate it beats hauling zero turn back to the dealer for something simple.
Awesome. We're glad this helped.
Algorithmic engagement comment.
- Nice video.
- Excellent explanation.
- Very good camera work.
Thank you very much!
Absolutely, love the video, mate, no BS straight to it, thank you very much.
Glad you liked it Michael. Thank you for watching.
H B
0 seconds ago
I just purchased the 75750 only for my home. I couldn't believe it! I almost landed in the street on a decline! I used it for 1.7 hours being very careful operating when I turn left to go back it just slides like ice down the hill. Our yard is mostly flat except for the front with a slope of more than 10% in front that I tried to stay away from. I was ready to jump off to the left. I locked the brake quickly thank God no damage!
That's scary!
Great video. I have a Toro Timecutter 75750. Is changing the gear oil a regular maintenance item? If so, can you make a video showing how it's done? Thank you
My Exmark Quest 42" 2014 has pulled to one side ever since it was new. But I always just thought it was tire pressure and it didn't pull enough to one side to really bother me until recently. With tire pressure all equal it still does it so I'm gonna try this adjustment next. I hope it's this easy and similar on my make and model. Thanks
Did this ever work for your Exmark?
Very helpful!
Thanks for sharing this video.
You're welcome Geoffrey ☺
Thank you! Great instruction! Really appreciate!
Thank you very good explanation and video,
Thank you for watching Saleem 😀
Can you make a video on how to adjust steering and tracking on a 2023 Toro Titan? And adjusting the hydro speeds? Thanks.
I have the Toro Timecutter 50. Will you all be doing a video on how to level the deck. With the way the adjustments are made it seems impossible to get it level. It seems that the 18" rear tires it comes with are too small.
That's a good topic. We didn't have that on our plans but we will definitely put out something explaining that. Thank you for the suggestion 🙂
So 11mm wrench or socket to adjust the cam bolt under the seat, or 1/2” wrench for the “throttle” under the back. 👍
Was wondering about the same thing.
I have a 74702...where would the adjustment be for my machine? Thanks in advanced i really appreciate it 👍
Do you have a video for the Titan or is it the same setup?
just bought a new toro timecutter and could not figure out why one side was going faster than the other. Thank you.
Now you got it. Hope that helped 🙂
Great video Thanks
Thank you. I am glad you liked it.
You're actually taking the transaxle out of the neutral position by turning that nut on the rod. That should be adjusted with the engine running and wheels off the ground. You will tear up a transaxle by running it partly in reverse which is what that does.
Great job, thank you
You're welcome. Thanks for watching 🙂
Great video
Thank you 🙂
Ours seems to be going straight, but the handles are not lining up evenly, we were told this is common from our dealer? Any insight on this?
@mainstreetmower Can you do one of these for the 2024 Timecutter Max? I just picked mine up and she pulls left but there aren't the cams as illustrated here.
On it. Stay tuned video should drop within the next few days.
My Toro Time cutter z4235 doesn't have either of these options. Any suggestions on how to adjust this model?
Hey Ryan, if you could get me your 5 digit model number off the white sticker on the frame, underneath the seat, I can get you any answer on that
Hello,
My right handle on my toro zero turn almost has no response to forward/ backward movement. It’s working maybe 20%. I was cutting some fall grass and I noticed it was messing up after. What’s the issue?
Do these steps apply to toro timecutter Z5060? Having a pretty rough time with this ol' thing, don't have the money for a new mower right now 😑
It really is just that simple.
Question, the arms on the toro I noticed on mine one side (left) goes to park and there’s a little bit of resistance and it feels right but the right side comes to neutral way too easy.. what could that be or is that normal?
There's a tension bolt that lets you control the resistance of each arm. You can fine tune them to make them feel similar.
@@mainstreetmower where would that be? Is it close to that piece to adjust the tracking?
How often does the factory under fill those transmissions and they end up going bad? and there is no quick way to check the oil in the small one sadly...
Just purchased a toro 75750 time cutter. What is your recommended tire pressure front and rear for this model
15-18 PSI in the rear and 28 PSI in the fronts
Is there an adjustment if it doesn't reverse evenly? I can now get it to drive forward straight but reverse is way off
Yeah same with mine.
I have a 2020 75742 timecutter how do I add oil to my transmission
I have a toro titan zx48. I seems like the reverse speed is to fast if I’m on a slight incline in reverse the wheels break traction and I just spin. How do I slow down the reverse speed? TIA!
Should be noted to double check your tire pressures are even before doing this adjustment.
My stepdad has an older 74327 mower, I can't find anywhere one it which nuts might correspond with the ones you're showing. Right side doesn't go forward at all!
Good, Thx
You're welcome 🙂
👍👍👍👍👍👍
Im guessing that helped ☺
I appreciate the video.I have a ex mark and it’s the same.
Should be done my manufacture or Dealer that’s the speed adjustment, left or right.
Thank you.
Thanks for watching!
Thanks
Glad it helped 🙂
Doesn't work on a 74360 model Z4200 older Toro Timecutter.
The left side will rotate ifnits up in the air but as soon as it's on the groundnut won't turn. Right side runs great
I'm not sure what you mean by tracking?
"you can make a fast side slower but you can't make a slow side faster" makes no sense. So, if I make the fast side too slow, it is now the slow side. Thus, I can't make the slow side faster? I had this problem. I simply made the slow side faster. Why would I want to decrease the overall speed of my mower by slowing the fast side? Mowers advertise speed. I recommend trying to increase the slow side first.
Thank you, I just bought a 42 cutter Toro
I understand your point... but hey - now you know how to do it... right?
@@blessedwithchallenges9917 only thing you have to watch for, be careful of, is you sync both sides too fast, there won't be a true neutral :)
Psh what toro dont go straight 🤔
😂
Thanks but they don’t do anything. It actually is backwards it seems. It does not change the forward one but but drastically changes the reverse
alpine made the downed shift.
First you say you have to speed up the left hand side because it's veering to the left. Then you say you can't speed up you can only slow down. Then you show with your hand veering from left to right which was not the original problem. Then you say it's veering to the left so you have to slow down the left side? WTF? I'm totally confused! Or is it you are confused? LOL!
60K views, 70+ comments. Not one person thought the video was confusing. Nevertheless, we might be able to answer you if we know what the question is.
Is there a video on changing the transmission drive belt? model 75760-40663943
I have a 2020 75742 timecutter how do I add oil to my transmission