I installed new wheels and tires on my 2007 Nissan Xterra!! Black Rhino Chamber!!
HTML-код
- Опубликовано: 21 май 2021
- In this video I lay out the specs for my wheel and tire combo along with giving an overview of the ceramic coating process. One addition that I have done since purchasing the wheels is getting some hub rings. The hub for the Xterra is 66.1mm and the bore for the wheels is 76.1mm. I like using the rings because it helps me to align the lug nuts better when fitting the wheels. If you have any questions about this video please leave them in the comments below. Thanks for watching!
2:00 Wheel and tire specs
#blackrhinowheels #nissanxterra #coopertires 
Авто/Мото
Can't go wrong with the black rhino's, I have the black rhino's shogun on my 2012 tacoma "16 with -10 offset in black to match the rest of my truck, on 265/75/r16 toyo open country rt trails 👌🏾😎
💯. They definitely set off the truck.
Looks great man👍🏾
Thanks! I appreciate it. Many more upgrades to come.
Looks awesome 👏
Thanks! I was on the fence about buying these wheels, because you never know 100% how they'll look until they're on. After installation I've been very pleased.
@@TheNonnell no rubbing issues aside from the area in the fender well mentioned in your video?
That is correct. Again, I only notice it whenever going full lock side to side. Usually, Nissan owners will do what is called a melt mod to make clearance for that small rub, but so far it hasn't bothered anything. Just a slight audible sound under full lock.
Look Awesome!!! Great video! I'm thinking to get new wheel on Pro-4X also. Thank for sharing.
You're welcome! Thanks for the comment. What type of wheels are you looking to buy?
@@TheNonnell oh I like Method Race Wheel 16x7 Black
Nice! I like Method. Good choice.
I have a 2008 and I bought it with aftermarket rims n tires. Bf goodrich a/t and I think the same size. They rubbed, so I heated the wheel well plastic and molded it a bit. It worked! Then last year I had to get new tires, got the same and it rubs slightly due to more tread. Now I just let it be lol
Yeah man. As I'm sure you've noticed it isn't that big of a deal and doesn't happen all the time. I didn't think it was worth the effort to get that small amount of plastic pushed back. Hardly even notice anymore. Thanks for sharing.
The car look great with the new tires. I like the size of the tires also.
Thanks! The fit and look is exactly what I wanted. I’ve really enjoyed them.
hey do you still have this truck?@@TheNonnell
@@lamasterbatonlll1383 I still have the Xterra. It has about 223k miles on it now and runs perfectly. I recently fixed my roof, installed new rivnuts, and reinstalled my headliner. It's complete once again. I absolutely love my Xterra.
Looks great! I'm guessing your spare is the full size you took off. Any concerns about size difference if needing to use it?
Thanks! Yes, my spare is OEM. I plan to replace my rear bumper with one that has a tire carrier so I can fit a new full size spare. Hopefully no flats between now and then. 😬
Awesome set up , have you noticed any damage to the tires over time from the rubbing, or have issues going over rocks bumps when the wheel is turned or just going straight? would you recommend getting 265x65x18 tires? thanks!
Thanks for the comment! I have not noticed any damage to the wheels/tires from scraping against the fender lining. Also, I haven't noticed any rubbing going over objects. That being said, I haven't done any off-roading on this setup to where I would be at full articulation of the suspension. It looks like the 265/65r18 is very similar to the diameter of what I'm running now. I would assume that would be alright. If I'm not mistaken, I stayed away from the 18s due to lack of options and price. Best of luck!
Nice wheels! I have (black)" Vision assassin" Wheels & Falken wild peak at3w tires on my X.
Thanks! Very cool. Are your wheels matte or shiny?
@@TheNonnell matte... 👍
Nice!
I dont know enough about ceramic coating a new wheel so is it for protection of the wheel? I was really happy to see this after the tire shop said I could not go up toa 17 inch wheel without a lift
Ceramic coating is for some level of “protection”. It offers protection for the paint on the wheels. It doesn’t protect against rock chips or curb rash. Also, it makes cleaning the wheels so much easier. It’s probably overkill, but I really like these wheels and wanted to take extra care of them. Beside the little rub at full lock, I don’t have any issues with these wheels. Also, you could look up how to do the melt mod which everyone talks about and that would take care of the rub. Best of luck!
