ATS Swap · Cummins to Allison Conversion Kit - Installation
HTML-код
- Опубликовано: 5 окт 2024
- ATS Diesel has engineered the first fully integrated Allison transmission swap for Cummins powered vehicles.
To find out more about, or pre-order the ATS Swap Cummins to Allison Conversion Electronics Kit:
www.atsdiesel....
IN THIS VIDEO:
Walk through the ease and simplicity of installing the complete ATS Cummins to Allison conversion kit, backed by our proprietary TRANSlator software. This revolutionary kit is a game-changer!
I know there’s some negative stuff out there about ATS, but I’ve worked with these guys with my truck over the last couple years and they’ve been awesome. I have their 5000 Compound Kit and their Allison Conversion on my 2018 Ram 2500. I can’t speak about other products, but thus far their customer service, support, and products have been top notch.
How much is the conversion kit cost, not install.
That’s a good question. When I did it they weren’t selling just the conversion kit and were requiring to get it installed here in Colorado.
Jay, there are always alot of haters out there. People misapply products and want to blame the manufacturer. The manufacturer R&D products that sometimes fail and that helps them improve. I am about to pull the trigger on ATS's complete Allison swap for my 2019 Ram dually. I haven't heard anything but good about the kit so far. I am eager to place the order and get it installed. Congrats on your new transmission. The kit looks top notch!
Dang! Sounds like a nice setup👍
How’s it tow? Trans temp ?
Thxs
@@Ishmaell711 I haven’t had any issues thus far. Trans temp runs very cool. I can’t tell you exactly off the top of my head, but it’s fair to say towing my 5th wheel (23k truck and trailer) I’m anywhere between 120-160 degrees depending on the type of grades.
Kudos to your technician who did a terrific presentation here and was very thorough and clear.
I received a quote from ATS for this for my '19 2500. I am seriously considering it but would love to take one for a spin first! Keep in mind that a strong 68RFE build is gonna cost $8k+ and you still will white knuckle it every time you bash the go pedal. The cost of this suddenly becomes reasonable.
Can't wait to do this. Thank you all for your hard work.
Edgar is awesome 👏🏼 he’s ready to have his own RUclips channel 😊
Nice clean swap great job squared away
And amazing presentation !
I'd definitely get my rig transferred over to ats ,if they were in Northern bc
Enjoy the videos on the conversion but I’m leaving this one early knowing that there’s not a snowballs chance in 😈 that I can afford it.
When everybody said putting a tuner on a truck is illegal in here this dude is both of them to the body I sure wish I could afford your complete system what kind of badassness would it be to have a 600 horsepower Cummins in a 1988 Chevrolet Suburban
Question how much cost 2012 ram 3500.
Awesome!
I want one for my 96. Was think about a G56 but if I can put one of these in it's a no brainer! Need my truck for a prototype??? I will even help!
On Facebook groups all I’ve seen is complaints about these conversions and lack of tech support. Has this been fixed?
I wish they were up north in canada 😊
Got a HD transfer case for the ram
Awesome
What’s the price tag 🏷 on this conversation kit?
Starts at 13 grand for a full kit.
Over 13k for a stage 1. Not counting for installation cost.
I would think for $12K you could rebuild your 68RFE for less and make it strong enough where you don't have to worry about it anymore.
Price it out and figure it out. Turns out, The cost difference is minor at the end of upgrading the 68 to match.
@@jonellwanger7258 Then why go to the trouble of swapping in a different transmission and making it work? I mean go for it if that's what somebody wants to, do more power to them. I was just thinking of the cost basis to get an equally good transmission.
Have a truck we can test drive with this kit installed? Is the 12,700 to 13,700 installed?
Nope. That's just for the kit.
What's wrong with 2004 2500 two wheel when transmission engaged the5.9 wants to run away
2010 3500 single cab dually - what kit would I need and how much?
It might have been easier to get the engine and trans out of a wrecked school bus or a Freightliner MDT chassis. Add your mods to the engine and boom your done.
any issues running this setup with something like a smarty tuner since both will communicate with the CAN bus?
Just called ATS. The transmission is an ALLISON, but their software uses EFILive tuners, while the conversion "box" tricks the ECU to thinks it's an AISIN transmission. Was told this way, you ocan keep all your factory options, which is mostly done via CANBus.
What about driveshaft length?
Do u make a conversion for a 2016 6.7 auto to a Alison's manual
How much hp is it rated for?
Depends on how you want them to build it
@@CaptainRudy4021 I'm sure I can get an Allison built for w/e; that's not the question. I'm wondering what the $13k for this kit gets you for hp rating. Pretty simple.
