Anycubic Photon Mono 4K - 2023 - Setup and First Print - Resin 3D Printer Test
HTML-код
- Опубликовано: 25 авг 2024
- Welcome to the BGGT Maker channel!
In this video, I show you the setup process and the first test print of the Anycubic Photon Mono 4K resin 3D printer. This is my first 3D printer and I am just getting started with 3D modeling and printing. The original resin and original parameters were used to print the test cube model, but there is a problem, you can see it in the print pictures. Anycubic, why???
You can see the unboxing of this printer on my channel!
Thank you for watching!
Unboxing: • Best Resin 3D Printer ...
Specifications and description on the official website:
www.anycubic.c...
#3dprinting #3dprinter #anycubic #firstprint
Chapters:
0:05 - Platform installation and Z-axis adjustment
1:05 - Installing the Resin Tank
1:28 - Checking the LSD Screen
1:40 - Resin pouring
2:07 - Starting a Test Print
3:43 - Draining resin through the filter
4:08 - Wash in Isopropyl alcohol 99.9%
4:28 - Demonstration of the printed model
Thank you for watching!
Best setup video ever , straight forward to the point , thank you !
💚
really great vid!
Thanks 🙂
Love it, very straight forward.
I was following along the instructions that came with it, and it said that was the resin vat. Didn't believe it, shit looks like it's pulling the model out of the void. Not at all what I expected, but pretty cool
This video was really really helpful for me 😊
Thank you very much, I tried, I'm glad)))
he so I have a problem with mine do you think you can help me? here's the problem: when I print the test file (the test cube) when it's done, it doesn't come out like yours. so it comes out like a flat-smashed cube. can you help me out because I really wanna 3d print.
Loved the video, any tips on scrapping the finished product off the metal tray?
Friend, just practice)
What software should I use to make prints and get files from? Any recommendations?
Since I use a printer from Anycubic, and therefore work in the Photon Workshop program, I am completely satisfied with it...
what software should i use, complete noob to 3d printing but tech savvy. do i need to purchase a software?
I use PhtonWorkshop for slicing models for photopolymer 3D printing, it’s free. You can install it on the official Anikubik website. Thank you.
Please what volume of the resin did you use?
Volume of resin? It depends on what model you want to print... But I recommend filling the tray with the maximum volume, this way there will be fewer defects from bubbles)
Great video
I've got the 2k version love it
Think I'm going to get 4k now
Thank you!) This is my first printer, I really like the quality of its print!
@BGGT Maker What did you use to cure the print?
Great video,could u pass your settings of this resine?
I have one and I feel so dumb rn u just solved my problem thank you
Thanks, I'm glad I could help you :)
when you checked the detection, theres three options, you only checked one. do i select the smallest middle or largest. also when you pressed print, you did not pause and set the settings or does this model already have the settings done?
in this model, all settings are made in the sliser, thanks)
Can you screen shot settings please. I got mine with same resin but im having issues printing anything. Thankyou in advance.
What was your issue? I got my 13 yr old one for xmas, and we're having issues. The test print doesn't appear to be sticking to the build plate. Wish there were troubleshooting in the user manual!
@@tupaco47 Take wet sandpaper and scuff the build plate
What did you have the cube washing in once you were finished?
Isopropyl alcohol washes away resin residue well...
Just got the Mono x 4k. Complete beginner to resin printing. How do you know how much resin to pour in?
When you save a file in a slicer, it writes the print time and how much resin is needed, but it's better to pour the maximum, so there will be no bubbles and fewer print defects. But do not pour above the MAX. mark. 👌💚
The main thing is to set the correct parameters for the illumination of the layers!)
I have this same printer but every time I got to print something it just resets. I've already updated the firmware just don't know why it doesn't work
Bro, I don't know, this is a serious problem, it's better to contact the official Anycubic!...
Watching this machine pull an object out of goop blows my mind. How does this stuff work??
Hi!)
The essence of a 3D printer is as follows. The platform is lowered into the bath to a depth that depends on the thickness of the printed layer. Then a layer of the future model is projected onto it with a laser. Under its influence, the photopolymer hardens, that is, the formation of the part begins. The platform is then lowered to begin forming the second layer. And so on until a three-dimensional model is obtained. After printing is completed, the product is treated with special compounds to remove excess material. At the final stage of work, the part is placed in an ultraviolet chamber, in which it hardens.
@@bggtmaker Yeah, its not really that complex. No rocket science, lol. Just the usual interplay of chemistry and physics. No magic involved.
What is the solution at the end
Usually just isopropyl alcohol. 😊
Denatured alcohol may work better.
@@17larth 💪🏾💪🏾🙏🏽🙏🏽thank you
@@immaculatelation bet !!
Great video! I'm currently trying to get this (Anycubic Photon Mono 4K) or the Elegoo Mars 3 Pro 4K. Which would you best recommend? I'm a beginner to resin 3D printing and am selling the prints i make.
Thank you!) This is the first and only printer I have, I haven’t worked with others yet, so I can’t compare, but I was completely pleased with the Anycubic Photon Mono 4K and the print quality is good, it’s not difficult to figure out the settings...
@@bggtmaker Ah gotcha! Thank you for such a fast response!
@@bggtmaker Hey so I just got the printer and it is showing issues with recognizing my USB drive (it didn't come with one for the printer). I formatted my USB to FAT32 for it to recognize my .pwma files (which I sliced from the Photon Workshop slicer. Yet, the printer does not recognize anything. Have you had an issue like this before?
The kit should have included a flash drive, mostly red... It’s strange that you don’t have one(
I transferred files with my other card, there were no problems, the printer saw everything. Did you take a good look at the set? There should be a slicer installer and a test model of the cube for printing on the flash drive...
Also, if you are already using another flash drive, make sure that the printer model is correctly specified in the slicer settings!
What liquid did you shake it in?
To clean the resin I use 99.9% isopropyl alcohol.
how long does it took to print completely?
Depends on the settings, such as layer thickness and layer exposure time, this cube is about 2.5 hours, as far as I remember...
@@bggtmaker thanks for the reply. 😊
💚
Great video. Mine should be here on Monday.
How long did the photon cube take to print please?
Cheers bro ✌️
Tony, thanks for the comment, sorry for taking so long to reply. The printing time depends on the parameters that you specify in the program, I printed this cube in a few hours, I don’t remember exactly)
@@bggtmaker Unfortunately I managed to damage the screen before I even used mine. I forgot to tighten the build plate screw before I moved the machine. The corner of the bed went into the screen. Anycubic have been really good and have sent a replacement screen for free. Normally £90.00.
I have some tempered glass screen protectors to install on the new screen.
@@tonywharton5220 Mine took 3hrs and 53 minutes to print the anycubic cube
@@dustinscott8598 Cheers buddy. I'm all up and running now. The included cube wasn't the best print to be honest. I'm printing at .025 at 1.5 per layer. I'm getting really amazing results now ✌️
the proprietary FEP design built into the 4K is horrible.