2019+ Ram 1500/Rebel Sport Tow/Haul Shock Install | Falcon Shocks

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 21

  • @nabatron21
    @nabatron21 4 года назад +3

    Should show before and after of what the truck looks like

  • @abelvillegas1321
    @abelvillegas1321 4 года назад +1

    What would be the correct level setting, if you riding a 2.5 spacer? truck rides perfectly leveled. Seems like these shocks only give the rebel 1.25 level since the coil springs are taller from factory. Will medium setting work? Or will it raise it more then the 2.5 spacer kit?

  • @USSEnterpriseCVBB1
    @USSEnterpriseCVBB1 4 года назад +1

    I know the website says these do not pair with the air suspension, but if I were to change the air system to just all OEM coils, would the truck need any more modifications? Have my eye on a 2019 Ram but living in the north, I'd be lucky to have all 4 air struts see 3 winters. Wanna know what I would need for replacements. Also what qualifies as "heavy"? Is there a weight above OEM threshold?

    • @FalconPerformanceShocks
      @FalconPerformanceShocks  4 года назад

      Please give us a call and we can give you some more details. Its mainly just compatibility and installation interference. But would love to talk about the different options. 801-713-3314

  • @normanjames4117
    @normanjames4117 2 года назад

    hello i purchased the falcon shocks with the reservoir for my 2019 ram rebel 1500 when you first released the shocks for the 5th gen rams, the garage that i had install them put installed them with the reservoir to the front because they thought the reservoir and knob would hit the frame of the ram, do it matter for performance that the reservoir is facing the front.

    • @FalconPerformanceShocks
      @FalconPerformanceShocks  2 года назад

      As long as the reservoir does not come into contact with anything it should be fine.

  • @etotheizzo9888
    @etotheizzo9888 2 года назад

    There’s a section that says to “remove the support from the lower control arms” which I’m hoping to gain clarity on since nowhere in the beginning was there an indication that LCA needed support. Is the support for LCA required?

    • @FalconPerformanceShocks
      @FalconPerformanceShocks  2 года назад +1

      Placing a support under the LCA makes separating the upper ball joint easier. It's not strictly necessary.

  • @nflo873
    @nflo873 3 года назад

    Im interested in this setup bit want more detailed specs on the front shocks. Ie size diameter, shaft diameter, etc. Tks

    • @FalconPerformanceShocks
      @FalconPerformanceShocks  3 года назад

      The body of the shock is 2.25" and the shaft diameter is .75" hardened chrome.

  • @stronglikebull2994
    @stronglikebull2994 3 года назад

    Any need to replace the UCA's? Heard a rumor you guys maybe offering some in the future?

    • @FalconPerformanceShocks
      @FalconPerformanceShocks  3 года назад

      Nope factory UCAs are just fine. At this time we wont be offering anything different.

  • @MrDrewgle
    @MrDrewgle 3 года назад

    Hi, what is the eye to eye measurement on the rear @ full extension and full compression.

  • @zacharyfike1071
    @zacharyfike1071 3 года назад

    Do you need upper control arms for this?

  • @raulibarra4474
    @raulibarra4474 4 года назад +1

    Can I fit 35x12.5 with this lift kit?

    • @FalconPerformanceShocks
      @FalconPerformanceShocks  4 года назад

      Throughout our testing the max we could fit was a 315/70R17 .
      Which equates to be about 34.4x12.4R17. Unfortunately a 35X12.50 is just over our max tire size recommendation. If installed you may have a little bit of rubbing.

  • @edcorrea1788
    @edcorrea1788 4 года назад +1

    Nice

  • @cjd3789
    @cjd3789 3 года назад

    What's the est installing time for it?