@@monsterram6617 taking into the account the output of the 2022 high output cummins and the fact that people will be modifying them, my guess would be 600hp. Any more than that, you'd have to pay to have the transmission beefed up more.
It would be nice but they can't get any A50 TCMs because theirs won't work with out it. They are not the only ones being held hostage by GM.🤬. Not until maybe the later part of the 1st 1/4. What happens if you system has a problem. Wait half a yr to get it up and going again? Would of love this system but now rethinking.
Maravilha muito bom tamo junto tudo de bão
Will this be the same on a right hand drive vehicle
How do coast to rebuild a 68RFE with bigger gears
What about a g56 to Allison swap? I'm
Tired of changing gears and dealing with dual disk clutches hopping and jerking with a load hooked to the truck.
Buy a truck with an auto....
@@ShainAndrews I'm all for that and have but unfortunately there's not an option for Cummins engine with Allison auto trans.
Do you have a kit for a 207.5 6.7?
What about a 03 3500 nv5600 to Allison
We are not offering anything for a manual to automatic conversion. There are several forums on what you need to do to do that conversion and once that is figured out on your end, then our conversion will work.
Is there an Allison kit for a 2000 dodge ram 3500 diesel 4x4?
Highly doubt there is room for it. Allison 1000/2000 is a substantial transmission.
How much for a 2013 3500 dullay
Can you install Alison auto Trans on 1997 Ford F-350 with 7.3 Diesel engine. I have manual drivetrain now.
Yes. This shop or ruclips.net/video/Rv8dyHTi_G0/видео.html should be able to help you
Do you guys do this swap for a 48re
Got transmissions for 4500 & 5500 ram late model
Yes we do offer our Performance AISIN Transmission or we can of course do the Allison Conversion
Just Buy a Dodge Ram, with a AISIN TRANSMISSION.
It's Cheaper.
Plus the cruise control works
Plus the Exhaust Brake Works
Plus the AISIN is stronger 💪 than the Allison.
Plus any Dodge Ram service Department can work on your truck.
Plus Factory Parts are available.
can you run a tuner with this conversion?
Went over this in the first 5 minutes. Transmission is tunable and the different HP ratings should tell you everything you need to know.
How much is the kit?
The kit ranges from $12,700 to $13,700. We can accept your 69RC Aisin or 68RFE as a Core. There is a refundable core charge $2,200 that is returned once we receive the unit and it passes inspection. Please give us a call to learn more and with any questions you may have. Thank you for your interest in our products! (800) 949-6002
@@ATSDieselPerformance, thank you
is there an Allison conversion for a 2005 Dodge ram 2500 5.9 cummins 4x4?
I'm looking for same for my 2007. I'm thinking from some of the numbers I was seeing that the conversion is more than the value of our trucks
@@MrRandyj72
Depends how much you like your truck. the new ones are nice, but I hear a lot of issues. I wish the conversion was more economical.
I’d rather spend on the CA conversion then paying 80+ on a new dually.
We I can afford it it’ll be CA Yellow.
Why don’t you guys make a kit to put a proper Eaton Fuller 10 speed in these trucks? This seems insane to spend all this money and and up with a bloody automatic transmission? Also some kits to put a manual in newer 6.7 Ford trucks would be sweet as one can’t even get a brand new one anymore with a manual transmission! Who is spending $90 grand on a new truck with a automatic? I sure as hell won’t I walked away when I couldn’t get a manual on a new one and the damn 6.7 Cummins was derated with a manual transmission! We need some kits to swap in Eaton Fuller Roadrangers into these Dodge Ford and GM pickups I’ve seen conversions done so they will fit.
The reason manual transmissions are no longer sold in heavy duty pickups is no one was buying them. If you are a member of a small group who want manual transmissions, good luck to you. Also wouldn't the Eaton Fuller 10 speed be huge and not fit easily?
I’m not paying for a new truck and shifting gears. The new truck trans hold the weight on most cases and manual is not needed like the old days.
Most people can't even drive a manual
Bought a rebuilt transmission from these guys
I had to send it back 2 times
Took 2 months to get it back
Tried calling them always a answer machine
Never again !
Allison?
I've had bad experience with this company. I never recommend them ! Bought 48re stage 1 and it was horrible build trans fluid was leaking from everywhere end up replacing 2 time they never pay for labor.
ATS is the worst place to by a transmission in less than two years I had to bring it back 7 time's and I'm having more problems in less than 32000 miles!!!!!!!
Real trucks don't shift themselves and manuals always outlast hydraulic transmissions by double or more.
Help please con
Asin is a much better transmission than the Allison.
You are smoking some serious dope