There are several types of laminate which are approved for Steam Mops. The bevels on this one looks like it is one of them. My favorites are in the Revwood Line, the Plus and Premier lines. Budget laminates are far riskier. Water won't hurt the LVPs, but if you steam them to hot, you can have issues with peeling as the plastic wear layer delaminates. Note: I am a flooring professional... its my job
Been using a Shark on our cheap, floating laminate floors for almost 2 years now, every 2-4 weeks. Floors always look perfect, and there's been no changes, warping or damage.
I have been using a steam mop weekly on our laminate floors for 5 years. So far so good. My 3 boys and 2 Newfies are much more damaging to the floors than my steam mop 🤣
Thanks, just purchased the same Bissell steamer the other day. Was very pleased on the tile. Was wondering about my upstairs laminate floors. Will let it rip in a couple days. I will use the low setting. 👍🏼
We also have a steam mop on our laminate been using it for 2 years on new lam. My mop is the type that has two rotating pads. There are areas of damage on the laminate after using the steam mop.. It seems to damage the areas of the floor that were already having issues.. so it didn't cause the initial damage from what we can tell but if you have any areas where the laminate has any previous damage such as peeling or being loose or any gaps at all the steam mop def makes these things much worse.. we still use it we just avoid those few areas. we believe the home builder wasn't the best at flooring, and I also believe the rotating pads caused the lam to peel on the edges of the planks over time some what. This is using the lowest gentle setting possible water only being careful. if you have a perfectly tight laid floor job by a professional then im betting the results would be much like your explaining..😊. I bet some types of lam tolerate it better than others as well..
Thank you so much for taking the time and sharing!! I needed to stay away from fear and get the job done 🙏 I’ll be careful and try a spot in case I have a cheap laminated floor lol!
I've used steam for years too, no age. Most laminate floor companies say to damp mop with minimum water, too much water will damage. I think steam is different because of you use to lightest setting it evaporates quickly and isn't just sitting on the laminate.
Right around 4:35 I see some buckling of moisture along the seams, and then it dips in the after. Is that the same area? Was that from the steam mop? Or was there a spill or water damage that caused that?
Thanks for the video. Does the steam cleaning lift the stain from the laminate, which is why there is a brown stain on the mop? What is the brand of your linoleum? We are looking at Farbo marmoleum floors and their instructions do not say anything explicit about steam mop so we don't know if it's OK or not.
Awesome video! Love my steam mop! Especially since I have cats and often have dogs here. I call them “rented” dogs since I run a pet sitting business! 👍👍👍
You likely have pergo outlast+ floors. These are approved by the manufacturer for steam mopping. Mileage may vary for those with xp+. These are the ones that are not waterproof and have unsealed edges. You can tell the difference because your plank edges are sloped. XP+ doesn't have sloped edges.
Hi. Informative video. When you rinse off the cover, can you put it straight back on and continue steam cleaning - or do you need to let the cover dry first?
I'm not trying to sound sarcastic but why would you need to dry the pad if it's going to get wet from the steam anyway? In fact, I've read on other posts where some folks wet the pad before they begin use.
We just got a Shark steam mop - my floors are definitely clean but also sticky afterwards! Using distilled water and clean mop pads - absolutely no chemicals. Any thoughts on why the floors are sticky afterwards?
Have you heard of a film being left behind on the floor? I'm curious as to whether this is the water quality or if it's because the pads are dirty. Any feedback from any commenter is totally welcome! Thanks for sharing!
I have used the Bissell on tile and found that if you are running fast speed, more water, don’t let it sit in one location to long. Seems to leave to much water behind to dry, which can leave the unsightly streak appearing. I was very satisfied with my floors, could never get rid of the filmy reflection. After one use, I will not be using a mop ever again.
Can not really tell, but does your laminate click together so it only has a line where it joins or is it like mine that when clicked tight, it has a factory grove where dust and such collect. Did not notice this till purchases and laid down, grrrr.
We used a steam mop on our laminate flooring twice. If any water is on the floor for more than 10 mins now the laminate absorbs between the cracks and warps. They curl along their length. Must be really cheap laminate? It's seems the steam mop stripped any water repellency away.
I think its great that you would want to risk damaging your floors with steam. I hope you dont have any damage because you have voided your warranty and as far as I know your homeowners insurance will not cover damage due to stupidity.
UPDATE 8/11 - So far so good!
There are several types of laminate which are approved for Steam Mops.
The bevels on this one looks like it is one of them.
My favorites are in the Revwood Line, the Plus and Premier lines.
Budget laminates are far riskier.
Water won't hurt the LVPs, but if you steam them to hot, you can have issues with peeling as the plastic wear layer delaminates.
Note: I am a flooring professional... its my job
But what about the steam getting into crevises and creat mold underneath ? It's the only thing stopping me from getting a steam cleaner
Been using a Shark on our cheap, floating laminate floors for almost 2 years now, every 2-4 weeks. Floors always look perfect, and there's been no changes, warping or damage.
I’ve used my steam mop on my laminate floors for the past 2 years and absolutely no damage.