Hey awesome video! Just bought an 08 S and was looking at slightly bigger tires/wheels. 275/70 or 75 is what I'm thinking. I'm in NC too, there's some good trails in the state
Thanks! Bigger tires is definitely where it's at. In my opinion it really transforms the look of the X. Where in NC are you? I'm outside of Charlotte. I've been to Uwharrie a few times, but haven't really been anywhere else to try trails yet. I'm hoping to get out and do more wheeling this spring.
@@TheNonnell I'm up in Ashe county but grew up in north Charlotte. There's a pretty good trail in Blowing Rock off 321 but I haven't been on it in about 10 years.
@@ifoundjesusbehindthecouch6261 I frequent Blowing Rock and Boone often. Do you know if there is a certain name to that trail? If so, I'll check it out. Thanks!
@@TheNonnell look up richland road off 321 when you come up through blowing rock. I took my old 93 Ford explorer there (100% stock) and didn't have any problems getting stuck. After doing some reading, it seems people have had issues with landowners, maybe look more into it if you decide to ride out.
@@ifoundjesusbehindthecouch6261 Thanks. I'll check into it.
Was told these wheel requires spacer to clear the front caliper. Did you have you use spacers?
Good question. I checked multiple websites before I bought these wheels bc I was unsure of the fitment. Fortunately, I can say that for my 07 Xterra and this set of black rhino wheels, they fit perfectly. There isn’t a huge amount of space between wheel and caliper, but there is clearance and I haven’t had any issues.
Anyone know a rim size for a stock 2010 i want them to poke like 2 inches
I don’t have a specific size for ya but if you know what offset the OEM wheel is then you can determine how much poke you’d get by the aftermarket offset.
Zero Offset
The hub mounting surface is even with the centerline of the wheel.
Positive
The hub mounting surface is located in the front half of the wheel closer to the wheel face. This tucks the entire wheel in toward the brakes and vehicle suspension. Positive offset wheels are generally found on front-wheel drive cars and newer rear-wheel drive cars.
Negative
The hub mounting surface is located in the back half of the wheel closer to the back lip flange. This moves the wheel out away from the vehicle brakes and suspension. "Deep dish" wheels and wheels for lifted trucks are typically a negative offset.
Those are sweet wheels.. Do you know if they come in 16" I'd love them for a winter set. And the melt mod is really nothing at all.. you won't even need to do too much of it.. Did you swap your seats.. I have an 07OR as well but not that seat cover (you have an SE is guess.. anyhow.. again nice wheels.. Btw most Xterra owners with OR, go with 285-75-16..
Thank you! I love my wheels. I think they come in 16, 17, 18, and 20 inches. I have not swapped my seats. My Xterra is an "X" trim. Not sure how the seats differ, but that is what I have. Thanks again for the comment and best of luck getting some wheels.
What about 33or35
I bought the Black Rhino Warthogs 6x114.3 offset 0 with 4.75 backspacing running 285 70 17 I am hoping the wheel will stick out from the wheel well a bit at least and 1.5 inches? for my 2022 frontier with leveling kit
Nice! That’s gonna look sick. New Frontiers 👍🏻. Love the new body style.
what's the bolt pattern on your Xterra and the offset on the rims?
@@Ryux4x4 I believe it is 6 lug 4.5 inch or 114.3mm Medium Offset
Tires aren’t aggressive looking enough for me. I would have gone MT’s Baja Boss
Yeah, I wasn’t sure about the road noise of MTs so I stayed away from them. I’m sure they would have looked more aggressive and potentially better grip, but I need my sanity while driving on road.
What lug pattern are the rims are they 6x5.5?
I believe they’re 6 x 4.5”
Hey bro your Xterra look really good I have a 2010 I would like to get the same set of tires & rims can you tell me the size & rim model thanks 🙏
Sure. 2:00 minute mark of the video I believe I cover the specifications. Thanks!
How much do you spend for all four wheels bro?