I have been using a steam mop weekly on our laminate floors for 5 years. So far so good. My 3 boys and 2 Newfies are much more damaging to the floors than my steam mop 🤣
Thanks, just purchased the same Bissell steamer the other day. Was very pleased on the tile. Was wondering about my upstairs laminate floors. Will let it rip in a couple days. I will use the low setting. 👍🏼
We also have a steam mop on our laminate been using it for 2 years on new lam. My mop is the type that has two rotating pads. There are areas of damage on the laminate after using the steam mop.. It seems to damage the areas of the floor that were already having issues.. so it didn't cause the initial damage from what we can tell but if you have any areas where the laminate has any previous damage such as peeling or being loose or any gaps at all the steam mop def makes these things much worse.. we still use it we just avoid those few areas. we believe the home builder wasn't the best at flooring, and I also believe the rotating pads caused the lam to peel on the edges of the planks over time some what. This is using the lowest gentle setting possible water only being careful. if you have a perfectly tight laid floor job by a professional then im betting the results would be much like your explaining..😊. I bet some types of lam tolerate it better than others as well..
I have a Shark steam mop that I've used religiously on my laminate floors. Does great❤
Thank you for clarifying the use of steam mops. I just purchased a new Bissell steam mop.
Thank you so much for taking the time and sharing!! I needed to stay away from fear and get the job done 🙏 I’ll be careful and try a spot in case I have a cheap laminated floor lol!
I've used steam for years too, no age. Most laminate floor companies say to damp mop with minimum water, too much water will damage. I think steam is different because of you use to lightest setting it evaporates quickly and isn't just sitting on the laminate.
Bissell makes the best floor cleaning products! Just my personal experience.
This is extremely helpful. I have laminate floors and really want to use one. Thank you so much. How often do you stream your floors?
Right around 4:35 I see some buckling of moisture along the seams, and then it dips in the after. Is that the same area? Was that from the steam mop? Or was there a spill or water damage that caused that?
Thanks for the video. Does the steam cleaning lift the stain from the laminate, which is why there is a brown stain on the mop? What is the brand of your linoleum? We are looking at Farbo marmoleum floors and their instructions do not say anything explicit about steam mop so we don't know if it's OK or not.
Thanks for this video.
Would engineered hardwood behave any different in your opinion?
Awesome video! Love my steam mop! Especially since I have cats and often have dogs here. I call them “rented” dogs since I run a pet sitting business! 👍👍👍
Love my Bissell steam mop. I have tile flooring.
Thank you!! I'm so glad you did this video!
Best model to use?
You likely have pergo outlast+ floors. These are approved by the manufacturer for steam mopping. Mileage may vary for those with xp+. These are the ones that are not waterproof and have unsealed edges. You can tell the difference because your plank edges are sloped. XP+ doesn't have sloped edges.
Can you use vinegar in there also?
No, just plain water. The acidity in vinegar will corrode the interior of your steam cleaner.
Hi. Informative video. When you rinse off the cover, can you put it straight back on and continue steam cleaning - or do you need to let the cover dry first?
I'm not trying to sound sarcastic but why would you need to dry the pad if it's going to get wet from the steam anyway? In fact, I've read on other posts where some folks wet the pad before they begin use.
@@brettlockrow9888😂😂😂😂
How do you ckean the mop head? Do you just toss it in the washing machine?
We just got a Shark steam mop - my floors are definitely clean but also sticky afterwards! Using distilled water and clean mop pads - absolutely no chemicals. Any thoughts on why the floors are sticky afterwards?
Have you heard of a film being left behind on the floor? I'm curious as to whether this is the water quality or if it's because the pads are dirty. Any feedback from any commenter is totally welcome! Thanks for sharing!
I have used the Bissell on tile and found that if you are running fast speed, more water, don’t let it sit in one location to long. Seems to leave to much water behind to dry, which can leave the unsightly streak appearing. I was very satisfied with my floors, could never get rid of the filmy reflection. After one use, I will not be using a mop ever again.
We've had lament floors for many years and have always used a steam mop. We've never experienced any damage from th emop at all.
Hey btw the vacuum linked in the description isn’t the one shown in the video, the one you have is the shark stratos.
PS I a love your videos.
Can not really tell, but does your laminate click together so it only has a line where it joins or is it like mine that when clicked tight, it has a factory grove where dust and such collect. Did not notice this till purchases and laid down, grrrr.
I loved mine!😊❤ on my laminate floors 😊
We used a steam mop on our laminate flooring twice. If any water is on the floor for more than 10 mins now the laminate absorbs between the cracks and warps. They curl along their length. Must be really cheap laminate? It's seems the steam mop stripped any water repellency away.
Does anyone rinse out the mop several times while mopping the floor?
That looks like real wood grain with all the grooves... does not look like laminate flooring lol
Love my Shark steamer. Will never use a mop again.
Mine warped so bad after using the steam mop. But my laminate floor wasn’t ul listed and was random Ali express garbage haha
Do not leave mop standing in one spot will leave a mark.
I think its great that you would want to risk damaging your floors with steam. I hope you dont have any damage because you have voided your warranty and as far as I know your homeowners insurance will not cover damage due to stupidity.
Anyone tried this on LVP flooring for a long period of time?
vinyl should be fine - it's plastic and supposed to be waterproof
Looks like tile in a wood pattern
Anyone use one on their RV laminate floor?
Your floor looks more like engineered wooden flooring than laminate
Did not say CAN says MAY. That is a disclaimer word.
You can use water from dehumidifier. It’s also safe for plants. 🪴
You can use water from dehumidifier. It’s also safe for plants. 🪴