Hey. I went through discount tire and they ran about $1800 for wheels, tires, TPMS sensors, and mounting and balancing.
Lift? I just got an xterra and want some new wheels and tires but not ready for a lift
I haven't installed a lift yet, but it is in my future plans. I've been looking at Nisstec for some possibilities. No need for a lift with this setup of wheels and tires. There is a slight amount of rub, but it's very minor.
What are the specs for the rims ? Offset , backspacing ?
I believe it was covered in the video....maybe around the 2:02 mark. Hope that helps. Thanks!
What was the tire size beforehand? My 2006 Xterra says 265/75/16 is the stock size
265/70 R16 was what came on it. I think that's standard across the board for these vehicles. I definitely prefer the upgraded wheels and tires I have now. The look with the aftermarket wheels fits the Xterra so much better.
@@TheNonnell oh wow so that +5 in the tires aspect ratio really made a difference.. nice!
@@_moes_garage_ I’m not sure what you mean but I’m running 265/70 R17 now. The wheels made the most difference with their offset. They make the Xterra look more muscular.
@@TheNonnell oh I see... My mistake. I thought you went from 265/70/16 to 265/75/16 🤣
Great choice on the wheels btw. Those look very nice and aggressive 👍
how do these new wheels differ from the stock on the xterra?
The wheels have a different offset, causing them to slightly protrude. To ensure a precise fit, a hub ring is needed. Additionally, these wheels are wider than the standard ones. I love them.
@@TheNonnell do you know what the offset is on these new wheels? thanks! hope you are enjoying this nice weather here in El Cakalaky del Norte!
@@TheNonnell yeah, thinnking very hard about getting rid of my xterra for a new(ish) frontier.... love the look of the pro4x, but cant justify the price when its just the look I like, other than 4WD, dont need skid plates etc cause I all do is beach driving, so I thought maybe cheaper to just change the tires/wheels on a SV to get closer to the pro4x look, so trying to understand the nomenclature of the process...
🤔 don’t quote me, but I believe they were a zero offset.
I have 2007 Nissan xterra and I want to buy tires that looks kinda aggressive and stick out without wheel spacers, it's a stock xterra, I have not put a left on it yet
I meant to say I have not put a lift kit on it yet my bad
I was thinking about putting 285/75/16 on it, I don't know if it will rub or not
So, that’s close to a 33in I believe. You’re running stock wheels? It may rub. Those are larger diameter than the wheel/tire combo that I have now and mine rub a little.
@@TheNonnell idk what to do yet, but do you know if I can try different Tires at a tire place if they let you or no
I might do that if they let me do that so I try out different things
Well I know what wheels I’m getting now 😂
They’re pretty sick. I’ve been very happy with this purchase.
Is your xterra 4x4?
Hey! Yes, it’s 4 wheel drive.
Any plans on baptizing those new tires in some mud? That would make a great video.
Hey! At some point in time I plan to put it through its paces. Honestly, I’m so backed up with videos needing editing and other projects in the pipeline, that I haven’t had time. Hopefully, sooner than later.
@@TheNonnell yeah I can imagine especially now that you have the Lexus to work on. Don't spread yourself to thin.
The tire you picked is almost the same tire height that came stock on the Off-Road and PRO-4X models according to the tire charts that I’ve seen. I think it’s your new offset wheels that’s causing it to rub. A good short video that I watched goes into detail on offset. ruclips.net/video/GVqVQj49KDc/видео.html
My offset and tires size, 100%. PRO-4X comes with different suspension than my X giving it more clearance for larger tires. It’s ok though, I don’t mind the rub.
@@TheNonnell do the melt mod, it'll solve the rubbing issue.
@@shift6058 Thanks. Eventually, maybe. I have so many other projects right now, it'll have to be put on the back burner. I'm sure it would be nice to not have the rub though.
@@TheNonnell it's super simple, only takes a few minutes. thankfully
Good content, and for wearing a mask I gave you a dislike smh
Hmm. Interesting comment. 🤷♂️
nice cloth mask lmaoo
Grow up bro
Take the communist musk off
You were referring to the mask? Different time and situation then what we find ourselves in today.